100% found this document useful (1 vote)

150 views61 pages

International Limited: BOP Bonnet Pin

This document contains 12 visual examination and magnetic particle inspection reports for BOP bonnet pins from a Sedco 702 rig. Each report details the inspection of a single pin by equipment name, ID, location, specification, parts examined, findings, recommendations, client, and inspector details. All pins were found to be fit for use with no defects.

Uploaded by

Michael Okwuwa

We take content rights seriously. If you suspect this is your content, claim it here.

Available Formats

Download as PDF, TXT or read online on Scribd

100% found this document useful (1 vote)

150 views61 pages

International Limited: BOP Bonnet Pin

Uploaded by

Michael Okwuwa

We take content rights seriously. If you suspect this is your content, claim it here.

Available Formats

Download as PDF, TXT or read online on Scribd

You are on page 1/ 61

JCInternationalLimited

RC.413243
Port Harcourt Office: Plot 5 JC Street, Off Peter Odili Road, P.O. Box 6427 Trans Amadi Port Harcourt, Rivers State. Tel: +234-84-489909 Lagos Office: 56A Bourdillon Road, P.O. Box 52224 Ikoyi. Tel: +234-1-842-5813 E-mail: [email protected] Website: www.jcinternationalng.com

VISUAL EXAMINATION AND MAGNETIC PARTICLE INSPECTION REPORT FOR BOP BONNET PIN REPORT No: 50585

Equipment Name: Equipment ID: Location: Specification: Parts Examined:

BOP Bonnet Pin P 25 BOP Area ASTM E 1444 Load Bearing Area (Excluding Thread) None Fit for Use Transocean Support Services Sedco 702

Defect Found: Recommendation: Name of Client: Place of Inspection:

Inspectors Name/Qualification
CHINEDU OGBONNA
SNT Level II MT, PT, UT Lifting Equipment Insp.

Signature/Date

11 / 2011

JCInternationalLimited
RC.413243
Port Harcourt Office: Plot 5 JC Street, Off Peter Odili Road, P.O. Box 6427 Trans Amadi Port Harcourt, Rivers State. Tel: +234-84-489909 Lagos Office: 56A Bourdillon Road, P.O. Box 52224 Ikoyi. Tel: +234-1-842-5813 E-mail: [email protected] Website: www.jcinternationalng.com

VISUAL EXAMINATION AND MAGNETIC PARTICLE INSPECTION REPORT FOR BOP BONNET PIN REPORT No: 50586

Equipment Name: Equipment ID: Location: Specification: Parts Examined:

BOP Bonnet Pin P 19 BOP Area ASTM E 1444 Load Bearing Area (Excluding Thread) None Fit for Use Transocean Support Services Sedco 702

Defect Found: Recommendation: Name of Client: Place of Inspection:

Inspectors Name/Qualification
CHINEDU OGBONNA
SNT Level II MT, PT, UT Lifting Equipment Insp.

Signature/Date

11 / 2011

VISUAL EXAMINATION AND MAGNETIC PARTICLE INSPECTION REPORT FOR BOP BONNET PIN REPORT No: 50587

Equipment Name: Equipment ID: Location: Specification: Parts Examined:

BOP Bonnet Pin P 26 BOP Area ASTM E 1444 Load Bearing Area (Excluding Thread) None Fit for Use Transocean Support Services Sedco 702

Defect Found: Recommendation: Name of Client: Place of Inspection:

Inspectors Name/Qualification
CHINEDU OGBONNA
SNT Level II MT, PT, UT Lifting Equipment Insp.

Signature/Date

11 / 2011

VISUAL EXAMINATION AND MAGNETIC PARTICLE INSPECTION REPORT FOR BOP BONNET PIN REPORT No: 50588

Equipment Name: Equipment ID: Location: Specification: Parts Examined:

BOP Bonnet Pin P 20 BOP Area ASTM E 1444 Load Bearing Area (Excluding Thread) None Fit for Use Transocean Support Services Sedco 702

Defect Found: Recommendation: Name of Client: Place of Inspection:

Inspectors Name/Qualification
CHINEDU OGBONNA
SNT Level II MT, PT, UT Lifting Equipment Insp.

Signature/Date

11 / 2011

VISUAL EXAMINATION AND MAGNETIC PARTICLE INSPECTION REPORT FOR BOP BONNET PIN REPORT No: 50589

Equipment Name: Equipment ID: Location: Specification: Parts Examined:

BOP Bonnet Pin P 23 BOP Area ASTM E 1444 Load Bearing Area (Excluding Thread) None Fit for Use Transocean Support Services Sedco 702

Defect Found: Recommendation: Name of Client: Place of Inspection:

Inspectors Name/Qualification
CHINEDU OGBONNA
SNT Level II MT, PT, UT Lifting Equipment Insp.

Signature/Date

11 / 2011

VISUAL EXAMINATION AND MAGNETIC PARTICLE INSPECTION REPORT FOR BOP BONNET PIN REPORT No: 50590

Equipment Name: Equipment ID: Location: Specification: Parts Examined:

BOP Bonnet Pin P 24 BOP Area ASTM E 1444 Load Bearing Area (Excluding Thread) None Fit for Use Transocean Support Services Sedco 702

Defect Found: Recommendation: Name of Client: Place of Inspection:

Inspectors Name/Qualification
CHINEDU OGBONNA
SNT Level II MT, PT, UT Lifting Equipment Insp.

Signature/Date

11 / 2011

VISUAL EXAMINATION AND MAGNETIC PARTICLE INSPECTION REPORT FOR BOP BONNET PIN REPORT No: 50591

Equipment Name: Equipment ID: Location: Specification: Parts Examined:

BOP Bonnet Pin P 22 BOP Area ASTM E 1444 Load Bearing Area (Excluding Thread) None Fit for Use Transocean Support Services Sedco 702

Defect Found: Recommendation: Name of Client: Place of Inspection:

Inspectors Name/Qualification
CHINEDU OGBONNA
SNT Level II MT, PT, UT Lifting Equipment Insp.

Signature/Date

11 / 2011

VISUAL EXAMINATION AND MAGNETIC PARTICLE INSPECTION REPORT FOR BOP BONNET PIN REPORT No: 50592

Equipment Name: Equipment ID: Location: Specification: Parts Examined:

BOP Bonnet Pin P 27 BOP Area ASTM E 1444 Load Bearing Area (Excluding Thread) None Fit for Use Transocean Support Services Sedco 702

Defect Found: Recommendation: Name of Client: Place of Inspection:

Inspectors Name/Qualification
CHINEDU OGBONNA
SNT Level II MT, PT, UT Lifting Equipment Insp.

Signature/Date

11 / 2011

VISUAL EXAMINATION AND MAGNETIC PARTICLE INSPECTION REPORT FOR BOP BONNET PIN REPORT No: 50593

Equipment Name: Equipment ID: Location: Specification: Parts Examined:

BOP Bonnet Pin P 35 BOP Area ASTM E 1444 Load Bearing Area (Excluding Thread) None Fit for Use Transocean Support Services Sedco 702

Defect Found: Recommendation: Name of Client: Place of Inspection:

Inspectors Name/Qualification
CHINEDU OGBONNA
SNT Level II MT, PT, UT Lifting Equipment Insp.

Signature/Date

11 / 2011

VISUAL EXAMINATION AND MAGNETIC PARTICLE INSPECTION REPORT FOR BOP BONNET PIN REPORT No: 50594

Equipment Name: Equipment ID: Location: Specification: Parts Examined:

BOP Bonnet Pin P 38 BOP Area ASTM E 1444 Load Bearing Area (Excluding Thread) None Fit for Use Transocean Support Services Sedco 702

Defect Found: Recommendation: Name of Client: Place of Inspection:

Inspectors Name/Qualification
CHINEDU OGBONNA
SNT Level II MT, PT, UT Lifting Equipment Insp.

Signature/Date

11 / 2011

VISUAL EXAMINATION AND MAGNETIC PARTICLE INSPECTION REPORT FOR BOP BONNET PIN REPORT No: 50595

Equipment Name: Equipment ID: Location: Specification: Parts Examined:

BOP Bonnet Pin P 36 BOP Area ASTM E 1444 Load Bearing Area (Excluding Thread) None Fit for Use Transocean Support Services Sedco 702

Defect Found: Recommendation: Name of Client: Place of Inspection:

Inspectors Name/Qualification
CHINEDU OGBONNA
SNT Level II MT, PT, UT Lifting Equipment Insp.

Signature/Date

11 / 2011

VISUAL EXAMINATION AND MAGNETIC PARTICLE INSPECTION REPORT FOR BOP BONNET PIN REPORT No: 50596

Equipment Name: Equipment ID: Location: Specification: Parts Examined:

BOP Bonnet Pin P 37 BOP Area ASTM E 1444 Load Bearing Area (Excluding Thread) None Fit for Use Transocean Support Services Sedco 702

Defect Found: Recommendation: Name of Client: Place of Inspection:

Inspectors Name/Qualification
CHINEDU OGBONNA
SNT Level II MT, PT, UT Lifting Equipment Insp.

Signature/Date

11 / 2011

VISUAL EXAMINATION AND MAGNETIC PARTICLE INSPECTION REPORT FOR BOP BONNET PIN REPORT No: 50597

Equipment Name: Equipment ID: Location: Specification: Parts Examined:

BOP Bonnet Pin P 31 BOP Area ASTM E 1444 Load Bearing Area (Excluding Thread) None Fit for Use Transocean Support Services Sedco 702

Defect Found: Recommendation: Name of Client: Place of Inspection:

Inspectors Name/Qualification
CHINEDU OGBONNA
SNT Level II MT, PT, UT Lifting Equipment Insp.

Signature/Date

11 / 2011

VISUAL EXAMINATION AND MAGNETIC PARTICLE INSPECTION REPORT FOR BOP BONNET PIN REPORT No: 50598

Equipment Name: Equipment ID: Location: Specification: Parts Examined:

BOP Bonnet Pin P 32 BOP Area ASTM E 1444 Load Bearing Area (Excluding Thread) None Fit for Use Transocean Support Services Sedco 702

Defect Found: Recommendation: Name of Client: Place of Inspection:

Inspectors Name/Qualification
CHINEDU OGBONNA
SNT Level II MT, PT, UT Lifting Equipment Insp.

Signature/Date

11 / 2011

VISUAL EXAMINATION AND MAGNETIC PARTICLE INSPECTION REPORT FOR BOP BONNET PIN REPORT No: 50599

Equipment Name: Equipment ID: Location: Specification: Parts Examined:

BOP Bonnet Pin P 21 BOP Area ASTM E 1444 Load Bearing Area (Excluding Thread) None Fit for Use Transocean Support Services Sedco 702

Defect Found: Recommendation: Name of Client: Place of Inspection:

Inspectors Name/Qualification
CHINEDU OGBONNA
SNT Level II MT, PT, UT Lifting Equipment Insp.

Signature/Date

11 / 2011

VISUAL EXAMINATION AND MAGNETIC PARTICLE INSPECTION REPORT FOR BOP BONNET PIN REPORT No: 50600

Equipment Name: Equipment ID: Location: Specification: Parts Examined:

BOP Bonnet Pin P 30 BOP Area ASTM E 1444 Load Bearing Area (Excluding Thread) None Fit for Use Transocean Support Services Sedco 702

Defect Found: Recommendation: Name of Client: Place of Inspection:

Inspectors Name/Qualification
CHINEDU OGBONNA
SNT Level II MT, PT, UT Lifting Equipment Insp.

Signature/Date

11 / 2011

VISUAL EXAMINATION AND MAGNETIC PARTICLE INSPECTION REPORT FOR BOP BONNET PIN REPORT No: 50601

Equipment Name: Equipment ID: Location: Specification: Parts Examined:

BOP Bonnet Pin HT 2239388 BOP Area ASTM E 1444 Load Bearing Area (Excluding Thread) None Fit for Use Transocean Support Services Sedco 702

Defect Found: Recommendation: Name of Client: Place of Inspection:

Inspectors Name/Qualification
CHINEDU OGBONNA
SNT Level II MT, PT, UT Lifting Equipment Insp.

Signature/Date

11 / 2011

VISUAL EXAMINATION AND MAGNETIC PARTICLE INSPECTION REPORT FOR BOP BONNET PIN REPORT No: 50602

Equipment Name: Equipment ID: Location: Specification: Parts Examined:

BOP Bonnet Pin P 34 BOP Area ASTM E 1444 Load Bearing Area (Excluding Thread) None Fit for Use Transocean Support Services Sedco 702

Defect Found: Recommendation: Name of Client: Place of Inspection:

Inspectors Name/Qualification
CHINEDU OGBONNA
SNT Level II MT, PT, UT Lifting Equipment Insp.

Signature/Date

11 / 2011

VISUAL EXAMINATION AND MAGNETIC PARTICLE INSPECTION REPORT FOR BOP BONNET PIN REPORT No: 50603

Equipment Name: Equipment ID: Location: Specification: Parts Examined:

BOP Bonnet Pin P 29 BOP Area ASTM E 1444 Load Bearing Area (Excluding Thread) None Fit for Use Transocean Support Services Sedco 702

Defect Found: Recommendation: Name of Client: Place of Inspection:

Inspectors Name/Qualification
CHINEDU OGBONNA
SNT Level II MT, PT, UT Lifting Equipment Insp.

Signature/Date

11 / 2011

VISUAL EXAMINATION AND MAGNETIC PARTICLE INSPECTION REPORT FOR BOP BONNET PIN REPORT No: 50604

Equipment Name: Equipment ID: Location: Specification: Parts Examined:

BOP Bonnet Pin P 47 BOP Area ASTM E 1444 Load Bearing Area (Excluding Thread) None Fit for Use Transocean Support Services Sedco 702

Defect Found: Recommendation: Name of Client: Place of Inspection:

Inspectors Name/Qualification
CHINEDU OGBONNA
SNT Level II MT, PT, UT Lifting Equipment Insp.

Signature/Date

11 / 2011

VISUAL EXAMINATION AND MAGNETIC PARTICLE INSPECTION REPORT FOR BOP BONNET PIN REPORT No: 50605

Equipment Name: Equipment ID: Location: Specification: Parts Examined:

BOP Bonnet Pin P 50 BOP Area ASTM E 1444 Load Bearing Area (Excluding Thread) None Fit for Use Transocean Support Services Sedco 702

Defect Found: Recommendation: Name of Client: Place of Inspection:

Inspectors Name/Qualification
CHINEDU OGBONNA
SNT Level II MT, PT, UT Lifting Equipment Insp.

Signature/Date

11 / 2011

VISUAL EXAMINATION AND MAGNETIC PARTICLE INSPECTION REPORT FOR BOP BONNET PIN REPORT No: 50606

Equipment Name: Equipment ID: Location: Specification: Parts Examined:

BOP Bonnet Pin P 49 BOP Area ASTM E 1444 Load Bearing Area (Excluding Thread) None Fit for Use Transocean Support Services Sedco 702

Defect Found: Recommendation: Name of Client: Place of Inspection:

Inspectors Name/Qualification
CHINEDU OGBONNA
SNT Level II MT, PT, UT Lifting Equipment Insp.

Signature/Date

11 / 2011

VISUAL EXAMINATION AND MAGNETIC PARTICLE INSPECTION REPORT FOR BOP BONNET PIN REPORT No: 50607

Equipment Name: Equipment ID: Location: Specification: Parts Examined:

BOP Bonnet Pin P 48 BOP Area ASTM E 1444 Load Bearing Area (Excluding Thread) None Fit for Use Transocean Support Services Sedco 702

Defect Found: Recommendation: Name of Client: Place of Inspection:

Inspectors Name/Qualification
CHINEDU OGBONNA
SNT Level II MT, PT, UT Lifting Equipment Insp.

Signature/Date

11 / 2011

VISUAL EXAMINATION AND MAGNETIC PARTICLE INSPECTION REPORT FOR BOP BONNET PIN REPORT No: 50608

Equipment Name: Equipment ID: Location: Specification: Parts Examined:

BOP Bonnet Pin P 11 BOP Area ASTM E 1444 Load Bearing Area (Excluding Thread) None Fit for Use Transocean Support Services Sedco 702

Defect Found: Recommendation: Name of Client: Place of Inspection:

Inspectors Name/Qualification
CHINEDU OGBONNA
SNT Level II MT, PT, UT Lifting Equipment Insp.

Signature/Date

11 / 2011

VISUAL EXAMINATION AND MAGNETIC PARTICLE INSPECTION REPORT FOR BOP BONNET PIN REPORT No: 50609

Equipment Name: Equipment ID: Location: Specification: Parts Examined:

BOP Bonnet Pin P 40 BOP Area ASTM E 1444 Load Bearing Area (Excluding Thread) None Fit for Use Transocean Support Services Sedco 702

Defect Found: Recommendation: Name of Client: Place of Inspection:

Inspectors Name/Qualification
CHINEDU OGBONNA
SNT Level II MT, PT, UT Lifting Equipment Insp.

Signature/Date

11 / 2011

VISUAL EXAMINATION AND MAGNETIC PARTICLE INSPECTION REPORT FOR BOP BONNET PIN REPORT No: 50610

Equipment Name: Equipment ID: Location: Specification: Parts Examined:

BOP Bonnet Pin P 42 BOP Area ASTM E 1444 Load Bearing Area (Excluding Thread) None Fit for Use Transocean Support Services Sedco 702

Defect Found: Recommendation: Name of Client: Place of Inspection:

Inspectors Name/Qualification
CHINEDU OGBONNA
SNT Level II MT, PT, UT Lifting Equipment Insp.

Signature/Date

11 / 2011

VISUAL EXAMINATION AND MAGNETIC PARTICLE INSPECTION REPORT FOR BOP BONNET PIN REPORT No: 50611

Equipment Name: Equipment ID: Location: Specification: Parts Examined:

BOP Bonnet Pin P 45 BOP Area ASTM E 1444 Load Bearing Area (Excluding Thread) None Fit for Use Transocean Support Services Sedco 702

Defect Found: Recommendation: Name of Client: Place of Inspection:

Inspectors Name/Qualification
CHINEDU OGBONNA
SNT Level II MT, PT, UT Lifting Equipment Insp.

Signature/Date

11 / 2011

VISUAL EXAMINATION AND MAGNETIC PARTICLE INSPECTION REPORT FOR BOP BONNET PIN REPORT No: 50612

Equipment Name: Equipment ID: Location: Specification: Parts Examined:

BOP Bonnet Pin P 46 BOP Area ASTM E 1444 Load Bearing Area (Excluding Thread) None Fit for Use Transocean Support Services Sedco 702

Defect Found: Recommendation: Name of Client: Place of Inspection:

Inspectors Name/Qualification
CHINEDU OGBONNA
SNT Level II MT, PT, UT Lifting Equipment Insp.

Signature/Date

11 / 2011

VISUAL EXAMINATION AND MAGNETIC PARTICLE INSPECTION REPORT FOR BOP BONNET PIN REPORT No: 50613

Equipment Name: Equipment ID: Location: Specification: Parts Examined:

BOP Bonnet Pin P 44 BOP Area ASTM E 1444 Load Bearing Area (Excluding Thread) None Fit for Use Transocean Support Services Sedco 702

Defect Found: Recommendation: Name of Client: Place of Inspection:

Inspectors Name/Qualification
CHINEDU OGBONNA
SNT Level II MT, PT, UT Lifting Equipment Insp.

Signature/Date

11 / 2011

VISUAL EXAMINATION AND MAGNETIC PARTICLE INSPECTION REPORT FOR BOP BONNET PIN REPORT No: 50614

Equipment Name: Equipment ID: Location: Specification: Parts Examined:

BOP Bonnet Pin P 43 BOP Area ASTM E 1444 Load Bearing Area (Excluding Thread) None Fit for Use Transocean Support Services Sedco 702

Defect Found: Recommendation: Name of Client: Place of Inspection:

Inspectors Name/Qualification
CHINEDU OGBONNA
SNT Level II MT, PT, UT Lifting Equipment Insp.

Signature/Date

11 / 2011

VISUAL EXAMINATION AND MAGNETIC PARTICLE INSPECTION REPORT FOR BOP BONNET PIN REPORT No: 50615

Equipment Name: Equipment ID: Location: Specification: Parts Examined:

BOP Bonnet Pin P 33 BOP Area ASTM E 1444 Load Bearing Area (Excluding Thread) None Fit for Use Transocean Support Services Sedco 702

Defect Found: Recommendation: Name of Client: Place of Inspection:

Inspectors Name/Qualification
CHINEDU OGBONNA
SNT Level II MT, PT, UT Lifting Equipment Insp.

Signature/Date

11 / 2011

VISUAL EXAMINATION AND MAGNETIC PARTICLE INSPECTION REPORT FOR BOP BONNET PIN REPORT No: 50616

Equipment Name: Equipment ID: Location: Specification: Parts Examined:

BOP Bonnet Pin P 28 BOP Area ASTM E 1444 Load Bearing Area (Excluding Thread) None Fit for Use Transocean Support Services Sedco 702

Defect Found: Recommendation: Name of Client: Place of Inspection:

Inspectors Name/Qualification
CHINEDU OGBONNA
SNT Level II MT, PT, UT Lifting Equipment Insp.

Signature/Date

11 / 2011

VISUAL EXAMINATION AND MAGNETIC PARTICLE INSPECTION REPORT FOR LOWER SHEAR RAM BLOCK (FWD) REPORT No: 50617

Equipment Name: Equipment ID: Location: Specification: Parts Examined: Defect Found: Recommendation: Name of Client: Place of Inspection:

Lower Shear Ram Block (Fwd) 81537-03-01/207K868 Port Side BOP Area ASTM E 1444 Load Bearing Area
)

None Fit for Use Transocean Support Services Sedco 702

Inspectors Name/Qualification
CHINEDU OGBONNA
SNT Level II MT, PT, UT Lifting Equipment Insp.

Signature/Date

11 / 2011

VISUAL EXAMINATION AND MAGNETIC PARTICLE INSPECTION REPORT FOR UPPER PIPE RAM BLOCK (FWD) REPORT No:50618

Equipment Name: Equipment ID: Location: Specification: Parts Examined: Defect Found: Recommendation: Name of Client: Place of Inspection:

Upper Pipe Ram Block (Fwd) 20469/255 Port Side BOP Area ASTM E 1444 Load Bearing Area
)

None Fit for Use Transocean Support Services Sedco 702

Inspectors Name/Qualification
CHINEDU OGBONNA
SNT Level II MT, PT, UT Lifting Equipment Insp.

Signature/Date

11 / 2011

VISUAL EXAMINATION AND MAGNETIC PARTICLE INSPECTION REPORT FOR UPPER PIPE RAM BLOCK (AFT) REPORT No: 50619

Equipment Name: Equipment ID: Location: Specification: Parts Examined: Defect Found: Recommendation: Name of Client: Place of Inspection:

Upper Pipe Ram Block (Aft) 20469/B235 Port Side BOP Area ASTM E 1444 Load Bearing Area
)

None Fit for Use Transocean Support Services Sedco 702

Inspectors Name/Qualification
CHINEDU OGBONNA
SNT Level II MT, PT, UT Lifting Equipment Insp.

Signature/Date

11 / 2011

VISUAL EXAMINATION AND MAGNETIC PARTICLE INSPECTION REPORT FOR LOWER PIPE RAM (FWD) REPORT No: 50620

Equipment Name: Equipment ID: Location: Specification: Parts Examined: Defect Found: Recommendation: Name of Client: Place of Inspection:

Lower Pipe Ram (Fwd) 20469/227H505 Port Side BOP Area ASTM E 1444 Load Bearing Area
)

None Fit for Use Transocean Support Services Sedco 702

Inspectors Name/Qualification
CHINEDU OGBONNA
SNT Level II MT, PT, UT Lifting Equipment Insp.

Signature/Date

11 / 2011

VISUAL EXAMINATION AND MAGNETIC PARTICLE INSPECTION REPORT FOR LOWER PIPE RAM (AFT) REPORT No: 50621

Equipment Name: Equipment ID: Location: Specification: Parts Examined: Defect Found: Recommendation: Name of Client: Place of Inspection:

Lower Pipe Ram (Aft) 20469/242 Port Side BOP Area ASTM E 1444 Load Bearing Area
)

None Fit for Use Transocean Support Services Sedco 702

Inspectors Name/Qualification
CHINEDU OGBONNA
SNT Level II MT, PT, UT Lifting Equipment Insp.

Signature/Date

11 / 2011

VISUAL EXAMINATION AND MAGNETIC PARTICLE INSPECTION REPORT FOR LOWER SHEAR RAM (AFT) REPORT No: 50622

Equipment Name: Equipment ID: Location: Specification: Parts Examined: Defect Found: Recommendation: Name of Client: Place of Inspection:

Lower Shear Ram (Aft) 20469/263 Port Side BOP Area ASTM E 1444 Load Bearing Area
)

None Fit for Use Transocean Support Services Sedco 702

Inspectors Name/Qualification
CHINEDU OGBONNA
SNT Level II MT, PT, UT Lifting Equipment Insp.

Signature/Date

11 / 2011

VISUAL EXAMINATION AND MAGNETIC PARTICLE INSPECTION REPORT FOR IRON ROUGH NECK REPORT No: 50623

Equipment Name: Equipment ID: Location: Specification: Parts Examined: Defect Found: Recommendation: Name of Client: Place of Inspection:

Iron Rough Neck ST80M29N874 Rig Floor API RP 8B Load Bearing Area
)

None Fit for Use Transocean Support Services Sedco 702

Inspectors Name/Qualification
CHINEDU OGBONNA
SNT Level II MT, PT, UT Lifting Equipment Insp.

Signature/Date

11 / 2011

VISUAL EXAMINATION AND MAGNETIC PARTICLE INSPECTION REPORT FOR EZY TORQUE REPORT No: 50624

Equipment Name: Equipment ID: Location: Specification: Parts Examined: Defect Found: Recommendation: Name of Client: Place of Inspection:

EZY TORQUE HCHG19N237 Rig Floor API RP 8B Load Bearing Area

)

None Fit for Use Transocean Support Services Sedco 702

Inspectors Name/Qualification
CHINEDU OGBONNA
SNT Level II MT, PT, UT Lifting Equipment Insp.

Signature/Date

11 / 2011

VISUAL EXAMINATION AND MAGNETIC PARTICLE INSPECTION REPORT FOR A PAIR OF ROTARY BOWL REPORT No: 50625

Equipment Name: Equipment ID: Location: Specification: Parts Examined: Defect Found: Recommendation: Name of Client: Place of Inspection:

A Pair of Rotary Bowl 49503/A & 49503B Rig Floor API RP 8B Load Bearing Area
)

None Fit for Use Transocean Support Services Sedco 702

Inspectors Name/Qualification
CHINEDU OGBONNA
SNT Level II MT, PT, UT Lifting Equipment Insp.

Signature/Date

11 / 2011

VISUAL EXAMINATION AND MAGNETIC PARTICLE INSPECTION REPORT FOR MASTER BUSHING REPORT No: 50626

Equipment Name: Equipment ID: Location: Specification: Parts Examined: Defect Found: Recommendation: Name of Client: Place of Inspection:

Master Bushing MB 01 Rig Floor API RP 8B Load Bearing Area

)

None Fit for Use Transocean Support Services Sedco 702

Inspectors Name/Qualification
CHINEDU OGBONNA
SNT Level II MT, PT, UT Lifting Equipment Insp.

Signature/Date

11 / 2011

DEFECT / NON COMPLIANCE REPORT FOR A PAIR OF ROTARY BOWL REPORT No: 50627

Equipment Name: Equipment ID: Location: Specification: Parts Examined: Defect Found: Recommendation: Name of Client: Place of Inspection:

A Pair of Rotary Bowl 1904C & CMS 02 Rig Floor API RP 8B Load Bearing Area
)

Crack was found on the Load Bearing Areas Remove from Service Transocean Support Services Sedco 702

Inspectors Name/Qualification
CHINEDU OGBONNA
SNT Level II MT, PT, UT Lifting Equipment Insp.

Signature/Date

11 / 2011

VISUAL EXAMINATION AND MAGNETIC PARTICLE INSPECTION REPORT FOR A PAIR OF ROTARY BOWL REPORT No: 50628

Equipment Name: Equipment ID: Location: Specification: Parts Examined: Defect Found: Recommendation: Name of Client: Place of Inspection:

A Pair of Rotary Bowl 020 Rig Floor API RP 8B Load Bearing Area
)

None Fit for Use Transocean Support Services Sedco 702

Inspectors Name/Qualification
CHINEDU OGBONNA
SNT Level II MT, PT, UT Lifting Equipment Insp.

Signature/Date

11 / 2011

VISUAL EXAMINATION AND MAGNETIC PARTICLE INSPECTION REPORT FOR 5.1/2 DRILL PIPE SLIP REPORT No: 50629

Equipment Name: Equipment ID: Location: Specification: Parts Examined: Defect Found: Recommendation: Name of Client: Place of Inspection:

5.1/2 Drill Pipe Slip SN 223 Rig Floor API RP 8B Load Bearing Area
)

None Fit for Use Transocean Support Services Sedco 702

Inspectors Name/Qualification
CHINEDU OGBONNA
SNT Level II MT, PT, UT Lifting Equipment Insp.

Signature/Date

11 / 2011

VISUAL EXAMINATION AND MAGNETIC PARTICLE INSPECTION REPORT FOR CLAMP REPORT No: 50630

Equipment Name: Equipment ID: Location: Specification: Parts Examined: Defect Found: Recommendation: Name of Client: Place of Inspection:

Clamp SN 28303 Pipe Deck ASME VI 4 Lifting Points

)

None Fit for Use Transocean Support Services Sedco 702

Inspectors Name/Qualification
CHINEDU OGBONNA
SNT Level II MT, PT, UT Lifting Equipment Insp.

Signature/Date

11 / 2011

VISUAL EXAMINATION AND MAGNETIC PARTICLE INSPECTION REPORT FOR 5.1/2 DRILL PIPE SLIP REPORT No: 50631

Equipment Name: Equipment ID: Location: Specification: Parts Examined: Defect Found: Recommendation: Name of Client: Place of Inspection:

5.1/2 Drill Pipe Slip 10547 Rig Floor API RP 8B Load Bearing Area
)

None Fit for Use Transocean Support Services Sedco 702

Inspectors Name/Qualification
CHINEDU OGBONNA
SNT Level II MT, PT, UT Lifting Equipment Insp.

Signature/Date

11 / 2011

VISUAL EXAMINATION AND MAGNETIC PARTICLE INSPECTION REPORT FOR C-PLATE REPORT No: 50632

Equipment Name: Equipment ID: Location: Specification: Parts Examined: Defect Found: Recommendation: Name of Client: Place of Inspection:

C - Plate 19276U Pipe Deck ASME VI 4 Lifting Points

)

None Fit for Use Transocean Support Services Sedco 702

Inspectors Name/Qualification
CHINEDU OGBONNA
SNT Level II MT, PT, UT Lifting Equipment Insp.

Signature/Date

11 / 2011

VISUAL EXAMINATION AND MAGNETIC PARTICLE INSPECTION REPORT FOR C-PLATE REPORT No: 50633

Equipment Name: Equipment ID: Location: Specification: Parts Examined: Defect Found: Recommendation: Name of Client: Place of Inspection:

C - Plate TN 004 CP Pipe Deck ASME VI 3 Lifting Points

)

None Fit for Use Transocean Support Services Sedco 702

Inspectors Name/Qualification
CHINEDU OGBONNA
SNT Level II MT, PT, UT Lifting Equipment Insp.

Signature/Date

11 / 2011

VISUAL EXAMINATION AND MAGNETIC PARTICLE INSPECTION REPORT FOR 9.5/8 ELEVATOR INSERT REPORT No: 50634

Equipment Name: Equipment ID: Location: Specification: Parts Examined: Defect Found: Recommendation: Name of Client: Place of Inspection:

9.5/8 Elevator Insert H 228D06 Rig Floor API RP 8B Load Bearing Areas
)

None Fit for Use Transocean Support Services Sedco 702

Inspectors Name/Qualification
CHINEDU OGBONNA
SNT Level II MT, PT, UT Lifting Equipment Insp.

Signature/Date

11 / 2011

VISUAL EXAMINATION AND MAGNETIC PARTICLE INSPECTION REPORT FOR 8.1/4 DRILL COLLAR SLIP (11 SEGMENTS) REPORT No: 50635

Equipment Name: Equipment ID: Location: Specification: Parts Examined: Defect Found: Recommendation: Name of Client: Place of Inspection:

8.1/4 Drill Collar Slip (11 Segments) DCS 03 Rig Floor API RP 8B Load Bearing Area None Fit for Use Transocean Support Services Sedco 702

Inspectors Name/Qualification
CHINEDU OGBONNA
SNT Level II MT, PT, UT Lifting Equipment Insp.

Signature/Date

11 / 2011

VISUAL EXAMINATION AND MAGNETIC PARTICLE INSPECTION REPORT FOR CLAMP REPORT No: 50636

Equipment Name: Equipment ID: Specification: Parts Examined: Defect Found: Recommendation: Name of Client: Place of Inspection:

Number 6 Clamp 6/1 BS MA 31 MPI on Critical Areas

)

None Fit for Use Transocean Support Services Sedco 702

Inspectors Name/Qualification
CHINEDU OGBONNA
SNT Level II MT, PT, UT Lifting Equipment Insp.

Signature/Date

12 / 2011

VISUAL EXAMINATION AND MAGNETIC PARTICLE INSPECTION REPORT FOR CLAMP REPORT No: 50637

Equipment Name: Equipment ID: Specification: Parts Examined: Defect Found: Recommendation: Name of Client: Place of Inspection:

Number 6 Clamp 6/2 BS MA 31 MPI on Critical Areas

)

None Fit for Use Transocean Support Services Sedco 702

Inspectors Name/Qualification
CHINEDU OGBONNA
SNT Level II MT, PT, UT Lifting Equipment Insp.

Signature/Date

12 / 2011

VISUAL EXAMINATION AND DYE PENETRANT INSPECTION REPORT FOR FWD LOWER SHEAR RAM BUTTON REPORT No: 50638

Equipment Name: Equipment ID: Location: Specification: Parts Examined: Defect Found: Recommendation: Name of Client: Place of Inspection:

FWD Lower Shear Ram Button 112062417.01 Left BOP BS EN 571-1:1997 MPI on Critical Areas
)

None Fit for Use Transocean Support Services Sedco 702

Inspectors Name/Qualification
CHINEDU OGBONNA
SNT Level II MT, PT, UT Lifting Equipment Insp.

Signature/Date

12 / 2011

VISUAL EXAMINATION AND MAGNETIC PARTICLE INSPECTION REPORT FOR HINGE JAW REPORT No: 50639

Equipment Name: Equipment ID: Location: Specification: Parts Examined: Defect Found: Recommendation: Name of Client: Place of Inspection:

Hinge Jaw HJ-1A Rig Floor API RP 8B Load Bearing Areas

)

None Fit for Use Transocean Support Services Sedco 702

Inspectors Name/Qualification
CHINEDU OGBONNA
SNT Level II MT, PT, UT Lifting Equipment Insp.

Signature/Date

12 / 2011

VISUAL EXAMINATION AND MAGNETIC PARTICLE INSPECTION REPORT FOR HINGE JAW REPORT No: 50640

Equipment Name: Equipment ID: Location: Specification: Parts Examined: Defect Found: Recommendation: Name of Client: Place of Inspection:

Hinge Jaw HJ-2A Rig Floor API RP 8B Load Bearing Areas

)

None Fit for Use Transocean Support Services Sedco 702

Inspectors Name/Qualification
CHINEDU OGBONNA
SNT Level II MT, PT, UT Lifting Equipment Insp.

Signature/Date

12 / 2011

VISUAL EXAMINATION AND MAGNETIC PARTICLE INSPECTION REPORT FOR LUG JAW REPORT No: 50641

Equipment Name: Equipment ID: Location: Specification: Parts Examined: Defect Found: Recommendation: Name of Client: Place of Inspection:

Lug Jaw T 2362 Rig Floor API RP 8B Load Bearing Areas

)

None Fit for Use Transocean Support Services Sedco 702

Inspectors Name/Qualification
CHINEDU OGBONNA
SNT Level II MT, PT, UT Lifting Equipment Insp.

Signature/Date

12 / 2011

VISUAL EXAMINATION AND MAGNETIC PARTICLE INSPECTION REPORT FOR LUG JAW REPORT No: 50642

Equipment Name: Equipment ID: Location: Specification: Parts Examined: Defect Found: Recommendation: Name of Client: Place of Inspection:

Lug Jaw 5318 Rig Floor API RP 8B Load Bearing Areas

)

None Fit for Use Transocean Support Services Sedco 702

Inspectors Name/Qualification
CHINEDU OGBONNA
SNT Level II MT, PT, UT Lifting Equipment Insp.

Signature/Date

12 / 2011

VISUAL EXAMINATION AND MAGNETIC PARTICLE INSPECTION REPORT FOR 4 8.1/2 HT 100 MANUAL TONG REPORT No: 50643 Equipment Name: Equipment ID: Location: Specification: Components Inspected: 4 8.1/2 HT 100 Manual Tong 0765-BB Rig Floor API RP 8B Load Bearing Areas of Latch, Handle, Lever, Long Jaw, Short Jaw, Hinge Jaw
)

Maker: Defect Found: Recommendation: Name of Client: Place of Inspection:

Varco BJ None Fit for Use Transocean Support Services Sedco 702

Inspectors Name/Qualification
CHINEDU OGBONNA
SNT Level II MT, PT, UT Lifting Equipment Insp.

Signature/Date

12 / 2011

VISUAL EXAMINATION AND MAGNETIC PARTICLE INSPECTION REPORT FOR 4 8.1/2 HT 100 MANUAL TONG REPORT No: 50644 Equipment Name: Equipment ID: Location: Specification: Components Inspected: 4 8.1/2 HT 100 Manual Tong TC 141652 Rig Floor API RP 8B Load Bearing Areas of Latch, Handle, Lever, Long Jaw, Short Jaw, Hinge Jaw
)

Maker: Defect Found: Recommendation: Name of Client: Place of Inspection:

Varco BJ None Fit for Use Transocean Support Services Sedco 702

Inspectors Name/Qualification
CHINEDU OGBONNA
SNT Level II MT, PT, UT Lifting Equipment Insp.

Signature/Date

12 / 2011

VISUAL EXAMINATION AND DYE PENETRANT INSPECTION REPORT FOR FWD AFT LOWER SHEAR RAM BUTTON REPORT No: 50645

Equipment Name: Equipment ID: Location: Specification: Parts Examined: Defect Found: Recommendation: Name of Client: Place of Inspection:

Aft Lower Shear Ram Button 112062419.01 Right BOP BS EN 571-1:1997 MPI on Critical Areas
)

None Fit for Use Transocean Support Services Sedco 702

Inspectors Name/Qualification
CHINEDU OGBONNA
SNT Level II MT, PT, UT Lifting Equipment Insp.

Signature/Date

12 / 2011

Inspection of travelling bloc 500 t
No ratings yet
Inspection of travelling bloc 500 t
1 page
RD050 Business Requirements Scenarios
No ratings yet
RD050 Business Requirements Scenarios
7 pages
Feasibility Study of Biomass Power Plant
100% (2)
Feasibility Study of Biomass Power Plant
40 pages
CDS 9.625 53.50lb P110 VAM+TOP+® Alt+Drift+8.500 87.5
No ratings yet
CDS 9.625 53.50lb P110 VAM+TOP+® Alt+Drift+8.500 87.5
1 page
International Limited: Certificate of Visual Examination and Mpi
No ratings yet
International Limited: Certificate of Visual Examination and Mpi
2 pages
Inspection Report SPK 136 Rev.1
No ratings yet
Inspection Report SPK 136 Rev.1
7 pages
MPI Report 005 Monkeyboard 001
No ratings yet
MPI Report 005 Monkeyboard 001
1 page
Load Collar Model: Grease Lubrication Schedule
No ratings yet
Load Collar Model: Grease Lubrication Schedule
2 pages
International Limited: Certificate of Visual Examination and Mpi
No ratings yet
International Limited: Certificate of Visual Examination and Mpi
1 page
OSI Connector 2012
No ratings yet
OSI Connector 2012
11 pages
Wheel Loader Operator Assessment
No ratings yet
Wheel Loader Operator Assessment
29 pages
OIS-E&HS - OCTG Inspected Tubular Loading Process Flow DRAFT
No ratings yet
OIS-E&HS - OCTG Inspected Tubular Loading Process Flow DRAFT
4 pages
SPN Thixotropic System
No ratings yet
SPN Thixotropic System
2 pages
Iv-0751-20 Boot Basket Ae63922a
No ratings yet
Iv-0751-20 Boot Basket Ae63922a
1 page
International Limited International Limited: JC JC
No ratings yet
International Limited International Limited: JC JC
1 page
MPI Report 004 Mast Axis 002
No ratings yet
MPI Report 004 Mast Axis 002
1 page
Preparation For Running Casing
No ratings yet
Preparation For Running Casing
3 pages
VTI-Seal Lock HC-003
No ratings yet
VTI-Seal Lock HC-003
3 pages
Visual Body, Visual Connections, Black Light Connections: International Limited
No ratings yet
Visual Body, Visual Connections, Black Light Connections: International Limited
6 pages
Certificate of Visual Examination and Mpi: International Limited
No ratings yet
Certificate of Visual Examination and Mpi: International Limited
27 pages
9-1/2in CDR : Fishing Diagram and Mechanical Specifications
No ratings yet
9-1/2in CDR : Fishing Diagram and Mechanical Specifications
10 pages
Dropped Object Survey
No ratings yet
Dropped Object Survey
31 pages
API Spec 16C - Union Connections 20140103
No ratings yet
API Spec 16C - Union Connections 20140103
2 pages
Thread Compound
No ratings yet
Thread Compound
5 pages
Sub-Spec 027 - DP Master DS, MT and High Torque PAC: Visual Inspection
No ratings yet
Sub-Spec 027 - DP Master DS, MT and High Torque PAC: Visual Inspection
3 pages
Bear - Public - JFEBEAR-TP-M-101 Rev3 Field Inspection of JFEBEAR
100% (2)
Bear - Public - JFEBEAR-TP-M-101 Rev3 Field Inspection of JFEBEAR
5 pages
Fox Public Fox-Tp-M-101 Field Inspection
No ratings yet
Fox Public Fox-Tp-M-101 Field Inspection
5 pages
Null
No ratings yet
Null
4 pages
API SPEC 5CT 10TH 2018 Table C4
No ratings yet
API SPEC 5CT 10TH 2018 Table C4
1 page
BHNK Drill Pipe Catalog
No ratings yet
BHNK Drill Pipe Catalog
12 pages
Rotating System: Submitted To:-Er. Akash Rana (Hod) Petroleum
No ratings yet
Rotating System: Submitted To:-Er. Akash Rana (Hod) Petroleum
18 pages
Null
No ratings yet
Null
67 pages
Irata, NDT, Inspection Engineer
No ratings yet
Irata, NDT, Inspection Engineer
5 pages
Visual SL APEX
100% (1)
Visual SL APEX
3 pages
Halifax Inspection Services: Used Motor Inspection Report
No ratings yet
Halifax Inspection Services: Used Motor Inspection Report
2 pages
Mud Pump-02 MPI Report
No ratings yet
Mud Pump-02 MPI Report
9 pages
Drill Pipe I.R
0% (1)
Drill Pipe I.R
6 pages
WFT SOW - For Wellbore Clean Up Tools (WBCU) - Sept 30th.
No ratings yet
WFT SOW - For Wellbore Clean Up Tools (WBCU) - Sept 30th.
1 page
Bit Subs PQP
No ratings yet
Bit Subs PQP
3 pages
Drill Stem Test (DST) Tools: General Requirements
No ratings yet
Drill Stem Test (DST) Tools: General Requirements
4 pages
NC38 Box
No ratings yet
NC38 Box
1 page
NS-1-141. Internal Coating and Inspection Specifications For Drill Pipe
No ratings yet
NS-1-141. Internal Coating and Inspection Specifications For Drill Pipe
2 pages
Sino Tharwa ST7 Report
No ratings yet
Sino Tharwa ST7 Report
9 pages
4068 Jack Up Leg Straightness and Alignment 2
No ratings yet
4068 Jack Up Leg Straightness and Alignment 2
4 pages
Especificacion de Normas de Inspeccion
No ratings yet
Especificacion de Normas de Inspeccion
32 pages
Drilling Tubulars Data
No ratings yet
Drilling Tubulars Data
2 pages
PROFIL - SRG Measurement - Rev 1
100% (1)
PROFIL - SRG Measurement - Rev 1
1 page
Coupling Make-Up Procedure Mu-Cplg-000
No ratings yet
Coupling Make-Up Procedure Mu-Cplg-000
7 pages
Iv-0204-21 Fishing Magnet 54313ha
No ratings yet
Iv-0204-21 Fishing Magnet 54313ha
1 page
Mongoose Pro Mud Cleaner 2-12 - 6T4
No ratings yet
Mongoose Pro Mud Cleaner 2-12 - 6T4
1 page
New Microsoft Office Excel Worksheet
No ratings yet
New Microsoft Office Excel Worksheet
4 pages
Onshore Make-Up of BHA Assemblies: Performance Criteria
No ratings yet
Onshore Make-Up of BHA Assemblies: Performance Criteria
2 pages
KHT5500 Power Tong Manual
No ratings yet
KHT5500 Power Tong Manual
46 pages
TechScope EZT-II
No ratings yet
TechScope EZT-II
2 pages
API Spec 8c-Equipment List
No ratings yet
API Spec 8c-Equipment List
2 pages
Octg
No ratings yet
Octg
39 pages
Sucker Rod Specifications
No ratings yet
Sucker Rod Specifications
2 pages
ETI-CPW Packer Manual Spare Part
No ratings yet
ETI-CPW Packer Manual Spare Part
4 pages
Itp Rig Acs #23
No ratings yet
Itp Rig Acs #23
5 pages
9 - 58in T95 VamTop Connection Datasheet
100% (1)
9 - 58in T95 VamTop Connection Datasheet
1 page
International Limited: BOP Crane Hook With Pin
No ratings yet
International Limited: BOP Crane Hook With Pin
4 pages
International Limited: Magnetic Particle Inspection Report
No ratings yet
International Limited: Magnetic Particle Inspection Report
2 pages
Certificate of Visual Examination: International Limited
No ratings yet
Certificate of Visual Examination: International Limited
33 pages
International Limited: Certificate of Visual Examination and Mpi
No ratings yet
International Limited: Certificate of Visual Examination and Mpi
18 pages
International Limited: Report For Visual Examination and Dye Penetrant Inspection
No ratings yet
International Limited: Report For Visual Examination and Dye Penetrant Inspection
1 page
Null
No ratings yet
Null
10 pages
International Limited: Certificate of Visual Examination and Mpi
No ratings yet
International Limited: Certificate of Visual Examination and Mpi
1 page
Null
No ratings yet
Null
23 pages
International Limited: Certificate of Visual Examination
100% (1)
International Limited: Certificate of Visual Examination
2 pages
Null
No ratings yet
Null
13 pages
International Limited: Certificate of Visual Examination and Et
No ratings yet
International Limited: Certificate of Visual Examination and Et
1 page
International Limited: Certificate of Visual Examination
No ratings yet
International Limited: Certificate of Visual Examination
2 pages
International Limited
No ratings yet
International Limited
22 pages
Null
No ratings yet
Null
1 page
International Limited: Certificate of Visual Examination and Mpi
No ratings yet
International Limited: Certificate of Visual Examination and Mpi
2 pages
International Limited: Certificate of Visual Examination and Mpi
No ratings yet
International Limited: Certificate of Visual Examination and Mpi
1 page
Defect / Non Compliance Report: International Limited
No ratings yet
Defect / Non Compliance Report: International Limited
96 pages
International Limited: 0.61mtr X 1.41mtrs (Length X Width X Height) C/W 4 Lifting Points
No ratings yet
International Limited: 0.61mtr X 1.41mtrs (Length X Width X Height) C/W 4 Lifting Points
1 page
Certificate of Visual Examination: International Limited
No ratings yet
Certificate of Visual Examination: International Limited
3 pages
International Limited: Certificate of Visual Examination
No ratings yet
International Limited: Certificate of Visual Examination
1 page
Defect / Non Compliance Report: International Limited
No ratings yet
Defect / Non Compliance Report: International Limited
60 pages
Defect / Non Compliance Report: International Limited
No ratings yet
Defect / Non Compliance Report: International Limited
20 pages
Certificate of Visual Examination and Dpi: Description of Equipment Billy Pugh X-904-4 Personnel Transfer Device
No ratings yet
Certificate of Visual Examination and Dpi: Description of Equipment Billy Pugh X-904-4 Personnel Transfer Device
3 pages
International Limited: Certificate of Visual Examination and Mpi
No ratings yet
International Limited: Certificate of Visual Examination and Mpi
8 pages
International Limited: Certificate of Visual Examination
No ratings yet
International Limited: Certificate of Visual Examination
2 pages
Report For Visual Examination and Magnetic Particle Inspection
No ratings yet
Report For Visual Examination and Magnetic Particle Inspection
21 pages
International Limited: Report For Visual Examination and Magnetic Particle Inspection
No ratings yet
International Limited: Report For Visual Examination and Magnetic Particle Inspection
1 page
International Limited: Certificate of Visual Examination
No ratings yet
International Limited: Certificate of Visual Examination
70 pages
Certificate of Visual Examination: International Limited
No ratings yet
Certificate of Visual Examination: International Limited
2 pages
Contact PEO To Check: Is This Person Really A Professional Engineer?
No ratings yet
Contact PEO To Check: Is This Person Really A Professional Engineer?
2 pages
Taiyo Job Positions.
No ratings yet
Taiyo Job Positions.
3 pages
Securus-GTL Signing Bonuses
No ratings yet
Securus-GTL Signing Bonuses
25 pages
General Classification of Metal Processes
No ratings yet
General Classification of Metal Processes
3 pages
Catrax Fit - Basic Manual
No ratings yet
Catrax Fit - Basic Manual
15 pages
Phone No. 051-9205075 Ext. 385, 377,236,243,241 & 298
No ratings yet
Phone No. 051-9205075 Ext. 385, 377,236,243,241 & 298
7 pages
PEM M C02: Operations Management: Post Graduate Programme in Project Engineering and Management
No ratings yet
PEM M C02: Operations Management: Post Graduate Programme in Project Engineering and Management
63 pages
Implementation of Construction Safety and Health Program
No ratings yet
Implementation of Construction Safety and Health Program
18 pages
Final Report Tata Motors-1
100% (1)
Final Report Tata Motors-1
51 pages
Fatigue Failure Analysis of Hollow Cylindrical Roller Bearing
No ratings yet
Fatigue Failure Analysis of Hollow Cylindrical Roller Bearing
5 pages
Swaraj Mazda Limited A Project Report On Working Capital Management
100% (3)
Swaraj Mazda Limited A Project Report On Working Capital Management
84 pages
ICAT Report Cover Template-New
No ratings yet
ICAT Report Cover Template-New
6 pages
Aksialni 20092
No ratings yet
Aksialni 20092
4 pages
Work Breakdown Structure
50% (2)
Work Breakdown Structure
3 pages
Specification
No ratings yet
Specification
2 pages
Manual
100% (1)
Manual
9 pages
Engineer-Officer
No ratings yet
Engineer-Officer
3 pages
City of Chicago Manufacturing District Building and Use Code
No ratings yet
City of Chicago Manufacturing District Building and Use Code
16 pages
Contoh Pengisian Enrollment Form
No ratings yet
Contoh Pengisian Enrollment Form
3 pages
Aircraft Runway Length
100% (1)
Aircraft Runway Length
43 pages
BD 330 en Eu 050527
No ratings yet
BD 330 en Eu 050527
2 pages
Inovance Technology Company Overview Monarch Elevators - Jan14
No ratings yet
Inovance Technology Company Overview Monarch Elevators - Jan14
20 pages
Application of Learning Curves in The Aerospace Industry Handout
No ratings yet
Application of Learning Curves in The Aerospace Industry Handout
34 pages
Casting Processes-Quiz-Description
No ratings yet
Casting Processes-Quiz-Description
8 pages
Diaphragm Compressors
100% (1)
Diaphragm Compressors
4 pages
IBM Infoprint 6700 - Parts
No ratings yet
IBM Infoprint 6700 - Parts
14 pages
Decentralised SPVPP
No ratings yet
Decentralised SPVPP
5 pages
Berco BROCHURE PDF
100% (2)
Berco BROCHURE PDF
3 pages