BISON 340

JAW CRUSHER
TECHNICAL
SPECIFICATION
 TECHNICAL
SPECIFICATION
OVERVIEW
1 2 3 4

HOPPER/FEEDER ENGINE OPTIONS JAW CRUSHER CONVEYORS

 5m3 (6.5yd3) Hopper capacity  Tier 3/Stage 3A:  Chamber Size: 1000mm x  900mm (35”) Wide product conveyor
 Vibrating Pan and grizzly feeder John Deere 6068 212 kW (284hp) 600mm (39”x23.6”)  Product conveyor discharge height:
 Tier 4F/Stage V:  Min CSS: 40mm (1.5”)* 3.5m (11’5”)
CAT C7.1 205kW (275hp)  Max CSS: 125mm (5")*
5

CONTROL SYSTEM
 Simple intuitive
operation
3
1

280
UP TO

TONNES PER HOUR

(308 US TPH)
* Depending on application

EVOQUIP BISON 340 2

 TECHNICAL
SPECIFICATION

The EvoQuip Bison 340 is a high performance primary jaw crushing plant and is designed for operators in quarrying, demolition, recycling
OVERVIEW
& mining applications.
User benefits include track mobility for a quick set-up time, hydraulic crusher setting adjustment for total control of product size & crusher
overload protection to prevent damage by un-crushable objects.

FEATURES & BENEFITS

• Output potential up to 280tph (308 US tph) (Depending on • Excellent under crusher access for removal of wire with hydraulic
application & CSS) raise/lower product conveyor (Optional)
• Hydrostatic Drive with reverse crush capacity • Low fuel consumption due to efficient drive system and low
engine RPM
• Heavy duty wear resistant feed hopper
• Easily accessed power unit canopy
• Stepped self-cleaning grizzly feeder with under feeder screen
• PLC control system with auto start facility
• Wide bypass chute to optimise material flow
• Remote control via umbilical
• Aggressive crushing action with high swing jaw encouraging
material entry into crushing chamber • Dust suppression system
• Fully hydraulic crusher setting adjustment • EvoQuip T-Link telemetry as standard
• Improved manganese liner retention, protects jaw supports on • Radio remote control as standard
both swing & fixed jaws

EVOQUIP BISON 340 3

 TECHNICAL
SPECIFICATION

Crusher type: Single toggle Jaw with hydraulic setting adjustment

JAW CRUSHER
Feed opening: 1000mm x 600mm (39” x 24”)
Bearings: Self aligning spherical roller
Lubrication: Grease
Drive: V belts with screw adjust tensioner
Pre-set: 75mm (3”) closed side setting (CSS)
Minimum setting: 40mm (1.5”) CSS recycling
50 mm (2”) CSS quarry
All setting measured from root to tip & subject to suitability of feed
material. This plant has been designed for both quarry & recycling CHAMBER FEATURES
applications where appropriate. For maximum material strength of 390kN
• Hydrostatic with full reverse crush capability
10% Fines, 240MPa compressive strength. If in doubt please contact your
dealer or EvoQuip. • Quick & easy setting adjustment
• Drawback rod hydraulic adjustments not
Maximum setting: 125mm (5”) CSS standard jaws (HA) required during setting changes
Hydraulic adjustment: Hydraulically adjusted C.S.S using wedge • Cartridge type bearings
system. • Overlap jaw protects tip of jawstock
• One piece fixed jaw support
• Proven manganese liner retention

EVOQUIP BISON 340 4

 TECHNICAL
SPECIFICATION

Hopper type: Fixed hopper as standard

HOPPER
Hopper length: 4.46m (14’ 8”)
Hopper width: 2.05m (6’ 8”) standard
2.8m (9’ 2”) with extensions
Hopper capacity: 5m3 (6.5 cu. yd.) / 8m3 (10.4 cu. yd.)
Hopper body: 8mm abrasion resistant feed hopper

EVOQUIP BISON 340 5

 TECHNICAL
SPECIFICATION

Type: Spring mounted vibrating pan & grizzly feeder CHUTE FEATURES
VIBRATING GRIZZLY FEEDER

Vibrating Unit: Twin heavy-duty cast eccentric shafts running in

Heavy duty fully welded inlet chute with wear
spherical roller bearings, gear coupled at drive end
resistant liner plates.
Drive: Flange mounted hydraulic motor
Bypass chute with selectable dischare flop gate, to
Length: 3.75m (12’ 3’’) either bypass conveyor or product conveyor
Width: 0.94m (3’)
Grizzly: 2 replaceable stepped cartridge type grizzlies 50mm
nominal aperture, self cleaning
Grizzly length: 1.89m (6’ 2”)
Under-screen: 30mm mesh fitted as standard

EVOQUIP BISON 340 6

 TECHNICAL
SPECIFICATION

Conveyor type: Troughed belt conveyor DUST SUPPRESSION SYSTEM

PRODUCT CONVEYOR
Design: Fixed frame at horns to allow for transport.
Fully removable modular unit to aid access & Sprays bars with atomiser nozzles mounted over crusher
maintenance mouth. Piped to an inlet manifold for client’s pressured
Belt type: EP500/3 with 8mm top & 2mm bottom cover, water supply
vulcanised
Belt width: 900mm (36”) Type: Clean water multi-atomising nozzles
Discharge height: 3.5m (11' 5") Inlet: Single filtered inlet point on chassis
Stockpile volume: 60m3 (78 cu. yd.) Pressure: 2.8 bar (42 psi)
Drive: Direct drive hydraulic motor Frost protection: Via system drain valves
Tunnel: Conveyor fitted with tunnel & side covers to Pump: Optional extra
minimise rebar snagging
Feedboot: Mild steel plate with abrasion resistant steel liners
at feed point
Belt adjustment: Screw adjusters at head drum
Belt scraper: SCS style
Lubrication: Remote head drum grease points located on
conveyor tail section
Skirting: Wear resistant rubber skirts fitted up to magnet

EVOQUIP BISON 340 7

 TECHNICAL
SPECIFICATION

Tier 3 Equivalent: John Deere 6068, 212kW (284hp) Tier 4F/Stage V: Caterpillar C7.1, 205kW (275hp)
POWER UNIT
Operating Ambient temp. +30°C & –5°C (86F & 23F) Operating Ambient temp. +30°C & –5°C (86F & 23F)
conditions: altitudes up to 2000m (6562ft) above sea conditions: altitudes up to 2000m (6562ft) above sea
level - For applications outside this range level - For applications outside this range
please consult with EvoQuip as the plant please consult with EvoQuip as the plant
performance / reliability may be affected. performance / reliability may be affected.
Operating rpm range: 1500 or 1800 rpm Operating rpm range: 1500-1800 rpm
Plant drive: Hydrostatic Plant drive: Hydrostatic
Fuel tank capacity: 640 L (169 US GAL) Fuel tank capacity: 640 L (169 US GAL)
Hydraulic tank capacity: 600 L (159 US GAL) Hydraulic tank capacity: 600 L (159 US GAL)
Urea tank capacity: 60L (16 US GAL)

Tier 4F/Stage V: Caterpillar C7.1, 205kW (275hp)

Note: Telemetry available as standard

EVOQUIP BISON 340 8

 TECHNICAL
SPECIFICATION

Type: Heavy-duty tracks

TRACKS
Sprocket centers: 3.24m (10’8’’)
Track width: 400 mm (1’ 4”)
Climbing grade: 30˚ maximum
Max Speed: 1kph (0.63mph)
Drive: Hydraulic motors
Tensioning: Hydraulic adjuster, grease tensioner

EVOQUIP BISON 340 9

 TECHNICAL
SPECIFICATION

OPTIONS
BYPASS CONVEYOR MAGNET
Conveyor type: Troughed, modular with hydraulic raise & Options: CP020 single pole (S.P.)
lower. TP020 twin pole (T.P.)
Folds hydraulically for transport Belt width: 750mm (2’ 6”)
Width: 650mm (26”)
Centres: 1700mm (5’ 7”)
Discharge height: 2.1m (6’ 10”)
Drive / Control: Direct drive hydraulic motor,
Stockpile capacity: 12m3 (15.7 cu.yd.) pre-set variable speed
Position: Discharge on RHS or LHS of plant Discharge: RHS via stainless shedder plate
Weight: S.P. 1000kg (2204lbs)
T.P. 1500kg (3306lbs)
BELT WEIGHER
Type: Modular scale with stainless load cells,
single idler speed wheel & display unit FEEDER UNDER SCREEN MESH
Accuracy: + 1.0 + 0.5% Position: Optional aperture meshes fitted in lieu of the
Rolescale design standard 30mm (1.2’’) mesh.
Display: Separate read out near control panel Width: 910mm (3’)
When selected will automaticaly connect to EvoQuip Telematics Length: 1280mm (4’ 2”)

EVOQUIP BISON 340 10

 TECHNICAL
SPECIFICATION

OPTIONS
Control Panel Positive Pressurisation Hot/Cold Climate Oils
An additional unit designed to reduce dust particles within the Cold climate oils - (Recommended for ambient temperatures
control panel. A continuous flow of clean air is passed through the between -20 to +30ºC) - Hydraulic & lubrication oils only. Other
cabinet whilst the unit simultaneously filters out any particulate component modifications may be required for low temperature
laden air. operations. Please contact the EvoQuip sales & applications
department with any queries.
Electric Water Pump Hot climate oils - (Recommended for ambient temperatures
An electrically powered water pump is available to power the dust between +15 to +50ºC)
suppression system.

Under Crusher Deflector Plate

A hydraulic adjustable deflector plate, increases belt protection
in recycling applications. Situated immediately below the crusher
outlet point & is fitted with a 15mm thick wear resistant plate.
Deflector plate working angle can be adjusted from the PLC
control system.

EVOQUIP BISON 340 11

 TECHNICAL
SPECIFICATION

OPTIONS
• Hydraulic Folding Hopper • Stockpiler drive
• Deflector plate under crusher • Stockpile level sensor
• Bypass conveyor • Hydraulic Raise/Lower Product Conveyor
• Single pole overband magnetic separator • Working lights
• Jaw level sensor • Dust covers on discharge conveyor
• Twin pole overband magnetic separator • Rip stop belt
• Belt weigher • Magnet hydraulic raise/lower
• Electric water pump • Remote feeder control station

EVOQUIP BISON 340 12

 TECHNICAL
SPECIFICATION

WORKING
WEIGHTS & DIMENSIONS

Length: 15.54m (51’)

Width: 3.4m (11’ 11’’)
Height: 4.6m (15’ 1”) with bypass conveyor
Weight: 34,860kg (76,853lbs)
including single pole magnet, hopper extensions
& bypass conveyor

EVOQUIP BISON 340 13

 TECHNICAL
SPECIFICATION

TRANSPORT
WEIGHTS & DIMENSIONS

Length: 15.7m (51’ 6”)

Width: 2.6m (8’ 9”)
Height: 3.4m (11’ 2”)

EVOQUIP BISON 340 14

200 Coalisland Road,
Dungannon, Co. Tyrone, BT71 4DR
Tel: +44 28 8771 8500
Email: [email protected] The material in this document is for information only and is subject to
change without notice.
Terex assumes no liability resulting from errors or omissions in this
document, or from the use of the information contained herein.
Due to continual product development we reserve the right to change
specifications without notice.
Photographs are for illustrative purposes only, some or all of the

terex.com/EvoQuip machines in the illustrations may be fitted with optional extras.

Copyright 2022 Terex GB Limited. Published in October 2022.