Scribd
Upload
6 views

7. Shear Reinforcement

The document outlines a design and analysis problem for shear reinforcement in a reinforced concrete beam. It specifies the dimensions, loads, and material properties needed for the design, including a simply supported beam with a clear span of 7 meters. The task involves determining the spacing of 10 mm stirrups based on the given parameters.

Uploaded by

jimjimmorial
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
6 views

7. Shear Reinforcement

The document outlines a design and analysis problem for shear reinforcement in a reinforced concrete beam. It specifies the dimensions, loads, and material properties needed for the design, including a simply supported beam with a clear span of 7 meters. The task involves determining the spacing of 10 mm stirrups based on the given parameters.

Uploaded by

jimjimmorial
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

THE DEPARTMENT OF CIVIL ENGINEERING RATING:

Saint Joseph College, Maasin


Mambajao Extension Campus,
Mambajao, Maasin, Southern Leyte

Student Name Course, Yr. & Sec.


Student ID No Date Submitted

CE 20 – Principles of Reinforced/Prestressed Concrete

Plate No. 7
DESIGN & ANALYSIS OF SHEAR REINFORCEMENT

I. Problem Solving

1. A simply supported rectangular reinforced concrete beam 380 mm wide having an effective depth, d = 620
mm carries a total uniform factored load of 128.25 kN/m on a 7-meter clear span. Design the spacing of 10
mm Ø stirrups as shown in the figure. Use f’c = 28 MPa, fyt = 278 MPa.

Instructor:
Date:

You might also like