Package contents

Product name: Maestro EBook

Product Model numbers: Maestro-EBook11
Brand name: Evolve III
Power adapter (100V-240V)X TM
Quick guide
Important safety and legal information
Remove all components from the packaging and remove the packaging material,
including the protective film. Check to ensure that the delivery is complete.
If you find that there are missing or damaged components, contact customer service
immediately.

Technical specifications
Processor (CPU): Intel® Celeron® N3450Processor (up to 2.2GHz) quad core*
Operating system: Windows 10 Pro
RAM/Internal storage: 4GB/64GB
Graphics unit (GPU): Intel® HD Graphics 500 (C)*
Screen size: 11.6”
Display: TN display (1366*768; 16:9)
Camera: Front: 2MP
Interfaces: 1x Mini-HDMI®, 1x TF, audio out/MIC in (3.5mm), 1x USB2.0, 1x USB3.0,
1x SIM card slot.
Network: WIFI 802.11 b/g/n, Bluetooth 4.0
Card slot: micro SD (HC/XC) up to 256GB, TF

More: Hall-Sensor, Analogue-microphone, Stereo speaker

Size: 277mm x190.3 mm x17.8mm
Weight: approx.1000g
Material/Color: PC + ABS︱Cool Grey
Battery: Li-polymer (charging via DC IN)

Operation and storage

Temperatures: between 5℃ to 30℃
Relative humidity: of 30% to 70%

Quick guide

Charging the Notebook

Please charge your Notebook fully before using it for the first time.
Connect the DC plug on the supplied power adapter to the charging socket (DC IN)
on the Notebook.
Then plug the power adapter into a socket.
The charging LED lights up while the device is charging.
Only leave the power adapter connected to the socket until the battery of the
Notebook is fully charged. In addition, always disconnect the power adapter from the
Notebook when you are not charging the Notebook.

Turning on the Notebook for the first time

Bring the screen upwards until it is standing at a minimum angle of 90° to the
keyboard.
Press the on/off switch for about 5 seconds to switch on the Notebook. The setup
assistant will then appear on the screen.
Follow the setup assistant instructions to set up your Notebook.
During the start-up, the wizard prompts you to register for your Microsoft account. If
you do not yet have a Microsoft account, please set up one here.
After completion of the start-up, your Notebook is configured. This may take several
minutes to complete. Do not turn off the Notebook during this time !

Unlocking the display

As soon as the device has been set up (and every time it is subsequently switched on
and booted up), the lock screen appears, Press any key on the keyboard to unlock the
screen.
If your Notebook is password-protected, you must then enter the password.

Start menu
To display the start menu, click the Windows icon in the bottom left of the display or
press the the Windows button on the keyboard. Press the icon a second time to hide
the Start menu.
The Start menu consists of the classic navigation list (A) and a useful app area (B) to
the right of the navigation list.
Among other things, the navigation list includes a link to open Settings (cog wheel
icon).In the app area, you can pin apps and favorites in the form of live tiles and
organize them.
In the navigation list (A) you find a list of all installed apps in alphabetical order. An
alphabetic quick access to the navigation list appears when you click on a respective
first letter.

The Action Center

The Info Center is a bar with quick links to some important Notebook functions,
which you can either display or hide.
To access the Info Center click the memo symbol in the bottom fight-hand corner.

Activating WIFI and opening the browser

a. Call up Settings(see “Start menu”).
b In the settings, click “Network & Internet”.
c Click “ Wi-Fi” on the left in the next screen.
d Click the slider or the word “Off”. The word “On” now appears next to the
slider.The Notebook searches for all available for all available wireless networks
nearby and then displays them as a list (“Show available networks”).
e Click the network that you wish to connect to.
f Enter the network key (password) if necessary.
g . Click “Connect”. The Notebook connects to the selected network.

The button for launching the Internet browser can be found on the task bar at the
bottom of the display. Click the little blue “e” to launch the browser. To enter an
Internet address (URL), click the search bar displayed centrally at the top of the
window.

Reset
If the Notebook “freezes” and no longer responds, you can reset it. Please and hold
down then on/off switches off. Wait for about 20 seconds and then turn the
Notebook on normally.
Any files that have not been saved will be lost when the Notebook is reset.
Switching off the Notebook

Standby
Briefly press the on/off switch on the device to activate the standby mode. Press it
again quickly to take the Notebook out of standby mode.

Shutting down
Open the Start menu. Click“Ф” in the bottom area of the Start menu and then tap
“Shut down”. The Notebook shuts down.

Saving energy
Deactivate the WIFI function when it is not in use.
Only leave the power adapter connected to the socket until the Notebook’s battery is
fully charged. In addition, always disconnect the power adapter form the Notebook
when you are not charging the Notebook.
Reduce the display brightness under “System”→“Display” in the settings.
Activate standby mode or turn off the Notebook completely if you are not using the
Notebook.

General safety information

WARNING
Risk of multiple injuries due ton reduced physical, sensory or mental capabilities
and/or lack of knowledge or practical experience
Children and vulnerable individuals may only use the device under direct supervision.
Risk of electric shock or electrocution from live components
Do not insert objects into the device’s ventilation slots.
Do not open the power adapter.
Do not touch the power adapter if you hands are wet.
Do not short out the device and/or charger.

Fire hazard andor risk of burns from damaged or leaking batteries

Do not use or charge the device if the battery if damaged or leaking.
Do not use or charge the device if the battery is damaged or leaking.
Avoid skin contact with the device and/or battery if the battery is leaking. Wear
protective gloves if it is not possible to avoid touching the device/battery in such
cases.
Immediately wash your hands thoroughly in the event of skin contact with the
battery substrate.
If the battery substrate comes into contact with your eyes, rinse them out with
plenty of water and consult a physician immediately.

Risk of fire or explosion when using non-approved chargers and power adapters
Only use the included power adapter or on an equivalent power adapter to charge
the battery.
If the power adapter is defective, only exchange it for an equivalent power adapter.
Please note the information in the technical specifications of the power adapter in
the online user’s manual or contact customer service.

Risk of multiple injuries from slipping, tripping or falling

Do not expose the device and/or power adapter to vibrations and/or any form of
impact.
Do not drop the device and/or power adapter. Do not use the device/power adapter
if it has been dropped and/or is damaged. Have a qualified service technician check
the device/power adapter before restarting it.
Always ensure that the power cord is installed securely.
Do not allow the power cord to knot or kink.

Notes and practical tips on maintenance and repairs

WARNING
Risk of electric shock and electrocution from live components
Never open the casing of the device and/or the power adapter. No parts inside the
device require maintenance or cleaning.
The battery in the device should not be removed by the user. Do not disassemble the
battery, place objects into it or handle liquids near it. The battery could catch fire or
explode.
It is prohibited to repair or modify the device and/or power adapter. Failure to
comply with these instructions may void the warranty.
The device should only be serviced and repaired by a qualified service technician.
Contact customer service where repairs or servicing are required.
IC Caution:
RSS-Gen Issue 4 December 2014"&"CNR-Gen 4e Décembre 2014:
- English:
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) This device may not cause
interference, and (2) This device must accept any interference, including interference that
may cause undesired operation of the device.
- French:
Le présentappareilestconforme aux CNR d'Industrie Canada applicables aux appareils radio
exempts de licence. L'exploitationestautorisée aux deux conditions suivantes:
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareildoit accepter tout brouillageradioélectriquesubi, mêmesi le
brouillageest susceptible d'encompromettre le fonctionnement.

FCC Caution:

Any Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.

Specific Absorption Rate (SAR) information

SAR tests are conducted using standard operating positions accepted by the FCC with
the laptop transmitting at its highest certified power level in all tested frequency
bands, although the SAR is determined at the highest certified power level, the
actual SAR level of the laptop while operating can be well below the maximum value.
Before a new model laptop is a available for sale to the public, it must be tested and
certified to the FCC that it does not exceed the exposure limit established by the FCC,
tests for each laptop are performed in positions and locations as required by the FCC.