USER’SGUIDE

INTRODUCTION

BASIC OPERATION

AV Integrated Memory Navigation

BASIC NAVIGATION OPERATION

AVIC-MRZ099W SEARCH

ROUTE

AV Integrated Memory Navigation REGISTRATION \ EDITING

AVIC-MRZ099 SETTINGS

ADJUSTMENT AND CORRECTION

INFORMATION
AV Integrated Memory Navigation

AVIC-MRZ077 BASIC AUDIO OPERATION

BROADCAST RECEPTION

MUSIC DISC
AV Integrated Memory Navigation

AVIC-MRZ066
VIDEO DISC

MEMORY MEDIA

USE IPOD

USE BLUETOOTH AUDIO

USE AUX

SOUND QUALITY SETTINGS / ADJUSTMENT

OTHER FEATURES

OTHER EQUIPMENT

COMMUNICATION

USE NAVI STUDIO

WHEN IN TROUBLE

APPENDIX
table of contents

End character input .................................. 29

Introduction
Entering the URL ..................... 29
How to read this book .................................. 14 Symbols that can be converted to kana-kanji ..................... 29
Academic symbol ................................................ .......... 29
How to write this book .................................. 14
Greek letters ................................................ ..29
brackets................................................. ................ 30
basic operation Symbols / marks ..................................................... ... 30
unit................................................. ................ 30
Basic operation ..................................... 15 point................................................. .................... 30
Operate with touch panel ..................... 15 Arrow ................................................................ ................ 30
others................................................. ............ 30
Operate with buttons ................................................ 15
Operate with air gestures ............... 15
Air gesture points ..................... 15 Navigation basic operation
Outing launcher and check wind
C, air gesture hand gesture function setting Operation of map screen ..................... 31
How to display the constant switching key ............... 15
Display the current location screen ........................ 31
How to operate the hand gesture .................................. 16
Information displayed at the bottom of the screen ........................... 31
Set air gestures ............... 16 How to see the current location screen .................................. 33
Set ON / OFF .................................. 16 Set the map ..................... 33
Set the sensitivity ........................................................ 17 17
Set map color switching ..................... 33
Set the gesture ..................................... 17 Set the travel track display ..................... 33
Set the check window ..................... 17
Move the map ....................................... 34
Set the display time .................................. 18
About Active Info .................. 34
Set the gesture sound ........................ 18
How to read the scroll screen ..................... 36
How to switch screens .................................. 18
Set the view mode when scrolling ..... 36
Set an interrupt to the AV screen .................. 19
Change the scale of the map ..................... 36
Temporarily turn off the screen (Navi Stambha)
Change the map display method ..................... 37
stomach)................................................ ......... 19
Set the map display method ..................... 37
Operation of list screen ................................................ 19
Twin view Set left screen angle ..... 37
Basic list operations ..................... 19 Set the highway side map ............ 38
Japanese syllabary tab operation ................................................................ 20
Highway mode side map angle
Checklist operation ..................... 20 ..................................................... ..38
Operation of list with indicator ................ 20
Driver's View Side Map Ang
Pop-up menu operation ........................ 20 Set the rules ..................................................... 38
Manipulating the side map list ..................... 20
Set the AV side view angle ..... 39
Sorting operation ........................................................ twenty one
Set the city map ..................... 39
Menu operation ......................... 22 Set up a sky city map ..................... 39
Set the city map boundary display ..... 40
Central menu operation ............ 22 Set auto angle change ............ 40
NAVI. Menu ............................................... twenty two
Set the target map ..................... 40
AV. Menu ..................................................... ....twenty two
Change the orientation of the map .................................. 41
View menu ....................................................... 23
Information menu ................................................ ..twenty three One-way mark on 100 m scale
Setting / editing menu .................................. 24 ...................................................... 41
Mobile phone menu .................................................. 24 Select the logo mark and display it on the map ... 42
Route menu ........................................ 24 Set the logo mark display scale ............ 42
Shortcut menu operation ............... 24 Register the map scale ..................... 43
About the side map ........................ 43
Character input operation ..................... 26
Highway mode ..................................... 43
Switching the input palette ..................... 26 List screen ................................................ ...... 43
Flow of character input operation ........................ 26 Candidate display screen ..................................................... ... 43
Switching the character type ............... 26 Information screen ................................................ .......... 44
Enter characters .................................................. 27 27
Perform predictive conversion and Chinese character conversion ........................ 28
Map screen while driving ...................................... 45
Five
 Voice guidance while driving ................................................ 45 About the function during route guidance ..................... 68
Set toll road caution points / prefectural border information ........ 45 Automatically route when you deviate from the route
Set railroad crossing guidance .................................. 45 Re-search for ........................................................ 68 68
Set lane guidance for turning left and right ................ 46 Guidance on the direction of travel ........................................................ 69

Set refresh guidance ........................ 46 When approaching the entrance of the urban expressway ..................... 69

Set the light lighting guidance ........................... 46 When approaching the fork of the toll road ..................... 69

When you enter the parking lot ..................................... 47 About ETC lane guidance display ....................... 69
When approaching the intersection ................................... 47 Set the ETC lane guidance display ..................... 70
Set the direction guidance display ..................... 47 When you pass the exit of the toll road or the tollhouse ......... 70

When driving on a toll road .................................. 47 Cancellation of route guidance ..................... 71

Set auto highway mode ............ 47
Erase the route and stop the guidance .... 71
Bottleneck railroad crossing display ........................ 48
Set the bottleneck railroad crossing mark display ..... 48 Setting route search conditions ..................... 72
Information window settings ........................ 48 Set the criteria for route search ..................... 72
About eco-status ..................... 49
Set how to consider toll roads ..................... 72
Highway mode ...................................... 50
Set how to consider the ferry route ....... 72
How to see the current location screen in highway mode ..... 50
Set how to consider the learned route ... 73
Display exit information .................................. 51
Set the method of considering traffic congestion ..................... 73
See the previous facility information .................................. 51
To see the information on the branch destination of the branch facility ......... 51 Set the consideration method of time regulation ............ 74

Table in service area and parking area Set the consideration method for smart ICs .......... 74
Information shown ........................................ 52
Settings at the time of route guidance ..................... 75
Display an illustration of the facility ..................... 52
About VICS information display .................. 52 Set the estimated arrival time display ........... 75
Calculated estimated arrival time Vehicle speed (general road)

Set ..................................... 75
search
Calculate the estimated arrival time Vehicle speed (paid road)

Find a place ................................... 54 Set ..................................... 75

About the eco index ................................................ 76
Search on the map ..................................................... ..54
When approaching the information center ........................... 76
Search by name ..................................................... ..54
When narrowing down by genre or area ......... 55 Set the display view when guiding at an intersection ... 76

Search by address ..................................................... ..55 Set auto free zoom ............... 77

Search by phone number ..................... 55 Set eco-driving evaluation guide ..... 77
Search by genre ..................................... 56 Set the price guide .................. 78
Searchable genres .................................. 56 Set traffic light just guidance ............... 78
Find nearby facilities ..................... 58 Set a general road simple guide ........... 78
The logo mark displayed by the peripheral search Set Auto Silent Guide ....... 79
erase................................................. ............ 59 Set the silent guide angle ... 79
Search history / Search from registered location ..................... 59 Set up a route advisor ............... 80
Search from the destinations you often go to ..................... 60 Route advisor automatic decision route

See detailed information ..................... 61 ...................................................... 80

Set request guidance ............ 81
Display detailed information .................................. 61
Auto parking memory (parking lot
Map clip (2D barcode) ... 62 History) ...................................... 81
Convert to map clip ............ 62 Auto parking memo considering turning left and right

About Lee ..................... 81

root
Look at the facilities that you have entered only by turning left

If you make it a target ..................................... 82

Entered with only a right turn or both a right and left turn
Route search and guidance ............... 64 In the case of facilities that may be ........................................ 82

How to get started with route guidance ..................... 64 Set auto parking memory ... 82
How to read the guidance start screen ..................... 65
Current location screen during route guidance ...................... 66
Route information ...................................... 83
How to read the information screen on the general road ........................ 67 Use route scrolling ..................... 83
How to read the information screen of the toll road ........................... 68 Use route profile ..................... 83
About Silent Guide ...................... 68 Use the demo run ..................................... 84
6
 End the demo run .................................. 84 Set the direction specification to the registered location .... 107
Use a route map ..................... 84 Edit the registered location group .... 108
6 Use a route map ..................... 85 Edit the group name of the registered location. 108
6 Use the route list ..................... 85 Correct the location of the registered location ............ 109
Delete the registered places individually ............ 110
Route editing ................................................ 87
Delete all registered locations ........ 110
Set different search conditions for the route being guided
Write the location information to the SD card ......... 111
Determine ..................................... .... 87
Read the location information from the SD card ... 111
Search for a route different from the route being guided

Search ..................................... .... 87 Auto parking memory (parking

Add a stop to the route ............ 88 Editing of place history) ..................... 113
Rearrange the order of stops ..................... 88 Specify the entrance ................................... 113
Delete the stop-off place ..................... 89 Erase parking lot data .................................. 113
Confirm information on destinations, stops, and departure points

Acknowledge ................................................ .... 89 Other data editing ..................... 115

Set the staying time at the stop-off point ..... 90 Clear auto-reroute history ............ 115
Specify the place of departure ................................................ 90 Clear search history ..................... 115
Specify the date and time ..................................... 91 Erase the learning content of the route ..... 116
Specify the boarding / alighting IC (interchange) Erase the running track ..................... 116
................................................................ ........... 92 Set automatic track deletion ..................... 116
Erase the number of visits in the rankings you go to often
Cancel the boarding / alighting IC designation ..................... 93

Cancel stopover ..................... 93 Leave ................................................ .117

Erase Orbis data ..................... 117
Drive plan ......................................... 94
About creating a drive plan ............... 94
Conditions for registering as a drive plan ........ 94
Setting
Read the drive plan from the SD card My setup ..................... 118
Include ..................................... ....... 94
Do my setup ....................... 118
Execute the drive plan ...................... 94
Start My Setup ..... 118
At the designated time for the drive plan ... 95
Volume adjustment ............................................ .... 118
Check the drive plan ..................... 95
Practicing air gestures ........................ 119
Edit the drive plan ............ 96 Air gesture settings .................................. 119
Erase drive plan ............ 97 Home settings ..................................................... .... 119
Use the base plan ..................... 97 Fuel economy estimation / vehicle information setting ..................... 119
Read the base plan from the SD card ... 97 ETC mounting status setting ..................... 121
Create a drive plan from the base plan Bluetooth connection settings ..................... 121
do................................................. ............ 98 Probe information transmission settings ..................... 121
Erase the loaded base plan ............ 98 Smart Loop Trial Registration ..................... 122
Exit My Setup ..................... 122

Registration / editing Fuel economy / vehicle settings .................................. 123

Set fuel consumption using fuel consumption estimation function. 123

Registration of location (point) ............... 100
Set fuel consumption without using the fuel consumption estimation function

Register your home ..................... 100 do................................................. .... 125

Register a location ..................... 100 Set other vehicle information ..................... 126
Editing the registered location .................................. 102 Set the steering remote control ........ 127
Change the name of the registered place ............ 102 Communication connection settings ..................... 128
Edit the Yomi of the registered place ............ 102
Prepare communication equipment ..................... 128
Set the phone number of the registered location .... 103 When using a Bluetooth device ... 128
Set the 2D mark of the registered location. 104 When using a communication module .................. 128
Set the registered place mark simple display ............. 104 Precautions when using communication equipment ...................................... 128

The name of the registered place is displayed on the map Register a Bluetooth device ..................... 128
Let ..................................... 105 Switching Bluetooth devices ............ 130
Set the 3D mark of the registered place .105 Delete the registered Bluetooth device ...
Set the sound effect of the registered location ........ 106 131 Change the provider to use ......... 131
7
 Manually set the provider to use. 132 Automatic display of beacon information ........................ 154
Set your own name ......................... 133 Set the display content of Beacon Immediate Display .. 154

Change passkey ......................... 133 Set the display time of Beacon Immediate Display .. 155

Turn on / off the radio wave emission ..................... 133 Automatically guides traffic information on the route

Set the connection of the communication module ........ 134 Let ................................................... .... 155
Set traffic jam auto guide ..................... 155
Other settings ................................ 135 Manual guidance on traffic jam information on the route

Change the illumination color Let ................................................... .... 155

<AVIC-MRZ099W> ..................... 135 View VICS character / graphic information ............. 156
Illumination colors are set in detail Display graphic information of FM multiplex VICS ........ 156

<AVIC-MRZ099W> ......... 135 Display character information of FM multiplex VICS ........ 156
Display the center information of FM multiplex VICS.
Set Orbis Point ... 135
157 Display the beacon information ..................... 157
Initialize settings ..................................... 137 Select a broadcasting station .................................................. 158

Initialize various settings ........................ 137 Check the reception sensitivity of the broadcasting station ..... 158

Function settings ..................... 138 Use of various information ....................................... 159

Change the settings ..................... 138 See detailed eco-status information ......... 159
Details of settings ..................... 138 About the display color of eco status ............. 159
Map display ................................................ ....... 138 Check the status of sensor learning ............ 159
Route / guidance ......................................... 140 Trip / pulse count / speed ........................ 159
Congestion information ................................................ ....... 143 Sensor learning ...................................................... 160
Front-rear G / Rotation speedometer ...................................... 160
Tiltmeter ................................................ .......... 160
Adjustment / correction Distance / Direction / Tilt (3D) learning level ................ 160
Check the connection status ..................... 160
Navigation correction / adjustment .......... 144
Vehicle speed pulse ................................................ ... 160
Set the volume .................................. 144 Power-supply voltage................................................ ....... 160
Set mute ..................... 144 Illuminations .................................. 160
Set the audio output destination ........................... 145 Back signal ................................................ ... 160
Correct the position of your vehicle ............... 145 Parking brake ..................... 161
GPS antenna .................................................. 161
Repair your vehicle position to a general road or a toll road
Positioning status ................................................ ....... 161
Correct ................................................ .146
Mounting position ................................................ ....... 161
Image quality adjustment .................................. 147 Bluetooth device 1 · Bluetooth device 2 ..... 161
ETC unit ................................................................................ 161
Adjust the image quality ..................... 147
On-board unit management number ........................................ 161

Touch panel adjustment ..................... 148 Card expiration date .................................................. 161
Beacon unit ................................................ 161
Adjust the touch position of the touch panel. 148
Communication module ..................................................... 161
HUD ................................................................ ............ 161

information Check the SD card information ..................... 161

Check the version information ..................... 162
Use of traffic jam information ........................ 149 Program version (navigation) .162 Map
Use VICS information ...................................... 149 data ..................................... .......... 162
Display form of VICS information .................................. 149 Search data ................................................ ... 162
View VICS information on the map ..................... 150 Program data .................................. 162
Types of VICS marks .................................. 151 Linkage data ................................................ ... 162
See details of VICS information mark .................. 151
Automatic display of emergency information .................................. 152
Basic audio operation
Set the display of VICS information .................. 152
Set the road for displaying traffic congestion information ............. 152 Basic audio operation ..................... 163
Set the traffic jam information display ..................... 152
Switching AV sources ..................... 163
Set smooth display ..................... 152
When using air gestures .................. 163
Set the blinking display ..................... 153
If you don't use air gestures ......... 163
Set the regulation display .................................. 153
Set the parking lot information mark display ............. 153
AV saw with the navigation screen
Set the section travel time display ..................... 154 Operate ............... 164
8
 About the display of the check window .... 164 Switch services ..................... 184
Turn off the AV source ........................ 164 Set TV functions ................... 184
About video AV sources ..................... 164 Details of settings .................................................. 185
Set the clock display on the video screen ............ 165

Music disc
Broadcast reception
Listen to a music CD ........................................ 187
Listen to the radio ................................... 166 Play a music CD ..................... 187
Receive radio ..................... 166 Switch tracks ........................... 187
User presets and area pres Fast Rewind / Fast Forward ..................... 187
Switch sets ..................... 166 Select a song from the list and play it ......... 188
Switch bands ..................... 167 Repeat playback ..................... 188
Automatically register broadcasting stations .................................. 167 Random playback ..................... 189
Manually register the station ..................... 167 Pause playback ............... 189
Switch preset channels .... 168 Record a music CD ....................... 190
Find a receivable station ..................... 168
To record from a CD ................................... 190
Listen to traffic information ........................ 169 Stop recording ................................................ 190
Receive traffic information .................. 169 Precautions regarding recording ........................... 190
Switching the frequency of traffic information ............ 169 Restrictions on CD recording ........................ 191
About title display ..................................... 191
Watch TV ................................ 170 Make recording settings ..................... 191
Watch TV ..................................... 170 Set the auto recording mode ..................... 191
Icon list ...................................................... 170 Set the recording sound quality .................................. 192
Switching preset types ............ 170
Manually register the station ....................... 171
Listen to ROM-Audio ..................... 193
Switch channels ....................... 171 Play ROM-Audio ........................ 193
Switch preset channels. Switch tracks ........................... 193
Eh ..................................... ......... 172 Switch folders ..................... 193
Switch 3-digit channel ..................... 172 Select a song from the list and play it ......... 194
How to operate the program guide ..................................... 172 Repeat playback ..................... 194
Switching the date of the program guide ..................... 172 Random playback ..................... 195
Switch the time of the program guide ........................ 173
Fast Rewind / Fast Forward ................................................ 195
Switching the display method of the program guide .................. 173
Pause playback ............... 196
Select the program you want to watch by genre search ............. 174

Make a viewing reservation ........................................... 174

Display the program content ............... 175 Video disc
Check / edit reserved programs ............. 176
Delete the program reservation ........................... 176 Watch DVD video ........................ 197
Get program information ............... 177 Play DVD-Video ......................... 197
Automatically register broadcasting stations (channels) Switch chapters ....................... 197
Scan) ..................................... 177 Switch titles ........................ 197
Find a receivable relay station ..................... 178 Repeat playback ..................... 198
How to operate the data broadcasting screen ............ 178 Direct tap the disc menu
Panel touch key operation ............ 178 Operate with a key ..................... 198
Watch data broadcasting ..................... 179 Disc menu disc menu
Switching subtitles ..................... 179 Operate with new operation keys ............ 199
Switching audio ..................... 180 Skip the CM and play it ........................ 199
Switching images ..................... 180 Play frame-by-frame ..................... 200
Switch audio multiplex ........................ 180 Slow play ................................................ 200
Switch bands ..................... 181 Fast Rewind / Fast Forward ..................... 201
Set wide mode ....................... 181 Pause playback ................................... 201
Display a notification message ............ 182 Display the direct touch screen ........ 201
Display version information ..................... 183 Stop playback ..................... 201
Display service list ..................... 183 Switch subtitle language ........................... 202
9
 Switch voice language ........................ 202 Track (file) in My Mix
Return to the specified position and play ... 202 Add .................................... 225
Set wide mode ....................... 203 Set wide mode ....................... 225
Switch angles .................................. 204 Initialize SD ..................... 226
Switching the audio output ........................... 204 Set the video output .................................. 226
Specify the scene you want to see and play it ......... 205 Set the TV aspect ..................... 227
Register a bookmark ....................... 205 Erasing albums / tracks ............... 228
Initialize the DVD video .............. 206
Erase the original group album
Set basic subtitles .................................. 206
Set basic audio ..................... 206
Leave ................................................ .228
Erasing the album ........................................ 228
Set the menu language ...................................... 207
Set multi-angle ........................ 207 Erase track ..................... 229
Set the TV aspect ..................... 208 Erase My Mix tracks .... 229
Set parental control ..................... 208 Erase all recorded data ..... 230
Set auto play ......................... 209
Acquisition of title information ..................... 232
Language code table ...................................................... 211
About title information ..................................... 232
Watch DVD-VR ........................... 212 Information that can be obtained ..................................................... 232

Play DVD-VR ........................................ 212 No.Title display ................................................ 232

Switch chapters ....................... 212 About editing the title ........................ 232
Switch titles ........................ 212 Get title information ..................... 232
Select a title from the list and play it .213 Get the title ..................................... 232
Get the title information of No.Title list
Repeat playback ..................... 213
................................................................ ............. 233
Specify the scene you want to see and play it ......... 214
Get title information in Navi Studio
Skip the CM and play it ........................ 214
do................................................. .... 233
Play frame-by-frame ..................... 214
Slow play ................................................ 215
Fast Rewind / Fast Forward ..................... 215 Use iPod
Pause playback ............... 216
Using an iPod ..................... 235
Stop playback ..................... 216
Switch subtitle language ........................... 216 Play iPod ..................................... 235
Switch voice language ........................ 217 iPod music and iPod video
Switch audio multiplex ........................ 217 Switch ................................................... 235
Set wide mode ....................... 217 Chapters or songs / files
Initialize the DVD-VR .................. 218 ...................................... 236
Set the TV aspect ..................... 218 Find the song you want to listen to or the video you want to see ......... 236

Repeat playback ..................... 237

Shuffle play ............... 237
Memory media Fast Rewind / Fast Forward ..................... 237
Use SD / USB ........................ 220 Pause playback ............... 238
Set wide mode ....................... 238
For groups, albums, tracks.
Set control / app mode
................................................................ .... 220
About group types ...................... 220
do................................................. .... 239
Recorded music or music files
Play a video file ..................... 220 Use Bluetooth.Audio
Switch tracks (files) ....... 221
Switch albums (folders) ... 221 Select a Use Bluetooth.Audio ............. 240
track (file) from the list Bluetooth.Audio device registration .............. 240
Play it on .................................... 221 Play Bluetooth.Audio .............. 240
Repeat playback ..................... 222 Switch tracks ........................... 241
Random playback ..................... 223 Switch groups ..................................... 241
Switch playback mode ....................... 223 Find the song you want to listen to ..................... 242
Fast Rewind / Fast Forward ..................... 224 Repeat playback ..................... 242
Pause playback ............... 224 Random playback ..................... 243
Ten Stop playback ..................... 224 Fast Rewind / Fast Forward ..................... 243
 Pause playback ............... 243 Call the memory dial and make a call.
Play manually ................................................ 244 ................................................................ ......... 258

Connect a Bluetooth.Audio device ... 244 Make a call from the incoming / outgoing call history ..................... 258

Do you call the phone number registered on the map?

Switch Bluetooth.Audio devices ... 245
................................................................ ......... 259
Operation of menu during a call ........................................ 259

Use AUX Read the memory dial ..................... 259

If the memory dial has already been read ......... 260
Use AUX (external device) .................. 246 Erase the memory dial ........... 260
Set AUX ..................................... 246 Clear incoming / outgoing call history ........................ 261
Play AUX ..................................... 246
Photorimo @ Navi compatible mobile phone ....... 262
Set wide mode ....................... 246
Photorimo @ Navi mail sending function
...................................................... 262
Sound quality setting / adjustment Send an email .................................................. 262
Resend the email ..................... 264
Audio settings ............................. 248 Register / edit the list ....................... 264
Make audio settings ..................... 248 Register / edit destinations ...................................... 264
Fader / balance setting ..................... 248 Delete the destination .................................................. 265
Loudness setting .................................................. 248 Register / edit the title ........................ 265
Equalizer setting .................................. 248 Delete the title ..................................... 266
High-pass filter setting ...................................... 249 Register / edit the text ..................... 266
Subwoofer settings ..................... 250 Delete the text .................................................. 267
Source level adjuster setting .................. 250 Photorimo @ Navi. Point information transmission function
Sound field setting (VSC) ..................................... 251 use................................................ .268
Bus booster setting .................................. 252 When set as a destination ..................... 268
When set as a registered place ..................... 268

Other features General-purpose back camera ..................... 269

Custom features ................................... 253 Set the back camera ........................ 269
Set the input of the back camera .................. 269
Use a custom key .................. 253 Set the polarity of the back camera .................. 269
Assign functions to custom keys ........ 253 Set the parking assist line display ............ 270
List of functions (commands) that can be customized .253
Adjust the parking assist line ..................... 270
Displaying the back camera image ..... 271
Other equipment Adjust the image quality of the back camera ......... 271

ETC unit ............................ 255 Rear monitor ................................ 273

About ETC related information guidance ............... 255 About the image displayed on the rear monitor
ETC card error related voice guidance ............ 255 ................................................................ .... 273
ETC card expiration related voice guidance ..... 255 About the installation location of the rear monitor ............. 273

AR.HUD unit ........................ 274

Voice guidance when passing the notice beacon ..................... 255

Voice guidance when passing through the ETC lane ........................ 255

Voice when passing through the tollhouse .................................. 255 Display the [HUD.Settings] screen. 274 Adjust the
Check ETC usage history ...................... 255 screen and image quality ........................... 274
Set voice guidance at ETC startup ........... 255 Drawing position adjustment ..................................................... 274

ETC card expiration notice. Screen size adjustment .................................................................. 275

Rotation correction ................................................................ ....... 275

................................................................ .... 256
Aspect ratio correction .................................................. 275
Normal example .................................................. ..... 256
Distortion correction ................................................ ....... 275
Example when the expiration date is the current month .................. 256
White balance ................................................................ 275
Example when the expiration date has already expired ..... 256
Set the function ..................... 275
Mobile phone (hands-free) ................ 257 Dimmer ..................................... ...... 276
Display color setting ..................................................... .... 276
If you are worried about echo (reverberation) ... 257
Clock display ................................................ ....... 276
To mitigate echo ................................ 257
Message display ..................................... 276
Receive a call ..................................... 257
ETC lane display .................................................................. 276
How to make a call ................................................ 257
Autoscale ..................................................... 276
Enter the phone number to make a call ............. 258
11 11
 Estimated arrival time display .................................................. 276 Purpose of collecting personal information ......................................... 294

Version information and license information Withdraw................................................ ..294

Confirm ..................................................... 277 Confirm the contract ..................... 295
Initialize the AR.HUD unit .......... 277 Extension / change of smart loop usage period
Operate the AR.HUD view .................. 278 Further suspension of use ..................... 295
HUD guide mode ................................................ 278 Change the usage period ..................... 295
HUD map mode ................................................ 278 Stop using ..................................................... 296
HUD Highway Mode ........................ 279 Check the license items ..................................... 296
HUD clock mode .................................. 279
About message display ............ 280 Information ................................ 297
AR.HUD Yu using Navi Studio Check the announcement ......................................... 297
Upgrade the knit version ... 281 What's new in the news ..................... 297
Upgraded AR.HUD unit.
Weatherlive ....................................... 298
do................................................. ......... 281
Get weather information ..................... 298
Display the weather forecast .................. 298
communication View weekly weather forecast information ..................... 299

Get traffic jam information via communication .............. 282

View Amedas information ............... 299

About on-demand VICS ... 282 Security lock ....................... 300

Smart loop and smart loop astringency Set a security lock ............ 300
About arrears information .................. 282 When the security lock is activated
Set up a smart loop ... 282 operation................................................. .... 300
Initial registration ........................... 282
Set probe information transmission ..................... 283
Set SD card save ..................... 283 Use Navi Studio
Set to start acquiring traffic jam information ..................... 284
Set continuous acquisition of traffic jam information ..................... 284
Use Navi Studio ....................... 302
For acquisition timing and acquisition operation of continuous acquisition Navigation Studio Functions ......................... 302
about................................................. ..... 285 Install Navi Studio ........ 302
Manually acquire traffic information ........... 285 System required for installation ............. 302
Automatically acquire traffic jam information ..................... 285 Download Navi Studio ..................... 303
Map display of traffic jam information acquired by communication Navi Studio Setup ..................... 303
About ............................................ 286 Register the SD card for navigation
Time of provision of traffic jam information received by communication ................................................................ ........ 304
Confirm ...................................................... 286 Version using Navi Studio
Up (map charge) ... 304
Free word search ..................... 287 Precautions for version upgrade ......... 304
Search by free word ............. 287 Data download and to SD card
Precautions for transfer of
Outing folder ..................... 288 Download version updater
Search in the outing folder ....................... 288 do................................................. ......... 305
Registered place, base plan, drive plastic Upgrade the navigation ..306 About data
Register with ..................... 288 transfer processing ........................ 307
How to confirm the completion of version upgrade ..... 307
TV de Mita ............... 290 About removing the SD card .................. 307
Find the spots featured on TV .... 290 For data erasure after version upgrade is completed
about................................................. ..... 307
Parking lot full sky information ....................................... 291

Acquire parking lot fullness information ..................... 291

When in trouble
Gassta Price Information ..................... 292
Is it a malfunction? If you think ......... 309
Get Gassta price information ..... 292
Registration of customer information ..................................... 293
Message and remedy ..................... 315
Register as a customer ..................... 293
Refer to / change customer registration information ........ 293

Confirm password ..................................... 294

12
 Data for seasonal taste spot search.
appendix
................................................................ ......... 332
Phone number search data .................. 332
Sensor learning ................................ 320
About logo mark display ...................................... 332
Sensor learning state needs to be reset About business hours consideration peripheral search .................. 332
In such cases ..................................... .320 Precautions regarding routes ....................... 332.
If all reset is required ..................... 320 Route search specifications .................................. 332
When distance learning reset is required .................. 320 How to search for a route ..................... 332
How to reset the sensor learning state. 320 About route painting ...................................... 333
About voice guidance .................................................. 333
Main unit reset ..................... 321 About the enlarged view of the intersection ..................... 333
Reset the main unit ..................... 321 About the paid fee on the route candidate selection screen

hand................................................. ............. 333

Types of discs that can be played .............. 322
About auto reroute ...................................... 333
Playable disc types and marks .... 322 Precautions regarding VICS information .................. 333
High-definition image quality (AVCHD / AVCREC)
About FM multiplex broadcasting ..................... 333
About discs recorded in (standard) .. 323 About Beacon .................................. 333
Playback of "Dual Disc" ..................... 323 Contact information for VICS Center .............. 333
Meaning of the mark displayed on the DVD ... City map (detailed city map) recording d
323 Operation of the disc ..................... 323 rear................................................. .... 334
Disk configuration ..... 324 Maintenance area 95% or more (459. City) .............. 334
Maintenance area 80% or more (68. City) .................. 334
DVD video ...................................................... 324 Maintenance area 50% or more (161. City) .............. 334
Movies, etc ................. ....... 324 Maintenance area less than 50% (646. City) .............. 335
Karaoke disc ................................................................ 324
Contact from Hanshin Expressway Co., Ltd .... 336
CD ................................................. .......... 324
About the recording database ..................... 336
Of files and media that can be played About map data ..................... 336
About road data ..................................... 338
Type ................................................... 325
Traffic regulation data ...................................... 338
About audio codec ....................... 325 About toll road toll data ........................ 338
List of supported audio codecs .................. 325 Highway mode target routes ........................ 338
About video codec ..................... 326 About VICS service area .................. 339
<AVIC-MRZ099W / MRZ099> pair About the data of the broadcasting station list .................. 339
List of video codecs ........................... 326 About visiting home (individual home) phone number data. 339
Compatible with <AVIC-MRZ077 / MRZ066> About traffic jam prediction data ...................................... 340
List of video codecs ..................... 326 About bottleneck railroad crossing data ............. 340
Audio codec and video codec Other information sources .................................................. 340

About the combination ..................... 327

Index ...................................................... 341
Navigation mechanism .................. 328
How to know your current location ........................... 328
Positioning by GPS .................................................. 328
Positioning by self-contained navigation ..................... 328
Mechanism for improving positioning accuracy ........ 328
Role of 3D hybrid sensor .............. 328
Map matching ................................................................ 328
About error ..................................................... 329
Error due to GPS positioning failure ........................... 329
Error due to GPS satellite itself ........................................ 329
About errors on toll roads and elevated roads ............. 329
About own vehicle position accuracy at low speed .................. 329

About the parking lot map ..................... 329

Other errors ..................... 329

Other information ................................ 332

About the database in search .... 332
About town page data ..................... 332
Data on natural objects .................. 332
13
 How to read this book

How To Understand This Book

lLABELS MEANING

[CAUTION MARK] Caution mark

Explains what you should be careful about in operation and what you should be careful about
while maintaining the performance of this product.

[NOTE] Note
Explains tips and convenient usage for operation.
[BLACK RETURN BUTTON] Represents a touch key.

[FUNCTION SETTINGS]
Represents the items that can be selected in the AR.HUD unit.

[MENU]
Represents a button on the main unit.

We will guide you to the text titles and pages you want to refer to, or other
[Italics] manuals.

Press and hold / touch for a long time Indicates that you press (touch)until you hear a beep.
Keep pressing / keep touching Indicates that it works only while it is being pressed (touched).

Note
!. In this manual, SD memory card and SDHC memory card are collectively referred to as "SD card".
!. In this manual, iPod and iPhone are collectively referred to as "iPod".
!. Illustrations and screen examples used in this manual may differ from the actual product.
!. The screen of the actual product is subject to change without notice for performance and function improvement.
!. "In this manual, "NAVI*STUDIO(FOR RAKU NAVI/EV NAVI). VER. 3.1.0 IS REFERED TO AS "NAVI STUDIO.

14
BASIC OPERATION
The operation of this unit is performed by touch panel operation, button operation, and air gesture.

!. Use your palm as an air gesture sensor

Turn Basics
Operate by directly touching the operation touch keys !. Finger close
displayed on the screen.
!. Use the range of 5 cm to 15 cm as a guide.Written
Bring your hand close to the earth gesture sensor
Or waving
!. From end to end of this machine, air gesture
Shake to swiftly pass in front of the sensor

■ Outing launcher and check

Window, air gesture
Hand gesture function setting switching key

End the current open menu etc. How to display

END
Finish and return to the original screen.
1 . Air gesture mark is displayed
Pictures such as currently open menus
RETURN On the screen that is being, Air Jess
From the side, it returns to the previous screen.
Hands close to the char sensor
Attach
Sounds, outing launcher and check
You can use the buttons on the unit to switch Window, air gesture hand gesture function
screens, display menu screens, and operate audio. The setting switch key is displayed.

This unit supports air gestures.

Air gesture is a function that allows you to operate the unit
without directly touching the screen or buttons by bringing
your hand close to the air gesture sensor or waving your hand
left or right in front of the air gesture sensor. There are two types
of hand gesture settings that a be used, adjusted and altered.

PLEASE NOTE
!. Use / do not use air gestures
Sensitivity setting of arc gesture sensor, hand gesture
Direction of operation and function to operate, outing run
Char and check window display time, d
The operation sound of the arc gesture is Air Jess
You can change it to your liking in the char settings.
vinegar. →"Setting an air gesture" on P16

■ Points of air gesture

To make it easier to recognize air gestures
Please be careful about the points below. 15
 Touch the outing launcher to select ■ How to perform hand gesture operation
Perform the function.
Frequently visited ranking search →P60
1 . Air gesture mark is displayed
Go often
"Search from the destinations you often go to" On the screen that is being, Air Jess
Peripheral search →P58 "Peripheral facilities To pass in front of the char sensor
seek"
neighborhood

Wave your hand left and right

Congestion check →"Congestion information" on P149 The map scale spreads over a wide area each time you wave your hand to the left
Basic Traffic jam
Use of information " Switch and switch in detail each time you shake to the right
Book Home registration ./. Finding a route to your home I will.
Manipulation one's home Search and guidance →"Register your home" on P100
Written
do"
Display of AV menu →"AV. Menu"
AV source
on P22
Songs and programs selected in the AV source
</ />
To switch.
Execution of custom function →P253
custom
"Custom function"
Air gesture hand gesture function setting switching
Touch the key to turn off setting 1 and setting 2.
It will be replaced.
Whether the current setting is setting 1 or setting 2 is air
You can tell by the gesture mark.
: Air gesture hand gesture function is set
It is in the state of being switched to "fixed 1".
: Air gesture hand gesture function is set
It is in the state of being switched to "fixed 2".

Note
!. Air gesture depending on the condition of this machine
Mark and air gesture hand gesture function settings
The switch key changes. Note
— .. (Air gesture mark) / (Workman

!. Continuous operation is not possible in consideration of safety.

Argestion hand gesture function setting switching
E key): For air gesture sensor
Displayed when the sun is in direct contact
It will be. Air gesture works correctly
Set air gestures
It will cause you not to make it, so air gel
Block the light that hits the sture sensor ■ Set ON / OFF
Please. Set whether to use the air gesture function
— .. (Air gesture mark) / (Workman increase.
Argestion hand gesture function setting switching
E key): For air gesture sensor
1 ..Usage settingsTouch
Displayed when something goes wrong
increase. Please consult your dealer.
!. Depending on the screen displayed, Airje
Even if the sture mark is not displayed
Argestion may be possible.
!. The check window is AV information on the navigation screen
Navigation information is displayed on the information and AV screens.

"× CloseTouch "" to temporarily close the check

window.

16 16
 2 ..useordo not useTouch 1 ..Hand gesture settingTouch

Basic
Book
Manipulation

Written

2 ..Setting 1orSetting 2Touch

■ Set the sensitivity
Set the sensitivity of the air gesture sensor
increase.

1 ..Sensitivity settingTouch

3 Touch the action you want to set and wave your hand
Touch in the direction

2 ..HighorLowTouch

Four
..returnTouch

■ Set a check window

3 ..returnTouch Set whether to display the check window
increase.
Note
!. Higher sensitivity makes it easier to react even from a distance
1 ..Check window settingsTat
Become. Chi

■ Set the gesture

Set the action when waving and the direction of waving
increase. Two types of settings (setting 1 and setting 2) can be set.

17 17
 2 ..indicateorDo not showTo touch 1 ..Sound settingsTouch

Basic
Book
Manipulation

Written

2 . Touch the action to set the sound

3 ..returnTouch
Note
! ""
When set to "Display", AV information is displayed on the navigation
screen and navigation information is displayed on the AV screen.
increase.

■ Set the display time

Outing launcher, check window, etc.
Set the display time of.
3.. Touch the sound you want to set and
1 ..Display time settingTouch SettingTouch

2 ..shortorstandardorlongTo touch Four

..returnTouch
Note
!. On the screen of step 2Bring your hands closerWhen you touch, you will hear

the sound when you bring your hand closer and after you release it.

Can be set.
!. On the screen of step 3ConfirmationTouch to step 2
andBring your hands closerIf you select, the sound when you bring your

hand closer and the sound when you release your hand are continuous.

Will ring. Also, in step 2Hand gesture (to the left) orHand
gesture (to the right)If you select, the hand waving sound
will be heard continuously.

■ Set the gesture sound

When you put your hand close to the air gesture sensor How to switch screens
Sound effect when you wave your hand again after releasing your hand You can switch between the navigation screen (map
To set. screen) and the AV source screen (audio screen).

Note
!. Touch inside the check window to open the screen
You can also switch. →P164
"About the display of the check window"
18 18
■ Set an interrupt to the AV screen 1 .. current location Press and hold

Various navigations while the AV source screen is displayed ▼

Information can be temporarily interrupted and displayed.
increase. The screen will disappear temporarily.

1 .. menu Press,Setting / editing-Function Note

settingsTouch !. Touch the screen during Navi Standby or
current location ,AV , menu Press to cancel the
2 ..Interruption to AV screen Tat navigation system.
Basic
Book
Chi !. Navigation voice during navigation standby Manipulation

No guidance is output. Audio audio Written

It will be output.
!. When the following functions work during Navi Standby
Temporarily cancels the navigation standby.
— .Back camera image display
—. When receiving a call

—. When receiving an emergency alert broadcast

!. Function is canceled only when the back camera image is displayed.

After that, it automatically returns to the navigation standby mode.
increase.

3 .Tap to the item to be interrupted

Chi List screen operation
This section describes the common operations on the list screen displayed
during operation.

■ Basic list operations

Proposal for crossing pointsInterrupt display of intersection guidance display

Inside display increase.

Beacon information is interrupted and displayed

beacon
increase.

Root advertiserDivide route advisor information Page feed

Iser Display inclusive. Touch,
Move one screen at a time.

Note Tab selection

Tabs (egRoute / guidance) In the tabbed list,

!. You can select multiple items to be interrupted. touch Select Cut into a list of tabs
vinegar. OFF if no item is selected It will change.
It will be. At the time of shipment from the factory, all are selected.
It has become. Note
When emergency information or data update
!. Depending on the tabbed list screen you are viewing
message is interrupted even if it is set to! .OFF
By touching the tab, each tab
there is. It also displays the first line of the list classified as
!. Beacon connects an optional beacon unit there is.
You can select it if you do.

Temporarily turn off the screen (Nabis

Tambai)
You can temporarily turn off the screen at night or when the
screen is dazzling.

19 19
 Menu operation
This section explains the basic operation method of the menu of this unit.

Search from the registered location.

Central menu operation
Registered place* 1

Is it the history of the places searched so far?

Search history* 2
BasicThe central menu is a collection of various menus of this machine. Search from.
BookIt is a menu that has been turned up. To use various functions Search by destination genre
ManipulationThe display of the central menu is basic. Genre
increase.

Written 1 .. menu Press one's home Explore the route to your home.
▼ Ranki I often go toRanking of frequent destinations
Ng* 3 Search from the list.
The central menu is displayed. Dedicated sir using communication function
SmartLoop* 4 Various inspections by connecting to the bar and communicating

Make a search.
* 1: When there is a registration point
* 2: When there is a search history
* 3: When there is ranking information
* 4: When communication connection is possible

■ AV. Menu
It is a menu to enjoy music and videos.

AV.OFF Turn off the AV source.

View Display the view menu.
information Display the information menu.
Setting / editing Displays the setting / edit menu.
cell phone Display the mobile phone menu.
root* Display the route menu.
*: If there is a route being guided

■ NAVI. Menu
NAVI → NAVI. Switch to the menu.
It is a menu to search for a place or destination.
Inserted disc (DVD,
DISC * 1 Play a CD, ROM, etc.).
(example:CD) Depending on the inserted disc, the display may be displayed.

it's different.
Music / video data in the SD card
MSV / SD Play.
* 1. * 2 Music data recorded on the SD card
You can play it.
Music / video data in the SD card
SD* 1. * 3
Play.
← AV Switch to the AV. Menu. FM Receive FM.
Enter the destination in hiragana and check AM Receive AM.
I will search. Genres and areas DTV Receive TV broadcasts.
name
Specify and narrow down the search Bluetooth.Music Day for Bluetooth.Audio Devices
And you can also. Audio Play the data.
Enter the destination address to search Play music / video data from iPod
address iPod* 1. * 4
increase. increase.
Search the location or map of your vehicle Replay the music data in the USB memory
USB* 1. * 5
Peripheral facilities Rolled position and around the route I will live.
Search for a specific facility from. Video camera connected to this unit, etc.
Enter the destination phone number to search AUX* 1. Plays the video and audio of * 6 external devices.
phone number
You can increase.

twenty two
Transportation information Receive AM traffic information. Display the toll road dedicated screen. Forward
Distance to toll road facilities, fees, and forecasts
* 1: Ready for playback or an AV source that is not connected High way
Arrival (passing) time, signboard for branching
You cannot select an AV source that has not been created. mode*
Will be displayed. When driving on a toll road
* 2: For "AVIC-MRZ099W / MRZ099" and when an
SD card is inserted Only valid.
* 3: In the case of "AVIC-MRZ077 / MRZ066" Normal display A normal map is displayed.
And when an SD card is inserted A map with enlarged text information is displayed.
Character enlargement
* 4: When an iPod is connected It will be. Basic
* 5: When a USB memory is connected A map emphasizing road information is displayed Book
Road emphasis
* 6: When the AUX setting is turned on in the source-specific settings. It will be. Manipulation

Go →"Set AUX" on P246 Map orientation Set the orientation of the map. Written

Note 100 m
One-way street at 100 m scale
Kale one-way
!. In the following cases, the central menu is AV. Set the display of the button.
Line display
It is displayed in the new state.
Logo mark tableSet up a logo mark to be displayed on the map
— .During AV source playbackAVPress and hold
Show setting Set.
— .On the navigation screen with the AV source
turned offAVPress Scale registration You can register the scale.
Peripheral search connectionLogo displayed by peripheral search Fruit
Remove the mark.
■ View menu
erasure

*: When driving on a toll road

Map display method, map orientation, etc.
This is the menu for setting.
■ Information menu
This menu displays various types of information that can be used with this
unit, such as route information and VICS information.

Display a flat map. Details City

In the city map recording area, from 10 m
normal
Detailed city at 50 m scale
View
The city map is displayed (Citymat) Route informationCheck and edit the route currently being guided

P). Information* 1 increase.

A map that looks like you are looking from the sky VICS. Information of characters and figures can be confirmed.

indicate. Detailed city map recording area increase. Also, traffic jams using communication
Congestion information

Sky viewThen, on the scale of 10 m to 50 m Information (On-Demand VICS./Smart

Sometimes a three-dimensional city map is displayed Troop) can be obtained.
(Sky City Map). WeatherWeather information if communication is
A map that looks like the driver's eyes possible live To get and display.
Display. Flat ground on a small screen EcostatorGraphs and eco-status contents
The figure is displayed (side map). Details It is displayed in detail by index etc.
DriversThe map of the side map is scale-changed Sensor learning status and connected machines
View You can further scroll. root System information The state of the vessel, the free space of the SD card
During guidance, auto angle change Check the information.
The function automatically changes the viewpoint
BajoData bar recorded in this unit Information
increase.
Displays John information.
The map screen is displayed in two parts. Ground
Twin view MapThe displayed map information can be displayed in a 2D
You can change the scale of the figure. bar. lip Convert to code (QR code).
Map screen and AV source screen at the same time
Optional ETC unit connected to this unit
AV sideDisplay. Tap on the AV source screen View ETC use shoes
Of the ETC card inserted in the
Then, on the operation screen of the AV source History* 2
Display the usage history.
It will switch.
Prob informationSave the probe information to the SD card Information
storage increase.
twenty three
 * 1: When there is a route being guided Enter the phone number to make a call
* 2: ETC unit is connected and ETC car Dial dial
increase.
If is inserted MemoridaMemory diamond read into this machine
Iyar Display a list of all.
■ Setting / editing menu Display a list of incoming / outgoing call history
Various navigation and audio settings and editing Call history
increase.
It is a menu to do. Information such as location information and estimated arrival time
Email*
Basic You can send the information by e-mail.
Book Memory dial data and incoming / outgoing calls
Manipulation
Edit / Erase History, edit / delete sent emails
Written
You can leave.
*: Connect a mobile phone compatible with Photorimo @ Navi
If
Note
!. The mail function is a mobile phone compatible with Photorimo @ Navi.

Only available when using talk.

Registered place, each history, drive plan
Data editing
Which data to edit.
Root editionCheck and edit the route currently being guided ■ Route menu
collection* 1 increase. Change or delete the route searched or the route being guided
Audio settingAudio quality and output speed It is a menu to leave.
Fixed* 2 Set the car etc.
Settings by source Make settings specific to each AV source.
Set the navigation function.
Function settings

Smart rouxTo use smart loop

Settings Make the settings.
Whether or not to use the fuel consumption estimation function is para

Fuel costs carMeter (fuel consumption unit, displacement, etc.

Both settings Settings), vehicle information input, stearin
You can set the remote control.
Adjust the volume and the position of your vehicle.
Re-search the route.
Adjustment / correction
Re-search
Bluetooth, custom buttons,
Another route Search for another route.
System setting Set each function such as curity
increase.
erase Delete the route being guided.
Lou, assuming that he has passed the next stop
Plan / HanNavigation guidance volume and hand Zufrey Stop-off place
soundFreeze volume, ON / OFF of operation sound Amount
Search again.
setting To set.

My set
Follow the instructions on the screen to install the basics of this machine.

Sure, practice air gestures

Shortcut menu operation
up This menu is displayed after moving the map or searching for
I will do it.
a place. You can search for routes, register points, and search
* 1: When there is a route being guided for nearby facilities.
* 2: When using the AV function

■ Mobile phone menu

Connect your mobile phone to make hands-free calls and send emails
It is a menu to perform communication.

Peripheral facilitiesThe facilities around the cursor position, Jean

Find Select and search.
MapMap the cursor position (2) lip
It is displayed as a dimensional barcode).

twenty four
Operation of map screen
There are two types of navigation map display: the "current location screen" that displays the current location of your
vehicle (own vehicle), and the "scroll screen" that displays the location you want to see.

While recording from a music CD to an SD card

Display the current location screen *
It shows.
No matter which screen you are viewing, you can quickly return to Accumulated in navigation
your current location screen. Probe information is the upper limit of storage size
vegetable
Displayed when approaching. Bi
1 .. current location Press
If the mark is displayed, the plow Ge
▼ Save the information on the SD card -
The current location screen is displayed.
To the server using Bistudio Shi
Please upload. Yo
Accumulated in navigation Hmm
Probe information is the upper limit of storage size Basic
It will be displayed when it is reached. Mar Book
If the message is displayed, the probe information is displayed. Manipulation

Written
Save the information to the SD card and use Nabisuta

Upload to server using Geo

Please load.
Book with the mark displayed
You can also use the machine
However, the accumulated probe information is old
Note It will be erased in order from the oldest one, and the new one will be deleted.

Lobe information is accumulated.

!. With the current location screen displayedcurrent
locationPress to switch to the registered map scale Photorimo @ Navi compatible mobile phone contact

(When displaying on the registration scale) Table when there is a missed call at the time of continuation

Does not work). →"Registering a map scale" Will be shown.

on page 43 Photorimo @ Navi compatible mobile phone contact

Table when there are unread emails at the time of continuation

Will be shown.
■ Information displayed at the bottom of the screen
Weather forecast by Weatherlive (Ki)
Various eyes are displayed at the bottom of the screen depending on the usage status of this unit.
Elephant information, expected temperature, probability of precipitation)
The computer is displayed.
Displayed if you are getting. Devil
Icon example Display conditions Also, the forecast time of the acquired weather forecast

Route guidance with silent guide Display. Destination when setting a route
It will be displayed in. If there is no route setting in the vicinity, your current location

Recognize the SD card inserted in this unit Displays the forecast in the vicinity. (Forecast
It is displayed when it is. The car mark on the right indicates the vicinity of your current location

Navi Studio MSV Title D To do. Check if near the destination

Reflecting the edited contents in the data, It is a car flag. )
* An optional ETC unit is connected
Displayed while erasing all recorded data
increase. And the ETC card is inserted
Accumulated in navigation Will be displayed if. ETC card
Robe information is being saved to the SD card
If the expiration date has expired,
A red diagonal line is displayed above the icon
Will be displayed if.
increase.
Displayed when updating map data, etc.
increase. During the update, the progress is shown in%
Bluetooth device hands-free
Will be shown. Displayed when continued, base
Radio strength between station and Bluetooth device
When the update mark is displayed
Do not remove the SD card Indicates.
when.
Day again using Navi Studio
Need to download
Will be displayed if.

31
 Bluetooth device is connected
When is displayed in blue, when not connected
If it is displayed in gray. Radio wave emission
When is set to OFF
And displayed when voice guidance is OFF
I can't.
Displayed when voice guidance is turned off
Will be done.
If the communication function is available,

vegetable
Of the smart loop portal site
Bi When a message arrives in the notification, a table

Ge Will be shown. The most important message

- Red if unread, other messages

Shi White Aiko if sage is unread
Yo Is displayed. Message
Hmm When all are in the read state, the icon will be
Basic It disappears.

Book*: For "AVIC-MRZ099W / MRZ099"

Manipulation

Written Note
!. Only one type of icon of the same type is shown at a time.
Not all are shown.

32
■ How to see the current location screen

Normal view

Kale display
Direction mark
Current time The red triangle in the direction mark indicates north.

vegetable

Bi
Ge
-
Shi
Yo
Own car mark
Hmm
Basic
Book
Trajectory display

Manipulation

Written

Information window display

VICS level 3 information provision time display

Note
!. When using this unit for the first time or when it has not been used for a long time, it may take about 5 minutes to display the
current location.
!. Your vehicle mark may deviate from your actual location.
!. The track display can display the travel track for about 1000 km that has been passed so far. Usually white, the speed of the car
When it is less than 5 km / h, it is displayed as a red dot, and when it is 5 km / h or more and less than 20 km / h, it is displayed as an orange dot.

!. You can change the display contents of the information window. →"Information window settings" on page 48
!. When you bring your hand close to the air gesture sensor,View,detail,Wide areaIs displayed and the display method is changed.
→ "Setting the map display method" on page 37And scale change →"Changing the scale of the
map" on page 36You will be able to.

3 . Touch the item you want to set

Set the map
■ Set map color switching
Set the timing when the map color is switched.
At the time of shipment from the factory, it is "time-linked".

1 .. menu Press,Setting / editing-Function

settingsTouch
2 ..Map color switchingTouch
The color scheme of the screen is linked to the sunset / sunrise time
Time interlocking
It will switch.
Screen layout by turning on / off the small light
The color will switch.
Illumination interlocking

Day color fixed It always stays on the daytime screen.

■ Set the travel locus display

Set whether to display the travel track on the map.
It is "ON" at the time of shipment from the factory.

33 33
 1 .. Press,Setting / editing-Function
menu
settingsTouch
2 ..Travel locus displayTouch

Each time you touch the arrow, the map moves little by little
vegetable

Bi to come.
Ge once againTweakTouch to remove the arrow marks
- in 8 directions.
Shi Note
Yo 3 ..ONorOFF OFFTouch
Hmm !. When touching the map, depending on the angle of the hand etc.
Basic Air gesture sensor does not respond
Book In that case, even if you touch it, you will go out
Manipulation Just display the launcher and scroll
Written I will not do it. Scroll from that state
Touch the place you want to see again
when.
!. Move your finger while touching the screen to scan
You can also roll.
!. Tap at a location away from the cursor in the center of the screen
The more you click, the faster you scroll
ON The running track is displayed.
increase.
OFF OFF The travel track is not displayed.
!. If you scroll while driving, touch
Scroll to where you want to stop.
Move the map
Display the place you want to see (scroll). ■ About active info
Scroll the map or use the map in the search results
1 . Touch in the direction you want to see on the map [] Is displayed, and the marks and facility information around the
▼ scroll point are automatically displayed on the screen.

The map is centered on the touched location

(Active info)
will move.

The following marks and information are displayed.

!. VICS regulation mark
2 If you want to fine-tune the position,Tweak
!.Logo
Those who want to make fine adjustments after touching
!. Guidance marks such as destinations and stopovers
Touch the direction arrow (8 directions)
▼ !.Facility information

!. Registered place

Note
!. I want to set the scrolled point as the destination
If Please touch.

34
 ■ How to read the scroll screen
The scroll screen is displayed when you move the map.

Normal view

vegetable

Bi
Ge
-
Shi
Yo
Hmm
Basic
Book
Manipulation

Written

■ View mode when scrolling ON

Normal view of scroll screen
Fix to.
Set Normal view of scroll screen
Whether to fix the scroll screen to the normal view OFF OFF
Do not fix to.
To set.
It is "OFF" at the time of shipment from the factory.

1 .. menuPress,Setting / editing-Function Change the scale of the map

You can change the scale of the map within a range of 10 m.
settingsTouch
To .500 km.
2 ..2D (normal view) fixed scroll 1 .Hand on air gesture sensor
LeTouch Bring closer,detailorWide areaTo
touch

3 ..ONorOFF OFFTouch
▼

36
 A more detailed map will be displayed. table Display a flat map. Details City
detail
The range shown will be narrower. In the city map recording area, from 10 m
normal
The map is displayed in a wider range Detailed city at 50 m scale
View
Wide area vinegar. Narrow roads etc. are displayed The city map is displayed (Citymat)
plug. P).
Direct A map that looks like you are looking from the sky
Wide area / Displayed by touching details
Scale indicate. Detailed city map recording area
The map is displayed on the scale you touched.
Key (example: Sky viewThen, on the scale of 10 m to 50 m
I can show you.
100 m.) Sometimes a three-dimensional city map is displayed

Direct scale keys and keys (Sky City Map).

vegetable

Turn off the kale gauge. A map that looks like the driver's eyes Bi
Display. Flat ground on a small screen Ge
Note The figure is displayed (side map).-
DriversThe map of the side map is scale-changed Shi
!. 10 m, 25 m, 50 m, with each touch View You can further scroll. root
The scale display changes to 100 m, 200 m, 500
Yo
m, 1 km, 2 km, 5 km, 10 km, 20 km, 50 km, 100
During guidance, auto angle change Hmm
The function automatically changes the viewpoint Basic
km, 200 km, and 500 km. increase. Book
The map screen is displayed in two parts. Ground Manipulation
!.detailorWide areaIf you keep touching, the Twin view
You can change the scale of the figure. Written
scale will change gradually (free zoom). just
Map screen and AV source screen at the same time
However, for safety while driving, operate the free zoom.
AV sideDisplay. Tap on the AV source screen View
You can not.
Then, on the operation screen of the AV source
!. The map is displayed on 2 screens (twin view) It will switch.
If so, change the scale on each screen
Display the toll road dedicated screen. Forward
to come.
Distance to toll road facilities, fees, and forecasts
High way
Arrival (passing) time, signboard for branching
mode
Change the map display method Will be displayed. When driving on a toll road
Only valid.
You can change how the map is displayed according to different
situations.
Note
1 .Hand on air gesture sensor !. Scale is 50 m on Sky City Map
Bring closer,ViewTouch Up to 200 m in Sky View
3D landmark (3D mark) set as a point
Is displayed.
!. Normal land automatically near the boundaries of the city map
The display switches to the figure. City map
You can also display the boundaries of. On the spot
In that case, only the city map is displayed near the boundary line.
Nothing is displayed outside the border.
!. In Driver's View, the image of the sky changes according to
the area, weather forecast, and time. rice field
However, it is different from the actual landscape.

2 . Touch the display method

Set the map display method
■ Twin view left screen angle
Set
Set the angle of the left screen when displaying twin view
To do.
The factory default is "3D".

1 .. menu Press,Setting / editing-Function

settingsTouch

37 37
 2 ..Twin view left screen angleTo 3 ..High speed maporNormal map
touch Touch

vegetable

Bi
Ge
-
Shi 3 ..2Dor3DTouch
High speed map A fast map is displayed.
Normal map The normal map is displayed.
Yo
Hmm
Basic ■ Highway mode side map
Book
Manipulation
Set the angle
Written
Highway mode side map angle
Set.
The factory default is "2D".

1 .. menu Press,Setting / editing-Function

settingsTouch
Display the left screen in normal view
2D 2 ..Highway mode side map
increase.

3D
Display the left screen in sky view NguruTouch
increase.

■ Set a highway side map

Set display of side map in highway mode
To do.
The factory default is "high speed map".

1 .. menu Press,Setting / editing-Function

settingsTouch
2 ..Highway side mapTat
3 ..2Dor3DTouch
Chi

Side map in normal view

2D
It shows.
Side map is a table with sky view
3D
Will be shown.

■ Driver's View Side Matt

Set the angle
Driver's view side map angle
38 To set.
The factory default is "2D". 3 ..2Dor3DTouch
1 .. menu Press,Setting / editing-Function
settingsTouch
2 ..Driver's View Side Map
angleTouch

vegetable

Bi
Side map in normal view Ge
2D
It shows. -
Side map is a table with sky view Shi
3D Yo
Will be shown.
Hmm
Basic
3 ..2Dor3DTouch ■ Set the city map Book
Whether to display the city map when displayed on a Manipulation

scale of 50 m or less in the area covered by the city map Written

Set.
It is "ON" at the time of shipment from the factory.

1 .. menu Press,Setting / editing-Function

settingsTouch
2 ..City mapTouch

Side map in normal view

2D
It shows.
Side map is a table with sky view
3D
Will be shown.

■ AV side view angle is set

To determine

Set the angle of the side map of AV side view

Set. 3 ..ONorOFF OFFTouch
The factory default is "2D".

1 .. menu Press,Setting / editing-Function

settingsTouch
2 ..AV side view angleTat
Chi

ON The city map is displayed.

OFF OFF A normal map is displayed.

■ Set up a sky city map

When the city map is displayed in sky view
Set whether to display buildings etc. in 3D.
It is "ON" at the time of shipment from the factory.

39 39
 Note 3 ..ONorOFF OFFTouch
!. It can be operated when the city map setting is
"ON".

1 .. menu Press,Setting / editing-Function

settingsTouch
2 ..Sky city mapTouch

vegetable

Bi
Ge The boundaries of the city map are displayed
ON
- increase.
Shi Do not show the boundaries of the city map
Yo OFF OFF
Switch to the regular map.
Hmm
Basic
Book ■ Set auto angle change
Change the viewpoint of the driver's view at the guide point
3 ..ONorOFF OFFTouch
Manipulation

Written Set whether to do it.

It is "ON" at the time of shipment from the factory.

1 .. menu Press,Setting / editing-Function

settingsTouch
2 ..Auto angle changeTat
Chi

The building of the city map is displayed three-dimensionally

ON
It will be.
The building of the city map is displayed in a plane
OFF OFF
It will be.

■ Set the city map boundary display

Boundary when leaving the area covered by the city map
Set whether to display the line. 3 ..ONorOFF OFFTouch
It is "OFF" at the time of shipment from the factory.

Note
!. It can be operated when the city map setting is
"ON".

1 .. menu Press,Setting / editing-Function

settingsTouch
2 ..City map boundary display Tat
Chi ON
Automatic driver's view perspective
To raise the target.
Automatic driver's view perspective
OFF OFF
Do not change.

Set the target map

The target map is a function that emphasizes and displays
specific information among the various information displayed
on the map.
40
 1 .Hand on air gesture sensor 2 ..Map orientationTouch
Bring closer,ViewTouch

vegetable

Bi
▼ Ge
-
2 ..Character enlargementorRoad emphasisTo Cut to heading up or north up
Shi
It will be replaced.
touch Yo
Hmm
One way on a 100 m scale Basic
Book
Display the mark Manipulation

Automatically on city map (10 m-50 m scale)Written

The one-way mark displayed in can also be
displayed on a 100 m scale.
1 .Hand on air gesture sensor
Bring closer,ViewTouch
Enlarge the characters of place names and facility names
Character enlargement
to come.
Display with an emphasis on information about roads
Road emphasis
To do.

Note
!. Character enlargement is displayed on a scale of 20 km or less, and
road emphasis is displayed on a scale of 1 km or less.

Turn the map 2 ..100m scale one-way display To

In normal view, you can choose from two types of map touch
orientation (map orientation).
(Hedin so that the direction of travel is always up, the ground
(Gup) The figure will rotate automatically.
(Nose North is always displayed up)
increase.

1 .Hand on air gesture sensor

Bring closer,ViewTouch

▼
It switches between ON and OFF.

Note
!. Table for sidemaps in highway mode
I can't show it.
!. Set the map scale to something other than 100 m
If so, turn this function on automatically.
Switch to 100 m scale.

41 41
 Five
..returnTouch
Select the logo mark and put it on the map
6 ..endTouch
indicate ▼
Logo marks of various facilities (convenience stores, etc.)
can be displayed on the map. Map with the logo mark of the selected genre or facility
It will be displayed above.
1 .Hand on air gesture sensor Stop displaying the logo mark on the map screen at once
Bring closer,ViewTouch If you want, on the screen of step 3OFF OFF
Please touch.
vegetable

Bi Note
Ge !. Repeat steps 3 and 4 to select another facility
- please.
Shi !. If there is no facility data in the selected genre
Yo Is a table with the logo mark of that genre on the map
Hmm Will be shown.
Basic
Book
Manipulation ■ Set the logo mark display scale
Written 2 ..Logo mark display settingTouch Scale to display logo mark and peripheral search results
Set.
The factory default is "1 km scale or less".
1 .. menu Press,Setting / editing-Function
settingsTouch
2 ..Logo mark display scaleTat
Chi

3 Jean who wants to display the logo mark

Touch

3 . Touch the item you want to set

Four
. Touch the facility

100 mLogomar on a scale of 100 m or less Below

kale Is displayed.
2 0 0 mLogomar on a scale of 200 m or less
Below kale Is displayed.
The indicator of the selected facility lights up and pulls 5 0 0 mLogomar on a scale of 500 m or less
You can continue to choose. Below kale Is displayed.
When you touch the facility again, the indicator will change. 1 km scaleLogo mark on a scale of 1 km or less
Turns off and the selection is canceled. Below Is displayed.
42
 Note
Register the map scale !. In normal view or sky view
current location The scale displayed on the map screen when you press
When this operation is performed,Highway mode scale
You can register each map for each display
registerIs displayed. Normal view again
method.
If you are driving on a toll road with Sky View
!. In Twin View, scale climb on the left screen teeth,Highway mode scale registrationTouch
You can record. Then, on the side map of highway mode
You can register the scale for it.
!. Driver's view and AV side view,
In highway mode, on the side map
You can register the scale. About the side map vegetable

Bi
1 .Table the map on the scale you want to register Highway mode display and list drawing to find a place Ge
Show
When the surface, information screen, etc. are displayed, the map screen -
is displayed on the right side of the screen (side map). Shi
2 .Hand on air gesture sensor Yo
Bring closer,ViewTouch ■ Highway mode Hmm
In highway mode, you are at your location or scroll Basic
A map of the previous facility will be displayed on the side map. Book
Manipulation

Written

3 ..Scale registrationTouch
Note
!. Where maps and information are displayed in the side map
If you touch it, a full-screen map or the selected facility
You can view the detailed information of.

■ List screen
It is selected on the list screen such as when searching for a place.
A map of the area around the facility is displayed on the side map
It will be.
Four
..registerTouch

▼ ■ Candidate display screen

It is selected on the candidate display screen when searching the surrounding area.
The map screen will return to the registered scale.
An arrow mark will be attached to the facility you are in.

43
vegetable

Bi■ Information screen

GeInformation screen on VICS graphic information and character information screen
-At the same time, the map around the vehicle position becomes a side map
ShiIt shows.
Yo
Hmm
Basic
Book
Manipulation

Written

44
Map screen while driving
While driving, various voice guidance and map display are performed.

2 ..Toll road caution points / prefectural border informationTat

Voice guidance while driving
Voice guidance will be provided according to the driving
Chi
situation (safety information).

Ten kilometers from here to about 〇 km away

vegetable
Please be careful about minute operation.
Bi
Toll road caution area There is a confluence ahead (point from the right, Ge
prefectural border guide)There is a confluence)
(The confluence from the left -
There is), please be careful. Shi
Enter the prefecture. Yo
Railroad crossing guidance This is the railroad crossing. Please be careful. Hmm
Approximately 300 m ahead, right turn lane Basic

There is a lane dedicated to turning left Book

Dedicated to turning left and right). Please be careful. Lane
3 ..ONorOFF OFFTouch Manipulation

Written
guidance Approximately 300 m ahead, there are lanes dedicated

to turning right and turning left. please note

please give me.

It's about 2 hours to refre. Break and guide

Isn't it?
Light point The sun will soon set. Light guidance
Please acknowledge.

Note
!. For toll road caution points and prefectural border information, drive on the toll road
ON You will be guided.
Only done inside.
OFF OFF I will not be guided.
!. There is no railroad crossing at the end of the road on which the railroad crossing guide is running.

Even if you are guided if there is a railroad crossing nearby

there is. Also, you will be guided at all railroad crossings. ■ Set railroad crossing guidance
It does not mean that. Set whether to guide when there is a railroad crossing in front

!. For the lane guidance dedicated to turning left and right, the straight lane turns right
increase.

Or plan a point to change to a left turn lane It is "ON" at the time of shipment from the factory.

Inside. You will be guided even if you are not in the route guidance
1 .. menu Press,Setting / editing-Function
increase.
settingsTouch
!. In the lane guidance dedicated to turning left and right, you will be guided to the left and right

The direction of the fold does not match the actual shape of the road 2 ..Railroad crossing guidanceTouch
There is a match.
!. If the light is already on, the light
No lighting guidance will be given.

■ Set up toll road caution points and prefectural border information

To determine

When driving on a toll road, guide or set up caution points and prefectural borders

Set.
It is "ON" at the time of shipment from the factory.

1 .. menu Press,Setting / editing-Function

settingsTouch

45 45
 3 ..ONorOFF OFFTouch 2 ..Refresh informationTouch

vegetable

Bi
GeON You will be guided. 3 ..ONorOFF OFFTouch
-OFF OFF I will not be guided.
Shi
Yo
Hmm■ Set the lane guidance for turning left and right
BasicThe straight lane ahead changes to a right turn or left turn lane
BookIf you want to change it, set whether to give guidance.
ManipulationIt is "ON" at the time of shipment from the factory.

Written1..menu Press,Setting / editing-function

SettingTouch
2 ..Right / left turn dedicated lane guidance Tat ON You will be guided.
Chi OFF OFF I will not be guided.

■ Set the light lighting guidance

A plan to encourage the lights to turn on when the sun goes down
Set whether to do inside.
It is "ON" at the time of shipment from the factory.

1 .. menu Press,Setting / editing-Function

settingsTouch
2 ..Light lighting guidanceTouch
3 ..ONorOFF OFFTouch

3 ..ONorOFF OFFTouch
ON You will be guided.
OFF OFF I will not be guided.

■ Set refresh guidance

If you use this machine continuously for 2 hours or more, take a break.
Set whether to provide prompting guidance.
It is "ON" at the time of shipment from the factory.

1 .. menu Press,Setting / editing-Function

settingsTouch
ON You will be guided.
I will not be guided.
46 OFF OFF
 3 ..ONorOFF OFFTouch
When you enter the parking lot
When you enter a large parking lot that contains data, you will see a
parking lot map that shows the number of floors, entrances, exits,
elevator locations, and more.

vegetable

Bi
ON Directions will be displayed at the intersection. Ge
OFF OFF Direction guidance is not displayed. -
Shi
Yo
Note When you drive on a toll road Hmm
Basic
!. The display scale of the parking lot map is 6 m. When you drive on a toll road, it automatically
switches to highway mode (.auto highway mode). Book
Manipulation

Written
When approaching an intersection
When approaching about 300 m before the intersection, the name of the

intersection, lane information, direction guidance, traffic light mark, etc. that pass

depending on the location will be displayed.

Note
!. Some toll roads are not covered by the display.

■ Set auto highway mode

Highway mode automatically when you enter the toll road
■ Set the direction guidance display Set whether to switch to.
Set whether to display the direction signboard when driving on a general road It is "ON" at the time of shipment from the factory.
To do.
It is "ON" at the time of shipment from the factory.
1 .. menuPress,Setting / editing-
Function settingsTouch
Note
!. Displayed only at intersections where data is recorded
2 ..Auto highway modeTat
increase. Chi
1 .. menu Press,Setting / editing-Function
settingsTouch
2 ..Direction guidance displayTouch

47 47
 3 ..ONorOFF OFFTouch 2 ..Bottleneck railroad crossing mark displayTo
touch

vegetable

Bi
GeON Switch to highway mode.
- Switch to highway mode
ShiOFF OFF
3 ..ONorOFF OFFTouch
plug.
Yo
Hmm
BasicBottleneck railroad crossing display
BookOn the 10m-100m scale, "bottleneck treading"
Manipulation"Off" and "Unopened crossing" are displayed as marks.
Written

The mark of the bottleneck railroad crossing is displayed

ON
Will be done.
The mark of the bottleneck railroad crossing is displayed
OFF OFF
It will not be.

Note Info window settings

!. What is a bottleneck railroad crossing? In the information window, you can display the current location

Traffic volume per day x railroad crossing per day information (city name, road name, latitude / longitude), ECO-related

Railroad crossing with a cutoff time of 50,000 units / day or more information, or AV information.

am. The factory default is "city name".

!. A railroad crossing that does not open is a bottleneck railroad crossing. 1 .. menu Press,Setting / editing-Function
The cutoff time per hour peak is 40 minutes.
This is the railroad crossing above.
settingsTouch
!. The crossing that does not open is displayed in a red frame. 2 ..Information window displayTouch

■ Display the bottleneck railroad crossing mark

Set
Whether to display the bottleneck railroad crossing mark on the map
Set.
It is "ON" at the time of shipment from the factory.

1 .. menu Press,Setting / editing-Function

settingsTouch

48
 3 . Touch the information you want to display

vegetable

Bi
Ge
City name
The name of the city, ward, town, or village of your current location is displayed.

increase. -
The name of the road you are currently driving on is displayed. Shi
Road name (If there is no road name, the city / ward / town Yo
The village name is displayed). Hmm
Basic
Book
longitude latitude The latitude and longitude of your current location are displayed.

Selected AV source or song tie Manipulation

AV information Torr, artist name is displayed Written
increase.

Eko vinegarDisplay eco-related information such as fuel efficiency

Thetus Will be done.

■ About eco status

The information displayed in the information window is eco-stator
If you do, the following information will be displayed.

Drive fuel consumption and fuel unit price

Estimated fuel cost
Calculated from and display the amount.
Average fuel economy Displays the average fuel consumption in the past.

Fei Yi
Comparison of cumulative average fuel consumption and latest average fuel consumption

In comparison, whether the fuel economy is good or bad

Kata
It is displayed as a nation.

Note
!. Set not to use air gestures
If yes, the fuel economy indicator is displayed
plug.

49
 6 . Touch the 8-way arrow key to position Five
. Touch the point to erase
And fix itDecisionTouch

Check when you touch the check box

▼ With a mark, you can continue to choose
increase.
The position will be corrected. SortingTouch to sort by date / time, Yomi, or
closest.
6 ..erase-YesTouch
Noboru
RecordDelete registered locations individually
·Not a registered place, such as a closed store
HenYou can erase the data you need.
collection
1 .. menu Press,Setting / editing-Data
editingTouch
2 ..Registered placeTouch

▼
The selected location will be erased.
If the registered locations are not grouped,
The group selection screen is not displayed.
Select allTouch to select all
vinegar.Cancel allTouch to deselect all
selections.
3 ..eraseTouch
Note
!. Delete ungrouped registered locations
WhenNo groupPlease touch
when.
!. Homes are sorted without groups
increase.

Delete all registered locations at once

You can delete all the data in the registered location at once.
Four
. Touch the group name
1 .. menu Press,Setting / editing-Data
editingTouch

110 110
2 ..Registered placeTouch All registered locations are written to the SD card
It will be.

Note
!.cancelTouch to stop exporting.
!. When the registered location data exists in the SD card
Is a table with a message as to whether to overwrite
Will be shown.

Read the location information from the SD card

3 ..Erase all-YesTouch Infiltrate

MapFan.Web.for.Registered location data created with Carrozzeria
and registered locations converted from old model registration
points with the web registration location data conversion tool can
be used as registration points by loading them into this unit via an
Noboru
SD card. increase. Record

Note ·
Hen
!. MapFan.Web.for.Carrozzeria can access the dedicated collection

web page from "MapFan.Web.for.Carrozzeria" in the

navigation studio.
▼ increase. To use MapFan.Web.for.Carrozzeria,
register to use Smart Loop.
All registered locations will be deleted. MapFan member ID registration is required.

Write the location information to the SD card 1 .. menuPress,Setting / editing-Data

You can write all the data of the registered place editingTouch
to the SD card at once. 2 ..Registered placeTouch
1 .. menu Press,Setting / editing-Data
editingTouch
2 ..Registered placeTouch

3 ..Point reading-YesTouch

3 ..Point writing-YesTouch

▼
The registered location data in the SD card is read by this unit.
It will be included.

111
 My setup
You can easily configure the basic settings of this unit by following the instructions on the screen.

3 ..Start my setupTo
Do my setup touch
You can easily make each setting by following the instructions on the
screen.
The items and order that can be set in My Setup
are as follows.
Navigation guidance volume, earpiece volume,

① Volume setting You can set the ringtone volume and operation sound

increase.

Voice guidance and a

② Air Jess
Air Jess in the image video
Char practice mode
You can practice char.
③ Air Jess Air Gesture
Setting Char setting Various settings can be made.
Note
Fixed
④ Home setting You can register or change your home. !. During My Setup settingsto the nextTouch to go to the
Car toll road toll classification and parking next settingForwardTouch to the previous setting
You can set limits, lengths, widths and heights You can move on to the fixed.
increase. !.endTouch to save the settings up to that point
⑤ Fuel cost estimation / car
Fuel economy on general roads and highways and move to the My Setup end screen.
You can set it.
Both information
increase.
Steering remote control settings !. Setting items other than the ETC mounting status setting
I can. can be set individually from the setting menu.
⑥ ETC installation state ETC on-board unit is installed in the car
and set. Set whether it is.
■ Adjusting the volume
Bluetooth compatible mobile phone
⑦ Bluetooth setting
You can register to this machine. 1 .In each item＋or-,ON orOFF OFF
⑧Sending probe information Communication setting for sending probe Touch to adjust
information Set whether or not.
⑨ Smart Loop Smart Loop Trial Registration Trial
Registration I can.

Start my setup
Note
!. Perform my setup during route guidance
Cannot be.

1 ..
Adjust the volume of the navigation voice guidance
menu Press,Setting / editingTo Guidance volume
increase.
touch Set ON / OFF of the operation sound of this unit
Operation sound

2 ..My setupTouch increase.

Earning volume during hands-free calling

Earpiece volume
Adjust.
Ring volume Adjust the ring volume of the phone.

118
 2 ..to the nextTouch 2 ..to the nextTouch

■ Practice of air gesture ■ Home settings

1 ..startTouch 1 ..Home registrationTouch

If your home is already registered,Registration changeBut

2 .Hand on air gesture sensor Displayed and touched to find a place
To bring it closer or to perform a hand gesture operation The search screen is displayed. Looking for a place at home
And practice air gestures Please overwrite. Setting

do 2 Looking for a place,DecisionTouch Fixed

3 ..to the nextTouch

■ Air gesture settings

1 .Set each item

3 ..to the nextTouch

■ Fuel consumption estimation / vehicle information setting

Set the fuel consumption estimation function

Whether to use air gestures
Usage settings
Or set. 1 ..Fuel consumption estimation functionTouch
Feeling of air gesture sensor
Sensitivity setting
Set the degree (high / low).
Behavior when waving and waving
Set the direction. Two types of settings
Hand gesture setting You can do it, and when you bring your hand closer, it will be on the screen

Touch the switch key that appears,

You can switch.
Check WeWhether to display a check window
Window setting Please set.
Outing launcher and check
Display time setting Window display time (long / standard /
Short) is set.
Hand on air gesture sensor
When you bring it closer or after you let go
Sound settings
Set the sound effect when you wave your hand
To do.

119
 2 ..Use fuel economy estimationorDo not use fuel Parameter when not using the fuel consumption estimation function
Tar setting
economy estimationTouch

Note Set vehicle information

!. In order to use eco-related functions, "Fuel efficiency estimation" 1 ..Other. Vehicle informationTouch
Set to "Use fixed". In the following models, the fuel
consumption estimation function works normally.
It may not be. "Do not use fuel economy estimation"
Setting
Please set to.
Fixed
%. Hybrid car
%. Electric vehicles (including fuel cell vehicles)
%. Rotary car
%. Turbo car
%. Diesel Car
%. LPG car
%. Bioethanol car
%. Idling stop car etc. 2 . Set each item andreturnTouch

Set parameters
1 ..Parameter settingTouch

3 ..to the nextTouch

Set the steering remote control

2 . Set each item andreturnTouch In order to use the steering remote control,
Alling remote control adapter (sold separately) or
Alling remote control cable (sold separately) is required.
Parameter setting when using the fuel consumption estimation function When using AVIC-MRZ099W on a Toyota car, the
steering remote control conversion code for Toyota
(Included with AVIC-MRZ099W) is used.

120
1 ..Steering remote control settingsTat 2 ..to the nextTouch
Chi
■ Bluetooth connection settings

1 ..Device registrationTouch

2 ..adapterorToyota / Daihatsu Car

CableorFor Honda cars
cableTouch 2 . Touch the name of the device to be connected

Setting

Fixed

Steering remote control adapter (sold separately) If the device to connect to is not in the list,re-search
When using, regardless of the vehicle manufacturer Please touch. Still in the list
Select "Adapter". Steering remote control If not shown,Register from the other deviceTo
cable (sold separately) or Please touch and register from the Bluetooth
Yota dedicated steering remote control conversion code device. →"Registering a Bluetooth device" on
When using (included with AVIC-MRZ099W), "Toyota / P128
Daiha" according to the vehicle manufacturer ▼
"Cable for Tsu car" or "K for Honda car"
Please select "Bull". A message will appear when connected to the selected device
Will be shown.
3 ..to the nextTouch
3 ..ConfirmationTouch
■ ETC mounting status setting Four
..to the nextTouch
1 ..Attached to the carorNot attached
to the carTouch ■ Probe information transmission settings

1 ..ONorOFF OFFTouch

When set to "Installed in the car", "Smart IC consideration route

search" of the function setting is automatically performed.
It turns on. Also, which setting should be used?
Even if it is, "ETC lane guide table" of function setting
Show is changed to ON.

121
 2 ..to the nextTouch

■ Smart loop trial registration

1 Read the QR code with your mobile phone and
Access the dedicated page and try
Register

Customers can register for a trial of Smart Loop.

Setting
Initial registration of registration and smart loop settings
Fixed
Smart loop for a limited time without doing
You can get traffic information and experience it. (It is necessary to
prepare a communication device separately. Also, packet
Communication and connection charges are the responsibility of the customer

Become. ) Smart loop trial registration is carried

Using the QR code reading function of the band phone
Then, use a mobile phone to send an empty email to the address specified by us.

Send the email and write it in the confirmation email that is returned.

Access the URL listed and you're done.

2 ..to the nextTouch

■ Exit My Setup
1 ..Exit My SetupTo
touch

122
Fuel economy / vehicle settings
Set the information used to calculate the fuel consumption, the vehicle information such as the toll road toll
classification of the vehicle, parking restrictions, length, width, height, and the steering remote control. The
information set here will be reflected in each fuel consumption calculation, eco-index, eco-related functions such
as eco-routes, and toll information for parking lots and toll roads.

Four
..Parameter settingTouch
Use the fuel consumption estimation function to improve fuel consumption

Set
When using eco-related functions, use the fuel consumption estimation function.

please use it.

Note
!. In the following models, the fuel consumption estimation function works normally.

I may not make it. "Use fuel economy estimation

Setting
Please set to "No". →"Setting fuel consumption without
Fixed
using the fuel cost estimation function" on P125
%. Hybrid car Five
..Vehicle weightTouch
%. Electric vehicles (including fuel cell vehicles)
%. Rotary car
%. Turbo car
%. Diesel Car
%. LPG car
%. Bioethanol car
%. Idling stop car etc.

1 .. menu Press,Setting / editing-Fuel

economy / vehicle settingsTouch
2 ..Fuel consumption estimation functionTouch 6 Enter the vehicle weight andEnd of inputTo
touch

3 ..Use fuel economy estimationTouch

You can enter in 1 kg increments in the range of
100 to 9999 kg.

7 ..Total displacementTouch

one two Three

 8 .Enter the total displacement,End of inputTo 12Enter the width andEnd of inputTouch
touch

It can be applied in 1 cm increments in the range of

It can be applied in 0.01 L increments in the range 100 to 999 cm.
of 0.1 to 9.99 L. 13..Parameter correctionTouch
9 ..Vehicle dimensions: height (H)Touch

Setting

Fixed

14.In each item＋or-Touch to set,return

Ten
Enter the height of the vehicle andEnd of Tat
inputTouch Chi

It can be applied in 1 cm increments in the range of

100 to 999 cm.
15..Fuel unit priceTouch
11 11 ..Vehicle dimensions: width (W)Touch

124
16 16 Enter the fuel unit price andEnd of inputTo Four
..Parameter settingTouch
touch

Five
..General road fuel economyTouch
You can enter in 1-yen units in the range of 10 to 999 yen.
increase.

17 17 ..endTouch
Note
!. Parameter correction is the displayed fuel consumption value Setting

Please change when correcting. Fixed

" "For highways and toll roads" is mainly for fuel efficiency during high-speed driving.

The value will be corrected. If you change the value by one step,
The fuel consumption display result changes by about 1%. Value
If you change to the lath (positive) side, the fuel consumption value will be large.
6 Enter the fuel consumption andEnd of inputTo
It will be
touch
!. Parameter correction completes sensor learning
If you do not, you cannot set it. →"Checking the
status of sensor learning" on page 159

Fuel consumption without using the fuel consumption estimation function

To set
1 .. menu Press,Setting / editing-Fuel
economy / vehicle settingsTouch
You can enter in 0.01 km / L increments in the
2 ..Fuel consumption estimation functionTouch range 0.01 to 99.99 km / L.
7 ..Highway / toll road fuel economyTouch

3 ..Do not use fuel economy estimationTouch

125
 8 Enter the fuel consumption andEnd of inputTo 3 ..Toll road toll classificationTouch
touch

Four
. Touch the category you want to set
You can enter in 0.01 km / L increments in the
range 0.01 to 99.99 km / L.
9 ..Fuel unit priceTouch

Setting

Fixed

Five
..Parking restrictions (vehicle type)Touch

Ten
Enter the fuel unit price andEnd of inputTo
touch

6 Select and touch the model,returnTo

touch

You can enter in 1-yen units in the range of 10 to 999 yen.

increase.

11 11 ..endTouch

Set other vehicle information

1 .. menu Press,Setting / editing-Fuel
economy / vehicle settingsTouch
7 ..Parking restrictions (vehicle dimensions)-lengthTo
2 ..Other. Vehicle informationTouch
touch

126
 8 Enter the length andEnd of inputTo 12Enter the height andEnd of inputTo
touch touch

It can be applied in 1 cm increments in the range of It can be applied in 1 cm increments in the range of
100 to 999 cm. 100 to 999 cm.

9 ..Parking restrictions (vehicle dimensions)-widthTo 13..close-endTouch

touch
Set the steering remote control
Setting
To use the steering remote control, you need a
Fixed
steering remote control adapter (sold separately) or a
steering remote control cable (sold separately). When
using AVIC-MRZ099W on a Toyota vehicle, use the
steering remote control conversion code for Toyota
(included with AVIC-MRZ099W).

1 .. menu Press,Setting / editing-Fuel

economy / vehicle settingsTouch
Ten
Enter the width andEnd of inputTouch 2 ..Steering remote control settingsTat
Chi

It can be applied in 1 cm increments in the range of

100 to 999 cm.

11 11 ..Parking restrictions (vehicle dimensions)-heightTo 3 . Touch the item you want to set
touch

Four
..endTouch

127 127
 Communication connection settings
You can use the communication function by registering the communication device connected to this unit and making
various settings. (Some communication functions cannot be used without registration and settings other than
communication connection settings.)

%. Communication charges during line connection and provider connection

Prepare communication equipment The fee will be borne by the customer.

%. Communication is available for about 10 minutes or more while using the communication function.

■ When using a Bluetooth device If not done, the line will automatically disconnect
Please prepare a mobile phone that supports Bluetooth. You increase.
can connect using a mobile phone connection cable, etc. %. Make sure that communication is cut off after communication is completed.
Please note that it cannot be done. please. "Dial lock" on mobile phones
Unlock lock functions such as "auto lock"
nine"
About the corresponding Bluetooth profile Please connect after removing.
This unit supports the following Bluetooth profiles
%. Receive a call during data communication by mobile phone
Settingdoing.
If you trust, data communication is disconnected
% .HFP: (HandsFreeProfile)% .OPP:
Fixed there is. In that case, re-after the call ends
(ObjectPushProfile)% .PBAP:
Please connect.
(PhoneBookAccessProfile)% .DUN:
(DialupNetworkingProfile)% .SPP: %. Bluetooth.Audio by mobile phone
(SirialPortProfile) Data communication may not be possible during use
% .A2DP: (AdvancedAudioDistributionP I have. In such a case, once
rofile) Turn off Bluetooth.Audio, close the music playback software on

% .AVRCP: (Audio / Video.Remote. your mobile phone, and then start data communication.

Control.Profile) Please trust.

%. The smartphones currently on sale are Da
Note
Compatible with Ear Up Network (DUN)
!. Even with a mobile phone that supports Bluetooth, there may be restrictions Most of them haven't done so, in which case
on the connection with this unit depending on the model. Data communication by connecting with bigation
vinegar. For details, please check our website I can't. The one you are using or plan to purchase
<http://carrozzeria.jp/>. Does the martphone support Bluetooth dial-
!. To use Bluetooth.Audio, it is necessary to up network (DUN)?
register the Bluetooth.Audio device in this Please, the manufacturer or the subscriber mobile phone
unit in advance. Please contact the telephone company.

■ When using a communication module Register a Bluetooth device

Optional data communication dedicated communication module "ND-
Note
Please prepare "DC1" and the separately sold USB
connection cable "CD-U120". !. The Bluetooth devices that can be registered areFiveUp to the stand.

!.alreadyFiveIt has been registered as a new platform.

Note
When registering a Bluetooth device, delete
!. Communication costs are 3 counting from the month of the first communication the registered Bluetooth device.
The annual amount is included in the purchase price. 3 years →"Delete registered Bluetooth devices" on
After that, a separate communication contract (charged) procedure is required. P131
It is important. The price of the communication contract (charged) is 10 000

Around the yen / one year is planned. 1 .. menuPress,Setting / editing-System

settingTouch
■ Precautions when using communication equipment

%. Compatible mobile phones, communication modules, etc.

For options, please visit our website.
please confirm.
http://carrozzeria.jp/
%. When the communication connection setting is completed, it depends on the communication function.

Data communication may start automatically.

128 128 I will.
2 ..Bluetooth settingsTouch Five
.Operate this unit or Bluetooth device
And pair

3 ..Device registrationTouch
When registering a Bluetooth device for the first time, a pairing
operation is required to identify the connection partner.
am. The pairing method depends on your
Bluetooth device. This machine or
Pair according to the screen display of the
Bluetooth device.
For details on how to register this unit in a Bluetooth device Setting

(device registration / device authentication), refer to the Fixed

instruction manual of the Bluetooth device.

▼
It will automatically search for nearby Bluetooth devices. The search is A registration completion message will be displayed.
performed for about 20 seconds, and up to 10 devices can be found.

to come. 6 ..ConfirmationTouch
If there is a device for which the Bluetooth function is turned
on after the search is completed,re-searchEven if you touch
You can search again.
Depending on the Bluetooth device you are using, it may not
be found by searching from this unit. On the spot
In that caseRegister from the other deviceTouch to
Register this unit from the registration menu of the
Bluetooth device. For details, see the instruction
manual of the Bluetooth device.
▼
▼
If a Bluetooth device is found, it will be listed.
The following settings can be made continuously according
to the profile of the registered Bluetooth device.
Four
.Tap to the Bluetooth device to register
Chi Provider settings

The following icons are displayed depending on the Set the provider to be used for data communication
type of Bluetooth device. with the registered Bluetooth device.
If you select "NTT-docomo (FOMA packet)" for communication
cell phone connection, NTT. DoCoMo will provide it.
Paid Internet Service Prova
Bluetooth.Audio device Ida "mopera.U" contract is required. For
details, see DoCoMo Information Center
Other equipment Please contact us.
129
 Bluetooth.Audio usage check 2 ..Bluetooth settingsTouch

Select whether to use the Bluetooth.Audio function

with the registered Bluetooth device. 3 ..Device change / deletionTouch
Memory dial read

Setting

Fixed

Four
.Tap to the Bluetooth device to switch
You can read the memory dial of the registered Chi
Bluetooth device into this unit.
▼
A message indicating that the settings have been completed is displayed.

7 ..ConfirmationTouch

Five
. Touch the connection method

Switch Bluetooth device

When multiple Bluetooth devices are registered, it is used for the
hands-free function, memory dial transfer function, dial-up
communication function, and photo-remote @ navigation function.
You can switch between Bluetooth devices. You can also
reconnect if communication with the device is lost for hands free/
Hands-free function and Bluetooth.
some reason. Bluetooth.
Used as an Audio device.
Audio
Note
Bluetooth.As a Bluetooth.Audio device only
!. Can be switched if the selected Bluetooth device Audio To use.
is operating (hands-free / data communication) As a hands-free phone function only
plug. Operate after the operation is completed. hands free
To use.
1 .. menu Press,Setting / editing-System ▼
settingTouch The connection switching is completed.

130
 Note Five
..delete-YesTouch
!. If you set it to hands-free / Bluetooth.Audio, if
you set it to Bluetooth.Audio, if you set it to
hands-free,
Icon is displayed.

Registered Bluetooth device

delete
1 .. menu Press,Setting / editing-System
▼
settingTouch
The registration of the selected Bluetooth device is deleted
2 ..Bluetooth settingsTouch increase.

Change the provider to use

1 .. menu Press,Setting / editing-System Setting

settingTouch Fixed

2 ..Bluetooth settingsTouch

3 ..Device change / deletionTouch

3 ..Change the connection destination provider Tat

Chi

Four
.Tap to the Bluetooth device to delete
Chi

Four
. Touch the provider to connect to

If you select "NTT-docomo (FOMA packet)" for communication

connection, NTT. DoCoMo will provide it.
Paid Internet Service Prova131 131
 Ida "mopera.U" contract is required. For Five
Select the setting items in order and enter the setting contents
details, see DoCoMo Information Center
Please contact us.
Force or choose
▼
The connection destination provider is changed.

Manually select the provider to use

Set
If the desired connection destination is not in the provider
list, or if the provider setting value is changed, set it
manually.
The items and contents that can be set are as follows.
1 .. menu Press,Setting / editing-System item Settings
settingTouch Connection destination name Provider name
2 ..Bluetooth settingsTouch Connection destination
Access point phone number
Story number

Setting Contact issued at the time of joining the provider

ID
Fixed Continued ID

Contact issued at the time of joining the provider

password
Continued password

primary
IP address of the primary DNS
DNS
Secondary
IP address of secondary DNS
DNS
P roxy
"Use", "Do not use"
3 ..Change the connection destination provider Tat server
P roxy server
Chi Proxy. Server name
Bar name

port number Proxy. Server port number

6 ..endTouch
▼
The setting is completed.

Note
!. Enter your password and it will be read by others
It is displayed as "*" so that it does not exist.
Four
..Manual settingTouch !. Enter 3 digits each for the IP address of the primary DNS and
the secondary DNS, and enter a number less than 3 digits.
Please add "0" in front of the number to make it 3
digits.
Example: If 1 9 2 .1 6 8 .2 .2 5 5 is entered, enter
"192.168.002.255".
!. Secondary DNS is instructed by the provider
Please enter only when it is.
If you want to use a! .Proxy server, select Use.

! ""
.Proxy server name ""Port number" setting is
This is possible when "Proxy Server" is set to
"Use". Proxy server name
And the port number, ask the provider you subscribed to.
Please meet.

132 132
!. If you enter "2" etc. directly in the Proxy server 1 .. menu Press,Setting / editing-System
name, enter "2" directly without entering "00"
settingTouch
before the number.
2 ..Bluetooth settingsTouch
Example: If 1 9 2 .1 6 8 .2 .2 5 5 is entered, enter
"192.168.2.255".

Set your own name

You can set your own name for this machine.
The factory default is "Pioneer.Navi".

1 .. menu Press,Setting / editing-System

settingTouch
2 ..Bluetooth settingsTouch 3 ..PasskeyTouch

Setting

Fixed

3 ..Own machine nameTouch Four

Enter the passkey andEnd of inputTo
touch

Four
Enter a name andEnd of inputTo
touch ▼
The passkey will be changed.

Turn on / off radio wave emission

You can set ON / OFF of radio wave emission from this unit. It is "ON" at the

time of shipment from the factory.

1 .. menu Press,Setting / editing-System

settingTouch
2 ..Bluetooth settingsTouch
▼
The name is set.

Change passkey
You can set the passkey for this unit.
The factory default is "1111".

133 133
 3 ..Radio wave emissionTouch 3 . Touch the connection destination

Four
..ONorOFF OFFTouch ****
Connect to the selected provider.
service
Manual
Set the connection destination manually.
Setting

▼
The connection is complete.
Setting

Fixed Note
!.Manual setting If you touch,
As with a Bluetooth device, enter and set the
information of the connection destination. →
ON It emits radio waves.
"Manually set the provider to use" on P132
OFF OFF Does not emit radio waves.

Note
!. When radio wave emission is set to OFF, you cannot
register or change the passkey from this unit.

Set the connection of the communication module

Set the connection destination when communicating using the
communication module. Normally, the separately sold data
communication dedicated communication module "ND-DC1" is
connected, and when the unit recognizes it, it is automatically set. If
you need to change the provider settings manually, perform this
operation.

1 .. menu Press,Setting / editing-System

settingTouch
2 ..Communication module settingsTouch

134 134
Other settings
Set the extended functions of this unit.

illumination
vinegar. At the factory, the color tone is set to "3" and the
brightness is set to "0".

Change color 1 .. menu Press,Setting / editing-System

<AVIC-MRZ099W> setting-Illuminations
You can change the illumination color of the buttons
Ra settingTouch
on the main unit to your liking. You can also adjust 2 .From basic color to color to be set in detail
the tone and brightness of each.
You can choose from a total of 7 basic colors
touch
(white, red, orange, blue, green), rainbow, and eco.
It is "white" at the time of shipment from the
factory.
1 .. menu Press,Setting / editing-System Setting

setting-Illuminations Fixed

Ra settingTouch
2 . Touch the color of your choice
3 ..Advanced SettingTouch

white,Let
Do,Olen
The,blue,Gu
It will be set to the selected color. RainbowandEcoIf is selected,Advanced
Lean SettingCannot be selected.
White → Red → Orange → Bu Four
. Of color＋or-, BrightnessMingor
Lew → Green → White → ... DarkTouch
Rainbow
Repeatedly switch colors in the order of
increase.

Compare past average fuel consumption with latest fuel consumption

Eco And the result of good and bad is illuminated

It is linked to the

Note
!.EcoCan be selected if the fuel consumption estimation function
is not used in "Fuel consumption / vehicle settings".
not. →P125 "Set fuel consumption without using fuel
consumption estimation function" Note
!. Adjust the color tone in 5 steps and the brightness in 3 steps.
Illuminations Can be done.

Set up the details

Set Orbis points
<AVIC-MRZ099W> Orbis (Automatic Speed Camera) You can set the conditions under
Only the basic colors (white, red, orange, blue, which the points are guided.
green) can be fine-tuned. At the time of shipment from the factory, it is "all points".
135
 Note
!. Displayed only when there are Orbis points
increase.
!. Download at Navi Studio and SD card
Orbis live data read via
You can only select if there is one.

1 .. menu Press,Setting / editing-Function

settingsTouch
2 ..Orbis PointTouch

Setting

Fixed

3 . Touch the item you want to set

Orbis Point on all roads

All points
Will be guided.
Orbis Point only while driving on toll roads
Toll road only
Will be guided.
Orbis Point only while driving on general roads
General road only
Will be guided.
Orbis points will be announced
OFF OFF
plug.

136 136
Initialize settings
You can restore the factory settings to the factory settings.
! ""
"Security lock setting" needs to be set (enabled /
Initialize various settings disabled) on the dedicated server.
→ P300 "Set security lock"
1 .. menu Press,Setting / editing-System do"
settingTouch !. For sensor learning, reset operation separately
Please do. →"How to reset the sensor
2 ..Initialize NAVI / AV settings Tat
learning state" on P320
Chi !.Restore to factory defaultTouch to each item
In addition to the initialization of, all the data of the registered place etc.

Can be erased (with security lock setting)

DTV (terrestrial digital TV) settings, sensor learning
except for).

Setting

Fixed

3 . Touch the item you want to initialize

Four
..YesTouch
▼
The selected item will be returned to the factory default state.
You can continue to select other items. The end
If you do,returnI touch.

Note
! ""
Even if "Back camera setting" is initialized, the input setting and
switching polarity of the back camera are initialized.
plug.
! ""
When "Fuel efficiency / vehicle settings" is initialized, all parameters
are initialized and eco-related functions are activated.
You will not be able to use it. Reconstruct if used
Please make a decision. →"Fuel efficiency / vehicle settings"
on P123
! ""
. NAVI linked mobile information (all) ""NAVI cooperation
"Mobile information (email only)" is Photolimo @ Na
If you have connected a mobile phone that supports bi
It shows.
! ""
"Function setting" and "Fuel efficiency / vehicle setting"
can be operated when there is no route in the plan.

137
 Function settings
You can make navigation easier to use by changing the settings according to your needs
and preferences.

Change settings Details of settings

1 .. menu Press,Setting / editing-Function
■ Map display
settingsTouch * Is the factory default setting.

Twin view left screen angle

Set the angle of the left screen when displaying twin view
To do.
Display the left screen in normal view
2D
increase.

Display the left screen in sky view

Setting
3D*
Fixed increase.

2 . Touch the item you want to set Highway side map

Set display of side map in highway mode
To do.
High speed map* A fast map is displayed.
Normal map The normal map is displayed.

Highway mode side map angle

Highway mode side map angle
Set.
Side map in normal view
2D*
It shows.
3 . Touch the settings Side map is a table with sky view
3D
Will be shown.

Auto highway mode

Automatically high view mode when driving on toll roads
Set whether to switch to way mode.
ON* Switch to highway mode.
Switch to highway mode
OFF OFF
plug.

▼ Driver's View Side Map Angle

Driver's view side map angle
You can continue to select and change the setting items.
To set.
Note Side map in normal view
2D*
!.Map display,Route / guidance,Congestion informationIf It shows.
you touch the tab of, each setting item is classified. Side map is a table with sky view
3D
Can be displayed quickly. Will be shown.
!. If you want to finish the settingendTouch
increase. AV side view angle
Set the angle of the side map of AV side view
Set.
Side map in normal view
2D*
It shows.
138
 Side map is a table with sky view Automatic erasure of travel locus
3D
Will be shown. Can be set to automatically erase the travel track
increase.

Silent guide angle Within about 100 m from home (registered)

Set the angle of the silent guide. Turn off the power of this machine at the point of (engine)
Near my home
When you turn off), the running track is automatically set.
The map screen of the silent guide
2D* It will be erased.
It is displayed in normal view.
Turn off the power of this machine (turn off the engine)
The map screen of the silent guide is
3D The running track is automatically deleted.
It is displayed in Kai View.
When the power is off

increase.

OFF OFF* The travel track is not automatically deleted.

City map
50 m or less in the area covered by the city map
Display city map when displayed in kale Logo mark display scale
Set. Scale to display logo mark and peripheral search results
Set.
ON* The city map is displayed.
100 mLogomar on a scale of 100 m or less Below
OFF OFF A normal map is displayed.
kale Is displayed.
2 0 0 mLogomar on a scale of 200 m or lessSetting
Sky city map Below kale Is displayed. Fixed
When the city map is displayed in sky view
5 0 0 mLogomar on a scale of 500 m or less
Set whether to display buildings etc. in 3D.
Below kale Is displayed.
ON*
The building of the city map is displayed three-dimensionally
1 km scaleLogo mark on a scale of 1 km or less
It will be. Below* Is displayed.
The building of the city map is displayed in a plane
OFF OFF
It will be.
Simple display of registered place mark

Set up a scale to easily display the registered place mark

Note
Set.
!. If the city map setting is "OFF", it cannot be
5 0 0 mRegistered place on a scale of 500 m or more
set.
More than kale The mark is displayed briefly.
1 km scaleRegistered land Mar on a scale of 1 km or more More
City map boundary display than Is displayed briefly.
Boundary when leaving the area covered by the city map
2 km scaleRegistered land Mar on a scale of 2 km or more More
Set whether to display the line. than Is displayed briefly.
ON
The boundaries of the city map are displayed I Ching
The registered place mark is not displayed simply.
increase. do not have*

Do not show the boundaries of the city map

OFF OFF*
Switch to the regular map.
Bottleneck railroad crossing mark display
Whether to display the bottleneck railroad crossing mark on the map
Note
Set.
!. If the city map setting is "OFF", it cannot be The mark of the bottleneck railroad crossing is displayed
set. ON*
Will be done.
The mark of the bottleneck railroad crossing is displayed
OFF OFF
Map color switching It will not be.
Set the timing when the map color is switched.

Time interlocking*
The color scheme of the screen is linked to the sunset / sunrise time 2D (normal view) fixed scroll
It will switch. Whether to fix the scroll screen to the normal view
Screen layout by turning on / off the small light To set.
The color will switch.
Illumination interlocking

Normal view of scroll screen

ON
Day color fixed It always stays on the daytime screen. Fix to.
Normal view of scroll screen
OFF OFF*
Travel locus display Do not fix to.
Set whether to display the travel track on the map.
ON* The running track is displayed. Information window display

OFF OFF The travel track is not displayed. Seeds of information to display in the information window of the map screen

Set the kind.

139
 Lou who preferentially uses the ferry route
City name*
The name of the city, ward, town, or village of your current location is displayed.
priority
increase. Will be searched.
The name of the road you are currently driving on is displayed. The route that avoided the ferry route
Avoidance
Road name (If there is no road name, the city / ward / town Will be explored.
The village name is displayed).
longitude latitude The latitude and longitude of your current location are displayed. Learning route search
Selected AV source or song tie Whether to search for a route considering the learned route
AV information Torr, artist name is displayed Can be set.
increase.
ON* Consider the route you have learned.
Workman unit vinegarDisplay eco-related information such as fuel efficiency
OFF OFF Does not consider the route learned.
Thetus Will be done.

Traffic jam consideration route search

Orbis Point If traffic jam information is available, consider that information.
You can set the conditions for guiding Orbis points
You can search the route carefully.
increase.
Obtained by traffic jam information and weather live
Orbis Point on all roads Congestion information / heaven
All points* Congestion forecast according to the weather forecast
Will be guided. Consideration Congestion
The route is searched considering the data
Setting Orbis Point only while driving on toll roads predict*
Fixed Toll road only It will be.
Will be guided. Congestion information / AstringencyConsider traffic jam information and traffic jam prediction data

General road only

Orbis Point only while driving on general roads Delay prediction And the route is searched.
Will be guided. The route considers only traffic jam information
Orbis points will be announced Congestion information only
Will be explored.
OFF OFF
plug. The route is searched without considering each information
Do not consider
Will be searched.
Note
!. Download at Navi Studio and SD card Time regulation consideration route search
Orbis live data read via Route search in consideration of traffic restrictions by date and time
You can only select if there is one. You can set whether to search.
Route considering time regulation information
■ Route / guidance ON*
Will be searched.
* Is the factory default setting. OFF OFF Does not consider time regulation information.

Route search criteria

Smart IC consideration route search
You can preset the criteria for route search.
You can set whether to search the route using the smart IC as the target of
The number of traffic lights is small, and the amount of left and right turns is also large.
the boarding / alighting IC.
Recommendation* A moderately easy route is searched
Finding a route considering smart IC
It will be. ON
Will be searched.
Estimated fuel cost will be lower
Eco priority OFF OFF* Does not consider smart ICs.
The route will be searched.

Main line priority

Routes are searched with priority on arterial roads
Note
Will be done.
!. If you select "Installed in car" in "ETC installation
status setting" in My Setup, the smart IC consideration
Toll road usage conditions
route search setting is automatically set.
When searching for a route, set the usage criteria for toll roads in advance.
It will be "ON".
Can be set.
!. Cannot be set during route guidance.
Toll road is the standard standard for route search
standard*
Will be searched.
Route advisor
A route that avoids toll roads is searched
Avoidance Which information to consider when providing a new candidate route
It will be.
Set whether to do it.
Congestion information and past reroute history
Ferry route usage conditions
Consider everything* Perform auto-reroute in consideration
When searching for a route, the standard for using the ferry route
increase.
Ecklonia can be set.
Auto-rely considering only traffic jam information
Use ferry routes as standard Congestion consideration only
Do the route.
standard*
The route will be searched.
140
 Navigation correction / adjustment
Adjust the navigation volume and adjust the vehicle position.

Navi voice guidance, hands-free calling

Set the volume ＋ Increase the earpiece volume and ringtone volume of

You can adjust the navigation guidance volume, the earpiece volume and ringtone increase.
volume during hands-free operation, and set the operation sound ON / OFF. Navi voice guidance, hands-free calling
- Reduce the earpiece volume and ringtone volume of

increase.
caution

!. Please note that if the operation sound is set to OFF, Five

.Operation soundONorOFF OFFTo
various warning sounds will not sound. touch
1 .. menu Press,Setting / editing-
Adjustment / correctionTouch
2 ..Volume / mute settingsTouch

Key
Arrangement

·
Supplement

ON
Positive
Sounds the operation sound.

OFF OFF Does not make an operation sound.

Note
Central menuSetting / editing-Guidance / hands- !. The volume of the operation sound is the same as each value adjusted in step 4.
free volume settingYou can also operate from. It will be the same.

3 ..Guidance / hands-free volume settingTat

Chi Set mute
When receiving a voice guidance or hands-free call for
navigation, you can temporarily turn down or turn off the
volume of the audio to make it easier to hear the incoming
voice guidance or hands-free call.
The factory defaults are as follows.
Mute timing: "Telephone"
Mute level: "-20 dB"
1 .. menu Press,Setting / editing-
Adjustment / correctionTouch
Four
.Adjust the guidance volume, earpiece volume, and ringtone 2 ..Volume / mute settingsTouch
volume

144
3 ..Mute settingTouch 2 ..Volume / mute settingsTouch

Four
.Select mute timing 3 ..Audio output destination settingTouch

Key
Arrangement

·
Voice guidance and hands-free calling Four
Select the speaker to output Supplement

Guide / phone Turn down the audio volume Positive

increase.

Oh when you receive a hands-free call

phone
Decrease the volume of Dio.
OFF OFF Does not turn down the audio volume.

Five
.Select a mute level

Front L Output from the front left side.

Front L +
Output from the front left and right.
Ronto R
Front R Output from the front right side.

Correct the vehicle position

－ 10 dB The volume will be reduced to 1/3.
If your vehicle is out of position, you can correct it. Be sure to
-20 dB The volume will be 1/10. correct the position of your vehicle while the vehicle is stopped.
MUTE The volume will be 0.
1..menu Press,Setting / editing-Adjustment /
correctionTouch
Set the audio output destination
Set which front speaker outputs voice guidance
2 ..Own vehicle position correctionTouch
for navigation and hands-free call reception
sound.
The factory default is "Front L. + Front R.".
1 .. menu Press,Setting / editing-
Adjustment / correctionTouch

145
Use of various information
You can check various information recorded and stored in this unit.

View detailed eco-status information Check the status of sensor learning

You can see the contents of eco status in detail You can check the current sensor learning status.
increase.
caution
1 .. menuPress,information-Details of !. The passenger must check the driving condition, and the driver
eco-statusTouch Please concentrate on driving.
!. Do not use the speed display instead of the speedometer
Please come. Different from the speedometer of a car
May occur.
!. If you change tires or attach a chain, or
A place where you slipped on a rough road (snowy road, etc.)
In that case, it automatically detects that the outer diameter of the tire has changed.

Put out and relearn the distance learning of the sensor

There is.

1 .. menu Press,information-System
▼
informationTouch Information

2 ..Sensor learning statusTouch

Information

Departure by speed 5 seconds after starting

e-start rate
Advance evaluation is performed and judgment is made.
▼
Except when the vehicle is stopped, the speed change for 1 second

A state of less stable running

Constant speed rate

It is a voice.
The engine is running and the vehicle speed is
low. The state of 0 km / h.
Average fuel of previous operation and this operation
Average fuel economy
The cost is displayed.
Cumulative average (average fuel consumption and cumulative rough for the past 4 times

and this time) The average fuel consumption of is displayed.

■ About the display color of eco status

Compare the results of e-start rate, constant speed rate, idling rate, ■ Trip / pulse count / speed
and average fuel consumption with the previous operation. Trips, pulse counts, and speeds currently recognized by this unit
It is displayed in the display color as shown below. The degree is displayed.
%. Blue: When improved
Note
%. White: If there is no change
!.TriporNumber of pulsesYou can reset the
%. Red: When it gets worse
accumulated numbers by touching.
Also e-start rate, constant speed rate, non-idling
!. Power cord vehicle speed signal input (pink lead)
Comprehensive evaluation that takes into account the rate, and the wallpaper picture is in 3 stages
When the wire) is not connected, a simple hive
It changes with.
Lid mode is set and the number of pulses is calculated.
plug.
159
 !. Even if the power of this unit is turned off (engine is turned off), 2 ..Connection StatusTouch
trips and the number of pulses may be integrated.
I have.
!. The learning level, trip, and pulse count are due to this unit.
It may be cleared due to troubles, repairs, etc.
I will. Also, depending on the condition of this unit, it may
not be accumulated.

■ Sensor learning
The current driving mode (3D hybrid mode,
simple hybrid mode) or "Sensor initial learning" is
displayed. ▼

Note
!.Sensor learningTouch toAll resetWhenDistance
learning resetIs displayed.All resetTouch to
start sensor learning
You can reset everything. ..Distance learning reset
doorTouch to reset only distance learning
to come. Installation position of the navigation body
When the position or angle is changed or mounted on another vehicle

If you replace it,All resetSelect

Information
please. Also, when the distance accuracy is poor
Information
teeth,.Distance learning resetplease choose. Note
→"Sensor learning" of P320 !.<< Previous page,＞＞ Next pageYou can turn
pages with.
■ Front-rear G / Rotation speedometer

The strength of the front and rear G that this machine is currently recognizing is the bar, ■ Vehicle speed pulse
The left and right rotation speeds are displayed with a fan.
The number of vehicle speed pulses currently recognized by this machine is displayed.

Will be done. "0" is displayed when the vehicle is stopped, and "Measurement not
■ Tiltmeter possible" is displayed when the vehicle speed pulse cannot be received.

The vertical tilt (tilt) of this machine with respect to the road is Irasu When you drive a car, it makes a "pip" depending on the speed.
It is expressed in There is a dial tone, and the bar display changes with the numbers.
increase.
■ Distance / Orientation / Tilt (3D) learning degree
The degree of learning results accumulated for the distance, direction ■ Power supply voltage

(rotation in the left-right direction), and inclination is displayed. Power supplied to the unit from the car battery
When the bar reaches the far right, the degree of learning is highest If the voltage is displayed and the power supply voltage cannot be measured

Represents that. "Not measurable" is displayed. It is normal if the engine is in the

range of 11.V to 15.V with the engine running. Since there is an
Note error of about ± 0.5 V at the maximum, this display is a
!. If the tilt (3D) learning level is not displayed, the reference value.
vehicle speed pulse is not counted correctly.
Power cord vehicle speed signal input (pink lead ■ Illuminations
It is possible that the wire) is not connected correctly. Illumination power status is displayed. The car lights
It will be. Check the connection of the vehicle speed signal input When it is lit, "ON" is displayed, and when it is off,
when. "OFF" is displayed.

Check the connection status

■ Back signal
The connection status of the back signal input is displayed. Shi
If it is not displayed correctly, check the connection status by
In the (reverse) position
Set the foot lever to "R"
referring to the installation manual.
The "HIGH" and "LOW" displays are swapped. If the back signal
1 .. menu Press,information-System cannot be detected, "Measurement not possible" is displayed.
Will be done. Shift while pressing the brake pedal
informationTouch
Operate the bar and check that it is displayed correctly
please give me. This connection determines whether the car is moving forward / backward

Is for. Of the lead wire of the back lamp

160
"Voltage when the shift lever is in the reverse position ■ ETC unit
Please connect to the lead wire that changes.
The connection status of the ETC unit (sold separately) is
Note displayed. Be sure to set it up before checking. Positive
"OK" is displayed when the connection is successful, "Not
!. If you do not connect, you cannot detect forward and backward correctly.
connected" when not connected, and the error number is
Because it may happen, the position of your vehicle may shift. displayed when an error occurs.
I will.
!. Always contact when using an optional back camera ■ On-board unit management number
Please continue. If not connected, back turtle
The ETC unit (sold separately) number is displayed.
It does not switch to the video.
If the ETC unit is not connected properly
can not be displayed.
■ Parking brake
The parking brake status is displayed. Par ■ Card expiration date
"ON" is displayed when the king brake is applied, and Inserted into the currently connected ETC unit (sold separately)
"OFF" is displayed when the king brake is released. The expiration date of the card is displayed. ETC unit
It may not be displayed if the device is not connected
■ GPS antenna properly or depending on the ETC unit model.
The connection status of the GPS antenna is displayed. Correct
If it is connected, "OK" is displayed, if it is not connected, "Not ■ Beacon unit
connected" is displayed, and if GPS positioning is not possible, The connection status of the VICS beacon unit (sold separately) is
"Measurement not possible" is displayed. GPS antenna displayed. "OK" is displayed when the connection is correct, and "Not
reception with the antenna illustration displayed on the right connected" is displayed when the connection is not established.
Information
You can check the status. A view that is easy to receive radio waves increase.
If two or more bars are displayed in a nice place Information

It's good. ■ Communication module

The connection status of the communication module is displayed. Correct
■ Positioning status If it is connected, "OK" is displayed, and if it is not
Positioning status (3D positioning, 2D positioning, unpositioned), number connected, "Not connected" is displayed.
of satellites used for measurement (orange), satellites being received
The number (yellow) is displayed. Electricity of 3 or more satellites ■ HUD
When you receive a wave, you can position your current location.
The connection status of the AR.HUD unit (sold separately) is
→"Mechanism of navigation" on P328 displayed. If it is connected correctly, "OK" is displayed, and if it
is not connected, "Not connected" is displayed. However, if the
■ Mounting position AR. HUD unit has never been connected, the item itself will not
The installation status of the navigation unit is displayed. be displayed.
If the installation is correct, "OK" is displayed, and if there is a
problem with the installation status, "Vibration tolerance" or
"Mounting angle tolerance" is displayed. Of the mounting position
Check the SD card information
If the information acquisition fails, the table says "Measurement is not possible".
You can check the contents of the SD card inserted in this
Will be shown. unit.

1 .. menu Press,information-System
■ Bluetooth device 1 · informationTouch
Bluetooth device 2
The connection information (connected device name, Bluetooth
2 ..SD card informationTouch
device address, usage profile name, signal strength *) of the
Bluetooth device (1st / 2nd) registered in this unit is displayed. In
addition, the radio wave condition between the navigation unit and
the Bluetooth device is displayed as an illustration.
*. Indicates the signal strength (link strength) between the
navigation unit and the Bluetooth device. Current location screen
The Bluetooth antenna mark displayed at the bottom
right of the AV source screen is a hands-free connection.
Indicates the reception strength of radio waves from the base station of the

Bluetooth device.
▼

161
 Note
!.Data updateTouch to update the information
downloaded to the SD card.
!. In the inserted SD card after updating the data
If the data update of is completed normally,
* (Asterisk) is displayed after each item
increase.

Used capacity (GB) and free status are displayed ■ Program version (Navigation
increase. Shon)
Note Check the version of the navigation system
to come.
!. The number of songs that can be recorded is displayed in "AVIC-
MRZ099W / MRZ099 "only. ■ Map data
!. This unit has an SD card format function. You can check the version of the map data.
I don't. Use dedicated format software
And format it. Formal
■ Search data
When you do, the data recorded on the SD card
You can check the version of the search data.
Will be erased. Be sure to back the data
Please go up. Format soft
The following homes of the SD Association ■ Program data
Information You can get it from the page. You can check the version of the AR.HUD unit.
https://www.sdcard.org/jp/
Information

■ Collaboration data
You can check the version of the linked data of
Check version information the AR.HUD unit.
You can check the map and software version information
increase.

1 .. menu Press,information-version
informationTouch

162
Basic audio operation
This section describes basic operations such as AV source switching.

3 . Touch your favorite AV source

Switch AV source
Switch sound sources and videos (hereinafter referred to as AV sources) such as

CDs and DVDs.

Factory default to use air gestures

It has become. The operation for switching the AV
source differs depending on whether the air gesture
is used or not, so we will explain each of them.

Note
!. Not connected AV source or ready for playback
It will switch to the AV source that has not been created.
▼
plug.
!. Setting to use / not use air gestures It will switch to the selected AV source.
The fixed value can be changed in the air gesture setting.
Note
vinegar. →"Setting an air gesture" on P16
!. Set the hand gesture of the air gesture setting to "Na"
Switch between bi screen and AV screen "
■ When using air gestures
In that case, the AV menu is displayed by hand gesture operation.
You can also let it. However, it is already an AV saw
Cut the AV source using an air gesture Perform a hand gesture operation with the switch selected
Oh
The operation to change is explained. Then, it switches to the selected AV source screen.
-
De
1 . Air gesture mark is displayed increase.
I
On the screen that is being, Air Jess Oh
Hands close to the char sensor ■ When not using air gestures Basic

AV source without using air gestures Book

Attach Manipulation
This section describes the switching operation.
▼ Written

1 .. menu Press,← AVTouch

A sound will be heard and the outing launcher will be displayed.
increase.
While displaying the AV menu,← AVYou don't
2 ..AV sourceTouch have to touch. again,AV You can also press to
display the AV menu.

▼
The AV menu is displayed. 2 . Touch your favorite AV source

163
 ▼ The touch keys will be hidden. When performing
touch operation, check windowclosePlease click to
It will switch to the selected AV source. close the check window before operating. The
check window disappears if no action is taken
Leave the navigation screen after it is displayed.

Operate the AV source

If you have set to use air gestures, you can switch between the
station you are watching and the song or chapter you are
playing while the navigation screen remains.

1 . Air gesture mark is displayed

On the screen that is being, Air Jess
Hands close to the char sensor
Attach
▼
Turn off the AV source
A sound will be heard and the outing launcher will be displayed.
increase. 1 . Air gesture mark is displayed
Outing run displayed while playing a music CD On the screen that is being, Air Jess
Let's take Char as an example.
Hands close to the char sensor
Attach
▼
Touch to the previous track
Oh Play (song).
A sound will be heard and the outing launcher will be displayed.

-◀ Touch and hold to rewind the song

increase.
De
I
increase. 2 ..AV source-AV.OFFTouch in the
Oh When you touch it, the next track order of
Play (song).
Basic ▶ ..
Book Touch and hold to fast forward the song
Manipulation
increase.

Written
Note
!..◀and▶..Has different functions depending on the AV source
you are watching / playing. The function content is
It will be displayed at the bottom of the key.

!. The display on the right side of the mark says that you touched it for a long time

Indicates the function of the device.

!. Change the broadcasting station being watched / played, or ▼

return files, chapters, etc. depending on the AV source.
AV The source turns off.
You can move forward. AV Press and hold to turn off the AV source
!. AV if you don't use air gestures can also do.
In the menu at the bottom of the source screen,.◀and
▶ ..Please use. Note
!. If you don't use air gestures
menuPress,AV.OFFPlease touch.
To display the check window
about
Check window of air gesture setting When the
window setting is set to "Display", if you bring your
About video AV sources
For video AV sources such as TVs and DVDs, only
hand close to the air gesture sensor, you can go out.
the video display is switched when no air gesture
A check window appears on the right side of the
or touch operation is performed. If you have set
screen with the char. →"Setting an air gesture" on
to use air gestures, you can touch them by
P16
bringing your hand close to his sir. I have set it so
On the navigation screen (current location screen), the status of the
that it does not use air gestures
AV source currently being received / played is displayed. However,
164Navigation information is displayed on the AV source screen
If so, you can perform the touch operation by touching
the video screen once.

Set the clock display on the video screen

Set whether to display the clock when displaying a video
screen such as a DVD.
It is "OFF" at the time of shipment from the factory.

1 .. menu Press,Setting / editing-System

settingTouch
2 ..Other settingsTouch

3 ..Video screen time display setting Tat

Chi
Oh
-
De
I
Oh
Basic
Book
Manipulation

Written

Four
..ONorOFF OFFTouch

ON Displays the time.

OFF OFF Does not display the time.

165
 Listen to the radio
I will explain how to receive the radio.

Note
!. Here, the case of using the air gesture is explained as an example. For the differences in operation
methods that occur with and without using air gestures, see →"Basic audio operation" on P163Please refer
to the.

Receive radio User presets and areas

1 . Air gesture mark is displayed Switch presets
On the screen that is being, Air Jess Select whether to call the broadcasting station (user
preset) registered by the user or the broadcasting station
Hands close to the char sensor
(area preset) near the vehicle position registered in
Attach advance in this unit.
▼
1 . Air gesture mark is displayed
A sound will be heard and the outing launcher will be displayed.
On the screen that is being, Air Jess
increase.
Hands close to the char sensor
2 ..AV sourceTouch Attach
▼ ▼
The AV menu is displayed. A sound will be heard and the outing launcher will be displayed.

Release
3 ..FMorAMTouch increase.

Send ▼ 2 ..AV sourceTouch

Vedanā
Radio AV source screen (Preset Chan ▼
Shin
Nell list) is displayed, and it was received last time. The AV menu is displayed.
Receive a broadcast station.
3 ..FMorAMTouch
Four
The frequency and release you want to receive from the list

Touch the sending station Four

..Preset switchingTouch

Example: FM

▼
With each touch, user presets and d
Even if the stations are listed, the current location
The rear preset is switched.
Depending on the environment and radio wave conditions, reception may not be possible.
In the area preset, the frequency of the broadcasting station changes.
I have.
In the case of further, the following conditions may occur
Radio waves in tunnels, mountains, valleys of buildings, etc.
I have.
In places where it is easily blocked, in areas where radio waves are weak
Broadcasting station cannot receive
May result in poor reception.
The received station and the displayed station name are
Note different

!. If FM stereo transmission is received, Note

[STEREO] is displayed.
!. If you set it as an area preset, your vehicle circumference
Broadcasting stations in the vicinity are displayed in a list, and it is easy to broadcast stations.

You can select.

166
 The AV menu is displayed.
Switch bands 3 ..FMorAMTouch
This unit has two bands for each FM / AM, and
preset memory (P1 to P6) can be used for each Four
..BSMTouch for 2 seconds or more
band.
1 . Air gesture mark is displayed
On the screen that is being, Air Jess
Hands close to the char sensor
Attach
▼
A sound will be heard and the outing launcher will be displayed.
increase.

2 ..AV sourceTouch cancelTouch to cancel the automatic registration

increase.
▼
▼
The AV menu is displayed.
When automatic registration is completed, user preset
3 ..FMorAMTouch The broadcasting station is registered in.

Four
..bandTouch
The number of stations with good reception is less than the number that can be registered.

If not, the place where the previously registered broadcasting station remains

There is a match.

Note
!. Even if you have selected an area preset
BSMTouch to automatically user pre
It will switch to the set. Release

Send
Vedanā

Manually register the station Shin

You can manually register up to 6 stations each for FM1, FM2,
▼ AM1 and AM2 in the user preset.

Each time you touch it, it switches as follows 1 . Air gesture mark is displayed
increase.
On the screen that is being, Air Jess
FM1⇔FM2
AM1⇔AM2 Hands close to the char sensor
Attach
Note
▼
!. I usually use FM1 and AM1 and at my travel destination
A sound will be heard and the outing launcher will be displayed.
Depending on the application, such as using FM2 or AM2
increase.
It is convenient to use them properly.

2 ..AV sourceTouch
▼
Automatically register broadcasting stations
Broadcasting stations with good reception can be automatically The AV menu is displayed.
registered in the user preset.
3 ..FMorAMTouch
1 . Air gesture mark is displayed
Four
..Preset switchingTouch to make it a
On the screen that is being, Air Jess
user preset
Hands close to the char sensor
Attach
▼
A sound will be heard and the outing launcher will be displayed.
increase.

2 ..AV sourceTouch
▼
167
 Five
Touch / to select the frequency you The preset station is switched
want to register
Find a receivable station
When the reception status of FM or AM deteriorates, search
for a station with good reception status and switch.

1 . Air gesture mark is displayed

On the screen that is being, Air Jess
Hands close to the char sensor
Attach
▼

6 .2 seconds in the frame of the preset you want to register A sound will be heard and the outing launcher will be displayed.
increase.
Touch above
2 ..AV sourceTouch
▼
The AV menu is displayed.
3 ..FMorAMTouch
Four
. Touch and hold on or on the outing
launcher
▼
▼ It will switch to a broadcasting station with good reception.

Release
The frequency currently being received is the selected preset frame.
Send To You will be registered.
Vedanā
Or touch for a long time and release your finger to self
Shin Search for a station that can be received dynamically and keep touching

Then, the frequency is sent continuously.

Turn off the preset channel

exchange
Switch preset stations while receiving FM or AM.

Follow the procedure below to switch between

stations set in user presets and area presets.
1 . Air gesture mark is displayed
On the screen that is being, Air Jess
Hands close to the char sensor
Attach
▼
A sound will be heard and the outing launcher will be displayed.
increase.

2 ..AV sourceTouch
▼
The AV menu is displayed.
3 ..FMorAMTouch
Four
. Touch or on the outing launcher

▼
168
Listen to traffic information
Explains how to receive traffic information broadcast on arterial roads.

Note
!. Here, the case of using the air gesture is explained as an example. For the differences in operation
methods that occur with and without using air gestures, see →"Basic audio operation" on P163Please refer
to the.
!. If you adjust the volume while receiving traffic information, you can set it as the volume for traffic information. other
Even if you switch to the AV source and adjust the volume, the next time you receive traffic information, you can listen to it at the
previously set volume.

The AV menu is displayed.

Receive traffic information
3 ..Transportation informationTouch
1 . Air gesture mark is displayed ▼
On the screen that is being, Air Jess
The traffic information screen is displayed, and the week I was listening to last time
Hands close to the char sensor Receives wavenumber traffic information.
Attach
▼
A sound will be heard and the outing launcher will be displayed.
increase.

2 ..AV sourceTouch
▼ Release

The AV menu is displayed. Send

Vedanā

3 ..Transportation informationTouch Shin

▼ Four
. Touch or on the outing launcher

▼
The traffic information screen is displayed, and the week I was listening to last time

Receives wavenumber traffic information.

The frequency will switch.

Switch the frequency of traffic information

Switches the frequency while receiving traffic information.

1 . Air gesture mark is displayed

On the screen that is being, Air Jess
Hands close to the char sensor
Attach
▼
A sound will be heard and the outing launcher will be displayed.
increase.

2 ..AV sourceTouch
▼ 169
 Use SD / USB
Music files (WMA / MP3 / AAC / WAV) in the SD card / USB memory connected to
this unit, video files (MPEG4 / H.264 / WMV) in the SD card, and songs recorded on
the SD card ("AVIC" -This section explains how to play "MRZ099W / MRZ099" only).

caution

!. You can see the image on the monitor when the vehicle is stopped and the parking brake is applied. For your
safety, no video will be displayed on the monitor while driving.

Note
!. This unit supports the following media.
— .SD card: Supports maximum capacity 32 GB, file system FAT.32 / 16, SD memory card standard /
SDHC memory card standard
— .USB memory: maximum capacity 16 GB, file system FAT32 / 16
!. The resolution of the video file in the SD card played on this unit is 720 x 480 * 1/400 x 240. * 2
It is less than. Also, files with too high a bit rate may not be playable on this unit. The upper limit of
the bit rate is as follows.
— .MPEG-4.Video:4 Mbps* 1 /2.5 Mbps* 2
— .H.264 / AVC:2 Mbps* 1 /1.5 Mbps* 2
Me — .WMV. (VC-1):384 kbps* 1 /768 kbps* 2
Mo !. The maximum number of file names (including extensions) and folder names that can be displayed is 260 characters. * 1/258
Li characters. * 2. 260 characters. * 1/258 characters. * Files and folders larger than 2 cannot be played.
- !. When updating map data, if the AV source is MSV / SD, SD, or USB, it is automatically turned off.
Me It will be. After updating the map data, change the AV source to MSV / SD, SD, or USB and restart
De playback.
I
Ah Files with !. DRM (Digital Rights Management) cannot be played.
!. To connect a USB memory, use the separately sold USB connection cable "CD-U120Is required.
!. Here, the case of using the air gesture is explained as an example. For the differences in operation
methods that occur with and without using air gestures, see →"Basic audio operation" on P163Please refer
to the.
* 1 "AVIC-MRZ099W / MRZ099"in the case of.
. *. 2 "AVIC-MRZ077 / MRZ066"in the case of.

Note
Groups, albums, trucks !. My mix is two, group and track
About It consists of a hierarchy of.
In "AVIC-MRZ099W / MRZ099", the SD card
hierarchy consists of three layers: group, album,
and track.
Recorded music or music phi
Play files and video files
■ About group types The operation method is common to SD and USB. Here, SD is used
Groups (first level) fall into two categories. as an example.
Only SD sources are supported for playback of music
and video files recorded with "AVIC-MRZ099W /
Original group MRZ099".
This group contains files copied from a computer
and songs recorded on an SD card with "AVIC- 1 . Air gesture mark is displayed
MRZ099W / MRZ099". On the screen that is being, Air Jess
Hands close to the char sensor
My mix
Attach
A store that stores songs collected according to your preference
It's a loop. ▼

220 220
 Four
..videoorMusicTo touch Operate after displaying the control panel
please.
▼
Fast rewind / fast forward while touching.

Pause playback
Pauses playback.
1 . Air gesture mark is displayed
On the screen that is being, Air Jess
Hands close to the char sensor
Displayed when playing music files, Attach
video Operation of video file when touched ▼
It will switch to the screen.
A sound will be heard and the outing launcher will be displayed.
Displayed when playing a video file, increase.
Music Operate music files by touching
It will switch to the screen. 2 ..AV sourceTouch
▼ ▼
Operation image of video file or music file The AV menu is displayed.
It switches to a surface. 3 ..MSV / SDorSDTouch
Me Note Four
Touch.
Mo !.videoWhenMusicThere are no video or music
Li files on the SD card
- Cannot be selected.
Me
De
IFast rewind / fast forward
Ah
1 . Air gesture mark is displayed
On the screen that is being, Air Jess
Hands close to the char sensor
Attach Air when playing video files on an SD card
Bring your hand in front of the gesture sensor
▼
Operate after displaying the control panel
A sound will be heard and the outing launcher will be displayed. please.
increase. ▼
2 ..AV sourceTouch Pauses during playback. Paused or
▼ Playback resumes while stopped.

The AV menu is displayed.

Stop playback
3 ..MSV / SDorSDTouch Stops playback.
Four
. Or touch This function is valid only when playing video files on an SD
card.

1 . Air gesture mark is displayed

On the screen that is being, Air Jess
Hands close to the char sensor
Attach
▼
A sound will be heard and the outing launcher will be displayed.
increase.

Air when playing video files on an SD card

224 Bring your hand in front of the gesture sensor
 2 ..AV sourceTouch The selected song is registered in My Mix (group)
Will be done.
▼
Note
The AV menu is displayed.
!. You can register up to 999 tracks in My Mix.
3 ..MSV / SDorSDTouch
Four
Touch. !.Add to My MixOnly the SD card that executed the
above can play the songs added to My Mix.
increase.
!. Add songs to My Mix on your computer
If deleted, the deleted song will be skipped on this unit.
And play.

Set wide mode

This function is only compatible with "AVIC-
MRZ099W / MRZ099".
▼ You can select how to enlarge the 4: 3 etc. image to wide
image.
Stops playback. The factory default is "FULL".
This function is valid only when playing video files on an SD

Track to my mix card.

Add (file) caution

Me
This function is only compatible with "AVIC- !. For commercial purposes or for public viewing
As a target, the wide mode switching function of this unit
Mo
MRZ099W / MRZ099".
When you use (FULL, ZOOM, etc. on the screen
Li
This is a way to collect only your favorite songs in My -
Mix (group). (When compressed or stretched), copyright law
Infringes the rights of the author protected above
Me
1 . Air gesture mark is displayed De
Please note that there is a risk.
I
On the screen that is being, Air Jess Ah
Hands close to the char sensor 1 . Air gesture mark is displayed
Attach On the screen that is being, Air Jess
▼ Hands close to the char sensor
Attach
▼
A sound will be heard and the outing launcher will be displayed.
increase.

2 ..AV sourceTouch A sound will be heard and the outing launcher will be displayed.
increase.
▼
2 ..AV sourceTouch
The AV menu is displayed.
▼
3 ..MSV / SDTouch
The AV menu is displayed.
Four
..Add to My MixLong tap 3 ..MSV / SDTouch
Chi
Four
..Wide modeTouch

225
 Five
. Touch the display method of your choice NORMAL
The 4: 3 image is displayed as it is.

Note
▼ !. When viewing images with CINEMA or ZOOM, the image
quality will be rough.
The display method is set.
FULL
Enlarges only the left and right of the 4: 3 image. The wide
Initialize SD
Set the SD playback conditions in advance according to the environment in
screen is displayed without missing the image.
which you will be using it.
Only "AVIC-MRZ099W / MRZ099" can be set. For
recording settings, →"Set recording" on P191
Please refer to.

■ Set the video output

Set the screen size of the SD video output.
Me
Mo JUST It is "full" when shipped from the factory.

Li The closer you are to both ends of the screen, the higher the ratio of lateral extension 1 .. menu Press,Setting / editing-
- I will. The area near the center of the screen is almost the same as a normal image
Settings by sourceTouch
Me Since it is displayed in the same size, it makes the wide screen feel strange.
De You can enjoy it. 2 ..MSV / SD settingsTouch
I
Ah 3 ..Video output settingsTouch

CINEMA
Enlarge the top and bottom at a ratio between FULL and
ZOOM. Suitable for subtitles that appear in the black areas
outside the video.

Four
..fullorFixed aspect ratioTouch

ZOOM
Enlarges only the top and bottom of the 4: 3 image. Suitable
for landscape images such as movies where subtitles are
displayed on top of the image.

Change the aspect ratio and pull up, down, left and right

full Stretch it out and fill the screen

increase.

226
Use iPod
This section explains how to play an iPod connected to this unit.

caution

!. You can see the image on the monitor when the vehicle is stopped and the parking brake is applied. For your
safety, no video will be displayed on the monitor while driving.

Note
!. To connect an iPod, the separately sold USB connection cable "CD-U120" and the USB conversion cable for
iPod "CD-IUV51M" are required.
!. For video features, you need an iPod that supports video.
!. The iPod may be in the STOP state while using it. It is possible to use the iPod functions again even if it is in
the STOP state, but there are some restrictions on the operation.
!. Please update your iPod software to the latest version before use.
For compatible iPods, please see the Carrozzeria homepage (http://pioneer.jp/carrozzeria/).

!. Here, the case of using the air gesture is explained as an example. For the differences in operation
methods that occur with and without using air gestures, see →"Basic audio operation" on P163Please refer
to the.

Play the iPod iPod music and iPod

1 . Air gesture mark is displayed Switch video
On the screen that is being, Air Jess i
1 . Air gesture mark is displayed P
Hands close to the char sensor On the screen that is being, Air Jess o
Attach d
Hands close to the char sensor of
▼
Attach Envoy
A sound will be heard and the outing launcher will be displayed. ▼ Cormorant

increase.
A sound will be heard and the outing launcher will be displayed.
2 ..AV sourceTouch increase.
▼
2 ..AV sourceTouch
The AV menu is displayed. ▼
3 ..iPodTouch The AV menu is displayed.
▼
3 ..iPodTouch
The iPod will play.
Four.. videoorMusicTo touch

When connecting to an iPod, you do not have to perform the above operations.

Playback starts dynamically.

▼
During iPod music playback, it switches to
iPod video list.
235
 Use Bluetooth.Audio
This section describes how to play music data in a Bluetooth Audio device that is wirelessly connected
to this unit. The functions that can be operated and the displayed contents differ depending on the
type and version of the AV profile.

Connection profile Music transmission Music selection operation Special operation Information display

A2DP ○○ × × ×
A2DP + AVRCP.
○○ △ × ×
Ver.1.0
A2DP + AVRCP.
○○ △ △ △
Ver.1.3
A2DP + AVRCP.
○○ △ △ △
Ver.1.4
○: Correspondence △: Depends on the Bluetooth Audio device ×: Not supported

Note
B
!. Even if "○" is displayed in the above table, there are some functions and restrictions that cannot be used depending on the
l
u Bluetooth.Audio device you are using. For details, please check with your dealer.

e !. A2DP (Advanced.Audio.Distribution.Profile) is a professional file for transmitting audio wirelessly.

t
o !. AVRCP (Audio / Video.Remote.Control.Profile) is a profile for selecting songs and displaying
o information.
t !. If you use the hands-free function, communication function, or phonebook transfer function while using Bluetooth.Audio, the
h Bluetooth.Audio function will be temporarily stopped.
A !. Depending on the mobile phone you use, data communication may not be possible while using Bluetooth.Audio. In
u such a case, turn off Bluetooth.Audio once, close the music playback software of the mobile phone, and then
d perform data communication.
i !. Even with A2DP + AVRCP connection, it may not be possible to operate depending on the model, or the operation may differ from the
o
description described in this manual.
of
Envoy
!. Here, the case of using the air gesture is explained as an example. For the differences in operation
Cormorant
methods that occur with and without using air gestures, see →"Basic audio operation" on P163Please refer
to the.

Bluetooth.Audio device registration Play Bluetooth.Audio

To use a Bluetooth.Audio device, you need to register the
Bluetooth.Audio device in this unit in advance. →
1 . Air gesture mark is displayed
"Registering a Bluetooth device" on P128 Bluetooth.Audio On the screen that is being, Air Jess
devices that have been registered and set to "Hands- Hands close to the char sensor
free / Bluetooth.Audio" or "Bluetooth.Audio" will
Attach
automatically switch to this unit when the AV source is
switched to Bluetooth.Audio. It will be connected and
▼
playback will start. A sound will be heard and the outing launcher will be displayed.
increase.
Note
!. Bluetooth.Audio not registered in this unit 2 ..AV sourceTouch
The device cannot be connected. ▼
!. You may not be able to connect while the Bluetooth.Audio
The AV menu is displayed.
device is connected with a different profile.
In that case, disconnect all profiles of the 3 ..Bluetooth.AudioTouch
Bluetooth.Audio device before connecting. ▼
when.
It will automatically connect to your Bluetooth.Audio
device and start playing.

240
 A sound will be heard and the outing launcher will be displayed. Playback will resume.
increase.
Note
2 ..AV sourceTouch
!. For A2DP connection only, etc.
▼ Chikey cannot be selected. In that case,
The AV menu is displayed. Operate on the Bluetooth.Audio device side.

3 ..Bluetooth.AudioTouch
Four
Touch. Bluetooth.Audio device
Connecting
Connect the Bluetooth.Audio device registered in this unit
with an AV program file.

Note
!. To connect a Bluetooth.Audio device, connect
to this unit in advance.
It is necessary to register the Audio device.
→"Registering a Bluetooth device" on P128
B
l ▼ !. Bluetooth.Audio devices may not be able to connect from
u Pauses playback.
the navigation while connected with a different profile
e In that case, disconnect all profiles of the
t Note Bluetooth.Audio device before connecting.
o !. For A2DP connection only, etc.
please.
o !. Bluetooth.Audio to connect to this unit for the first time
Chikey cannot be selected. In that case,
t Operate on the Bluetooth.Audio device side.
For devices, connect from the Bluetooth.Audio
h device side. After the second connection,
A Follow the steps below.
u
dPlay manually 1 . Air gesture mark is displayed
i On the screen that is being, Air Jess
o 1 . Air gesture mark is displayed Hands close to the char sensor
of On the screen that is being, Air Jess Attach
Hands close to the char sensor
Envoy

Cormorant ▼
Attach
▼ A sound will be heard and the outing launcher will be displayed.
increase.
A sound will be heard and the outing launcher will be displayed.
increase.
2 ..AV sourceTouch
▼
2 ..AV sourceTouch
The AV menu is displayed.
▼
The AV menu is displayed.
3 ..Bluetooth.AudioTouch
3 ..Bluetooth.AudioTouch Four
..Connect from the navigationTouch
Four
Touch.

▼
The connection with the Bluetooth.Audio device is
▼
244 complete.
 Note
!. Depending on the Bluetooth.Audio device used, operation on
the device side is required. For details, see your machine.
Please see the instruction manual of the vessel.

!. When the connection is completed, the device that can be connected to the screen

Device name /. Address (AV menu is displayed)

And the connection status is displayed.
!. During connectionDisconnectYou can disconnect the connection by
touching. If you want to reconnectFrom the navigation
connectionI touch.
!. By Bluetooth.Audio device.Connect from the navigation
You may not be able to connect even if you touch
vinegar. In that case, connect from a
Bluetooth.Audio device.

Bluetooth.Audio device
Switch
B
1 . Air gesture mark is displayed l
On the screen that is being, Air Jess u
e
Hands close to the char sensor t
Attach o
▼ o
t
A sound will be heard and the outing launcher will be displayed.
h
increase.
A
2 ..AV sourceTouch u
▼ d
i
The AV menu is displayed. o
of
3 ..Bluetooth.AudioTouch Envoy

Four
..DisconnectTouch Cormorant

Five
When the connection status becomes "Waiting for
connection", disconnect the Bluetooth.Audio device.
exchange
▼
Subsequent operations are →"Switching
Bluetooth devices" on P130Please refer to.

245
 Use AUX (external device)
This section explains how to play an external video device such as a portable player connected to this
unit.

Note
!. An optional cable is required to connect this unit to an external video device. Please prepare the cable according to the
following usage conditions.
— When using both an external video device and an iPod: USB conversion cable for iPod (for AV) "CD-IUV51M" (another

Please prepare for sale).

—. When using only external video equipment: Mini jack extension cable (for AV) "CD-V200ME" (Sold separately)
Please prepare.
— .When connecting RCA video / audio: Video / audio conversion cable “CD-VRM200” (Sold separately)
Please do.
!. Here, the case of using the air gesture is explained as an example. For the differences in operation
methods that occur with and without using air gestures, see →"Basic audio operation" on P163Please refer
to the.

Make AUX settings Play AUX

If you want to use AUX, you need to set AUX in
advance.
1 . Air gesture mark is displayed
It is "OFF" at the time of shipment from the factory. On the screen that is being, Air Jess
1 .. menu Press,Setting / editing- Hands close to the char sensor
Settings by sourceTouch Attach
▼
2 ..AUX setting-Input settingsTouch
A sound will be heard and the outing launcher will be displayed.
increase.

2 ..AV sourceTouch
A ▼
U
X The AV menu is displayed.
of
Envoy 3 ..AUXTouch
Cormorant ▼
The image of the external device is played.

3 ..ONTouch

If you don't use an external deviceOFF OFF Set wide mode

Set to. You can select how to enlarge the 4: 3 etc. image to wide
▼ image.
The factory default is "FULL".
You can use external devices.

246
 Audio settings
With this unit, you can set the audio to your liking.
Note
!. Cannot be set when the AV source is OFF.
!. Various settings cannot be made when there is voice guidance, hands-free call, etc. while the screen in the
audio settings is displayed, or when the attenuator is ON. However, if the mute setting is set to "OFF", you
can make various settings. →"Set mute" on P144
!. Cannot be set while driving.

2 ..Loudness settingTouch
Make audio settings
■ Fader / balance setting
You can adjust the volume balance of front, back, left and right.

1 .. menu Press,Setting / editing-Audio

settingsTouch
2 ..Fader / balance settingTo touch

3 .Settings ONor OFF OFFTo touch

sound

quality

of 3 ..∧,∨,<,＞Touch to adjust the balance of

Setting
front, back, left and right
Fixed
· ON Turn on the loudness setting.
Key Turn off the loudness setting.
OFF OFF
Arrangement
No further settings are required.

Four
.Effect<or＞Touch
▼
The loudness effect becomes LOW with each touch.
Switch to MID or HIGH.

■ Equalizer setting
Check the balance of front, back, left and right at the position of the cursor

I can confirm it.

Five pre-prepared settings (factory)
You can select the equalizer curve from (Curve) and
■ Loudness setting
the setting (Custom) adjusted to your liking.
A feeling of lack of bass and treble when listening at a low volume
The factory default is "FLAT".
To make the sound sharper.
At the time of shipment from the factory, the setting is "OFF" and the Note
loudness effect is "MID".
!. While receiving traffic information, it will be forcibly
1 .. menu Press,Setting / editing-Audio turned "OFF".
settingsTouch !. The set adjustment value is for recording to SD card.
It will not be reflected. <AVIC-MRZ099W /
MRZ099>
248
 1 .. menu Press,Setting / editing-Audio 2 ..Equalizer settingTouch
settingsTouch
2 ..Equalizer settingTouch

3 .The factory curve you want to correct

Select,.Advanced SettingTouch
3 .Preference setting (factory car
Touch b)

Four
Select the frequency to be corrected and
∧,∨Touch to correct the level
SUPE R.Bass has a thick and powerful deep bass
BASS The sound echoes.
Bass and treble are thick and up
POWERFUL The tempo song sounds sharp
increase.

With a natural balance, you won't get tired of listening sound

NATURAL
Plays a pleasant sound. quality

The mid-high range is thick and relaxed

of
VOCAL Setting
Make your vocals stand out.
Fixed
Does not correct the sound. Set Iko 50 Hz, 125 Hz, 315 Hz, 800 Hz,·
Alternately switch with the riser curve Select a frequency from 2 kHz, 5 kHz, 12.5 kHz.Key
FLAT
And check the effect of the equalizer I can. Arrangement

Please use it when. It can be adjusted in the range of ± 6 steps based on ± 0.

SUPER.BASS / POWERFUL / increase.
CUSTOM1, NATURAL / VOCAL / FLAT CUSTOM2
Select frequency / adjust level ■ High-pass filter setting
It will be the set value you made. Sounds with frequencies lower than the selected frequency are subwoofers

It is not output from each speaker other than fur

Correct the equalizer Can be set to
Further the selected factory curve at each frequency The factory setting is "OFF" and the cutoff
You can make fine corrections. frequency is "80 Hz".
The corrected value is registered in CUSTOM1.
1 .. menu Press,Setting / editing-Audio
vinegar. The correction value set by selecting CUSTOM2 is
It will be registered in CUSTOM2. settingsTouch
Note
!. Adjustable when receiving traffic information
plug.

1 .. menu Press,Setting / editing-Audio

settingsTouch 249
 2 ..High pass filter settingTat 3 .Subwoofer outputONor OFF OFF
Chi Touch

3 .Settings ONor OFF OFFTo touch ON Sets the subwoofer output.

Do not set the subwoofer output
OFF OFF
Hmm. No further settings are required.

Four
.PhasenormalorreverseTouch

As much as front / rear speakers

normal
Output in phase.
Opposite to front / rear speakers
reverse
Output in phase.

Five
. Of the cutoff frequency<or＞Touch
ON Set the high pass filter.

OFF OFF
Do not set the high pass filter ▼
Hmm. No further settings are required.
The cutoff frequency increases with each touch
Four
. Of the cutoff frequency<or＞Touch It switches between 50 Hz, 63 Hz, 80 Hz, 100
Hz, 125 Hz.

sound ▼ 6 . Of level＋or-Touch
quality
The cutoff frequency increases with each touch
▼
of It switches between 50 Hz, 63 Hz, 80 Hz, 100
Setting
Subwoofer output level each time you touch
Hz, 125 Hz. Bell switches between -24 dB and +6 dB
Fixed
· I will.
Key■ Subwoofer setting
Note
ArrangementIf you have a subwoofer connected, the subwoofer
You can set the sound output from the fur. !. Some of the sounds output from the subwoofer
At the factory, the subwoofer output is "ON", the Sound output from front / rear speakers
phase is "normal", and the cutoff frequency is "80 Hz". Includes those in the same frequency band as.

1 .. Press,Setting / editing-Audio
Depending on the conditions inside the car, the phases of these sounds may change.
menu
When inverted (interfered), the frequency band cancels out.
settingsTouch It may happen that they will meet each other. This phenomenon
What prevents it is the phase switching of the subwoofer.
2 ..Subwoofer settingsTouch vinegar. After fixing the subwoofer,No
MaruorreverseSelect either one and set it to the
one that makes the bass volume feel louder.
Please.

■ Source level adjuster settings

There is no difference in volume when switching AV sources
As you can see, the difference in volume of each AV source can
be adjusted based on the volume of FM.
The factory default is "0 dB".

250
 Note 2 ..Sound field setting (VSC)Touch
!. Sound with other AV sources based on FM volume
When listening to FM to adjust the amount
Can set the source level adjuster
plug.
!. Registered for each AV source, but with the same settings
The ones that become are as follows.
— .CD / ROM-Audio
— .DVD-Video / DVD-VR
—. AM / Traffic Information

— .SD / USB
3 . Touch the sound field setting of your choice
1 .. menuPress,Setting / editing-Audio
settingsTouch
2 ..Source level adjuster settingsTo
touch

OFF OFF Does not set the sound field effect.

The sound is like listening in front of the performer

MUSI C.Set up a sound field that can be heard from the front
STUDIO Set. When enjoying music software
Suitable for.
3 ..＋or-Touch Emphasizes powerful deep bass and sound effects
DYNAM I C.
To do. Suitable for enjoying movies etc.
THEATER
doing.
ACTOR'S.Listening to dialogue such as dramas and plays
STAGE Emphasizes the midrange for ease. sound

quality
Feeling relaxed in the living room
RELA X.
I will reproduce it. To play BGM etc.
of
LIVING Setting
It is suitable.
Fixed

Four
..positionTouch ·
Key
Arrangement
Note
It can be adjusted in 2 dB increments in the range of -8
dB to +8 dB.

■ Sound field setting (VSC)

You can realistically reproduce your favorite sound field
vinegar. Also, set the listening position according to the boarding position.
I can do it.
It is "OFF" at the time of shipment from the factory.

1 .. menu Press,Setting / editing-Audio

settingsTouch

251
 Five
..LEFT,CENTERorRIGHTTouch Note
!. If the subwoofer setting is "ON", the cutoff
frequency set in the subwoofer setting
The range of a few or less is adjusted. "OFF" place
In that case, the range below 100 Hz is adjusted.
→"Subwoofer setting" of P250

Note
!. RELAX.LIVING, which emphasizes the midrange, has
no effect near the maximum volume.

■ Bus booster setting

Low output from speakers and subwoofers
Set the range enhancement effect.
The factory default is "0".
1 .. menu Press,Setting / editing-Audio
settingsTouch
2 ..Bus booster settingTouch

sound

quality

of
Setting

Fixed
· 3 . Of level＋or-Touch
Key
Arrangement

▼
Each time you touch it, the output of the bus booster
The bell switches between 0 and 6 (0 dB to
+12 dB).

252
Mobile phone (hands-free)
You can make hands-free calls by connecting a mobile phone to this unit via Bluetooth.

caution

!. For safe driving, avoid calling while driving as much as possible. If it is unavoidable to make a call while
driving, check the safety of the surroundings carefully and end the call in a short time.

▼
I'm worried about echo (reverberation)

when
You can answer the phone and the in-call menu is displayed
Will be shown.
Echo is caused by the other party's voice entering the
Note
microphone through the vehicle speaker. Echoes can be
mitigated by keeping the speakers or their voices out of the !. "Tururururu" sound when a call arrives
microphone. He may also experience echoes depending on Will ring once to notify you of an incoming call.
the phone line conditions, the mobile phone used, and the !. Is the ringtone a speaker on some mobile phones?
environment of the other party. May not be output.
!. Matches the phone number registered in the registered location
■ To reduce echo And the name of that point will be displayed.
In some cases, the echo can be reduced by the following methods. !. With the phone number registered in the memory dial
I have. If they match, the name registered with the memory dial
!. Decrease the earpiece volume →P259 "Call The title is displayed (Registration location and memory dial)
Middle menu operation " If the phone numbers are the same, the name of the registered place is shown in the table.

Will be shown).
!. Take a breath and talk to each other
!. One phone number is registered in multiple registered locations
!. Guide audio output from the speaker on the passenger seat side
Yes, or the corresponding data is registered in this machine
Set only →P145 "Audio output pre-installed"
If not, the caller's phone number is displayed
Make a decision "
Will be done.
However, the echo canceller inside the main body of the navigation system
!. Depending on the usage status of the caller ID notification service
Assembling, echo cannot be completely eliminated
The caller's phone number or name is not displayed.
Hmm. Also, if the other party speaks loudly, it will be even more
It will be difficult to hear. !. Data communication and hands-free calling are used at the same time

Regarding the models that can be used, if there is an incoming call

Note during data communication using Bluetooth, the following

!. During a call, the in-call menu is displayed and you receive a call.
It will be a misaligned operation. (Your phone
The operation differs depending on the
You can adjust the volume.
— .Navi is an incoming call operation (data communication is also average)
!. Where some functions are restricted by mobile phones
Can be done) ancestor

There is a match. (For details, please refer to our home page.

— .Navi is an incoming call operation (data communication is possible)
of
Please see the (http://pioneer.jp/carrozzeria/) other
I can't do it until the end of the story)
or our customer support center.
— .Navi is an incoming call operation (data communication is strong)
of
Please contact us) Machine
End of system)
vessel
—. Incoming call cannot be detected by navigation (portable device body)

Receive a call Will ring)

!. You can also answer the call by pressing the button on your mobile phone
When you receive a call, a message is displayed to inform you of the
You can, but you can use your mobile phone for hands-free communication.
incoming call, and the incoming call notification sounds.
You may not be able to talk.
1 .On incoming callCallTouch If you receive a call while using the !. AV source
Bluetooth.Audio, the playback of
Bluetooth.Audio will be suspended.

How to make a call

There are four ways to make a call. You can also
make a call by operating the mobile phone
directly.
!. Enter your phone number
257
 !. Call memory dial 3 . Touch the other party
!. Make a call from the incoming / outgoing call history

!. Call the phone number registered on the map

■ Enter a phone number to make a call

1 .. menu Press,cell phoneTo touch

2 ..Dial dialTouch

Four
..OutgoingTouch

3 Enter your phone number andOutgoingTo

touch Detailed information-OutgoingYou can also make a call by touching
in the order of. Multiple phone numbers are registered
If so, select the number you want to call.
▼
The call is made to the other party.

Note
!. The memory dial is a mobile phone registered in this unit.
It is read for each story. Mobile phone to connect
The memory dial that appears when you switch
▼ The contents of are also switched.
!. How to read the memory dial"Reading the
The call is made to the other party.
memory dial" on P259Please see
when.
■ Call the memory dial and call
ancestor
Talk to
of ■ Make a call from the incoming / outgoing call history

other 1 .. menu Press,cell phoneTo touch Making and receiving calls when the unit is connected to a mobile phone

of You can display the history (including missed calls) and

Machine make a call.
2 ..Memory dialTouch 1 ..
vessel
menu Press,cell phoneTo touch

2 ..Call historyTouch

258
 3 ..Outgoing history,Call register,Missed call
Select to switch the list to the other party
touch

＋,- You can adjust the earpiece volume.

To hang up the phone Hang up the phone.

Turns on / off the hands-free function
hands free
vinegar. When you want to make a call on your mobile phone
ON (OFF)
▼ Turns off.
close Close the busy menu.
The call is made to the other party.

Note
■ Call the phone number registered on the map
!.closeIf you touch to close the busy menu, the upper
Talk to left of the screen Touch to make a call
The phone number is registered in the detailed information of the searched facility.
You can redisplay the middle menu.
If so, you can call that phone number
!. You can also hang up with your mobile phone.
I can do it.
!. If you turn off the hands-free function, you may
1 Looking for a facility,informationTouch not be able to use the mobile phone function.

Read the memory dial

To use the memory dial function, you need to
load the memory dial registered in the mobile
phone into this unit.
1 .. menu Press,cell phoneTo touch

2 ..Edit / EraseTouch
2 ..OutgoingTouch

ancestor

of
other
of
Machine

vessel

3 ..Memory dialTouch
▼
Phone number registered in the detailed information of the facility
The call will be made to.

Operation of the menu during a call

During a call, the in-call menu is automatically displayed, and
you can adjust the earpiece volume, turn hands-free ON / OFF,
and hang up.

259
 Four
..ReadTouch

Note

Five
.Operate your mobile phone and use the memory diagram
!. In case of PBAP connection, overwrite reading automatically
Will be seen. Additional reading is not possible.
Transfer
6 ..ConfirmationTouch Erase the memory dial
▼ You can erase memory dials that you no longer need.
The memory dial will be read into this unit. 1 .. menu Press,cell phoneTo touch
When the reading is completed, additional reading is performed.
A message will be displayed as to whether or not. addition
When reading withYesPlease touch 2 ..Edit / EraseTouch
stomach.NoTouch to return to the memory dial
list screen and make a note of the read data.
Can be used as a redial.

Note
!. Connected when reading memory dial
Memory dial transfer from mobile phone
Operation (Depending on the mobile phone, all cases are changed
Sending, 1 transfer, etc.) is required.
!. For mobile phones that support PBAP connectionRead
Operation on the mobile phone side when you touch
The memory dial is read into this unit without 3 ..Memory dialTouch
vinegar. Automatically transfer all records depending on the mobile phone used (above)

Will be written). Also, depending on the mobile phone you use

The display on the mobile phone side whether to allow access permission

It will be displayed in.

!. Types of information to be saved, number of characters, number of memories
ancestor Depends on the mobile phone.
of !. Depending on the mobile phone you use, the secret of the mobile phone
other
Also read the memory dial registered by the function.
of It is expected.
Machine
!. The mobile phone's own station number is also the same as the memory dial
vessel
It may be read into. Four
..eraseTouch
!. Memory diamond that can be read from one mobile phone
The maximum number of cases is 1000.
!. Up to 5 phone numbers can be saved per item
am.

■ When the memory dial has been read

The memory dial data has already been read into this unit.
If is, the following screen will be displayed.
Overwrite readingorAdditional readingTouch to
select the import method.

260
 Five
. Touch the data you want to erase 3 ..Clear call history,Clear incoming call history,
Clear missed call historyTouch from

The selected data will be marked with a check mark.

You can continue to choose.
Select allTouch to select all Four
. Touch the data you want to erase
vinegar.Cancel allTouch to deselect all
selections.
6 ..erase-YesTouch
▼
The selected data will be erased.

Note
!. The memory dial recorded on this unit is erased.
Will be done. Memory die on the connected mobile phone side
The selected data will be marked with a check mark.
Yar is not erased.
You can continue to choose.
!. Eraseable memory dial is currently in contact with this unit
Select allTouch to select all
Only the ones read from the mobile phone in the future
vinegar.Cancel allTouch to deselect all
vinegar. Erase when switching the connected mobile phone
selections.
The contents of possible memory dials are also switched.
increase. Five
..erase-YesTouch
▼
Clear incoming / outgoing call history The selected data will be erased.
You can clear outgoing call history, incoming call history, and missed call history
Note
information.

1 ..
!. Delete only the incoming / outgoing call history of the currently connected mobile phone
menu Press,cell phoneTo touch I can do it.
!. If the mobile phone registration is deleted, carry it with you

2 ..Edit / EraseTouch The history of incoming and outgoing calls when using a band phone is also automatic. ancestor

Will be deleted. of
other
of
Machine

vessel

261
Translated from Japanese to English - www.onlinedoctranslator.com

General-purpose back camera

You can connect an optional general-purpose back camera unit "ND-BC7" to this unit to display
images behind the car.

caution

!. Setting involves moving or stopping the car. Please pay close attention to the safety of the surrounding area and traffic regulations.

The input of the back camera is set.

Set the back camera
With a general-purpose back camera, you can perform back camera input, ■ Set the polarity of the back camera
back camera switching polarity, back camera image quality adjustment, It is "HIGH" at the time of shipment from the factory.
parking assist line display settings, and parking assist line adjustment.
1 .. menu Press,Setting / editing-System
■ Set the input settings for the back camera settingTouch
It is "OFF" at the time of shipment from the factory.
2 ..Back camera settingsTouch
1 .. menuPress,Setting / editing-System
settingTouch
2 ..Back camera settingsTouch

3 ..Back camera switching polarity Tat

Chi

3 ..Back camera inputTouch

ancestor

of
other

Four
..LOWorHIGHTouch of
Machine

vessel

Four
..ONorOFF OFFTouch

Switch the shift lever to the back

At that time, the "Bad" on the connection status screen

LOW Cars whose "traffic light" is displayed LOW

ON Displays the back camera image. In both cases, select this.
OFF OFF Does not display the back camera image. →"Checking the connection status" on P160
▼ 269
 Switch the shift lever to the back OFF OFF The parking assist line is not displayed.
At that time, the "Bad" on the connection status screen
▼
HIGH The display of "traffic light" becomes HIGH
Select this for vehicles. The display of the parking assist line is set.
→"Checking the connection status" on P160
▼ Adjust the parking assist line
The switching polarity of the back camera is set. Note
!. Please set the parking assist line display to
Set parking assist line display "ON" in advance. →"Setting the parking cyst
It is "OFF" at the time of shipment from the factory. line display" on P270
Note !. Parking assis depending on the mounting position of the back camera

The line may not fit in the navigation screen

!. Back camera input is not "ON" increase.
And cannot be set. →"Setting the input of the
back camera" on P269 1 .Vehicle width + approx. 25 cm on both
!. Parking assis depending on the mounting position of the back camera sides, + approx. 50 cm and + approx.
The line may not fit in the navigation screen
Eyes at 2 m with gum tape etc.
increase.
Mark
1 .. menuPress,Setting / editing-System About 2m

settingTouch About 50 cm

2 ..Back camera settingsTouch About 25 cm

Marks

Marks

About 25 cm

Rear end of vehicle

2 .. menu Press,Setting / editing-System

settingTouch
3 ..Parking assist line displayTouch 3 ..Back camera settingsTouch

ancestor

of
other
of
Machine

vessel

Four
..ONorOFF OFFTouch Four
..Back camera adjustmentTouch

ON Displays the parking assist line.

270
 Five
..ConfirmationTouch

When you switch the shift lever to another gear, the image
The surface display switches to the original display.

6 Select the cursor position and point Note

To adjust !. In order for the back camera to operate normally
It is necessary to connect the back signal input line. connection
For the method, see "Installation Manual".
when.
!. Detailed usage of general-purpose back camera
Please refer to the "Instruction Manual" for the back
camera.
!. While displaying the image of the back cameramenu or
current location orAV Press to cancel the back-up
camera image.
!. Shiftless immediately after activating navigation
Point position returns to factory default When you put the bar in R (reverse), the camera image
initial value
I will. Only the statue is displayed, and the parking assist line is displayed.
Save the settings and return to the screen in step 4 "Please check the area around the vehicle directly."
Setting completed
I will. Sage is not displayed. These displays and
Discard the settings and return to the screen in step 4. The message is displayed on the camera image with a slight delay
return
I will. Will be done. Vehicle even before the message is displayed

The adjustment result of the current cursor position Please check the surrounding area directly.

Save and red (L) ⇔ red (R) ⇔ green (L) ⇔

▲/ /▼
Change the cursor position in the order of green (R)

increase.
Adjust the image quality of the back camera
The point at the selected cursor position Note
↑/ /↓/ /←/ /→
Move it up / down / left / right.
!. Cannot be operated while driving. Also, while setting the cameramenu

Note You can also adjust the image quality by pressing and holding
plug. ancestor

!. The range projected by the back camera is the back camera of

It depends on the mounting position and orientation of the la. 1 .. menu Press,Setting / editing-System other
vinegar. Therefore, one point is on the navigation screen.
settingTouch of
Located at the end, the description of the instruction manual on the navigation screen Machine

When the point cannot be adjusted at the position as shown 2 ..Back camera settingsTouch vessel
there is. Car back camera as much as possible
Install it near the center of both sides and not too low.
Please.

Display back camera image

When the shift lever is set to the reverse (R) position, the image
switches to the rear of the vehicle. It is convenient to display it when
you retreat in the parking lot.

1 .Reverse shift lever (R)

To
▼
The image from the back camera is displayed.
271
 3 ..Back camera image quality adjustment Tat
Chi

Four
.Set each item

Touch (white) to make it lighter

Blackness Touch (black) to make it darker
increase.

LowTouch to make a small difference between black and white

contrast Get rid ofHighTouch to make a black and white difference

Will be larger.
DarkTouch to darken andMing
Brightness
Touch to make it brighter.
Touch (red) for a stronger warm color
Color temperature It gets cold, and when you touch (blue), it gets cold.

The color system becomes stronger.

LightTouch to make it lighterDark

Color intensity
Touch to darken it.
Touch (red) to make red stronger
of Tint
ancestor
If you touch (green), the green will be stronger.
It will be
other
of
Note
Machine

vessel !. Automatically switches between day () and night () settings in

conjunction with the car lights.
! ""
"Color temperature" is displayed on the monitor of this unit for
reasons such as deterioration of the LED backlight over time.
When there is an error between the color of the image and the actual image

Adjust to such as.

! ""
The settings for "Blackness", "Contrast", and
"Brightness" can be registered separately for day
() and night ().

272