Blau and Blanca 3r ESO A

CARRUSSEL PROJECT

8/11/2022

Blau and Blanca

Blau and Blanca 3r ESO A

ÍNDEX
Introduction.................................................................................................................................4
Aim of the project........................................................................................................................5
List of materials and tools............................................................................................................6
Operations sheet..........................................................................................................................7
Working drawings......................................................................................................................11
...................................................................................................................................................11
Budget........................................................................................................................................12
Evaluation and suggested improvements..................................................................................13
Annexes......................................................................................................................................14
Blau and Blanca 3r ESO A

Introduction

The project is about building a figure that has something that we have studied this year, like
pulleys, gears, levers, simple machines...
Blau and Blanca 3r ESO A

Aim of the project

The aim of our project is to build a carrussel that works with a motor.
Blau and Blanca 3r ESO A

List of materials and tools

▪ : Make a list of all the materials and tools needed to make the structure. Use a table
like the one below.

Materials Tools

Amount Description

Glue gun and glue stick Ruler

A lot Carton pencil

4 or 5 Wood sticks Scissors

6 Small balls Hot glue

1 Cell Pliers

1 Motor welder

1 Switch
Blau and Blanca 3r ESO A

Operations sheet

Operation Tools or
Description Time
number machines used

1 Take a large cardboard and Ruler and pencil 5 minutes

draw a circle of 15 cm radius
with the measure. Track
number 1.

2 Draw an octagon around the Ruler and pencil 5 minutes

circle and another circle 12 cm
in diameter inside the previous
one. Track number 1.

3 Grab a piece of cardboard and Ruler and pencil 5 minutes

draw piece number 2 with no
corresponding measurements.
Make 4 units.

4 Draw 3 circles of bottle cap size. Ruler, pencil 3 minutes

5 Paste the 3 circle together in Glue gun 5 minutes

the middle of piece number 1
and also paste a bearing.

6 Paste the 4 units of piece 2 Glue gun 7 minutes

around the 12 cm circle of
radius.

7 Draw another circle 15 cm in pencil 5 minutes

radius and one in 12 cm in
radius.

8 Make 6 holes in the circle 12 cm pencil 2 minutes

in radius.

9 Separate a piece of cardboard 1 minte

that remains as in piece 3.

10 Cut wooden poles the same size scissors 20 minutes

as the cardboard and place
them inside.

11 Cut Part 3 for each separation. Scissors 5 minutes

12 Paste each piece into the 15 cm Glue gun 10 minutes

circle with holes.
Blau and Blanca 3r ESO A

13 Cut three circles in the bottle- Scissors and 3 minutes

cover-sized cardboard and pencil
make everyone a hole in the
middle.

14 Paste the circles together in the Glue gun 3 minutes

middle of the 15 cm circle with
holes.

15 Inside the hole, lay a wooden 1 minute

pole.

16 Cut two circles of the same size Scissors and 5 minuted

and make a hole in the middle. pencil

17 Cut a piece of cartro to Cut a piece of 3 minutes

surround the two circles (like cartro to
piece 3). Paste it together. surround the
two circles (like
piece 3)

18 Weld one cell, one interuptor Welder 6 minutes

and one motor together.

19 Let's put circles in the engine. 1 minute

20 Cut a piece of cardboard the Scissors 2 minutes

size of one of the sides of the
octagon and the width of about
5 cm

21 Paste to the corresponding side Glue gun 1 minute

22 Cut a few pieces of 5 cm long Scissors 3 minutes

and 2 cm wide cardboard.

23 Paste them all together and this Glue gun 3 minutes

pile hits it between the octagon
and the piece that added me to
the octagon before.

24 Take six 30 cm wooden poles Glue gun 4 minutes

and one of the tips of each ball.

25 Place the poles inside each of 1 minute

the holes in the 15 cm circle

26 Take this figure and place it on

the octagon.

27 Cut a cardboard that is as wide Scissors 4 minutes

as the figure that hits me in the
octagon and is 8.5 cm tall. Make
Blau and Blanca 3r ESO A

it a rectangle-shaped hole in
the middle.

28 Cut two cartons of the same Scissors 6 minutes

height as before but 2 cm wide.

29 Paste this cartrons around what Glue gun 4 minutes

added me to the octagon.

30 In the hole in the cardboard 1 minute

piece on step 27 puts the circuit
switch I made before.

31 Cut 7 pieces of 13x8.5 cm Scissors 10 miuntes

cardboard.

32 In 4 of this, make him a hole in 3 minutes

the middle of the adal part.

33 In each hole it puts a wooden Scissors 25 minutes

pole of about 3cm, a small
piece of rectangle-shaped
cartro, a bearing and another
smaller piece of rectangle-
shaped cartro.

34 He hits all seven pieces of Glue gun 7 minutes

cardboard that I cut on each
side of the octagon.

35 Make a cardboard figure Scissors 5 minutes

covering all the spaces between
the parts and the circle
(octagon shape). And another
13x2cm figure that we'll use to
cover the space left by the
piece that hits me together
with the octagon.

36 We take a 20 cm long Scissors and 5 minutes

cardboard and fold it to form a glue gun
cylinder. We stick it in the
center of the circle.

37 Make another circle 15 cm and Scissors 10 minutes

make 6 holes. Each hole is
placed on one of the poles and
we lower the circle until I touch
the cardboard that hit me first.

38 Let's take mini-cardboard Scissors 5 minutes

pieces and put them at the end
Blau and Blanca 3r ESO A

of each suit.

39 We make 12 pieces of 5 cm in Scissors and 15 minutes

height and 3 cm in width and glue gun
hit them on each side of the
pole, which means that the
piece that I put before is in the
middle.

40 Let's make a cardboard 10 cm Scissors and 6 minutes

high, roll it up to make a glue gun
cylinder and hit it in the center
of the circle.

41 Let us make 12 triangles touch Scissors and 25 minutes

the end of the cylinder and glue gun
protrude from the cardboard
that is placed on the sides of
the pole.

42 At the center of the cylinder we Glue gun 1 minute

place a ball.

43 Let's do a cardboard to Scissors and 10 minutes

surround the whole circle and glue gun
cover from where the triangle
begins.

44 Let's make another one of this Scissors and 10 mintes

one for this time as small and glue gun
with a design, to reinforce.

45 We draw 12 unicorns on the Scissors and 30 minutes

cardboard and hit two on each glue gun
suit (one on each coast).

46 We paint the entire structure Paint 1 hour

Blau and Blanca 3r ESO A

Working drawings
Blau and Blanca 3r ESO A

Budget

Amount Concept Unit price Net price

Material costs

10 Long Wood chopsticks 0,04 ct 0,4 ct

20 Small wood chopsticks 0,31 ct 6,2 €

5 Silicone bars 1€ 5€

A lot Carton free free

4 Bearing free free

3 cell free free

6 Marble 0,40 ct 2,4 €

1 Motor 4, 77€ 4,77 €

2 Labour costs 9 €/h 18€

total tax free price 36,77 €

tax (21 %) 7.7 %

total price 44, 47 €

We take the cartons and bearings from our house. The bearings, we take them from a fidget
spinner. Some other materials, we had took of the workshop but, we put the price.
Blau and Blanca 3r ESO A

Evaluation and suggested improvements

Always or most of the time: 3 Sometimes:2 Never or hardly never:1

Group Member:

Blanca Blau
Evaluated item

Participated in group work 3 3

Maintained focus on the task 3 3

Provided ideas 3 3

Used English for communication 2 2

Took good care of the materials

3 3
and left everything tidy.

Total Score = 14 14
Blau and Blanca 3r ESO A

Annexes
Budget calculations:

Total tax free price: 0,4 + 6,2 + 5+ 2,4+ 4,77+18 = 36,77 €

Tax (21%) : 36,77·21 : 100 = 7,7 %

Total Price : 33,1 + 7,7 = 44,47 €