Scribd
Upload
16 views

slabs-all-cases

The document outlines the design specifications for a typical slab for Twin Lock Lascar Quarter, including dimensions, material properties, and load calculations. It details the factored moments and required reinforcement, ensuring compliance with IS 456 standards. Additionally, it checks for deflection, confirming that the effective depth is safe and within required limits.

Uploaded by

sridhara kumar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
16 views

slabs-all-cases

The document outlines the design specifications for a typical slab for Twin Lock Lascar Quarter, including dimensions, material properties, and load calculations. It details the factored moments and required reinforcement, ensuring compliance with IS 456 standards. Additionally, it checks for deflection, confirming that the effective depth is safe and within required limits.

Uploaded by

sridhara kumar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

By: Sridhar

Client: sridhar
Date:
Subject: DESIGN OF TYPICAL SLAB FOR TWIN LOCK LASCAR Qtr.

Long Span (L y ) Short Span (L x )


Panal size = 5.18 4.21
2
f ck = 20 N/mm
fy = 500 N/mm2

EDGE COND. 4 TWO ADJACENT EDGES DISCONT.


L y /L x = 1.24
(Assume D= = 125 mm
2
Dead load of the slab = 125 3.13 Kn/m

2
Floor finishes = 1.25 Kn/m
2
Live load = 2.50 Kn/m
. Total Dead+Live Load (w ) 6.88
2
Total Sercice Load (w ) = 6.88 Kn/m
As per IS 456
a x (-ve) = 0.0620 0.062
a x (+ve ) = 0.0466 0.0466
a y (-ve ) = 0.0470 0.047
a y (+ve) = 0.0350 0.035

The Factored Moments are Moment At 8 tor 10 tor 12 tor


2
in KNm in m mm c/c mm c/c mm c/c
Mx(-ve ) =a x (-ve) *w*l x *1.5 =
2
11.33 277 181 283 408
Mx(+ve) =a x (+ve) *w*l x 2 *1.5 = 8.52 204 246 384 554
My(-ve) =a y (-ve) *w*l x 2 *1.5 = 8.59 226 222 347 500
My(+ve) =a y (+ve) *w*l x 2 *1.5 = 6.40 166 304 474 683
min Ast 187.5 268 291 388
max spacing 300 300 300
6
d req = SQRT( (M u *10 )/(0.138*f ck *b)) = 64 mm
D prov = 125 mm
dx prov = 101 mm
dy prov = 93 mm
Provide 125 mm Thk 8 tor @ 180 mm c/c in Shorter direction &
8 tor @ 200 mm c/c in longer direction

Check for Deflection :

Percentage of Tension renforcement @ mid span = 0.28


Area of c/s of steel required
f s =0.58*f y * = 212 N/mm 2
Area of c/s of steel provided

Basic span/eff depth ratio for continuous slabs = 26.00

Modification factor = 1.67


Coefficient for max ratio of span/eff depth = 43

Effective Depth required = 97 < 101 mm


SAFE

You might also like