Installation Instructions

Water flow system ice cube making machine

 Catalogue
Ice Maker Overview. . . . . . . . . . . . . . . .. .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Reception and Inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ... . . . . . . . . 1

ICEQ55Z ICEQ210Z Exterior Structure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Foot Installation and Foot Placement. . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . 3

Installation of Water Supply. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . .4

ICEQ55Z ICEQ210Z Installation Diagram. . ...... . . . . . . . . . . . . . . . . . . . . . . .5

Split Machine Installation Diagram . . . . . . . . . . . . .. .. . . . . . . . . . . . . . . . . . . 6

LCD Control Panel Operating Manual . . . . . . . . . .. . . . . . . .. . . . . . .. 7-14

Ice Thickness Adjustment Instruction . . . . . . . . . . . . . . . . . . . .. . . . . . . ..15

Routine Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . .. .16

Electrical Safety Matters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . .17

Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Ice Maker Work Steps. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

Fault Self-diagnosis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Fault Detection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Berore Calling for Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22

Other Language Instruction Manual. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Out-of-service machine treatment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24

 Ice MakerOverview
1.Our company's ice maker adopts advanced technology and
technique method, and the strict and comprehensive quality
inspection ensures the excellent performance.
2.The core component of the ice maker is compressor which adopts
the world famous brand, such as Embraco, Secop, Tecumseh.
Together with the reasonable configuration of the refrigeration
system, makes the performance of the ice maker more reliable and
the energy consumptionlower.
3.Food grade 304 stainless steel shell, elegant and durable,
corrosion resistant, easy to clean.
4.The refrigerating capacity of water-cooling type ice makeris stable,
it is not affected by ambient temperature. It can make ice leisurely
with enough output in hot summer.
5.Advanced industrial microcomputer control system can make ice
making and ice collecting process automatically. It has many kinds
of protection functions which makes the ice maker convenient and
safe to use.
6.Our company’s products have passed ISO9001-2008, CE, RoHS
certificates.

Receiving And Checking

Thank you for selecting our company's automatic ice maker. In order
to protect your legitimate rights and interests, please pay attention
to the following things when receiving and checking the machine:
1. The outer packing of the machine is intact.
2. Machine’s model is consistent with your purchased.
3. The appearance of the machine is in good condition.
4. The attached partsare complete.
5. The internal components of the machine are in good condition.

In the process of transportation,due to improper stacking or handling, thelubricating

oil in the compressor will flow into the refrigeration pipeline, resulting in a serious
lack of oil for the compressor. Once the electricity is switched on,the compressor will
be burned in a short time. Therefore, we strongly suggests that after the customer
receive our machine, place the machine in the right position for a day, so that the
lubricating oil can flow back to the compressor, then install and use the machine.

-1-
 ICEQ55Z ICEQ210Z

Model nameplate

Plastic door of ice storage bin

Display screen

Front panel

Supporting foot

Power switch
(optional)

Drain pipe Ice water inlet

(black) (white thread)

-2-
 Model label

Water cooling
configuration/ customization

Cooling water inlet （black thread)

Cooling water outlet （black thread)

Drain pipe Ice water inlet

(black) (white thread)

Foot Installation And Foot Placement

1. Screw the feet of the ice maker to the baseplate.
2. Each foot must be screwed up and tightened so as not to
bend.
3. Put the ice maker in a sturdy and flat position.
4.Adjust the height of the foot to make the ice maker level.
5. The ice maker is not suitable used in the outdoors. The
normal using ambient temperature is between 10-38 degrees
centigrade, and the water temperature is between 5-30
degrees. Our maximum ice production temperature is:
ambient temperature: 21 degrees, water temperature 10
degrees centigrade. High temperature will seriously reduce
the amount of ice production. We suggest that the client put
the ice maker in a room with cold air.

-3-
6. ice making machine should not be installed in the
environment without sewer and water seepage, and it is
strictly prohibited from high temperature equipment.

7. air-cooled ice making machines (such as refrigerators, ovens, etc.) rely on

air circulation to dissipate heat. So it is necessary to keep the space above
15cm to benefit the heat dissipation.

Installation of Water Supply

1.The ice maker must use drinkable normal atmospheric temperature
filtered water.
2.Water pressure of water supply must be controlled between
0.3~0.5MPa, if over pressure pressure reducing valve need to be
installed.Don’t make the water inlet hose be squeezed.
3.The two ends of the water inlet hose are 3 / 4 " internal thread
( 20mm ) and 1 / 2 " internal thread ( 15mm ) joints with silicone seal
washers, so no need to wind tape.
4. The water filter is equipped with a filter element, unscrewing it with a
filter wrench before using the water filter. Take out the filter element,
tearing up the packaging film of filter element, putting it back as it used
to be and screwing up it. Changing the filter element every half year in
the process of use.
5.Please notice that the filter cover has the water inlet and the water
outlet direction marks.
6.Connecting the joint of 3/4 "with the water inlet of the machine(white
3/4" outer thread), and connect the joint of 1/2 "with water supply pipe.
7.Water-cooled ice maker, added one inlet and one outlet joints of
3/4” external thread pipe, the black color distinguishes them from the
water intake of making ice.
8. The ice maker is drained by gravity. Therefore, it is necessary to
ensure that the drainage pipe has sufficient slope and drop.

-4-
 ICEQ55Z ICEQ210Z Installation

Pure water Tap water

Air cooled *Caution *Caution

ice maker

4/6' inlet pipe 4/4' inlet pipe

Sewer inlet
Ice water
Drain pipe The filter cover

Filter core must be taken out before Pure water Tap water
use, tearing off the packaging film and
tightening it back

Filter cartridge The filter tank

Cooling water inlet

Air cooled
ice maker

*Caution *Caution

Sewer Sewer The pipe joints on the machine have

signs，If there is a conflict, the mark on the
Drain pipe machine is the criterion. The white thread
eding interface must be the inlet of the water.
Ice water fe

*Caution：Mark swirls interfaces need wrapping tape. -5-

 Split Machine Installation Diagram
ICEM500X, ICEM1000X, ICEM2000X

1.The installation of the split machine shoul

d pay attention to the water cooling type
more than the condensation into the drain Master control part of split ice maker

age two joints,

2．The bottom of the ice storage tank has
a drain outlet at the bottom. First, the 4/6
outer thread connecting head in the Ice water inlet

fittings is screwed into the central hole at Cooling water outlet

the bottom of the ice storage bucket, and copper

then connected with the 4/6 hose, and Ice water outlet

finally exported to the sewer.

Cooling water inlet

pip e
Condensation water inlet
Ice water inlet pipe

ani ng dra in
pipe(water cooling)

d ra in
ag e bi n

e r c o n w a te r
Ic e st or

)
o l in g
Aut om atic cle

o
p i p e e n s a ti
(wat
d
Con

* Caution * Caution

*Caution

Ice water inlet

4/6'threaded joint (black) Screwed

Sewer into a central drainage holes at the
bottom of the ice storage bin
Sewer Sewer

The condenser drain pipe has pressure and cannot be co

nnected with other drains to prevent the case from flowi
ng into the machine and must be inserted into the sewe
r independently.

Master control part of

split ice maer
(Air cooled)
The unipolar filter presented by our company can not
meet the drinking water standard. Please buy and re
place it on your own!

The air condenser

Ice water feeding
interface (white)
*Caution：Mark swirls interfaces need wrapping tape.
Automatic cleaning
-6- drain interface (black)
 LCD Control Panel Operating Manual
(Available for some models)
General description : This is a fully automatic ice making machine, all programs of the
LCD control panel have been set up in the factory. Usually, the user just need to do
some simple operation. Please place the machine in the appropriate location and
connect to power supplies. (If your machine has red switch on the machine’s back
or left side, please turn on it. I=Turn on, O=Turn off) Then the LCD control panel will
light up, the machine will run automatically, the user need no any other operation. If
you want to stop the machine, just close the red switch.

Note: Unplug the power supplies after finishing the day's work .
Ⅰ. Button instruction
A. There are five tangibly buttons below the control
panel

Pictures Name Function

Turn on/off the machine and

On/Off button
set the program

Model button Adjust the running model

Clean/Set button Clean and set

Increase the thickness of ice

Schedule/+ button
and the duty time.

Reduce the thickness of ice

Light/- button and duty time,control the
light.
-7-
 water flow system ice maker

B. The exact instruction about the function of the buttons

a. On/Off button
1. Press it to turn off ice machine in the status of power ON .
2. Press it to turn on ice machine in the status of power OFF.
3. Press it to schedule time in the status of time schedule setting.
4. Press it to turn off the machine in the status of time schedule.
b. Clean/Set button
1. Press the button in the status of power OFF , releasing the button when it flashes, machine
works on manual clean.

2. Press the button in the status of manual clean, machine go to drain step and then enter into
rinsing process after drain finished. Press the button in the status of rinsing, machine will go
to drain and then go to next procedure.
3. Press the button goes to manual clean, in the status of ice freezing, ice harvest and ice
full .
c.Schedule/+ button
1. Press it to enter time schedule setting when power OFF.
2. In the status of time schedule setting, press the button to increase 10 minutes, long
pressing to increase time continuously.
3. In the status of setting, press the button to increase one of the parameter, long pressing to increase
continuously.
d. Light/- button
1. In the status of setting, press the button to reduce one of the parameter, long press to reduce
continuously.
2. In the status of time schedule setting, press the button to reduce 10 minutes, long press to reduce
continuously.
3. In the status of non set , press the button to turn on/off the blue light.
Ⅱ. LCD control panel status instructions (Drawing instruction)

-8-
1. Switch on: LCD control panel lights up.
2. Switch on time-delay:
Water inlet: Display time C00, icons of Clean, Freezing, Ice cube harvest and Ice full of
storage light up.
Switch on clean: Display time is cleaning time, Clean icon lights up.
Pressure balance: Icons of Clean, Freezing, Ice cube harvest and Ice full of storage light
up. If condenser sensor had fault, Fault icon lights up, Condenser sensor icon
lights up, temperature displays EE.

3. Manual clean: Clean icon flashes. Displays time is cleaning time.(It will not display
icon, if the programhas no cleaning function..

4. Ice freezing: Rreezing, Comp. and regarding icons light up.

Display time is ice freezing time. After entering the countdown program, it displays
remaining time for ice making. In the status of delayed shutting down, Freezing icon
flashes.
If condenser sensor had fault, Fault icon light on, Condenser sensor icon lights
up, temperature displays EE.
5. Ice harvest: Ice cube harvest icon light up. Display time is ice cube harvest time.
In the status of delayed shutting down , Ice cube harvest icon flashes.
If condenser sensor had fault, Fault icon lights up, Condenser sensor icon lights up,
temperature displays EE.

6. Ice full: Ice full of storage icon lights up. Display time is ice full time. All the load works
will be turned off.

Ice full of storage icon works with ice chute board. When the ice chute board close,
Ice full of storage icon lights up, Ice full of storage icon goes out when ice chute
board opens. No button pressed for 60 seconds, screen locked, screen lock icon lights
up. Press any key to unlock.
Ice full is released (compressor is on delayed status), Ice full of storage icon flashes, turn
on delay. If condenser sensor had fault, Fault icon light on, Condenser sensor
icon lights up, temperature displays EE.

-9-
7. Fault: Fault icon lights up, corresponding fault status icons light on. All the load
works will turn off.

8. Switch off: Displays OFF.

9. Schedule time setting: Time schedule icon lights up. Display time is the schedule time
to turn on the machine.

10. Schedule status: All icons of Clean, Freezing, Ice cube harvest, Ice full of
storage light up. Time schedule icon flashes. Displaying scheduled time
counts down.

11. Condenser fault, Fault icon lights up, Condenser sensor icon lights up, and the
machine working.

12. Ice chute board or ice full switch faults, Ice flip lights up, Fault icon flashes.

13. Overtime ice making fault, if it happens 10 times consecutively, Freeze overtime icon
lights Fault icon flashes.

14. Overtime ice harvest fault, if it happens 3 times consecutively, Harvest overtime icon
lights Fault icon flashes.

15. High temperature fault, (condensation temperature is over 65 degree Celsius),

High Temp. icon lights up and Fault icon flashes.

16. Water shortage fault, after 4 minutes water inputting continuously, water is still
not full, Water shortage icon lights up and Fault icon flashes.

17. High pressure fault, HP switch open (the function is invalid without HP switch),
High pressure icon lights up and Fault icon flashes.

-10-
Ⅲ. Several frequently-used procedures setting for your reference. Please operate as
the following steps when you need.
A. How to adjust the thickness of the ice?
Step 1.When the is on making ice model. Press the discretional one of the five buttons to
unlocked.

Step 2. Press Schedule/+ button, the position which displays temperature will flash “00”.

-11-
Step 3. Press Schedule/+ button and Light/- button to adjust. Press Schedule/+
button for one time，the position which displays temperature will appear “01” as
the following picture. It means the ice making time will be increased 1 min, the ice will
become thick.

Press Light/- button for one time，the position which displays temperature will
appear “-1” as the following picture. It means the ice making time will be reduced
1 min, the ice will become thin. After setting, you need no other operation, the
machine will resume making ice automatically.

-12-
B. How to clean the machine?
Step 1. Press the discretional one of the five buttons to unlocked.
Step 2. Press On/Off button, the control panel will appear 'OFF' as the following
picture.

Step 3. Press Clean/Set button, the control panel will display clean pattern.
Usually, 2 minutes to clean the machine is enough.

Step 4. Press Model button 3 times to back to making ice model.

-13-
 C. How to set the program when the ice storage is full?
When the ice storage is full, the control panel will display'full
ice‘pattern as the following picture.

Step 1. Use ice shovel to clean the ices which cover on the ice chute board.
Step 2. Press the discretional one of the five buttons to unlocked.
Step 3. Press On/Off button to turn off the machine, the control panel will
appear'OFF'. Step 4. Press On/Off button to turn on the machine, then press 3
times Model button to back to making ice model.

-14-
 Ice Thickness Adjustment Instruction

The ice thickness detector works as follows:

When the ice maker starts working, the pump will draw water from the sink to
the shower pipe. The water passes trough the pipe, then flows into the tank
from the top of the ice lattice.

When the water is circulating, the compressor works to cool down the ice
lattice. The water will gradually cool to 0 degree celsius. The ice will appear
and thicken in the ice lattice.

The narrow gap between the detector and the ice lattice will reduce to a
certain extent, the water which passes through the pipe comes into the gap
and contact with the metal detector, detector signal detects the circuit
control chip for more than 8 seconds, it means completing the process of
making ice. So the gap between the detector and the ice lattice is the key to
control the ice thickness.

Adjusting screw clockwise to increase the thickness of the ice, adjusting screw
counter-clockwise to reduce the thickness of the ice. Every adjustment
should not exceed half a lap, and you can see the effect of the ice after the
adjustment.

-15-
 Routine Cautions
1. When transportation and mobile location, the ice machine tilt shall not
exceed 45 degrees.
2. Ice machine, please use independent water source, and check regularly
to prevent water pressure is too low, fluctuations or filter clogging.
3. Do not store any sundries in the ice storage room, or freeze any food in
the ice storage room and keep the ice shovel clean.
4. Switch the ice storage bucket plastic door, should be light open and
light closed, don't beat box door, after taking the ice, please turn off the
sliding door of the ice storage bucket.
5. Ice machine should be far away from the heat source. It is strictly
prohibited to use in high temperature or low temperature environment. It
is necessary to avoid direct sunlight in order to avoid affecting the heat
dissipation of the machine.
6. It is forbidden to wash the surface of ice machine directly with water,
otherwise it may lead to short circuit, leakage and other faults.
7. After the ice machine is used for a period of time, if it is stopped for a
long time, it should be electrified every two months for four to six hours.

Electrical Safety Matters

1. Plug and pull plug is strictly prohibited when wet, the plug must be
unplugged before maintenance and cleaning work.
2. Must ensure that the socket is equipped with grounding wire, and
safe grounding
3. The electrical control system has more than 36V voltage, the use of
not free to open and touch. If necessary, please contact the
manufacturer or qualified professional and technical personnel.
4. The power connection should be marked according to the nameplate,
use the specified power supply, and determine the wire specifications
used in the connection circuit can meet the requirements. Please use
special power outlet and fuse if necessary.
5. When the ice machine is stopped, the power plug should be
unplugged or cut off the power supply.
-16-
 Maintenance
In order to improve the reliability and service life of the ice maker, and to
avoid the increase of the energy consumption coefficient of the ice
production, the maintenance and maintenance should be carried out
according to the requirements of this manual.
1. Often clean the environment around the ice maker to keep clean, do not
plug the ice machine in the case of ventilation shutters.

2. Cleaning of the shell can be cleaned with a neutral cleaning agent, and
then wipe clean with a rag which is made of soft material. Commercial
stainless steel cleanser and polishing agent can be used when necessary.
3. Filter element should be checked regularly. Most of the ordinary filter
element is replaced in half a year, and the senior core should be replaced on
time according to the description.

4. Water pipes can be washed directly when the water tank and the ice
storage barrel are cleaned. Do not let water pressure is too large, do not
directly flush the water pump and the above part of the ice, to prevent the
leaching circuit part.

5. Air-cooled ice machine condenser maintenance : three months to clean

an air-cooled condenser. A vacuum cleaner with a soft brush or a brush is
arranged in the direction of the fin to avoid the damage of the fin to affect
the refrigerating efficiency.

6. Maintenance of the wintering : in addition to turning off the water source

and power supply, the water tank of the ice machine is also needed, residual
water in the inlet and drain pipes.

If the scale of the ice machine is serious, or

Any maintenance of the ice machine is
the waterway is blocked, please call the after
not within the manufacture’s warranty.
-sale service telephone. There will be a charge
for door-to-door service.

Before cleaning and maintenance work, be

sure to turn off the water and power, pull The wind condenser fin edge is sharp,
out the plug. please be careful when cleaning.

The filter cartridge should be replaced

periodically.
-17-
 Ice Maker Work Steps
The working steps of the ice maker are divided into three parts :
1. The automatic cleaning of the ice machine ( once, time 2 minutes )
When each ice maker starts, the automatic 2 minute cleaning program is
automatically carried out to clean the floating objects in the ice grid and the
tank. In 2 minutes the sink uninterrupted water, pump operation. The user can
hear the noise of the pump work flow from the top of the ice grid down into
the sink, and then overflow from the sink, from the drain outlet of the ice
storage bucket.
2. Ice ( cycle work, the longest 40 minutes )
After the completion of automatic cleaning, the pump will delay 45 seconds to
start, and then the ice began. When making ice, the water pump works
continuously from above the ice grid to the sink, and the water will slowly
become cold until it freezes. Ice thickness is measured by the ice thickness
detector during the ice making process. When the thickness of the test is
reached, the program will turn to the de-icing step. If the gap of the ice
thickness detector is too large, it will be forced into the de-icing program after
more than 40 minutes of ice making time.
3. De-icing ( cycle work, up to 4 minutes )
In the de-icing procedure, ice will be heated, ice and ice grid will be the
connection will be melted, when the ice due to weight and can not be attached
to the ice grid, it will fall off, complete a de-icing process.
When the ice falls, the water plate will be turned over, and then the water
retaining plate will be reset due to the dead weight, and then the machine
starts to make ice again. When the ice bucket is too much ice, the ice block can
not be reset, and the control chip is judged to be full of ice and temporarily
shut down until the water retaining plate is reset.

Fault self-diagnosis
1. Pump -- can directly observe whether there is water from the ice grid
up, if there is no pump failure.
2. Refrigeration--after 10 minutes of ice making, the water in the sink will
be significantly cooler, and you can feel the water temperature directly by
touching the ice grid or running water.
3. Influent-- one by one in the automatic cleaning process can be
observed in the tank overflow pipe constantly flowing into the ice storage
tank. In the process of ice making, you can put your hand into the water
tank to feel the amount of water, the normal situation accounts for more
than half of the sink.

-18-
 Fault Possible Cause Solution

Poor contact of socket. Replace the socket.

Ice maker Remove the ice, the machine will run
does not start. Ice storage bin is full of ice. automatically.

The cover of ice tray does not reset. Adjust the cover to make it reset free.

The water supply has not been opened Recheck the water supply.
or not connected firmly.
Ice maker
shuts down Ice maker didn’t be placed horizontally. Adjust the feet to be horizontal.
after operation
High-voltage temperature control switch Open the front panel, clean the
action. condenser.
Open the front panel, clean the
Didn’t clean more than two months .
condenser.
The water temperature is too high
(Usually it happens in summer).
Lack of ice
Clean up the surrounding sundries and
production. The environment temperature is too high. use electric fan to makes the temperature
cool down and the air circulating.
The environment space is small or closed. Clean up the surrounding sundries to
make air circulating.
The water inlet valve fails and keeps open Replace the water inlet valve.
( the water tank is overflowing).
Improper adjustment of ice thickness Reset the ice thickness detector
detector.

The The water quality is poor. Install the filter, replace the filter element.
transparency
of ice cube is The water tank and ice tray is too dirty. Clean the ice maker and replace the
poor or the filter element.
shape of the
ice is The water inlet valve filter screen is dirty. Clean the water inlet valve filter screen.
incomplete.
Large amount of running water above Tighten silicon tube of water pump,
ice tray. regulate water flow.
The drain valve fails and keeps close Replace the drain valve.
( Split ice maker).
The ice cube The ice is too thick. Adjust the Ice thickness.
can not drop
from the ice Clear the probe and check the
tray. The ice detector is dirty and loose.
connection.
The ice maker placed instability, foot
Place the ice maker smoothly.
Excessive hangs in the air.
noises. The shell of the ice maker touch other
Avoid touching other objects.
objects.
The shell of The door of ice storage bin is Completely shut down the ice storage
the ice maker not completely closed. tank.
has condensed Working in a high temperature and humid Normal phenomenon.
water. environment.

-19-
 Before calling for service

If the ice maker is abnormal, please confirm the following contents before
making a phone call :
1. Is the water source supply of the ice maker normal?
The method of inspection is to loosen the ice water inlet ( 6” joints )
behind the machine, when loosening to a certain extent, the water will leak
out. The water source supply will be normal when the water is exuded for a
long time, otherwise, there is no water.
2. Whether the ice maker has been connected to the power supply or not?
The ice maker produced by our company is fully automatic without manual
operation. You just need to connect the power supply and open the red
switch on side of the back of the ice maker. Please let the person who
understand the electricity to check whether the ice maker is electrified ,
focus on checking the plug base.
3. Model and series No. of our ice maker.
There is model and series No. nameplate on the side panel of the machine.

Failure due to user’s reasons（such as no water supply, no

electricity supply, environmental factors, etc.）Door-to-door
service charges will be charged

When checking the water source, do not completely unscrew the

ice making inlet interface to prevent high pressure waterjetting.

Plastic parts of the ice maker do not belong to the scope of warranty.

-20-
 Other Language Instruction

1. Norwegian user manual: https://temptech.no/manualer-oginstallasjon/

2. Swedish user manual : https://temptech.se/manualar-ochinstallation
3. Finnish user manua : https://temptech.fi/kayttoohjeet-jaasennus/
4. Danish user manual : https://temptech.dk/brugervejledningog-
installation/

We take reservations about typing faults and if any problems occure,

please contact us at [email protected]

Out-of-service machine treatment

The insulating material between the metal shell and the ice storage
bin is combustible polyurethane foaming material. After the
machine is waste, please treat it according to the national or local
regulations on the treatment of combustible waste.

-21-
The instruction is the undivided part of the ice maker.
The user must keep it properly.