Scribd
Upload
16 views

technical

The document provides a detailed summary of ASTM standards for various types of piping and sheet/plate materials, including chemical and mechanical requirements. It lists specific grades along with their respective chemical compositions, tensile strength, yield strength, and hardness. This information is crucial for ensuring the quality and compliance of materials used in construction and manufacturing.

Uploaded by

oscar.bernalortega
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
16 views

technical

The document provides a detailed summary of ASTM standards for various types of piping and sheet/plate materials, including chemical and mechanical requirements. It lists specific grades along with their respective chemical compositions, tensile strength, yield strength, and hardness. This information is crucial for ensuring the quality and compliance of materials used in construction and manufacturing.

Uploaded by

oscar.bernalortega
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

Pipe Fittings, Sheets, Plates, Stainless Steel, Steel Plates, Stainless Steel Round Bar Chemical, Alloy Steel

Round Bar Chemical, Carbon Steel Round Bar ... Page 1 of 3

About Us | Products | Quality Assurance Plan | Technical Details | Client List | Third Party Inspection | Sitemap

TECHNICAL DETAILS

SUMMARY OF THE MAIN ASTM STANDARDS GENERALLY USED FOR PIPING


Chemical Requirements Percent (%) Mechanical Requirements
Tensile Impact test at
ASTM Grade C Mn P S Si Yield Strength Elong mini
Ni Cr. Mo Cu Others Strength
max Max Max Max Max Mini-MPa/Psi % C F
Mini-MPa/Psi
Types A 0.25 0.95 0.05 0.06 0.40 max 0.40 max 0.15 max 0.40 max 0.08 max 330-48000 205-30000 36
A 53
B 0.30 1.20 0.05 0.06 0.40 max 0.40 max 0.15 max 0.40 max 0.08 max 415-60000 240-35000 29.5
A 0.25 0.27-0.93 0.035 0.025 0.10 mini 0.40 max 0.40 max 0.15 max 0.40 max 0.08 max 330-48000 205-30000 L35-T25
A 106 B 0.30 0.29-1.06 0.035 0.025 0.10 mini 0.40 max 0.40 max 0.15 max 0.40 max 0.08 max 415-60000 240-35000 L30-T16.5
C 0.35 0.29-1.06 0.035 0.025 0.10 mini 0.40 max 0.40 max 0.15 max 0.40 max 0.08 max 485-70000 275-40000 L30-T16.5
TP 304 0.08 2.00 0.040 0.030 0.75 8.00-11.0 18.0-20.0 515-75000 205-30000 L35-T25
TP 304L 0.035 2.00 0.040 0.030 0.75 8.00-13.0 18.0-20.0 485-70000 170-25000 L35-T25
TP 310S 0.08 2.00 0.045 0.030 0.75 19.0-22.0 24.0-26.0 0.75 max 515-75000 205-30000 L35-T25
TP 316 0.08 2.00 0.040 0.030 0.75 11.0-14.0 16.0-18.0 2.00-3.00 515-75000 205-30000 L35-T25
A 312
TP 316L 0.035 2.00 0.040 0.030 0.75 10.0-15.0 16.0-18.0 2.00-3.00 485-70000 170-25000 L35-T25
TP 317L 0.035 2.00 0.040 0.030 0.75 11.0-15.0 18.0-20.0 3.00-4.00 515-75000 205-30000 L35-T25
TP 321 0.08 2.00 0.040 0.030 0.75 9.00-13.0 17.0-20.0 5C<Ti0.70% 515-75000 205-30000 L35-T25
TP 347 0.08 2.00 0.040 0.030 0.75 9.00-13.0 17.0-20.0 10C<Cb+Ta<1.00% 515-75000 205-30000 L35-T25
3 0.19 0.31-0.64 0.025 0.025 0.18-0.37 3.18-3.82 450-65000 205-35000 L30-T20 -100 -150
4 0.12 0.50-1.05 0.025 0.025 0.18-0.37 0.47-0.98 0.44-1.01 0.40-0.75 Ai:0.40-0.30% 415-60000 240-35000 L30-T16.5 -100 -150
6 0.30 0.29-1.06 0.025 0.025 0.10 mini 415-60000 240-35000 L30-T16.5 -45 -50
A 333
7 0.19 0.90 0.025 0.025 0.13-0.32 2.03-2.57 450-65000 240-35000 L30-T22 -75 -100
8 0.13 0.90 0.025 0.025 0.13-0.32 8.40-9.60 690-100000 515-75000 L22 -195 -320
9 0.20 0.40-1.06 0.025 0.025 1.60-2.24 0.75-1.25 435-63000 315-46000 L28 -75 -100
P1 0.10-0.20 0.30-0.80 0.025 0.025 0.50 0.44-0.65 380-55000 205-30000 L30-T20
P2 0.10-0.20 0.30-0.61 0.025 0.025 0.10-0.30 0.50-0.81 0.44-0.65 380-55000 205-30000 L30-T20
P5 0.15 0.30-0.60 0.025 0.025 0.50 4.00-6.00 0.45-0.65 415-60000 205-30000 L30-T20
P9 0.15 0.30-0.60 0.025 0.025 0.25-1.00 8.00-10.0 0.90-1.10 415-60000 205-30000 L30-T20
P11 0.15 0.30-0.60 0.025 0.025 0.50-1.00 1.00-1.50 0.44-0.65 415-60000 205-30000 L30-T20
A 335 P12 0.15 0.30-0.61 0.025 0.025 0.50 0.80-1.25 0.44-0.65 415-60000 205-30000 L30-T20
P15 0.05-0.15 0.30-0.60 1.15-1.65 0.44-0.65 415-60000 205-30000 L30-T20
P21 0.15 0.30-0.60 0.025 0.025 0.50 2.65-3.35 0.80-1.06 415-60000 205-30000 L30-T20
P22 0.15 0.30-0.60 0.025 0.025 0.50 1.90-2.60 0.87-1.13 415-60000 205-30000 L30-T20
P91 0.08-0.12 0.30-0.60 0.020 0.010 0.20-0.50 0.40 max 8.00-9.50 0.85-1.05 N0.30-0.70%Ai0 585-85000 415-65000 L20
.04%max//0.06-0.10
0.18-0.25
TP 304 0.08 2.00 0.045 0.030 0.75 8.0-10.50 18.0-20.0 -
TP 310S 0.08 2.00 0.045 0.030 0.75 19.0-22.0 24.0-26.0 - Class 1 : Double welded pipes & full Radiography
TP 316 0.08 2.00 0.045 0.030 0.75 10.0-14.0 16.0-18.0 2.0-3.0 Class 2 : Double welded no Radiography
Class 3 : Single welded full Radiography
A 358 TP 316L 0.030 2.00 0.045 0.030 0.75 10.4-14.0 16.0-18.0 2.0-3.0
Class 4 : Single welded full Radiography root pass
TP 317L 0.035 2.00 0.045 0.030 0.75 11.0-15.0 18.0-20.0 3.0-4.0 without addition of filler metal
TP 321 0.08 2.00 0.045 0.030 0.75 9.0-12.0 17.0-19.0 - N0.10 max Class 5 : Double Welded sport Radiography
TP 347 0.08 2.00 0.045 0.030 0.75 9.0-13.0 17.0-19.0 - Cb+TA10xC/10

http://www.metsteels.com/technical.html 03/12/2009
Pipe Fittings, Sheets, Plates, Stainless Steel, Steel Plates, Stainless Steel Round Bar Chemical, Alloy Steel Round Bar Chemical, Carbon Steel Round Bar ... Page 2 of 3

SUMMARY OF THE MAIN ASTM STANDARDS GENERALLY USED FOR SHEETS / PLATES
Chemical Requirements Percent (%) Mechanical Requirements
ASTM Grade Elong Hardness
C Mn P S Si Tensile Strength Yield Strength
Ni Cr. Mo Cu Others mini
max Max Max Max Max Mini-MPa(Ksi) Mini-MPa(Ksi) Brinell Rockwell
%
304 0.08 2.00 0.45 0.030 0.75 8.00-10.5 18.0-20.0 515-75 205-30 40 202 92
304L 0.030 2.00 0.45 0.030 0.75 8.00-12.0 18.0-20.0 485-70 170-25 40 183 88
310S 0.08 2.00 0.45 0.030 0.75 19.0-22.0 24.0-26.0 515-75 205-30 40 217 95
316 0.08 2.00 0.45 0.030 0.75 10.0-14.0 16.0-18.0 2.00-3.00 515-75 205-30 40 217 95
A240 316L 0.030 2.00 0.45 0.030 0.75 10.0-14.0 16.0-18.0 2.00-3.00 485-70 170-25 40 217 95
317L 0.030 2.00 0.45 0.030 0.75 11.0-15.0 18.0-20.0 3.00-4.00 485-70 170-25 40 217 95
321 0.08 2.00 0.45 0.030 0.75 9.00-12.0 17.0-19.0 5(C+N) < Ti < 0.70% 515-75 205-30 40 217 95
347 0.08 2.00 0.45 0.030 0.75 9.00-13.0 17.0-19.0 10C < Cb+Ta < 1.10% 515-75 205-30 40 217 92
409 0.08 1.00 0.40 0.030 1.00 - 10.5-11.75 - 6 x C / 0.75 Ti max 448-65 241-35 25 183 75
Class 1 Class 2 Class 1 Class 2
2 0.05-0.021 0.55-0.80 0.035 0.040 0.15-0.40 0.50-0.80 0.45-0.60 380-550 486-620 230 310 22 Max201HB Max92HRB
5 0.15 0.30-0.60 0.04 0.030 0.50 4.00-6.00 0.45-0.65 415-585 515-690 205 310 18 max202HB Max92HRB
A 387 7 0.15 0.30-0.60 0.030 0.030 1.00 6.00-8.00 0.45-0.65 415-585 515-690 205 310 18 max217HB Max95HRB
Class 1 9 0.15 0.30-0.60 0.030 0.030 1.00 8.00-10.0 0.90-1.10 415-585 515-690 205 310 18 max217HB Max95HRB
Class 2 11 0.04-0.17 0.40-0.65 0.035 0.040 0.50-0.80 1.00-1.50 0.45-0.65 415-585 515-690 240 310 22 max217HB Max95HRB
12 0.04-0.17 0.40-0.65 0.035 0.040 0.15-0.40 0.80-1.15 0.45-0.60 380-550 450-585 230 275 22 max217HB Max95HRB
21 0.04-0.17 0.30-0.60 0.035 0.035 0.50 2.75-3.25 0.90-1.10 415-585 515-690 205 310 18 max201HB Max92HRB
22 0.05-0.17 0.30-0.60 0.035 0.035 0.50 2.00-2.50 0.90-1.10 415-585 515-690 205 310 18 max201HB Max92HRB
55 0.22 0.90 0.035 0.04 0.15-0.40 380-515 / 55-75 205-30 27
60 0.27 0.90 0.035 0.04 0.15-0.40 415-550 / 60-80 220-32 25
A515
65 0.31 0.90 0.035 0.04 0.15-0.40 450-585 / 65-85 240-35 23
70 0.33 1.20 0.035 0.04 0.15-0.40 485-620 / 70-90 260-38 21
55 0.20 0.60-1.20 0.035 0.04 0.15-0.40 380-515 / 55-75 205-30 27
60 0.23 0.85-1.20 0.035 0.04 0.15-0.40 415-550 / 60-80 220-32 25
A516
65 0.26 0.85-1.20 0.035 0.04 0.15-0.40 450-585 / 65-85 240-35 23
70 0.28 0.85-1.20 0.035 0.04 0.15-0.40 485-620 / 70-90 260-38 21
Class 1 0.24 0.70-1.35 0.035 0.040 0.15-0.40 0.25 max 0.80 max 0.35 max 485-620 / 70-90 345-50 22
A537
Class 2 0.24 0.70-1.35 0.035 0.040 0.15-0.40 0.25 max 0.80 max 0.35 max 550-690 / 80-100 415-60 22

IS-2062-92 STEEL FOR GENERAL STRUCTURAL PURPOSES


Tensile Yield Strength (Min) Std. test
% Chemical Composition %Elin gauge
Strength Mpa Piece charpy
Grade Designation (Min) length 5.56 Bend Test
C Mn S P Si C.E. V Notch Impact
<20mm 20-40min >40min OSo
max max max max max max Kg/mm2 Energy Joule min
A FE410WA 0.23 1.5 0.050 0.050 - 0.42 41.8 250 240 230 23 3T -
2T for less
than 25 mm
B FE410WB 0.22 1.5 0.045 0.045 0.40 0.41 41.8 250 250 230 23 2T-3T
3T for more
than 25 mm
C FE410WC 0.20 1.5 0.040 0.040 0.40 0.39 41.8 250 250 230 23 2T 27

IS-2002-62 STEEL PLATES FOR BOILERS


Chemical Composition Tensile-Test Elongation
c Si P S Tensile Strength Yield Strength
Designation Test Piece % min
max max max max Mpa Mpa
5.65 √So 26
IS 2002-1 0.18 0.10-0.35 0.040 0.040 362-442 540
4 √So 30
5.65 √So 25
IS 2002-2A 0.20 0.10-0.35 0.050 0.050 412-491 491
4 √So 29
5.65 √So 20
IS 2002-2B 0.22 0.10-0.35 0.050 0.050 510-608 491
4 √So 24

http://www.metsteels.com/technical.html 03/12/2009
Pipe Fittings, Sheets, Plates, Stainless Steel, Steel Plates, Stainless Steel Round Bar Chemical, Alloy Steel Round Bar Chemical, Carbon Steel Round Bar ... Page 3 of 3

ASTM A479 STAINLESS STEEL ROUND BAR CHEMICAL & PHYSICAL PROPERTIES
ASTM Tensil Yield Elongation Hard-
C Mn Si S P Cr Ni Mo Other Redu. In Area. (%)
GRADE Psi(MPa) Psi(MPa) Strip / Round ness
A479 0.08 2.00 1.00 0.030 0.045 18.0 8.0 75000 30000
- 30 - 40
TP 304 max max max max. max. 20.0 10.5 (515) (205)
A479 0.08 2.00 1.00 0.030 0.045 16.0 10.0 2.0 75000 30000
30 - 40
TP 316 max max max max. max. 18.0 14.0 3.0 (515) (250)
A479 0.035 2.00 1.00 0.030 0.045 18.0 11.0 3.0 75000 30000
30 - 40
TP 317L max max max max max 20.0 15.0 4.0 (515) (250)
A479 0.08 2.00 1.00 0.030 0.045 24.0 19.0 75000 30000
- 30 - 40
TP 310 max max max max max 26.0 22.0 (515) (205)
A479 0.04 2.00 1.00 0.030 0.045 17.0 9.0 Cb-BxC 75000 30000
30 - 40
TP 347H 0.10 max max max max 19.0 13.0 -13.0 (515) (205)
479 2.00 1.00 0.030 0.045 17.0 9.0 5(C+N)<Ti 75000 30000
0.08 30 - 40
TP 321 max max max max 19.0 12.0 <0.70% (515) (205)

ASTM A182 ALLOY STEEL ROUND BAR CHEMICAL & PHYSICAL PROPERTIES
ASTM Tensil Yield Elongation Hard-
C Mn Si S P Cr Ni Mo Other Redu. In Area. (%)
GRADE Psi(MPa) Psi(MPa) Strip / Round ness
182 F 11 0.10 0.30 0.50 0.04 0.04 1.0 0.44 70000 40000
- - 20 143-207 30
Class 2 0.20 0.80 1.0 max max 1.50 0.65 (45.46) (27.05)
A 182 F22 0.05 0.30 0.50 0.04 0.04 2.0 0.87 75000 45000
- - 20 156-207 30
Class 3 0.15 0.60 max max max 2.50 1.13. (52.52) (31.7)
0.15 0.30 0.50 0.03 0.03 4.0 0.5 0.44 70000 40000
A 182 F5 - 20 143-217 35
max 0.60 max max max 6.0 max 0.65 (48.45) (27.05)
0.15 0.30 0.50 0.03 0.03 8.0 0.90 85 55 179-217
A 182 F9 - - 20 40
max 0.60 1.00 max max 10.0 1.10 (56.65) (380) (BHN)

IS-1875 ASTM A105 CARBON STEEL ROUND BAR CHEMICAL & PHYSICAL PROPERTIES
ASTM Tensil Yield Elongation Hard- Redu. In Area.
C Mn Si S P Cr Ni Mo Other
GRADE Psi(MPa) Psi (MPa) Strip / Round ness (%)
0.35 0.60 0.35 0.50 0.040 70000 36000 30-Strip
A 105 - - - - 187 max 30 Round
max 1.05 max max max (485) (250) 22-Round
Cu-0.4 max
0.30 1.35 0.15 0.040 0.035 0.30 0.40 0.12 Cb-0.02 70-95 36 20 / 16
A LF2 22 / 30 36
max max 0.30 max max max max max max (485-655) (250) (-45.6o)
Va-0.3 max

Designed & Hosted by : MID Promoted b

http://www.metsteels.com/technical.html 03/12/2009

You might also like