Ans. 0.

67L

Recent Exam G+12 and Unlimited in 2022

A: 150mm B: 100mm C: 125mm D: 75mm

Q2) The distance between the center of gravity of compression and center of gravity of tension of the
steel beams is called ______

A: Overall depth B: clear depth C: total depth D: Effective depth

Q3) In plate girder bending moment is primarily resisted by _____

A: Web Plate B: flange angle C: Flange plate D: All

Q4) Horizontal stiffeners are used in girders to prevent web buckling due to ____

A: bending B: shear C: point load D: diagonal cracks

Q5) Vertical stiffeners are used in plate girders to prevent web buckling due to ___

A: buckling B: load C: moment D: shear

Q6) Bearing stiffeners are used to prevent deformation against large_____

A: bending B: moment C: shear D: pointed loads.

Q7) The maximum allowable lateral displacement of the shoring system is ___

A: 20mm B: 30mm C: L/180 D: 40mm

Q8) The maximum deflection of shoring if the road is away more than 5m is ___

A: 30mm B: 25mm C: 50mm D: 40mm.

Q9) The Maximum deflection of shoring system if the road is adjacent or less than 5m ___

A: 25mm B: 20mm C: 40mm D: 30mm.

Q10) The minimum spacing of anchors in shoring system is ____

A: 1m B: 3m C: 1.5m D: 1.2m.

Q11) Maximum grout length for anchors in shoring is _____

A: 3m B: 5m C: 7m D: 10m.

Q12) The minimum depth of unplanned excavation for shoring system as per DM is ____

A: 1m B: 2m C: 3m D: 0.5m.

Q13) If the soil type is less firm and need water to retain than ____ piles are used in shoring.
A: Contiguous piles B: sheet C: secant D: any one

Q14) The correct statement about secant piles and contiguous piles is that____

A: All secant piles are having reinforcement

B: Contiguous piles are overlapped

C: Secant Piles are overlapped

D: None of above

Q15) If all the piles of the building foundations are of 75cm diameter than static load test is required
for _____ percent of the piles.

A: 2% B: 3% C: 5% D: 1%.

Q16) dynamic load test is required for _____ % of the piles in the foundation.

A: 1% B: 2% C: 100% D: 5%.

Q17) Sonic test for piles is required for at least _____ %

A: 1% B: 2% C: 5% D: 10%.

Q18) Integrity test is required for at least _____% of all the piles.

A: 10% B: 20% C: 50% D: 100%.

Q19) The minimum steel bars required in pile design to achieve the ductility As per DM is _____

A: 5% B: 3% C: 1% D: 0.5%

Q20) The minimum steel bars diameter for main steel and stirrups for piles are____

A: 10mm,8mm B: 10mm,10mm C: 16mm,12mm D: 12mm,10mm

Q21) The minimum pile spacing as per DM rules is _____

A: 1.5D B: 2D C: 3D D: 2.5D

Q22) The maximum out of position allowed for piles is _____

A: 7mm B: 25mm C: 50mm D: 75mm.

Q23) The Maximum limit for crack width due to tension load for tension piles is ____

A: 0.1mm B: 0.5mm C: 0.3mm D: 0.2mm

Q24) Cross hole sonic logging test is usually done if the diameter and length of piles is ___

A: 1m,15m B: 1.5m,20m C: 75cm, 20m D: 1m, 20m

Q25) Which of the following is not the grade of bolt used?(mostly repeated question)

A: 5.6 B: 8.8 C: 10.9 D: 6.6

A: H/300 B: H/400 C: H/500 H/600

Q27) the limit for inter storey lateral drift due to wind force is _____

Ans: H/400 to H/600

Q28) wind tunnel testing is required for the buildings as per DM rule with height more than____

A: 50m B: 90mm C: 100m D: 120m

Q29) In all cases, the designed wind pressure shall not be less than____ KN/m2

A: 2 B: 0.5 C: 1.5 D: 1

Q30) grouting of the PT slab tendons shall be done at least ____ days before removing shuttering.

A: 10 B: 5 C: 3 days D: 14

Q31) water to cement ratio is taken with respect to ____-

A: volume B: density C: weight dimension

Q32) in steel structure Eve connection is between _____

A: columns B: beam to beam C: beam to column D: roof to beam

Q33) Apex connection is between beam and beam.

Q34) solid blocks and blocks for load bearing wall shall have compressive strength not less than___

A: 12N/mm2 B: 10N/mm2 C: 7.5N/mm2 D: 9N/mm2

Q35) Hollow blocks and blocks for non-load bearing wall shall have strength not less than ____ N/mm2

A: 7.5 B: 7 C: 5 D: 6

Q36) the minimum yield strength fy of the Angles used in steel structure as per British standards is
____N/mm2

A: 355 B: 250 C: 300 D: 275

Q37) the recommended minimum thickness of the PT slab as per DM rule is

A: 100mm B: 150mm C: 175mm D: 200mm

Q38) the jacking force to stress the cables shall not exceed ____% of the total tendons tensile strength.

A: 50% B: 60 C: 70 D: 80%

Q39) the wall thickness of the metal duct used in PT slab tendons shall not be less than___

A: 2mm B: 1mm C: 0.5mm D: 0.4mm

Q40) grouts in tendons shall have a strength not less than strength of the concrete at ___ days
A: 3 days B: 7 days C: 14 D: 28 days

Q41) the minimum concrete clear cover for substructure if it has direct contact with soil is ___

A: 50mm B: 65mm C: 100mm D: 75mm

Q42) The concrete used for structural elements shall have compressive strength f’c not less than___

A: 40N/mm2 B: 30N/mm2 C: 28N/mm2 D: 20N/mm2.

Q43) plate girders are considered as shallow if the depth of the plate girder is less than ____

A: 900mm B: 700mm C: 500mm D: 750mm

Q44) the web plate is provided with stiffeners when the ratio of the clear depth to thickness of the web
is greater than _____

A: 58 B: 75 C: 68 D: 85

Q45) web buckling due to shear will not happen ie no need of stiffeners when d/tw<85

Q46) When building is completed than shoring beams are cut at level of ____ in case of adjacent plot.

A: 1m B: 2m C: 3m D: 5m.

Q47) The most common type of shoring system used in UAE is____

A: Secant piles B: sheet piles C: wall D: I beam or soldier piles

Q48) Minimum overlap length between secant piles is_____

A: 25mm B: 50mm C: 75mm D: 100mm

Q49) The maximum angle of excavation is ______degrees

A: 20 B: 25 C: 35 D: 40

Q50) Minimum distance from the edge of plate to the center of bolt is ____

A: 2.5D B: 2D C: 1D D: 1.5D

Q51) The hydrogeological model for dewatering must be prepared for at least ____ below the bottom of
the excavation.

A: 50m B: 40m C: 25m D: 20m

Q52) The permeability is usually measured in units of _____

A: N/m B: N/min C: kg/s D: m/s