147X
147X
_________________________________________________________________________
Organize Sanayi Bölgesi 2.Cadde No.16 Tel: +90 216 5282200
Yukari Dudullu 81260 Fax: +90 216 3652943
Istanbul TURKEY //www.abb.com
_________________________________________________________________________________________________________
Medium Voltage, Air insulated, Metal-Clad Switchgear Type UniGear ZS-2 (former type name: UniSafe-36)
With apparatus VD4W 36- …-… p=275mm
Partition class: PM Loss of service continuity category LSC2B
Internal Arc Classification IAC AFLR, 31,5kA/1s
Internal arcing test with arcing due to IEC 62271-200 (AnnexA) 09-108 ZKU High Power Lab. (3)
internal fault with 31,5kA/1s
Making and breaking capacity tests,
Circuit breaker IEC 62271-200 6.101 A9028914 CESI S.p.A.
Basic short circuit duties, Single phase IEC 62271-100 A9029250 CESI S.p.A.
breaking tests, Double earth fault test, Out of
phase test, 3p Cable charging current
switching test class C2
Making capacity test, IEC 62271-200 6.101 HT140H05 ABB Calor Emag Laboratories
Earthing switch (type EK-6) IEC 62271-102 (5)
The test reports summary concern excusively the type tested. The document shall not be reproduced except in full
without the written approval of the Test Lab.
QC and Test Mng. PPMV TRABB
signed 2011-05-23
The organisation ABB Elektrik Sanayi A.S. has a Quality Management System which fulfills the requirements of ISO
9001:2008. Bureau Veritas Certification no TR30629
ABB Elektrik Sanayi A.S.
_________________________________________________________________________
Organize Sanayi Bölgesi 2.Cadde No.16 Tel: +90 216 5282200
Yukari Dudullu 81260 Fax: +90 216 3652943
Istanbul TURKEY //www.abb.com
_________________________________________________________________________________________________________
Accreditation of the Laboratories referred in this document , Acc to ISO / IEC 17025
(1) The Laboratory ABB PT SpA Unita Operativa Sace, Dalmine is Accredited by SINAL (Sistema Nazionale per
l’accreditamento di Laboratori) Certificate No: 0253
(2) LABORATORIO DI PROVA ABB SACE , Bergamo is Accredited by SINAL (Sistema Nazionale per
l’accreditamento di Laboratori) Certificate No: 0062
(3) ZKUSEBNICTVI A.S. High Power Laboratory, Praha is Accredited by CAI (Czech Accreditation Institute)
Certificate No: 451 / 2008
(4) The Laboratory CESI – Centro Elettrotecnico Sperimentale Italiano “G.Motta” SpA, Milano is Accredited by
SINAL (Sistema Nazionale per l’accreditamento di Laboratori) Certificate No: 0030
(5) ABB Calor Emag Laboratories, Ratingen is Accredited by DAR(Deutschen AkkreditierungsRat) Certificate
No:DAT-P-032/93-02
Note: Refer to IEC 62271-200 para:6.1 “variety of types, ratings and possible combinations of components” are
possible. In summary:
-Main earthing circuit equipped with EK-6 or ST-US 36 type Earthing switch. (In case of ST-US the Ima rating for
Earthing switch is limited to 63 kA and STC rating is limited to 25kA/3s and 31.5kA 1s)
- With metallic enclosures in 1000…1600mm width, 2400…3740 mm depth for single busbar and double busbar
arrangements.
-Different CB or Disconnector apparatus.
-OEM version as functional CB compartment only (PowerCube)
-Varieties for different ref. amb. temp than 40degC and the enclosure protection degree IP4X
Each variety and combination before issue for commercial production are already tested if any detail is affecting the
ratings and performances listed on page1 of this document and if may not “be substantiated by type test data of
comparable arrangements”.
The organisation ABB Elektrik Sanayi A.S. has a Quality Management System which fulfills the requirements of ISO
9001:2008. Bureau Veritas Certification no TR30629