Scribd
Upload
14 views

Lab Equpment

The document outlines the details regarding the construction of a medical college, including a list of required lab equipment and their availability status. It specifies quality assurance measures for materials and testing procedures at the site or designated laboratories. Annexures A and B provide comprehensive lists of equipment and instruments necessary for field testing and quality assurance.

Uploaded by

Zamin khan
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
14 views

Lab Equpment

The document outlines the details regarding the construction of a medical college, including a list of required lab equipment and their availability status. It specifies quality assurance measures for materials and testing procedures at the site or designated laboratories. Annexures A and B provide comprehensive lists of equipment and instruments necessary for field testing and quality assurance.

Uploaded by

Zamin khan
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

Lab Equipment’s Details

Date:

1. Name of work: Construction of Medical College:

2. Agency :

3. List of Equipment’s as per Annexure A&B (Copy enclosed)

4. Status : Mark (✓) for available


Mark (X) for not available

5. Photographs of lab:

6. Suggestion:
QUALITY ASSURANCE PLAN
c. Makes of all materials shall be as specified in the Contract. In case specified make is
not available or some better alternate material is available in the market, same shall
be intimated to HO for substitution with financial implications.
d. All materials shall be tested either at Laboratory set up at site or at designated
External Laboratory.

3 ANNEXURE”A”: LIST OF EQUIPMENTS FOR FIELD TESTING LABORATORY


1. Balances
i. 7 Kg to 10 kg Capacity with accuracy 10 gm – Electronic
ii. 500 gm Capacity with accuracy 1 gm – Electronic
2. Set of weights
3. Spring Balance
4. Beakers
5. Oven - Electrically Operated Thermostatically controlled up to 110 0C – Sensitivity 1
0
C
6. Sieves – as per IS 460 – 1962
i. IS Sieves - 450 mm Internal dia , of sizes 100 mm, 80mm, 63mm, 50mm,
40mm, 31.5 mm, 25mm, 20mm, 16mm, 12.5mm, 10mm, 6.3mm, 4.75mm,
complete with lid and pan.
ii. IS Sieve – 200 mm Internal dia ( brass frame) consisting of 3.35mm ,
2.36mm, 1.18mm, 600 microns, 425 microns, 300 microns, 212 microns, 150
microns, 90 microns, 75 microns, with lid and pan.
7. Sieve Shaker
8. Equipment for Slump Test –
a. Slump Cone
b. Steel Plate 60cm x 600cm
c. Tamping rod 16 mm dia 600 mm long bullet pointed
d. Steel Scale
e. scoop
9. Screw gauge
10. Vernier Caliper
11. Wire Gauge –( Circular Type) disc
12. Graduated Measuring Cylinder – Capacity 500 ml – 3 Nos
13. Enamel Trays ( for Efflorescence test of Bricks )
300 mm x 200 mm x 40 mm – 2 Nos
14. 100 ton capacity Compression Testing Machine – for concrete cube and Bricks
testing
15. For making cube specimens for compressive strength
a. 15cm x 15cm x 15cm cube moulds – minimum 18 nos or as per site
requirements
b. 16 mm Tamping rods
16. Steel Tape – 3 m
17. Steel scale – 12”

VSPL/PMC/QAP Page - 3
QUALITY ASSURANCE PLAN
4 ANNEXURE “B”: FIELD TESTING INSTRUMENTS
1. Steel Tape – 3m
2. Vernier Caliper
3. Micrometer Screw Gauge
4. A good quality Plumb bob
5. Spirit level – minimum 30 cm long both for Horizontal and Vertical
6. Scale – Steel – 12”
7. Long Nylon thread
8. Wire gauge (Circular Type) disc
9. Rebound hammer for testing Concrete
10. Magnifying glass
11. Screw Driver 30 cm long
12. Plastic bags for taking samples
13. Moisture meter for Timber
14. Earth Resistance Test – for Electrical work
15. Meggar - for Electrical work
16. Sledge Hammer
17. Ball pin Hammer

VSPL/PMC/QAP Page - 4

You might also like