LOAD CHARTS

RT890E

METRIC
85% STABILITY

235382
SERIAL NUMBER

RT890E - S/N 235382 1

RT890E - S/N 235382 2
 TABLE OF CONTENTS

GENERAL NOTES ...........................................................................................................4

LINE PULLS & REEVING INFO .......................................................................................5
WEIGHT REDUCTIONS / HOIST DATA ..........................................................................6
LIFTING AREA DIAGRAMS .............................................................................................7
RANGE DIAGRAM ...........................................................................................................8
BOOM SECTION EXTENSION PERCENTAGES FOR MODE A & B .............................9

MODE A
ON OUTRIGGERS 100% EXTENDED .................................................................... 11
ON OUTRIGGERS 50% EXTENDED ......................................................................12
ON OUTRIGGERS 0% EXTENDED (fully retracted) ...............................................13
ON RUBBER ...................................................................................................... 14-15

MODE B
ON OUTRIGGERS 100% EXTENDED
MAIN BOOM ........................................................................................................16
EXTENSION ........................................................................................................17

ON OUTRIGGERS 50% EXTENDED

MAIN BOOM ........................................................................................................18
EXTENSION ........................................................................................................19

ON OUTRIGGERS 0% EXTENDED
MAIN BOOM ........................................................................................................20

TIRE INFLATION CHART ..............................................................................................21

RT890E - S/N 235382 3

 NOTES FOR LIFTING CAPACITIES
GENERAL:
1. Rated loads as shown on lift chart pertain to this machine as originally manufactured and equipped. Modifications to the machine or use
of optional equipment other than that specified can result in a reduction of capacity.
2. Construction equipment can be hazardous if improperly operated or maintained. Operation and maintenance of this machine shall be in
compliance with the information in the Operator’s and Safety Handbook, Service Manual, and Parts Manual supplied with this machine.
If these manuals are missing, order replacements from the manufacturer through the distributor.
3. The operator and other personnel associated with machine shall fully acquaint themselves with the latest American National Safety
Standards (ASME/ANSI) for cranes.
SETUP:
1. The machine shall be level and on a firm supporting surface. Depending on the nature of the supporting surface, it may be necessary
to have structural supports under the outrigger floats or tires to spread the load to a larger bearing surface.
2. For outrigger operation, all outriggers shall be properly extended with tires raised free of crane weight before operating the boom or
lifting loads.
3. When machine is equipped with center front stabilizer, the front stabilizer shall be set in accordance with instructions in Operator's &
Safety Handbook.
4. When equipped with removable and/or extendible counterweight, the proper counterweight shall be installed and fully extended before
and during operation.
5. Tires shall be inflated to the recommended pressure before lifting on rubber.
6. With certain boom and hoist tackle combinations, maximum capacities may not be obtainable with standard cable lengths.
7. Unless approved by the crane manufacturer, do not travel with boom extension or jib erected. Refer to Operator's and Safety Handbook
for job-site travel information.
OPERATION:
1. Rated loads at rated radius shall not be exceeded. Do not attempt to tip the machine to determine allowable loads. For clamshell,
grapple, magnet or concrete bucket operation, weight of component and load must not exceed 80% of rated lifting capacities.
2. All rated loads have been tested to and meet the requirements of SAE J1063 - Cantilevered Boom Crane Structures - Method of Test,
and do not exceed 85% of the tipping load on outriggers fully extended. Capacities on outriggers 50% extended and 0% extended (fully
retracted) correspond to DIN 15019 Part 2 (Test Load = 1.25P + 0.1A). 0.1A represents one-tenth (0.10) of the total boom weight
reduced to the boom point.
3. Rated loads include the weight of hookblock, slings and auxiliary lifting devices and their weights shall be subtracted from the listed
rating to obtain the net load to be lifted. When more than the minimum required parts of line needed to pick the load are used, the
additional rope weight as measured from the lower sheaves of the the main boom nose shall be considered part of the load to be lifted.
When both the hook block and headache ball are reeved, the lifting device that is NOT in use, including the line as measured from the
lower sheave(s) of the nose supporting the unused device shall be considered part of the load.
4. Load ratings are based on freely suspended loads. No attempt shall be made to move a load horizontally on the ground in any direction.
5. The maximum in-service wind speed is 32 km/h. It is recommended when wind velocity is above 32 km/h, rated loads and boom lengths
shall be appropriately reduced. For machines not in-service, the main boom should be retracted and lowered with swing brake set in
wind velocities over 48 km/h.
6. Rated loads are for lift crane service only.
7. Do not operate at a radius or boom length where capacities are not listed. At these positions, the machine may overturn without any
load on the hook.
8. The maximum load which can be telescoped is not definable because of variations in loadings and crane maintenance, but it is safe to
attempt retraction and extension of the boom within the limits of the capacity chart.
9. When the boom length or lift radius or both are between values listed, the smallest load shown at either the next larger radius or next
longer or shorter boom length shall be used.
10. For safe operation, the user shall make due allowances for his particular job conditions, such as: soft or uneven ground, out of level
conditions, high winds, side loads, pendulum action, jerking or sudden stopping of loads, experience of personnel, two machine
(tandem) lifts, traveling with loads, electric wires, obstacles, hazardous conditions, etc. Side pull on boom or jib is extremely dangerous.
11. Regardless of counterweight and outrigger spread configuration, no deduct is required from the main boom charts for a stowed boom
extension.
12. Never handle personnel with this machine unless the requirements of the applicable national, state, and local regulations and safety
codes are met.
13. Keep load handling devices a minimum of 107 cm below boom head at all times.
14. The boom angle before loading should be greater than the loaded boom angle to account for deflection.
15. Capacities appearing above the bold line are based on structural strength and tipping should not be relied upon as a capacity limitation.
16. Capacities for the 11.4 m boom length shall be lifted with boom fully retracted. If boom is not fully retracted, capacities shall not exceed
those shown for the 15.4 m boom length.
17. When operating in the "On Outriggers 50% Extended (5.3 m spread)" mode, the outrigger beam pins must be engaged. When
operating in the "On Outriggers 0% Extended (3.15 m spread)" mode, the outrigger beams must be fully retracted. Failure to follow
these precautions could result in structural damage or loss of stability of the machine.
18. Do not lift loads when boom is fully lowered. The Rated Capacity Limiter (RCL) senses pressure and will not provide warnings or
lockout. The crane can become overloaded if lift cylinder(s) is fully retracted.
19. WARNING: Lifting with the 10.0 m extension base, with the 7.0 m extension fly either erected or folded along side of extension base, is
strictly prohibited.
20. When utilizing the 10.0 - 17.0 m folding boom extension, with or without inserts, the main boom will sequence as follows: inner-mid
100%, then center-mid 100%, then outer-mid & fly.
21. The maximum outrigger pad load is 55,792 kg.
DEFINITIONS:
1. Operating Radius: Horizontal distance from a projection of the axis of rotation to the supporting surface before loading to the center of
the vertical hoist line or tackle with load applied.
2. Loaded Boom Angle (Shown in Parenthesis on Main Boom Capacity Chart): is the angle between the boom base section and the
horizontal, after lifting the rated load at the rated radius with the rated boom length.
3. Working Area: Areas measured in a circular arc about the center line of rotation as shown on the working area diagram.
4. Freely Suspended Load: Load hanging free with no direct external force applied except by the lift cable.
5. Side Load: Horizontal force applied to the lifted load either on the ground or in the air.
RT890E - S/N 235382 4
 CAPACITY REDUCTIONS FOR SYNTHETIC ROPE USE:

If only synthetic rope is installed on the hoist(s), the following capacity reductions apply:

Main Boom Extension

Capacity Capacity
On outriggers fully extended 115 kg 0 kg

On outriggers 50% extended 300 kg 90 kg

On outriggers 0% extended 435 kg N/A

On rubber 150 kg N/A

If synthetic rope is installed on either the main or aux hoist, and wire rope is
installed on the other hoist, no capacity reductions are required.

LINE PULLS & REEVING INFORMATION

PERMISSIBLE NOMINAL
HOISTS CABLE SPECS.
LINE PULLS CABLE LENGTH

19 mm (3/4") 6x37 class

Main EIPS, IWRC Special Flexible 7,620 kg* 183 m
Min. breaking strength 26,670 kg
19 mm (3/4") 35x7 class, EEIPS+
Main &
Rotation resistant (non-rotating) 7,620 kg* 185 m
Aux.
Min. breaking strength 38,920 kg
19 mm (3/4") 35x7 class, EEIPS
Main &
Rotation resistant (non-rotating) 7,257 kg* 185 m
Aux.
Min. breaking strength 36,287 kg
22 mm Synthetic KZ-100
Main &
Hoist Rope (ISO) 7,620 kg* 191 m
Aux.
Min. breaking strength 38,100 kg
The approximate weight of 19 mm rope is 2.2 kg/m
The approximate weight of 22 mm synthetic rope is 0.32 kg/m
* With certain boom and hoist tackle combinations, the allowable line pull may be limited
by hoist performance. Refer to Hoist Performance table for lift planning to ensure
adequate hoist performance on drum rope layer required.

RT890E - S/N 235382 5

 WEIGHT REDUCTIONS FOR INSTALLATION AND REMOVAL
LOAD HANDLING DEVICES OF COUNTERWEIGHT AND
10.0 m - 17.0 m AUXILIARY HOIST
FOLDING BOOM EXTENSION RATED LIFTING CAPACITIES IN KILOGRAMS
*10.0 m Extension (Erected) - 1,700 kg ON OUTRIGGERS FULLY EXTENDED - 360°
*17.0 m Extension (Erected) - 3,630 kg
Radius RCL code #0801
*Reduction of main boom capacities
in
(no deduct required for stowed boom extension) Main Boom Length
Meters
11.4 m*
AUXILIARY BOOM NOSE 60 kg
HOOKBLOCKS and HEADACHE BALLS: 3 11,794
72.6 t, 5 sheave 725 kg+ 3.5 11,794
81.6 t, 5 sheave 620 kg+ 4 11,794
10.9 t overhaul ball 253 kg+ 4.5 11,794
+Refer to rating plate for actual weight.
5 11,794
When lifting over boom extension, deduct total weight 6 11,794
of all load handling devices reeved over main boom
nose directly from boom extension capacity. 7 11,794
8 11,794
NOTE: All load handling devices and boom attach-
ments are considered part of the load and suitable 9 11,794
allowances MUST BE MADE for their combined
* The boom must be fully retracted.
weights. Weights are for Grove furnished equipment.
A6-829-103469A

HOIST PERFORMANCE
Hoist Line Pulls
Wire Drum Rope
Two Speed Hoist
Rope capacity (m)
Low High
Layer
Available kg* Available kg* Layer Total
1 9,185 4,359 30.8 30.8
2 8,387 3,978 33.5 64.3
3 7,716 3,660 36.6 100.9
4 7,144 3,388 39.3 140.2
5 6,650 3,157 42.4 182.6
*Refer to line pulls and reeving information table for max.
lifting capacity of wire rope.

NOTE: When the hoist line pull exceeds the permissible line pull of
the wire rope equipped, the maximum lifting capacity will be dictated
by the wire rope's permissible line pull.

Synthetic rope layer height may vary and may reduce available line pull per layer.

RT890E - S/N 235382 6

RT890E - S/N 235382 7
 0°

MODE B SHOWN

RT890E - S/N 235382 8

 BOOM SECTION vs.
SECTION EXTENSION PERCENTAGES

MODE A - Inner Mid Retracted

Main Boom Length in Meters
11.4 15.4 19.3 23.3 27.3 31.2 35.2 43.2
Boom sections: Percent Extension
Inner-mid 0 0 0 0 0 0 0 100
Center-mid 0 50 100 100 100 100 100 100
Outer-mid 0 0 0 25 50 75 100 100
Fly 0 0 0 25 50 75 100 100

MODE B - Normal Mode

Main Boom Length in Meters
11.4 15.4 19.4 23.4 27.4 31.3 35.3 39.3 43.2
Boom sections: Percent Extension
Inner-mid 0 50 75 75 100 100 100 100 100
Center-mid 0 0 25 75 100 100 100 100 100
Outer-mid 0 0 0 0 0 25 50 75 100
Fly 0 0 0 0 0 25 50 75 100

RT890E - S/N 235382 9

RT890E - S/N 235382 10
 RATED LIFTING CAPACITIES IN KILOGRAMS WITH COUNTERWEIGHT - MODE A
11.4 m - 43.2 m BOOM

ON OUTRIGGERS FULLY EXTENDED - 360°

#0001
Radius
in Main Boom Length in Meters
Meters
11.4 15.4 19.3 23.3 27.3 31.2 35.2 43.2
++80,000 60,775 *36,650
3
(69) (75) (78)
+73,650 60,775 36,650
3.5
(66) (73) (77)
66,225 59,950 36,650 *17,550
4
(63) (71) (75.5) (78)
59,425 58,775 36,650 17,550
4.5
(60) (69) (74) (77)
54,550 54,725 35,375 17,550 *17,450
5
(57) (67) (72) (76) (78)
45,475 45,600 32,450 17,550 17,450 *17,400
6
(50) (62.5) (69) (73.5) (76.5) (78)
38,975 39,100 29,850 17,550 17,450 17,400
7
(42) (58) (65.5) (70.5) (74.5) (77)
32,650 34,200 27,450 17,550 17,450 17,300 *11,050
8
(32.5) (53) (62.5) (68) (72) (75) (78)
24,550 28,300 25,350 17,550 17,450 17,025 11,050
9
(17) (48) (58.5) (65) (70) (73.5) (76)
23,125 23,100 17,550 17,000 15,900 11,050 *11,050
10
(42.5) (55) (62.5) (67.5) (71.5) (74.5) (78)
16,475 16,225 17,075 15,075 13,600 11,050 11,000
12
(27.5) (47) (56.5) (62.5) (67) (71) (75.5)
12,025 12,825 13,075 11,800 10,850 9,755
14
(37.5) (50) (57.5) (63) (67.5) (72.5)
9,175 9,905 10,600 10,325 9,525 8,550
16
(24) (42.5) (52) (58.5) (63.5) (69.5)
7,785 8,425 8,855 8,425 7,475
18
(34) (46.5) (54) (60) (66.5)
6,160 6,770 7,200 7,495 6,565
20
(21.5) (39.5) (49) (55.5) (63.5)
See 5,475 5,900 6,325 5,455
22
Note 16 (31.5) (43.5) (51.5) (60.5)
4,415 4,860 5,280 4,430
24
(20) (37) (46.5) (57)
4,000 4,425 3,585
26
(29.5) (41.5) (54)
3,270 3,705 2,885
28
(19) (35.5) (50)
3,095 2,285
30
(28.5) (46.5)
2,560 1,775
32
(18.5) (42)
1,330
34
(37.5)
940
36
(32.5)
585
38
(26)
Minimum boom angle (deg.) for indicated length (no load) 24
Maximum boom length (m) at 0 deg. boom angle (no load) 35.2
#RCL operating code. Refer to RCL manual for instructions.
*This capacity is based upon maximum obtainable boom angle.
Note: ( ) Boom angles are in degrees.
++11 parts line required to lift this capacity (using aux. boom nose) when using wire rope with a min. breaking
strength of 38,920 kg. 12 parts line (using special equipment) when using wire rope with a min. breaking
strength of 36,287 kg. Refer to Operator's & Safety Handbook for reeving diagram.
+11 parts line required to lift this capacity (using aux. boom nose) when using wire rope with a min.
breaking strength of 36,287 kg. Refer to Operator's & Safety Handbook for reeving diagram.
Lifting Capacities at Zero Degree Boom Angle

Boom Main Boom Length in Meters

Angle 11.4 15.4 19.3 23.3 27.3 31.2 35.2
12,475 7,845 5,030 3,890 3,040 2,440 1,940
0°
(9.2) (13.2) (17.1) (21.1) (25) (29) (33)
Note: ( ) Reference radii in meters. A6-829-103458B
RT890E - S/N 235382 11
 RATED LIFTING CAPACITIES IN KILOGRAMS WITH COUNTERWEIGHT - MODE A
11.4 m - 43.2 m BOOM

ON OUTRIGGERS 50% EXTENDED (5.3 m spread) - 360°

#4001
Radius
in Main Boom Length in Meters
Meters
11.4 15.4 19.3 23.3 27.3 31.2 35.2 43.2
67,800 60,775 *36,650
3
(69) (75) (78)
60,375 58,500 36,650
3.5
(66) (73) (77)
53,725 53,650 36,650 *17,550
4
(63) (71) (75.5) (78)
47,750 47,675 36,650 17,550
4.5
(60) (69) (74) (77)
43,025 42,950 35,375 17,550 *17,450
5
(57) (67) (72) (76) (78)
35,850 33,400 31,375 17,550 17,450 *17,400
6
(50) (62.5) (69) (73.5) (76.5) (78)
26,200 25,075 24,550 17,550 17,450 17,400
7
(42) (58) (65.5) (70.5) (74.5) (77)
19,875 19,450 19,775 17,550 17,450 17,300 *11,050
8
(32.5) (53) (62.5) (68) (72) (75) (78)
15,525 15,600 15,750 16,600 16,650 16,550 11,050
9
(17) (48) (58.5) (65) (70) (73.5) (76)
12,775 12,825 13,825 14,175 14,175 11,050 *11,050
10
(42.5) (55) (62.5) (67.5) (71.5) (74.5) (78)
8,885 8,850 9,705 10,525 10,725 10,800 9,155
12
(27.5) (47) (56.5) (62.5) (67) (71) (75.5)
6,220 7,020 7,755 8,145 8,485 7,000
14
(37.5) (50) (57.5) (63) (67.5) (72.5)
4,370 5,125 5,800 6,195 6,590 5,395
16
(24) (42.5) (52) (58.5) (63.5) (69.5)
See 3,700 4,355 4,755 5,155 4,150
18
Note 16 (34) (46.5) (54) (60) (66.5)
2,600 3,215 3,650 4,050 3,155
20
(21.5) (39.5) (49) (55.5) (63.5)
2,310 2,760 3,175 2,335
22
(31.5) (43.5) (51.5) (60.5)
1,575 2,025 2,460 1,635
24
(20) (37) (46.5) (57)
1,415 1,855 1,050
26
(29.5) (41.5) (54)
905 1,340 560
28
(19) (35.5) (50)
905
30
(28.5)
530
32
(18.5)
0.1A (kg) 680 705 700 630 580 540 510 590
Minimum boom angle (deg.) for indicated length (no load) 10 48
Maximum boom length (m) at 0 deg. boom angle (no load) 31.2
#RCL operating code. Refer to RCL manual for instructions.
*This capacity is based upon maximum obtainable boom angle.
Note: ( ) Boom angles are in degrees.
Lifting Capacities at Zero Degree Boom Angle

Boom Main Boom Length in Meters

Angle 11.4 15.4 19.3 23.3 27.3 31.2
12,475 7,300 3,545 2,100 1,245 675
0°
(9.2) (13.2) (17.1) (21.1) (25) (29)
Note: ( ) Reference radii in meters. A6-829-103459
RT890E - S/N 235382 12
 RATED LIFTING CAPACITIES IN KILOGRAMS WITH COUNTERWEIGHT - MODE A
11.4 m - 43.2 m BOOM

ON OUTRIGGERS 0% EXTENDED (3.15 m spread) - 360°

#8001
Radius
in Main Boom Length in Meters
Meters
11.4 15.4 19.3 23.3 27.3 31.2 35.2 43.2
49,400 45,500 *36,650
3
(69) (75) (78)
40,800 36,575 33,575
3.5
(66) (73) (77)
33,450 30,275 28,025 *17,550
4
(63) (71) (75.5) (78)
28,000 25,575 23,850 17,550
4.5
(60) (69) (74) (77)
23,850 21,950 20,550 17,550 *17,450
5
(57) (67) (72) (76) (78)
17,875 16,375 15,725 15,850 15,725 *15,475
6
(50) (62.5) (69) (73.5) (76.5) (78)
13,125 12,400 12,350 12,650 12,725 12,625
7
(42) (58) (65.5) (70.5) (74.5) (77)
9,860 9,630 9,850 10,275 10,450 10,475 *10,475
8
(32.5) (53) (62.5) (68) (72) (75) (78)
7,460 7,585 7,820 8,335 8,695 8,800 8,860
9
(17) (48) (58.5) (65) (70) (73.5) (76)
6,020 6,175 6,725 7,235 7,440 7,550 *6,025
10
(42.5) (55) (62.5) (67.5) (71.5) (74.5) (78)
3,795 3,805 4,420 4,955 5,385 5,555 4,200
12
(27.5) (47) (56.5) (62.5) (67) (71) (75.5)
See 2,195 2,820 3,400 3,885 4,115 2,865
14
Note 16 (37.5) (50) (57.5) (63) (67.5) (72.5)
1,035 1,665 2,250 2,740 3,010 1,845
16
(24) (42.5) (52) (58.5) (63.5) (69.5)
790 1,380 1,830 2,135 1,040
18
(34) (46.5) (54) (60) (66.5)
700 1,110 1,430
20
(39.5) (49) (55.5)
535 850
22
(43.5) (51.5)
0.1A (kg) 680 705 700 630 580 540 510 590
Minimum boom angle (deg.) for indicated
30 37 42 48 64
length (no load)
Maximum boom length (m) at 0 deg. boom
19.3
angle (no load)
#RCL operating code. Refer to RCL manual for instructions.
*This capacity is based upon maximum obtainable boom angle.
Note: ( ) Boom angles are in degrees.
Lifting Capacities at Zero Degree Boom Angle

Boom Main Boom Length in Meters

Angle 11.4 15.4 19.3
7,085 2,850 505
0°
(9.2) (13.2) (17.1)
Note: ( ) Reference radii in meters. A6-829-103460

RT890E - S/N 235382 13

 ON RUBBER CAPACITIES WITH COUNTERWEIGHT - MODE A

STATIONARY CAPACITIES - 360°

#9005
Radius
in Main Boom Length in Meters
Meters
11.4 15.4 19.3 23.3
17,925 18,875
4
(63) (71)
17,925 18,850 8,585 7,110
4.5
(60) (69) (74) (77)
16,300 16,975 8,585 7,110
5
(57) (67) (72) (76)
12,475 12,550 8,585 7,110
6
(50) (62.5) (69) (73.5)
9,930 9,860 8,345 7,110
7
(42) (58) (65.5) (70.5)
7,520 7,595 7,500 7,110
8
(32.5) (53) (62.5) (68)
5,515 5,725 5,710 6,520
9
(17) (48) (58.5) (65)
4,360 4,360 5,300
10
(42.5) (55) (62.5)
2,450 2,605 3,225
12
(27.5) (47) (56.5)
Minimum boom angle (°) for
39 46
indicated length (no load)
Maximum boom length (m) at 0°
15.4
boom angle (no load)
Note: ( ) Boom angles are in degrees.

Lifting Capacities at Zero Degree Boom Angle

Boom Main Boom Length in Meters

Angle 11.4 15.4
5,185 1,430
0°
(9.2) (13.2)
Note: ( ) Reference radii in meters.
A6-829-103467A

#RCL operating code. Refer to RCL manual for

instructions.

RT890E - S/N 235382 14

 ON RUBBER CAPACITIES WITH COUNTERWEIGHT - MODE A (cont'd.)

PICK & CARRY CAPACITIES (UP TO 4.0 km/h) -

NOTES TO ALL RUBBER CAPACITY CHARTS:
BOOM CENTERED OVER FRONT (See note 6)
#9006 1. Capacities are in kilograms and do not exceed
Radius 85% of tipping loads as determined by test in
in Main Boom Length in Meters accordance with SAE J765.
Meters
11.4 15.4 19.3 23.3
2. Capacities are applicable to machines
18,875 18,900 equipped with 29.5x25 (34 ply) tires at 5.2 bar
4
(63) (71) cold inflation pressure.
18,875 18,900 10,150 7,110
4.5 3. Capacities appearing above the bold line are
(60) (69) (74) (77)
based on structural strength and tipping should
18,200 18,225 10,150 7,110
5 not be relied upon as a capacity limitation.
(57) (67) (72) (76)
16,575 16,675 10,150 7,110 4. Capacities are applicable only with machine
6
(50) (62.5) (69) (73.5) on firm level surface.
14,100 14,325 10,150 7,110
7 5. On rubber lifting with boom extensions not
(42) (58) (65.5) (70.5)
permitted.
11,800 12,125 10,150 7,110
8
(32.5) (53) (62.5) (68) 6. For pick and carry operation, boom must be
9,930 10,325 10,150 7,110 centered over front of machine, mechanical
9 swing lock engaged and load restrained from
(17) (48) (58.5) (65)
8,870 9,025 7,110 swinging. When handling loads in the struc-
10 tural range with capacities close to maximum
(42.5) (55) (62.5)
ratings, travel should be reduced to creep
6,470 6,715 7,110
12 speeds.
(27.5) (47) (56.5)
4,970 5,630 7. Axle lockouts must be functioning when lifting
14
(37.5) (50) on rubber.
3,635 4,310 8. All lifting depends on proper tire inflation,
16
(24) (42.5)
capacity and condition. Capacities must be
Minimum boom angle (°) for indicated length reduced for lower tire inflation pressures. See
36
(no load) lifting capacity chart for tire used. Damaged
Maximum boom length (m) at 0° boom angle tires are hazardous to safe operation of crane.
19.3
(no load)
9. Creep - not over 61 m of movement in any 30
Note: ( ) Boom angles are in degrees.
minute period and not exceeding 1.6 km/h.
Lifting Capacities at Zero Degree Boom Angle

Boom Main Boom Length in Meters

Angle 11.4 15.4 19.3
9,590 5,375 2,975
0°
(9.2) (13.2) (17.1)
Note: ( ) Reference radii in meters.
A6-829-103468

#RCL operating code. Refer to RCL manual for

instructions.

RT890E - S/N 235382 15

 RATED LIFTING CAPACITIES IN KILOGRAMS WITH COUNTERWEIGHT - MODE B
11.4 m - 43.2 m BOOM
ON OUTRIGGERS FULLY EXTENDED - 360°
Radius #0001
in Main Boom Length in Meters
Meters
11.4 15.4 19.4 23.4 27.4 31.3 35.3 39.3 43.2
++80,000 60,775 *44,225
3
(69) (75) (78)
+73,650 60,775 44,225
3.5
(66) (73) (77)
66,225 59,725 44,225
4
(63) (71) (75.5)
59,425 58,200 44,225 31,725
4.5
(60) (69) (74) (77.5)
54,550 53,975 42,775 30,900 *21,125
5
(57) (67) (72.5) (76) (78)
45,475 44,975 39,400 29,025 21,125 *17,550
6
(50) (62.5) (69) (73.5) (76.5) (78)
38,975 38,550 36,025 26,550 19,875 17,550
7
(42) (58) (66) (70.5) (74.5) (76.5)
32,650 33,600 32,675 24,200 18,500 17,450 16,850 *13,975
8
(32.5) (53.5) (62.5) (68) (72) (75) (77) (78)
24,550 27,500 27,800 22,125 17,125 17,225 16,000 13,975
9
(17) (48.5) (59) (65.5) (70) (73) (75.5) (77.5)
22,275 22,350 20,375 15,900 15,975 14,825 13,475 *11,050
10
(42.5) (55.5) (62.5) (67.5) (71) (73.5) (76) (78)
15,575 15,400 15,475 13,725 13,500 12,650 11,900 11,000
12
(28) (47) (56.5) (62.5) (67) (70) (73) (75.5)
See 11,125 11,300 11,250 11,525 10,850 10,275 9,755
14
Note 16 (37.5) (50) (57.5) (62.5) (66.5) (69.5) (72.5)
8,245 8,470 8,355 8,965 9,375 8,935 8,550
16
(24.5) (43) (52.5) (58.5) (63) (66.5) (69.5)
6,430 6,260 6,870 7,480 7,775 7,475
18
(34) (46.5) (53.5) (59) (63) (66.5)
4,870 4,675 5,285 5,890 6,310 6,565
20
(22.5) (40) (48.5) (55) (59.5) (63.5)
3,440 4,045 4,650 5,050 5,455
22
(32) (43.5) (50.5) (56) (60.5)
2,425 3,045 3,650 4,040 4,430
24
(21) (37) (46) (52) (57)
2,230 2,830 3,210 3,585
26
(29.5) (41) (48) (54)
1,525 2,145 2,515 2,885
28
(19.5) (35) (44) (50)
1,565 1,925 2,285
30
(28) (39) (46.5)
1,050 1,420 1,775
32
(18.5) (33.5) (42)
975 1,330
34
(27) (37.5)
580 940
36
(17.5) (32.5)
585
38
(26)
Minimum boom angle (deg.) for indicated length (no load) 0 24
Maximum boom length (m) at 0 deg. boom angle (no load) 39.3
#RCL operating code. Refer to RCL manual for instructions.
*This capacity is based upon maximum obtainable boom angle.
Note: ( ) Boom angles are in degrees.
++11 parts line required to lift this capacity (using aux. boom nose) when using wire rope with a min. breaking strength
of 38,920 kg. 12 parts line required (using special equipment) when using wire rope with a min. breaking strength
of 36,287 kg . Refer to Operator's & Safety Handbook for reeving diagram.
+11 parts line required to lift this capacity (using aux. boom nose) when using wire rope with a min. breaking strength of
36,287 kg. Refer to Operator's & Safety for reeving diagram.
Lifting Capacities at Zero Degree Boom Angle

Boom Main Boom Length in Meters

Angle 11.4 15.4 19.4 23.4 27.4 31.3 35.3
12,475 7,245 4,340 2,650 1,240 865 545
0°
(9.2) (13.2) (17.2) (21.2) (25.2) (29.1) (33.1)
Note: ( ) Reference radii in meters. A6-829-103461B
RT890E - S/N 235382 16
 10.0 m - 17.0 m FOLDING BOOM EXTENSION WITH COUNTERWEIGHT - MODE B
ON OUTRIGGERS FULLY EXTENDED - 360°
10.0 m LENGTH 17.0 m LENGTH
Radius
0° 20° 40° 0° 20° 40°
in
OFFSET OFFSET OFFSET OFFSET OFFSET OFFSET
Meters
#0021 #0022 #0023 #0041 #0042 #0043
6,210
12
(78)
6,210 *5,890 3,245
14
(76.5) (78) (78)
6,210 5,795 3,245
16
(74) (77) (77)
6,210 5,565 4,575 3,245 *2,900
18
(72) (74.5) (77) (75) (78)
6,200 5,375 4,480 3,245 2,825
20
(69.5) (72) (74.5) (73) (77.5)
5,905 5,180 4,395 3,245 2,745
22
(67) (69.5) (72) (71) (75.5)
5,085 5,015 4,315 3,245 2,665 2,285
24
(64.5) (67.5) (69.5) (68.5) (73.5) (77)
4,195 4,615 4,235 3,235 2,595 2,230
26
(62) (64.5) (67) (66.5) (71) (75)
3,455 3,825 4,005 3,125 2,530 2,185
28
(59.5) (62) (64.5) (64.5) (69) (72.5)
2,825 3,155 3,500 3,015 2,465 2,145
30
(57) (59.5) (61.5) (62) (66.5) (70.5)
2,280 2,580 2,865 2,735 2,410 2,110
32
(54) (56.5) (58.5) (60) (64.5) (68)
1,815 2,080 2,310 2,250 2,350 2,080
34
(51) (53.5) (55.5) (57.5) (62) (65.5)
1,400 1,640 1,830 1,820 2,290 2,050
36
(48) (50.5) (52.5) (55) (59.5) (63)
1,040 1,255 1,400 1,445 1,870 2,025
38
(45) (47.5) (49) (52.5) (57) (60)
715 910 1,110 1,495 1,730
40
(41.5) (44) (50) (54.5) (57)
605 810 1,160 1,355
42
(40) (47) (51.5) (54)
540 860 1,020
44
(44.5) (48.5) (51)
585 720
46
(45.5) (47.5)
Minimum boom angle
(°) for indicated length 38 38 40 43 44 44
(no load)
Maximum boom length
(m) at 0° boom angle 31.3 27.4
(no load)
NOTE: ( ) Boom angles are in degrees. A6-829-103464A
#RCL operating code. Refer to RCL manual for operating instructions.
*This capacity is based upon maximum boom angle.

1. All capacities above the bold line are based on structural strength of boom extension and do not exceed 85% of tipping
loads.
2. The 10.0 m and 17.0 m extension lengths may be used for single line lifting service only.
3. For main boom lengths less than 43.2 m with the boom extension erected, the rated loads are determined by boom angle.
Use only the column which corresponds to the boom extension length and offset for which the machine is set up. For boom
angles not shown, use rating of the next lower boom angle.
4. WARNING: Operation of this machine with heavier loads than the capacities listed is strictly prohibited. Machine tipping with
boom extension occurs rapidly and without advance warning.
5. Boom angle is the angle above or below horizontal of the longitudinal axis of the boom base section after lifting rated load.
6. Capacities listed are with outriggers properly extended and vertical jacks set only.
7. When lifting over the main boom nose with 10.0 m or 17.0 m extension erected, the outriggers must be fully extended or
50% extended (5.3 m spread).
RT890E - S/N 235382 17
 RATED LIFTING CAPACITIES IN KILOGRAMS WITH COUNTERWEIGHT - MODE B
11.4 m - 43.2 m BOOM

ON OUTRIGGERS 50% EXTENDED (5.3 m spread) - 360°

#4001
Radius
in Main Boom Length in Meters
Meters
11.4 15.4 19.4 23.4 27.4 31.3 35.3 39.3 43.2
67,800 60,775 *44,225
3
(69) (75) (78)
60,375 58,000 44,225
3.5
(66) (73) (77)
53,725 52,875 44,225
4
(63) (71) (75.5)
47,750 47,000 44,225 31,725
4.5
(60) (69) (74) (77.5)
43,025 42,300 40,425 30,900 *21,125
5
(57) (67) (72.5) (76) (78)
35,850 32,225 29,975 28,400 21,125 *17,550
6
(50) (62.5) (69) (73.5) (76.5) (78)
26,200 24,875 23,275 22,225 19,875 17,550
7
(42) (58) (66) (70.5) (74.5) (76.5)
19,875 19,075 18,625 17,875 16,850 17,025 16,850 *13,975
8
(32.5) (53.5) (62.5) (68) (72) (75) (77) (78)
15,525 15,050 15,125 14,625 13,800 14,100 14,225 13,975
9
(17) (48.5) (59) (65.5) (70) (73) (75.5) (77.5)
12,075 12,150 12,100 11,425 11,825 12,025 12,150 *11,050
10
(42.5) (55.5) (62.5) (67.5) (71) (73.5) (76) (78)
8,025 8,080 8,150 7,905 8,500 8,810 9,020 9,155
12
(28) (47) (56.5) (62.5) (67) (70) (73) (75.5)
See 5,395 5,580 5,350 5,955 6,540 6,810 7,000
14
Note 16 (37.5) (50) (57.5) (62.5) (66.5) (69.5) (72.5)
3,505 3,765 3,565 4,160 4,740 5,170 5,395
16
(24.5) (43) (52.5) (58.5) (63) (66.5) (69.5)
2,400 2,240 2,830 3,405 3,850 4,150
18
(34) (46.5) (53.5) (59) (63) (66.5)
1,350 1,200 1,805 2,375 2,790 3,155
20
(22.5) (40) (48.5) (55) (59.5) (63.5)
985 1,560 1,950 2,335
22
(43.5) (50.5) (56) (60.5)
900 1,270 1,635
24
(46) (52) (57)
700 1,050
26
(48) (54)
560
28
(50)
0.1A (kg) 680 760 770 760 780 715 665 630 590
Minimum boom angle (deg.) for indicated length
33 39 43 46 48
(no load)
Maximum boom length (m) at 0 deg. boom angle
23.4
(no load)
#RCL operating code. Refer to RCL manual for instructions.
*This capacity is based upon maximum obtainable boom angle.
Note: ( ) Boom angles are in degrees.
Lifting Capacities at Zero Degree Boom Angle

Boom Main Boom Length in Meters

Angle 11.4 15.4 19.4 23.4
12,475 6,310 2,615 835
0°
(9.2) (13.2) (17.2) (21.2)
Note: ( ) Reference radii in meters. A6-829-103462
RT890E - S/N 235382 18
 10.0 m - 17.0 m FOLDING BOOM EXTENSION WITH COUNTERWEIGHT - MODE B
ON OUTRIGGERS 50% EXTENDED (5.3 m spread) - 360°
10.0 m LENGTH 17.0 m LENGTH
Radius
0° 20° 40° 0° 20° 40°
in
OFFSET OFFSET OFFSET OFFSET OFFSET OFFSET
Meters
#4021 #4022 #4023 #4041 #4042 #4043
6,210
12
(78)
6,210 *5,890 3,245
14
(76.5) (78) (78)
5,465 5,795 3,245
16
(74) (77) (77)
4,290 5,050 4,575 3,245 *2,900
18
(72) (74.5) (77) (75) (78)
3,350 4,015 4,480 3,245 2,825
20
(69.5) (72) (74.5) (73) (77.5)
2,575 3,165 3,650 2,880 2,745
22
(67) (69.5) (72) (71) (75.5)
1,930 2,460 2,875 2,245 2,665 2,285
24
(64.5) (67.5) (69.5) (68.5) (73.5) (77)
1,385 1,855 2,215 1,705 2,515 2,230
26
(62) (64.5) (67) (66.5) (71) (75)
915 1,335 1,650 1,240 1,970 2,185
28
(59.5) (62) (64.5) (64.5) (69) (72.5)
510 885 1,155 835 1,500 1,945
30
(57) (59.5) (61.5) (62) (66.5) (70.5)
720 1,085 1,455
32
(58.5) (64.5) (68)
715 1,030
34
(62) (65.5)
655
36
(63)
0.1A (kg) 565 545 565 525 515 535
Minimum boom angle
(°) for indicated length 54 55 56 57 58 59
(no load)
Maximum boom length
(m) at 0° boom angle 23.4 19.4
(no load)
NOTE: ( ) Boom angles are in degrees. A6-829-103465A
#RCL operating code. Refer to RCL manual for operating instructions.
*This capacity is based upon maximum boom angle.
1. All capacities above the bold line are based on structural strength of boom extension.
2. The 10.0 m and 17.0 m extension lengths may be used for single line lifting service only.
3. For main boom lengths less than 43.2 m with the boom extension erected, the rated loads are determined by boom angle. Use only
the column which corresponds to the boom extension length and offset for which the machine is set up. For boom angles not
shown, use rating of the next lower boom angle.
4. WARNING: Operation of this machine with heavier loads than the capacities listed is strictly prohibited. Machine tipping with boom
extension occurs rapidly and without advance warning.
5. Boom angle is the angle above or below horizontal of the longitudinal axis of the boom base section after lifting rated load.
6. Capacities listed are with outriggers properly extended and vertical jacks set only.
7. When lifting over the main boom nose with 10.0 m or 17.0 m extension erected, the outriggers must be fully extended or 50%
extended (5.3 m spread).
RT890E - S/N 235382 19
 RATED LIFTING CAPACITIES IN KILOGRAMS WITH COUNTERWEIGHT - MODE B
11.4 m - 43.2 m BOOM

ON OUTRIGGERS 0% EXTENDED (3.15 m spread) - 360°

#8001
Radius
in Main Boom Length in Meters
Meters
11.4 15.4 19.4 23.4 27.4 31.3 35.3 39.3 43.2
49,400 44,100 *39,600
3
(69) (75) (78)
40,800 35,350 32,125
3.5
(66) (73) (77)
33,450 29,125 26,700
4
(63) (71) (75.5)
28,000 24,525 22,600 21,225
4.5
(60) (69) (74) (77.5)
23,850 20,925 19,375 18,300 *16,975
5
(57) (67) (72.5) (76) (78)
17,875 15,700 14,625 13,900 12,950 *13,100
6
(50) (62.5) (69) (73.5) (76.5) (78)
13,125 12,050 11,325 10,800 10,050 10,350
7
(42) (58) (66) (70.5) (74.5) (76.5)
9,860 9,325 8,870 8,510 7,875 8,280 8,495 *8,625
8
(32.5) (53.5) (62.5) (68) (72) (75) (77) (78)
7,460 7,115 6,950 6,720 6,180 6,640 6,920 7,105
9
(17) (48.5) (59) (65.5) (70) (73) (75.5) (77.5)
5,425 5,425 5,285 4,820 5,325 5,645 5,875 *6,025
10
(42.5) (55.5) (62.5) (67.5) (71) (73.5) (76) (78)
3,020 3,100 3,100 2,750 3,330 3,705 3,995 4,200
12
(28) (47) (56.5) (62.5) (67) (70) (73) (75.5)
See 1,440 1,550 1,250 1,880 2,305 2,625 2,865
14
Note 16 (37.5) (50) (57.5) (62.5) (66.5) (69.5) (72.5)
765 1,225 1,585 1,845
16
(58.5) (63) (66.5) (69.5)
750 1,040
18
(63) (66.5)
0.1A (kg) 680 760 770 760 780 715 665 630 590
Minimum boom angle (deg.) for
29 44 54 55 60 61 64
indicated length (no load)
Maximum boom length (m) at 0
15.4
deg. boom angle (no load)
#RCL operating code. Refer to RCL manual for instructions.
*This capacity is based upon maximum obtainable boom angle.
Note: ( ) Boom angles are in degrees.
Lifting Capacities at Zero Degree Boom Angle

Boom Main Boom Length in Meters

Angle 11.4 15.4
7,085 1,965
0°
(9.2) (13.2)
Note: ( ) Reference radii in meters. A6-829-103463

RT890E - S/N 235382 20

 TIRE INFLATION - PSI (BAR)

SIZE LIFTING SERVICE , GENERAL

(FRONT TRA TRAVEL AND EXTENDED TRAVEL
& CODE
REAR) STATIC, CREEP &
2.5 MPH (4.0 km/h)

29.5x25 (34) E-3 76 (5.2)

76 (5.2)
Michelin
----- (SEE OPERATOR'S MANUAL FOR
29.5R25 XHA
EXTENDED ROADING)

RT890E - S/N 235382 21