Scribd
Upload
34 views1 page

VSI-6

The Series 1000-X Industrial Electric Valve Actuators feature a torque output range of 443 in-lb to 22,127 in-lb and are designed with a robust die-cast aluminum housing that is watertight and corrosion-resistant. They include standard features such as thermal overload protection, adjustable limit switches, and a manual override, with an ambient temperature rating from -220F to +1400F. Optional features include various power options, adjustable torque switches, and feedback potentiometers.

Uploaded by

ahmed HOSNY
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
34 views1 page

VSI-6

The Series 1000-X Industrial Electric Valve Actuators feature a torque output range of 443 in-lb to 22,127 in-lb and are designed with a robust die-cast aluminum housing that is watertight and corrosion-resistant. They include standard features such as thermal overload protection, adjustable limit switches, and a manual override, with an ambient temperature rating from -220F to +1400F. Optional features include various power options, adjustable torque switches, and feedback potentiometers.

Uploaded by

ahmed HOSNY
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Series 1000-X

Industrial Electric
Valve Actuators

ON-OFF ROTARY ELECTRIC ACTUATOR FEATURES

Standard Design Features


Torque Output Range 443 in-lb to 22,127 in-lb
NEMA 4/4X and IP67 watertight, corrosion-resistant, powder coated, robust die
Housing
cast aluminum
Mounting ISO 5211 Standard mounting configurations
120VAC, single phase, 60Hz totally enclosed, non-ventilated, high starting
Electric Motors
torque, reversible capacitor run induction type with Class F insulation
Automatically resetting thermal switch permanently embedded in the motor
Thermal Overload Motor
winding - trips when the maximum winding temperature is exceeded and
Protection
resets once temperature normalizes
2x SPDT limit switches for Open and Close travel limit - easily adjustable.
Switches are cam operated, direct coupled to output for accurate positioning.
Auxiliary Limit Switches Adjustment of standard auxiliary limit switches is tied to end of travel switch
adjustment. Rated 15A/250VAC and 0.6A/125VDC. (3A/250VAC for 1005-X
model)
Mechanical dome type with high visibility red/yellow colored open/close
Position Indicator
indicator
Terminal Strip Heavy duty clamp type with Phillips head screw down, refer to wiring diagram
Two separate 1/2” NPT, one for power and one for control signal. Shipped with
PAGE 4

Conduit Entries removable cable gland adapters to prevent environmental damage during short
term storage
Alloy steel spur gears drive an aluminum bronze worm sector gear anti-
Power Gears
backdrive final stage.
The anti-backdrive worm gear prevents back driving, hunting, and eliminates
No Motor Brake Required
the need for a motor brake.
All drive gears are supported by ball bearings, high quality alloy steel sleeve
Bearings
bushings, and bronze sleeve bushings
All units shipped with an Allen Handle manual override. A declutchable hand-
Manual Override
wheel is an available option on 1010-X to 1250-X units
Ambient Temperature Rating -220F to +1400F (-300C to +600C)
Internal Heater Internal heater prevents condensation buildup inside actuator
Certifications and Approvals CE, NEMA 4/4X, NRTL, CSA File 226201, CSA C22.2 and UL 429

Optional Features
220VAC 220VAC 50/60Hz Power Option for all units
24VAC 24VAC 50/60Hz Power Option for models 1005-X thru 1040-X
24VDC 24VDC Power Option for select models
Torque Switches Adjustable torque limit switches for close direction of travel
Feedback Potentiometer Option for 1000ohm passive feedback potentiometer
4x SPDT limit switches for Open and Close travel limit - Independently adjust-
Auxiliary Limit Switches
able from end of travel limit switches
Declutchable handwheel override with speed handle (not available on 1005-X
Handwheel Override
models)

Valve Solutions, Inc


1205 Alpha Drive, Alpharetta, GA 30004
T: 770.740.0800 F: 770.740.8777
E: [email protected]

You might also like