Scribd
Upload
11 views

VI701-Vnet-IP Interface Card

The document provides specifications and functions for the Vnet/IP Interface Card model VI701, which connects a PC to the Vnet/IP system via a PCI slot. It supports a communication speed of 1000 Mbps and requires CAT5e cabling for connection. The card has various indicators for operational status and complies with PCI Bus Specification 3.0.

Uploaded by

saeid.hemmati1350
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
11 views

VI701-Vnet-IP Interface Card

The document provides specifications and functions for the Vnet/IP Interface Card model VI701, which connects a PC to the Vnet/IP system via a PCI slot. It supports a communication speed of 1000 Mbps and requires CAT5e cabling for connection. The card has various indicators for operational status and complies with PCI Bus Specification 3.0.

Uploaded by

saeid.hemmati1350
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

<<Contents>> <<Index>>

General
Specifications
Model VI701
Vnet/IP Interface Card R3
GS 33P06B10-31E

■ GENERAL ■ PARTS NAME AND FUNCTIONS


By installing the control bus interface card into the PCI RDY lamp
slot of the PC/AT compatible personal computer, the Lights when it diaghoses the card as normal.
computer is connected to Vnet/IP.
RCV lamp
Lights when it detects signals on a control bus.
■ FUNCTION SND lamp
Interface between the PCI bus and Vnet/IP Lights when it sends signals to a control bus.
Ethernet connector
■ SPECIFICATIONS Connects a CAT5e (Enhanced Category 5 cable)
For conforming standards of the CENTUM CS 3000
system, see Integration Production Control System
CENTUM CS 3000 Vnet/IP System Overview (GS
33P01B10-31E). RCV
BUS1

Communication Speed
RCV lamp
1000 Mbps Full Duplex
Ethernet connector SND BUS1

Connection Specifications SND lamp RDY

Cable: CAT5e (Enhanced Category 5 cable), UTP


RDY lamp RCV BUS2
Transmission: 1000Base-T compliance
Connector: RJ45 connector
Max. distance: 100 m (Distance between VI701 and
SND
Layer 2 switch) U H

Autonegotiation
PCI Bus Specifications
Applicable revision:
PCI Bus Specification 3.0 F01E.EPS
32 bit/33 MHz
Vnet/IP Interface Card (Front )
This card can be installed on the PCI-X slot, either.
Note: If this card is installed, the bus speed of the PCI-X
bus segment is 33 MHz. ■ MODEL AND SUFFIX CODE
Voltage
Model Description
Power supply voltage: 5 V
Signal voltage: 3.3 V/5 V VI701 Vnet/IP Interface Card
T01E.EPS
Current Consumption
Max. 2.5 A
Weight ■ ORDERING INSTRUCTIONS
0.2 kg Specify model.
External Dimensions
106.68 mm x 167.64 mm ■ TRADEMARKS
Regulartory Compliance • CENTUM is a registered trademark of Yokogawa
EMC Standards: Electric Corporation.
[CE Mark] • Other product and company names appearing in this
[C-Tick Mark] document are trademarks or registered trademarks of
their respective holders.

Yokogawa Electric Corporation GS 33P06B10-31E


2-9-32, Nakacho, Musashino-shi, Tokyo, 180-8750 Japan ©Copyrightt Sep.13,2004
Tel.: 81-422-52-5634 Fax.: 81-422-52-9802 1st Edition Sep.13,2004
Subject to change without notice.

You might also like