STORM II

AP-1523D
 SPECIFICATIONS
Model Name Storm AP-1523D
Coverage Area 50 ㎡
Dimension
412mm x 232mm x 752.5mm RM 3,190.00
W x D x H (mm)
1. Pre-Filter
2. Fine Dust Filter RM 105 (2 months) 752.5mm
Filter Types
3. Double Deodorization Filter RM 98 (4 months)
4. Copper HEPA H13
Air Flow Button Top, Front and Wide Circulation
Air Quality
PM 1.0, PM 2.5, PM 10
Indicators
Noise Level Up to 45.2db
Power
42W
Consumption
TABLE OF CONTENTS
01 02 03
FILTRATION PRODUCT STRUCTURE MODES TYPE

04 05 06
POLLUTION PARTS & CODES INSTALLATION
INDICATOR GUIDELINES
 01
FILTRATION
 • Overall filter size Enlarged By 50% Bigger
than the current Storm filters.
DOUBLE DEODORISATION COPPER HEPA
PRE-FILTER FINE DUST FILTER FILTER FILTER

• Filters large particles • Capture large and fine dust • Removes bad odour • Removes cigarette smoke,
like hair, fur, sand. such as pollen & pet dander. and harmful gases viruses, germs & fine dust
• Washable • 4 months • 24 months • 12 months
F I LT E R E N H A N C E M E N T

Double Copper HEPA

Deodorisation Filter H13 Filter
(Eliminate 5 major harmful gases*)

Upgraded Deodorization Filter to Storm II using Copper HEPA (H13)

Double Deodorization Filter. Grade from E12 –> H13.

> Double up to eliminate harmful gases and provide total > Can remove super-fine particle with
care from pet’s odor to human body odor. No worry about enhancement efficiency of performance.
bad odor any more.
 02
PRODUCT
STRUCTURE
P RO D U C T F RO N T
AIR QUALITY
SENSOR

AIR
OUTLET

AIR OUTLET

AIR QUALITY
INDICATOR

AIR INLET

FILTER COVER
P RO D U C T TO P
DETACHABLE AIR
OUTLET GRILLE

LIGHT
SENSOR

INDICATORS

BUTTONS

Light Sensor Light Button

Direction Button Lock Indicator
Detects Lights Around The Choose 3 different directions. Turn the air quality indicator When all buttons are locked, Indicator
Product. Top > Front > Wide Circulation and other indicators on and off. blinks twice and lights up..

Mode Button Air Quality/

Speed Button
Lock Button
Choose 4 different modes. Choose 3 different speed.
Smart > Turbo > Haze > Sleep Level 1> Level 2 > Level 3 Choose the dust size for measurement display/
Press more than 3 seconds to lock and unlock.

Power Button Dust Sensor

Turn The Product Measurement Indicator
On And Off.
A I R F LOW I M P ROV E M E N T S
• 250% stronger wind
STORM MODEL STORM II
AP-1516D AP-1523D
AIRFLOW
4.0 M DISTANCE 10.0 M
FRONT
DISCHARGE
▼ STORM Front discharge airflow speed measurement

Flow speed: 1.00 m/s

STORM AP- MODEL STORM II AP - 4.0 M
1516D 1523D

FAN
Φ265 X DIMENSION Φ320 X ▼ STORM II Front discharge airflow speed measurement

100mm 100mm Flow speed: 1.00 m/s

10.0 M

Standard FAN WEIGHT Standard

SPEC. : 425g SPEC. : 560g
±10g ±5g
 03
MODES TYPE
 04
POLLUTION
INDICATOR
 Blue Green Yellow Red
(Good) (Moderate) (Unhealthy) (Very Unhealthy)

PM 1.0
(㎍ / ㎥) 0 ~ 15 16 ~ 35 36 ~ 75 ≥ 76

PM 2.5
0 ~ 15 16~ 35 36 ~ 75 ≥ 76
(㎍ / ㎥)

PM 10
0 ~ 30 31 ~ 80 81 ~ 150 ≥ 151
(㎍ / ㎥)
 05
PARTS & CODES
PA RT S : M A I N P BA

AIR QUALITY PBA

STEPPING
MOTOR

FND PBA

AC
POWER
240V

KEY PBA
LED

BLDC MOTOR
 PA RT S : K E Y P BA
MAIN PBA

DUST SENSOR
SENSITIVITY SETTING

1. Sensitive
2. Normal (Default)
3. Insensitive
E R RO R D I S P L AY
Countermeasure
- Main PBA
- Motor BLDC

- Main PBA
- Motor BLDC

- Main PBA
- Dust Sensor
- Harness Dust Sensor
- Main PBA
- PBA Key
- Harness Key

- Main PBA
- Stepping Motor
T EST M O D E ( O N LY F O R C T )

DIVISION CONDITION REMARKS IMAGE

TEST Press and hold Allow within 30 seconds after
MODE Power + Air Quality power on
Button, 3 seconds
 06
INSTALLATION
GUIDELINES
 BEFORE INSTALLATION DURING INSTALLATION AFTER INSTALLATION

 plug the power cord into an outlet before

operating the product.
 turn on the product by pressing power button.
 check product function.
 test every button on product to check button
functionality
 Show how to use smart mode by pressing
 Open the product box power button to turn on then press clean mode
 locate the product at the place agreed by the button to select mode.
 Prepare tools for installation  explain sleep mode can only operates in smart
customer
 ask where to put the product.
 remove the plastic cover mode.
 suggest location of product. Preferably place  show how to use manual mode by pressing
 Open the front cover
away from flammable gas/ direct sunlight,
 Open front cover by pulling it from the sides. speed button. (can only operate in smart & eco
heat, moisture/ uneven or sloped floor.
 Remove packaging vinyl of a new double HEPA mode)
 remove any items that may obstruct  show how to use turbo mode by pressing clean
filter (H13) & double deodorization filter.
installation process
 Assemble the double HEPA filter (H13) & mode button to select turbo.
 clean the installation area if necessasry  show how to use three-way circulation mode.
double deodorization filter and place it on
 maintain a distance of at least 20 cm from Explain it comes in wide circulation, front
filter section.
walls & surrounding objects.
 Slot properly the front cover to close the circulation & top circulation.
product.  show setting auto moving algorithm ON/OFF
by pressing circulation mode button &
information button for more than 3 seconds.
 Show Haze Mode Operation ON/OFF setting by
pressing proper button
 Clean the workplace
ask customer politely either to leave or bring
back the product's box from customer house
 ask for customer's signature politely
 explain to customer product function
 P R EC AU T I O N

Keep distance from wall

Keep away from heater
keep away from flammable items
Keep away from heating element
Do not handle the power plug with a wet hand
Keep some distance from electrical appliances.
Do not put any foreign items
Do not use any chemical spray on the product
Do not stick sharp objects such as screwdriver into the sensor
Unplug the product if it is not to be used for a long time
Do not place the product nearby open window
Place the product on a stable ground
Keep away from oily environment
Never put the product in the water
Do not pull the cable when moving the product
THANK YOU