schedule of circuit details
schedule of circuit details
To be completed in every case Complete only if distribution board is not connected directly to the origin of the installation.
CIRCUIT DESCRIPTION .
Circuit RCD/
conductor size Overcurrent protection RCBO
(mm 2)
Circuit
ref
Circuit designation
Page 5 of 6
SCHEDULE OF TEST RESULTS CERTIFICATE NUMBER
EIC SITE DRAFT- RETURN ALL PAGES
Details of circuits and/or
installed equipment vulnerable TEST INSTRUMENTS USED .
to damage when testing
Serial Number Serial Number
RCD
impedance
Correct supply polarity confirmed Multi Functional
resistance
Phase sequence confirmed
Continuity Other
(where appropriate)
TEST RESULTS
Continuity RCD / RCBO
(Ω) Ring final circuits continuity Earth
Insulation resistance
(Ω) fault loop
R1 + R2 (MΩ)
Circuit (measured end to end) imped- Operating Times
or R2 ance Remarks
Ref
CPC- ZS At 5IΔn
At I Δn
R1 + R2 R2 L-L N-N
CPC L/L* L/E** (Ω) (ms)
(ms)
* (Record lowest value measured - Line/Line if applicable or Line(s)/Neutral) ** (Record lowest value measured – Line(s)/Earth or Neutral/Earth)
Tested by
Signature Name
Page 6 of 6
DISTRIBUTION BOARD CHART REFERENCE
Distribution Board (DB) Details of circuits and/or installed
Reference No equipment vulnerable to damage
Distribution Board when testing
Location
Distribution board is No of
Zs at DB Ipf at DB supplied from Phases
CONDUCTORS
WIRING 2 OVERCURRENT PROTECTIVE DEVICE MAXIMUM
CSA (MM ) MAX
TYPE NO OF ZS
CIRCUIT REF DISC RCD
DESCRIPTION (SEE POINTS SHORT- PERMITTED
REF TIME (MA)
CODE METHOD SERVED BS (EN) TYPE RATING CIRCUIT BY BS7671
LIVE CPC (S)
BELOW) NO (A) CAPACITY (Ω)
(KA)
Name of contractor
Address of contractor
Enrolment number