\\ Ascential Brochure

Vacuum line
Vacuum pumps and
pre-evacuation units
 Vacuum line

Vacuum pumps
Since 1940, Galileo’s vacuum pump line has provided top quality and cost effective vacuum pumps for
both industrial and scientific applications. Galileo’s dual stage rotary vane vacuum pumps are available in
two different series:

Vacsound Modular
Multi-purpose line for up to For wider pumping applications
28 m3/h (22 cfm) applications up to 80 m3/h

Galileo pumps feature a special anti-suck back Each pump is leak tested with helium and is
device that isolates the vacuum systems when the equipped with high flow gas ballasts to increase
pump is stopped, preventing any contamination of performance when operating with condensable
the product while being processed. gases or water vapor.

The temperature is kept constant in every A built-in trap limits the amount of oil that reaches
section of the pump thanks to a streamlined the exhaust port.
forced ventilation and lubrication system, which
results in achieving better performance, reduced Each Galileo pump can be supplied with a wide
maintenancedowntime and cost reductions. range of fittings and accessories such as outlet
filters, including high-efficiency options with oil
The items are manufactured with high precision vapor recovery.
tooling machines and high quality raw materials for
enhanced service life.

Oil mist filter

Type A Type B Type C

plastic type 25KF metal type metal type
high efficiency 25KF high efficiency 40KF

Vacsound and Modular vacuum pumps comply with CE standards.

2
 \\ Ascential Brochure

Increase your productivity with absolute accuracy. Even in

dangerous environments.

Vacsound Modular

Hz Units D18 D28 Hz

Displacement 50 l/min 350 510 D80

60 l/min 420 610 1342
60 cfm/min 14.5 21.5 1610
Pumping speed* 50 m3/h 17.4 26 57
Ultimate partial pressure mbar 10-4
10 -4
10-4
Ultimate total pressure mbar 2x10 -3
2x10 -3
2x10-3
Water vapor tolerance mbar 30 30 20
Water vapor capacity g/h 350 550 1000
Oil capacity min/max l 0.5/1 0.5/1 3.5/4.5
Motor power (3ph) 50 kW 0.55/0.6 0.55/0.6 2
60 kW 0.55/0.6 0.55/0.6 2.6
Weight (3ph) kg 30 30 102
Connection ports (in-out) DN 25KF 25KF 40KF

*According to PNEUROP 6602

Vacsound

Units A B C H L M N P R W

D18 mm 40 40 40 242 510 261 130 100 230 164

D20 mm 40 40 40 242 510 261 130 100 230 164

MODULAR

Units A B C H L M N P R W Z

D80 mm 75 40 95 375 800 380 210 160 390 255 450

OIL MIST FILTER

Units TypeA TypeB TypeC

Connection port DN 25KF 25KF 40KF

Weight Kg 0.16 2.12 4.3
Dimension A 70 197 252
B 132 223 345
C 55 75 130
D 127 159

galileotp.com 3
 Vacuum line

Vg502 Units Hz

Compatible sensor Pirani OG914, Pirani OG919,

The vacuum gauge Pirani Active head TPR280,
Strain Gauge 4÷20 mA up to 160 bar
Measuring channels Nr. 2 independent
Units of pressure measurement Pa, mbar, bar, μHg
Digital readout digit 5
Analog readout 50 dot circular bargraph
Analogical display scale Logarithmic
Dimension mm (inch) 96 x 96 x 205 (3.78 x 3.78 x 8)
Weight Kg (lbs) 1.1 (2.42)
Single phase power supply Vac 110 to 230
Power supply frequency Hz 50/60 ± 2%
Maximum absorbed power VA 40
Maximum working humidity 50% at 40 °C or 90% at 20°C
Working temperature °C (°F) 0 ÷ 50 (32 ÷ 122)
Storage temperature °C (°F) 20 ÷ 70 (-4 ÷ 158)
Communication channels Nr. 3 (full duplex RS232C, half duplex
RS485, Wi-Fi)
Relay signals (max 60V / 0.5A) OW set-point , NO (normally open)
(WiFi optional) HIGH set-point, NO
WORKING state, NO
PASS state, NO
FAIL state, NO
Input signals Start Cycle, NO
Abort Cycle, NO
Vacuum valve output 24VDC max 15VA
Gas ballast valve 24VDC max 15VA
Display updating rate s 0,3
Other digital outputs configuration Yes

The VG502 vacuum gauge has the capability The VG502 vacuum gauge can enable a gas
of measuring either vacuum (down to 10-3 mbar) ballast valve to clean the pump periodically when
or pressure (up to 160 bar), depending on the it’s contaminated with condensed vapors.
sensor that is installed (see technical data).
The VG502 also has also the following features:
VG502 displays the pressure read on channel A,
B or alternatively displays the most accurate read s Easy programming with touch panel or
by merging the two channels. remotely via PC with serial protocol RS232;
s Integration with RECDATA TJ V to manage
The VG502 can work as a stand-alone one or more VG in a carousel line to display
instrument or an integrated system with RecData vacuum curve, report and cycle. The
TJ V. The VG502 vacuum gauge can operate in connection of each vacuum gauge to the
one of three modes: PC with the software Recadata TJ V can be
done via RS485 or via Wi-Fi module/protocol;
s Set Point: standard working mode, the s Digital I/O for field/line communication (pass,
VG502 acts as a measurement instrument fail contact) and remote control (start, stop
s Time: the vacuum must be reached in a remote input).
selected time
s Pressure Rise Test: when the LOW set point
is reached, the interception valve is closed
and the rise curve monitored (optional mode)

4
 \\ Ascential Brochure

Since 1940
Galileo’s

Since 1940, Galileo’s Vacuum Pump line has provided

top quality and cost effective vacuum pumps for both
industrial and scientific applications

galileotp.com 5
 Vacuum line

Diagnovac/Vg
The highly flexible pumping groups
Diagnovac has been designed to meet the requirements
of pre-evacuation and drying phases for refrigerant units
in production lines with either fixed or mobile carousels.
Various models are available depending on the required pump
(all the Vacsound and Modular models can be fitted in the
Diagnovac), the number of inlets (one for Diagnovac 1, two
for Diagnovac 2) and the required supply voltage 3-phase.
Diagnovac can be supplied with the VG502 vacuum gauge
to perform a vacuum cycle (Diagnovac 1VG with one inlet,
Diagnovac 2VG with two inlets) that lasts until the evacuation
time or the set point.

With KVT (Kit Vacuum Test)

Pre-evacuation and leak detection unit for one refrigerant unit
This is the latest addition to Galileo TP’s growing family of pre-evacuation units for the refrigeration and air
conditioning industry.

The system performs leak detection with the pressure rise method, using an interception valve (Vacuum
Interception Valve) and a VG502 vacuum gauge connected to a PIRANI device (pressure sensor) on a single
refrigeration circuit. The LCD screen will feature the results of the cycle. If the vacuum is better than the
programmed set point, a “Pass” message will be displayed.

RecData TJ V
RecData TJ V is a PC software that manages the
vacuum stations of cooling units. The test is carried out
by collecting the vacuum level from VG502 vacuum
gauges either with fixed stations or mobile carousels.

The acquired curves are compared with a group of

reference values (minimum and maximum). The test
will have a positive result should the acquired curve values be included between the maximum and the
minimum values previously set.

It is possible to set different working cycles for different models and to manage the vacuum rise test.
The test may last from one second up to a maximum of 9 hours. All the performed tests are stored in a
SQL database.

RecData TJ V is completely integrated with the GEDA system for data acquisition and statistics, as well as
external supervision of the line.

6
 \\ Ascential Brochure

Pre-evacuation units

Diagnovac 1/2 Diagnovac VG 1/2 Diagnovac VG 1/2 + KVT

Pumping group composition Pumping group composition Pumping group composition

1 Dual stage rotary vane vacuum pump 1 Dual stage rotary vane vacuum pump 1 Dual stage rotary vane vacuum pump
(es: D18, D28) (es: D18, D28) (es: D18, D28)
2 Condensate separator NW25 2 Condensate separator NW25 2 Condensate separator NW25
3 Outlet filter NW25 Type A 3 Outlet filter NW25 Type A 3 Outlet filter NW25 Type A
(or high efficiency Type B oil mist filter (or high efficiency Type B oil mist filter (or high efficiency Type B oil mist filter
NW25) NW25) NW25)
4 PVC hoses 4 PVC hoses 4 PVC hoses
L=2, m (one or two) L=2,0m (one or two) L=2,0m (one or two)
With 1/4” female quick coupler type With 1/4” female quick coupler type With 1/4” female quick coupler type
Hansen® Hansen® Hansen®
5 Vacuum fittings 3 Vacuum gauge VG502 3 Vacuum gauge VG502
reducing Tee for n.° 1 hose, 115/230V 50÷60Hz 1ph 115/230V 50÷60Hz 1ph
(reducing cross for n.° 2 hoses)
6 Clamping and centering rings with OR 4 Pirani vacuum head OG919 4 Pirani vacuum head OG919
with 1/4” female quick coupler type with 1/4” female quick coupler type
Hansen® Hansen®
5 Outlet filter NW25 5 Outlet filter NW25
(or high efficiency oil mist filter NW25) (or high efficiency oil mist filter NW25)
6 PVC hoses 6 PVC hoses
L=2,0 m (one or two) L=2,0 m (one or two)
With 1/4 ” female quick coupler type With 1/4 ” female quick coupler type
Hansen® Hansen®
7 Vacuum fittings 7 Vacuum fittings
reducing Tee for n.° 1 hose, reducing Tee for n.° 1 hose,
(reducing cross for n.° 2 hoses) (reducing cross for n.° 2 hoses)
8 Clamping and centering rings with OR 8 Clamping and centering rings with OR

9 Vacuum interception valve

(VIV) 24 Vac max 8 W
The total dimension A with VIV is 710mm

Final vacuum of the systems: 7 Pa

galileotp.com 7
+39 055 722 13 58 | [email protected]

galileotp.com

Contact us today to discuss how

we can help tackle your toughest,
most complex challenges and unlock
the performance of your business.

About Ascential Technologies

Ascential Technologies tackles the most challenging problems where the

cost of failure is high.

We design, develop, and automate complex diagnostics, inspection, and

test processes across medical & life science, transportation, and test &
measurement end markets.

With 70+ years of experience, 2,300+ experts, and over 40 locations

across the globe, Ascential Technologies leverages the power of science
and technology to accelerate innovation and improve health and safety.