Sequence Putting and Removing Personal Protective Equipment Ppe
Sequence Putting and Removing Personal Protective Equipment Ppe
Table 14: Sequence for putting on and removing PPE, Australian Guidelines for the Prevention and
Control of Infection in Healthcare, 2019.
Put on PPE before patient contact and generally before entering the patient room
1. Remove gloves
• Outside of gloves is contaminated!
• Grasp outside of gloves with opposite gloved
hand; peel off.
• Hold removed glove in gloved hand.
• Slide fingers of ungloved hand under remaining
glove at wrist.
• Discard gloves in waste container.
3. Remove gown
• Gown front and sleeves are contaminated!
• Unfasten ties.
• Pull away from neck and shoulders, touching
inside of gown only.
• Turn gown inside out.
• Fold or roll into a bundle and discard.
Alternatively gloves and gown can be removed as one step. Then perform hand hygiene.
5. Remove mask
• Front of mask is contaminated−DO NOT
TOUCH!
• Grasp bottom, then top ties or elastic and
remove.
• Discard in waste container.