Smart 700 IE V5, Smart 1000 IE V5

Preface

Overview 1

Safety instructions 2
SIMATIC HMI
Security 3
HMI devices
Smart 700 IE V5, Smart 1000 IE V5 4
Mounting and connecting

Operating the device 5

Operating Instructions

Configuring the device 6

Commissioning a project 7

Maintenance and care 8

Technical specifications 9

Practical user example A

Technical Support B

Abbreviations C

01/2025
A5E53807433-AA

https://365electricalvn.com/category/automation-manual/
Legal information
Warning notice system
This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent
damage to property. The notices referring to your personal safety are highlighted in the manual by a safety alert
symbol, notices referring only to property damage have no safety alert symbol. These notices shown below are
graded according to the degree of danger.

DANGER
indicates that death or severe personal injury will result if proper precautions are not taken.

WARNING
indicates that death or severe personal injury may result if proper precautions are not taken.

CAUTION
indicates that minor personal injury can result if proper precautions are not taken.

NOTICE
indicates that property damage can result if proper precautions are not taken.
If more than one degree of danger is present, the warning notice representing the highest degree of danger will
be used. A notice warning of injury to persons with a safety alert symbol may also include a warning relating to
property damage.
Qualified Personnel
The product/system described in this documentation may be operated only by personnel qualified for the specific
task in accordance with the relevant documentation, in particular its warning notices and safety instructions.
Qualified personnel are those who, based on their training and experience, are capable of identifying risks and
avoiding potential hazards when working with these products/systems.
Proper use of Siemens products
Note the following:

WARNING
Siemens products may only be used for the applications described in the catalog and in the relevant technical
documentation. If products and components from other manufacturers are used, these must be recommended
or approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and
maintenance are required to ensure that the products operate safely and without any problems. The permissible
ambient conditions must be complied with. The information in the relevant documentation must be observed.

Trademarks
All names identified by ® are registered trademarks of Siemens Aktiengesellschaft. The remaining trademarks in
this publication may be trademarks whose use by third parties for their own purposes could violate the rights of
the owner.
Disclaimer of Liability
We have reviewed the contents of this publication to ensure consistency with the hardware and software
described. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the
information in this publication is reviewed regularly and any necessary corrections are included in subsequent
editions.

Siemens Aktiengesellschaft A5E53807433-AA Copyright © Siemens 2025.

Digital Industries Ⓟ 01/2025 Subject to change All rights reserved
Postfach 48 48
90026 NÜRNBERG
GERMANY

https://365electricalvn.com/category/automation-manual/
Preface

Purpose of the operating instructions

These operating instructions provide information based on the requirements defined by
IEC 62079 for documentation. This information relates to the HMI device, its storage,
transportation, place of use, installation, use and maintenance.
These operating instructions are intended for a variety of target groups. The following table
shows the chapters of these operating instructions that are of particular importance for the
respective target group.

Target group Chapter

All "Safety instructions"
Operators "Overview"
The operator operates and monitors the system "Operating the device"
during the process control phase.
Commissioning engineers All chapters.
The commissioning engineer integrates the HMI Depending on the use of the HMI device, cer-
device into the system and ensures the operating tain chapters may not be of relevance to the
capability of the HMI device for the process control commissioning engineer, e.g. the section
phase. "Maintenance and care."
Service technicians All chapters.
Service technicians rectify faults that occur during Depending on the use of the HMI device, cer-
the process control phase. tain chapters may not be of relevance to the
service technicians, e.g. the section "Mainte-
nance and care."
Maintenance technicians Maintenance and care
Maintenance technicians carry out servicing and
maintenance work during the process control
phase.

The WinCC flexible SMART online help contains additional information. The online help
contains instructions, examples and reference information in electronic form.

Scope
These operating instructions apply to the following Smart HMI devices:

Product name MLFB number

SIMATIC HMI Smart 700 IE V5 6AV6648-0EC11-3AX0
SIMATIC HMI Smart 1000 IE V5 6AV6648-0EE11-3AX0

Note
The firmware version must be V5.0.0.0 and later versions.

Smart 700 IE V5, Smart 1000 IE V5

Operating Instructions, 01/2025, A5E53807433-AA 3
https://365electricalvn.com/category/automation-manual/
Preface

Basic knowledge required

Knowledge of automation technology and process communication is necessary to
understand the operating instructions.
An understanding of the use of computers and operating systems is also required.

Illustrations and text highlighting

This manual contains figures of the described devices. The figures may deviate from the
supplied device in certain details.
The following graphical highlighting facilitates reading these operating instructions:

Graphical highlighting Description

If the instructions involve
several tasks, the individual
tasks are highlighted by a red
number circle.

A light blue highlight indicates

components and tools that are
required in the course of a
task.

Smart 700 IE is sometimes

shown in the figures as a rep-
resentation of all Smart Pan-
els.

Smart 700 IE V5, Smart 1000 IE V5

4 Operating Instructions, 01/2025, A5E53807433-AA

https://365electricalvn.com/category/automation-manual/
 Preface

The following text highlighting facilitates reading these operating instructions:

Text highlighting Scope

"Add screen" • Terms that appear in the user interface, for example, dialog
names, tabs, buttons, menu commands
• Input values, for example, limits, tag values
• Path information
"File > Edit" Operational sequences, for example, menu commands, shortcut
menu commands
<F1> Keyboard operation

Note information highlighted as follows:

Note
A note contains important information on described products and their handling or on a
section of this documentation.

Names of the hardware

These operating instructions describe the Smart IE V5 HMI devices. The term "HMI device" is
used synonymously for a "Smart IE V5 HMI device" in these instructions.

Names of the software

Configuration and runtime software have different names as follows:
• "WinCC flexible SMART" refers to the configuration software used to create an HMI project.
• The term "runtime" refers to the "WinCC flexible SMART Runtime" software running on the
HMI devices.
• "SMART LINE Assistant" refers to the software used to set up the VPN for HMI and PLC
devices.
• "SIMICAS" refers to the Siemens IoT service platform.

Trademarks
Names labeled with a ® symbol are registered trademarks of the Siemens AG. Other names
used in this documentation may be trademarks, the use of which by third parties for their
own purposes could violate the rights of the owner.
• HMI®
• SIMATIC®
• SIMATIC HMI®
• WinCC®
• SIMICAS®

Smart 700 IE V5, Smart 1000 IE V5

Operating Instructions, 01/2025, A5E53807433-AA 5
https://365electricalvn.com/category/automation-manual/
Preface

History

Edition Comment
01/2025 First Edition

Smart 700 IE V5, Smart 1000 IE V5

6 Operating Instructions, 01/2025, A5E53807433-AA

https://365electricalvn.com/category/automation-manual/
Table of contents

Preface ................................................................................................................................................... 3
1 Overview.............................................................................................................................................. 11
1.1 Product description ............................................................................................................ 11
1.2 Design of the HMI devices .................................................................................................. 13
1.3 Scope of delivery ............................................................................................................... 14
1.4 Accessories ........................................................................................................................ 14
2 Safety instructions ............................................................................................................................... 15
2.1 General safety instructions ................................................................................................. 15
2.2 Notes about usage ............................................................................................................. 16
3 Security ................................................................................................................................................ 19
3.1 Cybersecurity information .................................................................................................. 19
3.2 Data protection.................................................................................................................. 19
3.3 User access model ............................................................................................................. 21
3.4 Secure decommissioning ................................................................................................... 21
3.4.1 Securely removing data ..................................................................................................... 22
3.4.2 Recycling and disposal ....................................................................................................... 23
3.5 IoT certification.................................................................................................................. 23
3.6 Secure communication ...................................................................................................... 24
4 Mounting and connecting ................................................................................................................... 25
4.1 Preparations ...................................................................................................................... 25
4.1.1 Checking the package contents .......................................................................................... 25
4.1.2 Checking the operating conditions ..................................................................................... 25
4.1.3 Selecting a mounting position ............................................................................................ 25
4.1.4 Checking clearances .......................................................................................................... 27
4.1.5 Making the mounting cutout ............................................................................................. 27
4.2 Mounting the HMI device ................................................................................................... 29
4.3 Connecting the HMI device ................................................................................................ 31
4.3.1 Connection sequence ........................................................................................................ 31
4.3.2 Connecting the equipotential bonding circuit ..................................................................... 32
4.3.3 Connecting the power supply............................................................................................. 34
4.3.4 Connecting the configuration PC ........................................................................................ 35
4.3.5 Connecting the PLC or other field devices ........................................................................... 36
4.3.6 Connecting a USB device, micro SD card ............................................................................. 38
4.4 Installing SMART LINE IoT module ...................................................................................... 39
4.5 Switching on and testing the HMI device ............................................................................ 41

Smart 700 IE V5, Smart 1000 IE V5

Operating Instructions, 01/2025, A5E53807433-AA 7
https://365electricalvn.com/category/automation-manual/
Table of contents

4.6 Securing the cables ............................................................................................................ 42

5 Operating the device ........................................................................................................................... 43
5.1 Overview ........................................................................................................................... 43
5.2 General functions of the screen keyboard........................................................................... 45
5.3 The screen keyboards ........................................................................................................ 46
5.4 Entering data ..................................................................................................................... 47
6 Configuring the device ........................................................................................................................ 49
6.1 Overview ........................................................................................................................... 49
6.2 Switching display theme and language .............................................................................. 51
6.3 Home ................................................................................................................................ 52
6.4 Network ............................................................................................................................ 54
6.4.1 Changing the Ethernet parameters..................................................................................... 54
6.4.2 Enabling the Transfer channel ............................................................................................ 56
6.4.3 Configuring SMART LINE IoT module WIFI (CM01) .............................................................. 57
6.4.4 Configuring SMART LINE IoT module 4G (CM11) ................................................................ 61
6.5 System .............................................................................................................................. 63
6.5.1 System settings ................................................................................................................. 63
6.5.2 Printing test page .............................................................................................................. 65
6.5.3 Displaying HMI software license information ...................................................................... 66
6.6 Service/Commissioning ...................................................................................................... 67
6.6.1 Backup .............................................................................................................................. 67
6.6.2 Restore .............................................................................................................................. 68
6.6.3 OS update ......................................................................................................................... 69
6.6.4 Project Download .............................................................................................................. 70
6.7 Date/Time .......................................................................................................................... 71
6.8 IIoT .................................................................................................................................... 72
6.8.1 IIoT introduction ................................................................................................................ 72
6.8.2 Configuring IIoT ................................................................................................................. 75
6.9 Security ............................................................................................................................. 77
6.9.1 Setting the device password .............................................................................................. 78
6.9.2 Setting the remote password ............................................................................................. 80
7 Commissioning a project ..................................................................................................................... 81
7.1 Overview ........................................................................................................................... 81
7.2 Operating modes ............................................................................................................... 82
7.3 Data transmission options .................................................................................................. 83
7.4 Transfer ............................................................................................................................. 83
7.4.1 Overview ........................................................................................................................... 83
7.4.2 Transferring project by WinCC flexible SMART .................................................................... 84
7.4.3 Testing a project ................................................................................................................ 84
7.5 Backup and restore ............................................................................................................ 86
7.6 Updating the operating system .......................................................................................... 87

Smart 700 IE V5, Smart 1000 IE V5

8 Operating Instructions, 01/2025, A5E53807433-AA

https://365electricalvn.com/category/automation-manual/
 Table of contents

8 Maintenance and care ......................................................................................................................... 88

9 Technical specifications ....................................................................................................................... 89
9.1 Certificates and approvals .................................................................................................. 89
9.2 Electromagnetic compatibility ............................................................................................ 90
9.2.1 Emitted interference .......................................................................................................... 90
9.2.2 Immunity to interferences .................................................................................................. 90
9.3 Mechanical ambient conditions .......................................................................................... 90
9.3.1 Transport and storage conditions ....................................................................................... 90
9.3.2 Operating Conditions ......................................................................................................... 91
9.4 Climatic ambient conditions ............................................................................................... 91
9.4.1 Transport and storage conditions ....................................................................................... 91
9.4.2 Operating Conditions ......................................................................................................... 92
9.4.3 Climate diagram ................................................................................................................ 92
9.5 Protection classes .............................................................................................................. 93
9.5.1 Insulation test .................................................................................................................... 93
9.5.2 Protection against foreign objects and water ...................................................................... 93
9.6 Technical data ................................................................................................................... 94
9.6.1 Smart 700/1000 IE V5 ........................................................................................................ 94
9.6.2 SMART LINE IoT module ..................................................................................................... 96
9.7 Dimension drawings .......................................................................................................... 98
9.7.1 Dimension drawing of Smart 700 IE V5 .............................................................................. 98
9.7.2 Dimension drawing of Smart 1000 IE V5 ............................................................................ 99
9.7.3 Dimension drawing of SMART LINE IoT module WIFI (CM01) ............................................. 100
9.7.4 Dimension drawing of SMART LINE IoT module 4G (CM11) ............................................... 100
9.8 Rating plate ..................................................................................................................... 101
9.9 Ports description .............................................................................................................. 101
9.9.1 DC24V - X80 .................................................................................................................... 101
9.9.2 PPI / RS 422/485/232 - X10 ............................................................................................... 102
9.9.3 Ethernet (LAN) - X1 .......................................................................................................... 102
9.9.4 USB - X60 ........................................................................................................................ 103
9.10 Communication with PLC or other devices ........................................................................ 103
9.11 Scope of functions with WinCC flexible SMART ................................................................. 107
A Practical user example ....................................................................................................................... 111
A.1 Remote accessing to PLC using Local Ethernet Transmission ............................................. 111
A.2 Remote debugging devices in VPN ................................................................................... 114
A.3 Exchanging HMI data with Ali IoT platform ....................................................................... 119
A.4 Archiving and monitoring HMI tags in SIMICAS ................................................................. 125
B Technical Support .............................................................................................................................. 129
B.1 Service and support ......................................................................................................... 129
B.2 System events ................................................................................................................. 129
C Abbreviations .................................................................................................................................... 130

Smart 700 IE V5, Smart 1000 IE V5

Operating Instructions, 01/2025, A5E53807433-AA 9
https://365electricalvn.com/category/automation-manual/
Table of contents

Glossary ............................................................................................................................................. 131

Index .................................................................................................................................................. 134

Smart 700 IE V5, Smart 1000 IE V5

10 Operating Instructions, 01/2025, A5E53807433-AA

https://365electricalvn.com/category/automation-manual/
Overview 1
1.1 Product description

Smart IE V5 HMI device provides optimal choices and high-level functionality for small
automation systems.

Stronger hardware
• Equipped with high-performance dual-core CPU
• Extend RTC power-off retention up to 3 years

Brandnew outlook and mechanical design

• Support new serial port and micro SD card

Fresh UI/UX design

• Offer modern and user-friendly user interface

Enhanced capability
• Support extension IoT modules: 4G module, Wi-Fi module
• Support SIMICAS IoT connection for remote access and data maintenance
• Support JavaScript programming
• Support Freeport protocol communication

Smart 700 IE V5, Smart 1000 IE V5

Operating Instructions, 01/2025, A5E53807433-AA 11
https://365electricalvn.com/category/automation-manual/
Overview
1.1 Product description

• Support S7-200 SMART V3 UDT (User Defined Type)

• Support S7-200 SMART secure communication

Seamless compatibility
• Seamless compatible with Smart Panel V4 mounting cutout for smooth project migration

Smart 700 IE V5, Smart 1000 IE V5

12 Operating Instructions, 01/2025, A5E53807433-AA

https://365electricalvn.com/category/automation-manual/
 Overview
1.2 Design of the HMI devices

1.2 Design of the HMI devices

The figure below shows the design of the HMI devices using Smart 700 IE V5 as an example.

① Power supply connection ⑥ IoT module interface

② RS 422/485, 232 port ⑦ Display/touch screen
③ USB port ⑧ Mounting seal
④ Ethernet port ⑨ Micro SD card slot
⑤ Recesses for a mounting clip

The Ethernet port can be configured via the Control Panel or the WinCC flexible SMART
software.
The RS 422/485 port is configured via the WinCC flexible SMART software.

Smart 700 IE V5, Smart 1000 IE V5

Operating Instructions, 01/2025, A5E53807433-AA 13
https://365electricalvn.com/category/automation-manual/
Overview
1.3 Scope of delivery

1.3 Scope of delivery

The scope of delivery of the HMI device includes the following components:

Name Figure Quantity

HMI device 1

1 Accessory kit with According to the quantity required

mounting clips for mounting, in accessory kit

Power supply terminal 1, in accessory kit

1 OSS mini DVD

1.4 Accessories
Accessories are not included in the HMI device scope of delivery, but can be ordered on the
Internet under Industry Mall (http://mall.industry.siemens.com).

Smart 700 IE V5, Smart 1000 IE V5

14 Operating Instructions, 01/2025, A5E53807433-AA

https://365electricalvn.com/category/automation-manual/
Safety instructions 2
2.1 General safety instructions

NOTICE
The HMI device is approved for indoor use only.
The HMI device may be damaged if it is operated outdoors.
Operate the HMI device indoors only.

Working on the control cabinet

WARNING
The device constitutes open equipment on the back side
The device constitutes open equipment on the back side. This means that the device may
only be integrated in an enclosure or cabinet which provides front access for operating the
device. The enclosure, the cabinet or the electrical operating rooms must provide protection
against electric shock and the spread of fire. The requirements regarding the mechanical
strength must also be considered.
Access to the enclosure or cabinet in which the device is installed should only be possible by
means of a key or tool and for trained and qualified personnel.
Dangerous voltage
Opening the cabinet will expose high voltage parts. Contact with these parts could be fatal.
Must disconnect the cabinet from the mains before opening it.

High frequency radiation

Note
Unwanted operating states
High-frequency radiation, for example, from cellular phones, can trigger unwanted operating
states.

Smart 700 IE V5, Smart 1000 IE V5

Operating Instructions, 01/2025, A5E53807433-AA 15
https://365electricalvn.com/category/automation-manual/