Severe Duty Motors

Information
General
IEEE 841, 1 thru 250 Hp NEMA 143T thru 449T IP56
Three Phase,
Totally Enclosed, Applications: Petro-chemical, pulp and paper, cement, aggregate mining
and other process industries requiring premium efficient motors designed,
460 Volts

Single Phase
manufactured and tested to exceed IEEE 841-2009 TEFC motor standards for

Motors
extreme severe duty service.
Features: Meets and/or exceeds all requirements of IEEE Std. 841-2009
including: Totally enclosed cast iron construction, Lower vibration design, Inpro
Seals and Positive Lubrication System with oversize bearings on both ends,

Industrial Motors
General Purpose
Stainless Steel nameplates, Terminal lugs on motor leads, Corrosion resistant
epoxy finish, NEMA Premium efficiency, Class F insulation with a Class B
temperature Rise, 1.15 service factor and 5 year warranty. Final test and vibration
results provided with motor. Motors are marked for Div.2/Zone 2, Class I locations
and are designed to meet 200° C @ 1.0 Service Factor. Inverter Ready design with
speed range and Inverter T. Code nameplate information, see chart on page 51 for
specific motor information.

Severe Duty
Motors
NEMA Catalog List Mult. “C” Aprx. Full Load Full Load
Hp RPM Enclosure Voltage Notes (a)
Frame Number Price Sym. Dim. Wt. (lb) Efficiency Amps
Foot Mounted
143T TEFC ECP83580T-4 1,043 SD 12.88 60 84 460 1.4 1
3600
143T TENV ENCP83580T-4 994 SD 11.37 56 84 460 1.3 1
1 143T TEFC ECP83581T-4 1,145 SD 12.88 69 87.5 460 1.5 1
1800

Large AC
Motors
143T TENV ENCP83581T-4 1,087 SD 11.37 60 87.5 460 1.5 1
1200 145T TEFC ECP83582T-4 1,228 SD 12.88 69 82.5 460 1.7 1
3600 143T TEFC ECP83583T-4 1,120 SD 12.88 69 85.5 460 2 1
1 1/2 1800 145T TEFC ECP83584T-4 1,165 SD 12.87 73 88.5 460 2.1 1
1200 182T TEFC ECP83667T-4 1,414 SD 15.93 114 87.5 460 2.5 1
3600 145T TEFC ECP83586T-4 1,229 SD 12.88 78 86.5 460 2.4 1

Washdown Duty
2 1800 145T TEFC ECP83587T-4 1,217 SD 12.87 78 88.5 460 2.8 1

Motors
1200 184T TEFC ECP83664T-4 1,537 SD 15.93 130 88.5 460 3.2 1
3600 182T TEFC ECP83660T-4 1,465 SD 15.93 116 88.5 460 3.4 1
3 1800 182T TEFC ECP83661T-4 1,541 SD 15.93 116 89.5 460 4.1 1
1200 213T TEFC ECP83764T-4 2,143 SD 19.50 165 89.5 460 4.5 1
3600 184T TEFC ECP83663T-4 1,805 SD 15.93 132 89.5 460 5.6 1
5 1800 184T TEFC ECP83665T-4 1,570 SD 15.93 127 89.5 460 6.6 1

Explosion Proof
1200 215T TEFC ECP83768T-4 2,215 SD 19.50 193 89.5 460 7.1 1

Motors
3600 213T TEFC ECP83769T-4 2,356 SD 19.50 179 91.7 460 8.6 1
7 1/2 1800 213T TEFC ECP83770T-4 1,978 SD 19.50 199 91.7 460 9.5 1
1200 254T TEFC ECP82276T-4 3,195 SD 24.78 343 91 460 10.5 1
3600 215T TEFC ECP83771T-4 2,508 SD 19.50 225 91 460 11.3 1
10 1800 215T TEFC ECP83774T-4 2,342 SD 19.50 231 91.7 460 12.2 1
1200 256T TEFC ECP82332T-4 4,079 SD 24.78 359 91.7 460 14.1 1

Pump Motors
3600 254T TEFC ECP82394T-4 3,264 SD 24.78 308 91.7 460 17 1
15 1800 254T TEFC ECP82333T-4 3,015 SD 24.78 317 92.4 460 17.6 1
1200 284T TEFC ECP84100T-4 4,712 SD 27.93 447 92.4 460 20 1
3600 256T TEFC ECP84106T-4 3,742 SD 24.78 328 91.7 460 22 1
20 1800 256T TEFC ECP82334T-4 3,260 SD 24.78 350 93 460 23.1 1
1200 286T TEFC ECP84102T-4 6,350 SD 27.93 442 92.4 460 25 1
3600 284TS TEFC ECP84107T-4 4,575 SD 26.56 430 91.7 460 28.5 1
HVAC Motors

25 1800 284T TEFC ECP84103T-4 4,228 SD 27.93 441 93.6 460 29 1

1200 324T TEFC ECP84111T-4 6,692 SD 30.66 638 93 460 32 1
3600 286TS TEFC ECP84108T-4 5,480 SD 26.56 442 91.7 460 33 1
30 1800 286T TEFC ECP84104T-4 4,979 SD 27.93 545 93.6 460 35 1
1200 326T TEFC ECP84117T-4 8,709 SD 30.66 637 93 460 38.6 1
3600 324TS TEFC ECP84109T-4 7,498 SD 29.16 626 92.4 460 44 1
40 1800 324T TEFC ECP84110T-4 6,629 SD 30.66 629 94.1 460 46 1
Farm Duty

1200 364T TEFC ECP84308T-4 10,662 SD 33.49 927 94.1 460 49.4 1
Motors

(a) See notes on inside back flap.

All ratings are 1.15 service factor at 40°C ambient.
All ratings meet the intent of IEEE-45 for weather protection, and are suitable for use in a 50°C ambient with a 1.0 service factor.
■ Cast Iron Frame
­39
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: [email protected]
 Severe Duty Motors
Information
General

IEEE 841, Three Phase, Totally Enclosed, 460 Volts

NEMA Catalog List Mult. “C” Aprx. Full Load Full Load
Hp RPM Enclosure Voltage Notes (a)
Frame Number Price Sym. Dim. Wt. (lb) Efficiency Amps
3600 326TS TEFC ECP84114T-4 7,821 SD 29.16 623 93 460 55 1
Single Phase

50 1800 326T TEFC ECP84115T-4 7,783 SD 30.66 679 94.5 460 57 1

Motors

1200 365T TEFC ECP84312T-4 11,355 SD 33.49 928 94.1 460 61.7 1
3600 364TS TEFC ECP84310T-4 11,558 SD 31.37 905 95 460 65.1 1
60 1800 364T TEFC ECP84314T-4 10,335 SD 33.49 913 95 460 68 1
1200 404T TEFC ECP84403T-4 14,718 SD 38.32 1271 95 460 69 1
3600 365TS TEFC ECP84313T-4 12,802 SD 31.37 1045 94.5 460 80.7 1
75 1800 365T TEFC ECP84316T-4 12,019 SD 33.49 971 95.4 460 85.9 1
Industrial Motors
General Purpose

1200 405T TEFC ECP84404T-4 17,827 SD 38.20 1327 94.5 460 86.8 1
3600 405TS TEFC ECP84402T-4 15,341 SD 35.19 1330 95 460 110 1
1800 405T TEFC ECP84400T-4 16,043 SD 38.32 1299 95.4 460 112 1
100
444T TEFC ECP84409T-4 19,609 SD 44.75 1940 95 460 119 1
1200
444T TEFC ECP84909T-4 19,609 SD 44.75 1933 95 460 119 1, 99
444TS TEFC ECP84412T-4 17,941 SD 40.98 1968 95 460 137 1
3600 444TS TEFC ECP84412T-4E 17,941 SD 40.88 1679 95.4 460 137 1, 56
Severe Duty

444TS TEFC ECP84912T-4 17,941 SD 40.98 1968 95 460 137 1, 99

Motors

125 444T TEFC ECP84410T-4 18,198 SD 44.75 2020 95.4 460 144 1
1800 444T TEFC ECP84410T-4E 18,198 SD 44.62 1746 95.8 460 139 1, 56
444T TEFC ECP84910T-4 18,198 SD 44.75 1779 95.4 460 144 1, 99
1200 445T TEFC ECP84411T-4 22,257 SD 44.75 2083 95 460 146 1
445TS TEFC ECP84413T-4 20,617 SD 40.98 2053 95 460 164 1
3600 445TS TEFC ECP84413T-4E 20,617 SD 40.88 1910 96.2 460 164 1, 56
Large AC

445TS TEFC ECP84913T-4 20,617 SD 40.98 2049 95 460 164 1, 99

Motors

445T TEFC ECP84406T-4 21,521 SD 44.75 2184 95.8 460 169 1

1800
150 445T TEFC ECP84906T-4 21,521 SD 44.75 2175 95.8 460 169 1, 99
447T TEFC ECP844156T-4 24,739 SD 48.24 2536 95.8 460 170 1
447T TEFC ECP844156TR-4 25,964 SD 48.24 2615 95.8 460 170 1, 5
1200
447T TEFC ECP849156T-4 24,739 SD 48.24 2598 95.8 460 170 1, 99
Washdown Duty

447T TEFC ECP849156TR-4 25,964 SD 48.24 2615 95.8 460 170 1, 5, 99

3600 447TS TEFC ECP84416T-4 27,256 SD 44.48 2433 96.2 460 213 1
Motors

447T TEFC ECP84407T-4 25,892 SD 48.24 2582 96.2 460 223 1

1800
447T TEFC ECP84407TR-4 27,119 SD 48.24 2676 96.2 460 223 1, 5
200 449T TEFC ECP844206T-4 32,865 SD 53.24 3125 95.8 460 225 1
449T TEFC ECP844206TR-4 34,092 SD 53.24 3108 95.8 460 225 1, 5
1200
449T TEFC ECP849206T-4 32,865 SD 53.24 3085 95.8 460 225 1, 99
Explosion Proof

449T TEFC ECP849206TR-4 34,092 SD 53.24 3108 95.8 460 225 1, 5, 99

Motors

449TS TEFC ECP844252T-4 43,915 SD 49.48 2790 96.2 460 266 1

3600
449TS TEFC ECP849252T-4 43,915 SD 49.48 2798 96.2 460 266 1, 99
449T TEFC ECP84408T-4 33,052 SD 53.24 2959 96.2 460 276 1
250 449T TEFC ECP84408TR-4 34,246 SD 53.24 2995 96.2 460 276 1, 5
1800
449T TEFC ECP84908T-4 33,052 SD 53.24 2971 96.2 460 276 1, 99
449T TEFC ECP84908TR-4 34,246 SD 53.24 2995 96.2 460 276 1, 5, 99
Pump Motors

1200 449T TEFC ECP844256T-4 46,128 SD 53.24 3125 95.8 460 287 1
C-Face, Foot Mounted
143TC TEFC CECP83580T-4 1,087 SD 13.38 63 84 460 1.4 1
3600
143TC TENV CENCP83580T-4 1,039 SD 12.00 61 84 460 1.3 1
1 143TC TEFC CECP83581T-4 1,190 SD 13.38 71 87.5 460 1.5 1
1800
143TC TENV CENCP83581T-4 1,130 SD 12.00 64 87.5 460 1.5 1
1200 145TC TEFC CECP83582T-4 1,273 SD 13.38 69 82.5 460 1.7 1
HVAC Motors

3600 143TC TEFC CECP83583T-4 1,164 SD 13.38 71 85.5 460 2 1

1 1/2 1800 145TC TEFC CECP83584T-4 1,212 SD 13.38 75 88.5 460 2.1 1
1200 182TC TEFC CECP83667T-4 1,461 SD 16.69 108 87.5 460 2.5 1
3600 145TC TEFC CECP83586T-4 1,277 SD 13.38 80 86.5 460 2.4 1
2 1800 145TC TEFC CECP83587T-4 1,262 SD 13.38 78 88.5 460 2.8 1
1200 184TC TEFC CECP83664T-4 1,681 SD 16.69 120 88.5 460 3.2 1
(a) See notes on inside back flap.
Farm Duty

All ratings are 1.15 service factor at 40°C ambient.

Motors

All ratings meet the intent of IEEE-45 for weather protection, and are suitable for use in a 50°C ambient with a 1.0 service factor.
■ Cast Iron Frame
Red Catalog Number indicates NEW Product.

­40 Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: [email protected]

 Severe Duty Motors

Information
General
IEEE 841, Three Phase, Totally Enclosed, 460 Volts
NEMA Catalog List Mult. “C” Aprx. Full Load Full Load
Hp RPM Enclosure Voltage Notes (a)
Frame Number Price Sym. Dim. Wt. (lb) Efficiency Amps
C-Face, Foot Mounted (continued)

Single Phase
3600 182TC TEFC CECP83660T-4 1,552 SD 16.69 121 88.5 460 3.4 1

Motors
3 1800 182TC TEFC CECP83661T-4 1,644 SD 16.69 120 89.5 460 4.1 1
1200 213TC TEFC CECP83764T-4 2,246 SD 20.23 209 89.5 460 4.5 1
3600 184TC TEFC CECP83663T-4 1,886 SD 16.69 139 89.5 460 5.6 1
5 1800 184TC TEFC CECP83665T-4 1,653 SD 16.69 131 89.5 460 6.6 1
1200 215TC TEFC CECP83768T-4 2,298 SD 20.23 227 89.5 460 7.1 1
3600 213TC TEFC CECP83769T-4 2,445 SD 20.23 179 91.7 460 8.6 1

Industrial Motors
General Purpose
7 1/2 1800 213TC TEFC CECP83770T-4 2,094 SD 20.23 178 91.7 460 9.5 1
1200 254TC TEFC CECP82276T-4 3,311 SD 25.28 337 91 460 10.5 1
10 3600 215TC TEFC CECP83771T-4 2,595 SD 20.23 225 91 460 11.3 1
1800 215TC TEFC CECP83774T-4 2,531 SD 20.23 231 91.7 460 12.2 1
1200 256TC TEFC CECP82332T-4 4,268 SD 25.28 347 91.7 460 14.1 1
15 3600 254TC TEFC CECP82394T-4 3,549 SD 25.28 306 91.7 460 17 1
1800 254TC TEFC CECP82333T-4 3,465 SD 25.28 316 92.4 460 17.6 1

Severe Duty
1200 284TC TEFC CECP84100T-4 5,162 SD 27.93 448 92.4 460 20 1

Motors
20 3600 256TC TEFC CECP84106T-4 4,025 SD 25.28 328 91.7 460 22 1
1800 256TC TEFC CECP82334T-4 3,666 SD 25.28 356 93 460 23.1 1
1200 286TC TEFC CECP84102T-4 6,756 SD 27.93 467 92.4 460 25 1
25 3600 284TSC TEFC CECP84107T-4 5,490 SD 26.56 433 91.7 460 28.5 1
1800 284TC TEFC CECP84103T-4 5,145 SD 27.93 452 93.6 460 29 1
1200 324TC TEFC CECP84111T-4 7,609 SD 30.66 608 93 460 32 1

Large AC
30 3600 286TSC TEFC CECP84108T-4 6,395 SD 26.56 442 91.7 460 33 1

Motors
1800 286TC TEFC CECP84104T-4 5,892 SD 27.93 485 93.6 460 35 1
1200 326TC TEFC CECP84117T-4 9,622 SD 30.66 633 93 460 38.6 1
40 3600 324TSC TEFC CECP84109T-4 8,505 SD 29.16 640 92.4 460 44 1
1800 324TC TEFC CECP84110T-4 7,637 SD 30.66 638 94.1 460 46 1
1200 364TC TEFC CECP84308T-4 11,670 SD 33.44 889 94.1 460 49.4 1

Washdown Duty
50 3600 324TSC TEFC CECP84114T-4 8,831 SD 29.16 670 93 460 55 1
1800 326TC TEFC CECP84115T-4 8,790 SD 30.66 683 94.5 460 57 1

Motors
1200 365TC TEFC CECP84312T-4 12,362 SD 33.44 920 94.1 460 61.7 1
60 3600 364TSC TEFC CECP84310T-4 12,655 SD 31.37 899 95 460 65.1 1
1800 364TC TEFC CECP84314T-4 11,434 SD 33.49 906 95 460 68 1
75 3600 365TSC TEFC CECP84313T-4 13,898 SD 31.37 992 95 460 80.7 1
1800 365TC TEFC CECP84316T-4 13,119 SD 33.49 992 95.4 460 85.9 1

Explosion Proof
C-Face, Footless

Motors
3600 143TC TENV VENCP83580T-4 985 SD 12.00 56 84 460 1.3 1
1
1800 143TC TENV VENCP83581T-4 1,063 SD 12.00 58 87.5 460 1.5 1
3600 143TC TEFC VECP83583T-4 1,153 SD 14.56 75 85.5 460 2 1
1 1/2
1800 145TC TEFC VECP83584T-4 1,199 SD 14.56 76 88.5 460 2.1 1
3600 145TC TEFC VECP83586T-4 1,264 SD 14.56 83 86.5 460 2.4 1
2
1800 145TC TEFC VECP83587T-4 1,250 SD 14.56 79 88.5 460 2.8 1

Pump Motors
3600 182TC TEFC VECP83660T-4 1,536 SD 16.69 116 88.5 460 3.4 1
3
1800 182TC TEFC VECP83661T-4 1,628 SD 16.69 116 89.5 460 4.1 1
3600 184TC TEFC VECP83663T-4 1,871 SD 16.69 130 89.5 460 5.6 1
5
1800 184TC TEFC VECP83665T-4 1,637 SD 16.69 131 89.5 460 6.6 1
3600 213TC TEFC VECP83769T-4 2,414 SD 20.24 179 91.7 460 8.6 1
7 1/2
1800 213TC TEFC VECP83770T-4 2,062 SD 20.24 211 91.7 460 9.5 1
3600 215TC TEFC VECP83771T-4 2,563 SD 20.24 225 91 460 11.3 1
10
HVAC Motors

1800 215TC TEFC VECP83774T-4 2,499 SD 20.24 231 91.7 460 12.2 1
3600 254TC TEFC VECP82394T-4 3,403 SD 25.28 293 91.7 460 17 1
15
1800 254TC TEFC VECP82333T-4 3,318 SD 25.28 311 92.4 460 17.6 1
3600 256TC TEFC VECP84106T-4 3,879 SD 25.28 319 91.7 460 22 1
20
1800 256TC TEFC VECP82334T-4 3,517 SD 25.28 355 93 460 23.1 1
(a) See notes on inside back flap.
All ratings are 1.15 service factor at 40°C ambient.
All ratings meet the intent of IEEE-45 for weather protection, and are suitable for use in a 50°C ambient with a 1.0 service factor.
Farm Duty
Motors

■ Cast Iron Frame

Red Catalog Number indicates NEW Product.

­41
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: [email protected]
 Severe Duty Motors
Information
General

IEEE 841, 1 thru 250 Hp NEMA 143T thru 449T IP56

Three Phase,
TEFC, 575 Volts, Applications: Designed for 600V distibution systems for use in Petro-chemical,
pulp and paper, cement, aggregate mining and other process industries requiring
Foot Mounted
Single Phase

premium efficient motors designed, manufactured and tested to exceed IEEE 841-
Motors

2009 TEFC motor standards for extreme severe duty service.

Features: Meets and/or exceeds all requirements of IEEE Std. 841-2009
including: Totally enclosed cast iron construction, Lower vibration design, Inpro
Seals and Positive Lubrication System with oversize bearings on both ends,
Industrial Motors
General Purpose

Stainless Steel nameplates, Terminal lugs on motor leads, Corrosion resistant

epoxy finish, NEMA Premium efficiency, Class F insulation with a Class B
temperature Rise, 1.15 service factor and 5 year warranty. Final test and vibration
results provided with motor. Motors are marked for Div.2/Zone 2, Class I locations
and are designed to meet 200° C @ 1.0 Service Factor. Inverter Ready design with
speed range and Inverter T. Code nameplate information, see chart on page 51 for
specific motor information.
Severe Duty
Motors

NEMA Catalog List Mult. “C” Aprx. Full Load Full Load
Hp RPM Voltage Notes (a)
Frame Number Price Sym. Dim. Wt. (lb) Efficiency Amps
Foot Mounted
3600 143T ECP83580T-5 1,043 SD 12.88 53 84 575 1.1 1
1 1800 143T ECP83581T-5 1,145 SD 12.87 67 87.5 575 1.2 1
1200 145T ECP83582T-5 1,228 SD 12.88 69 82.5 575 1.4 1
Large AC
Motors

3600 143T ECP83583T-5 1,120 SD 12.88 71 85.5 575 1.6 1

1 1/2 1800 145T ECP83584T-5 1,165 SD 12.87 73 88.5 575 1.7 1
1200 182T ECP83667T-5 1,414 SD 15.93 112 87.5 575 2 1
3600 145T ECP83586T-5 1,161 SD 12.88 79 86.5 575 1.9 1
2 1800 145T ECP83587T-5 1,217 SD 12.87 77 88.5 575 2.3 1
Washdown Duty

1200 184T ECP83664T-5 1,537 SD 15.93 128 88.5 575 2.5 1

3600 182T ECP83660T-5 1,465 SD 15.93 116 88.5 575 2.7 1
Motors

3 1800 182T ECP83661T-5 1,541 SD 15.93 118 89.5 575 3.3 1

1200 213T ECP83764T-5 2,143 SD 19.50 211 89.5 575 3.6 1
3600 184T ECP83663T-5 1,805 SD 15.93 130 89.5 575 4.5 1
5 1800 184T ECP83665T-5 1,570 SD 15.93 127 89.5 575 5.3 1
1200 215T ECP83768T-5 2,215 SD 19.50 226 89.5 575 5.7 1
Explosion Proof

3600 213T ECP83769T-5 2,356 SD 19.50 179 91.7 575 6.9 1

7 1/2 1800 213T ECP83770T-5 1,978 SD 19.50 199 91.7 575 7.6 1
Motors

1200 254T ECP82276T-5 3,352 SD 24.78 348 91.7 575 8.4 1

3600 215T ECP83771T-5 2,508 SD 19.50 225 90.2 575 9 1
10 1800 215T ECP83774T-5 2,342 SD 19.50 231 91.7 575 9.8 1
1200 256T ECP82332T-5 4,079 SD 24.78 355 91.7 575 11.4 1
3600 254T ECP82394T-5 3,264 SD 24.78 305 91.7 575 13.8 1
15 1800 254T ECP82333T-5 3,015 SD 24.78 318 92.4 575 14.1 1
Pump Motors

1200 284T ECP84100T-5 4,712 SD 27.93 445 92.4 575 15.6 1

3600 256T ECP84106T-5 3,742 SD 24.78 324 91.7 575 17.8 1
20 1800 256T ECP82334T-5 3,260 SD 24.78 361 93 575 19 1
1200 286T ECP84102T-5 6,350 SD 27.93 443 92.4 575 21 1
3600 284TS ECP84107T-5 4,575 SD 26.56 429 91.7 575 22.8 1
25 1800 284T ECP84103T-5 4,228 SD 27.93 443 93.6 575 23 1
ECP84111T-5
HVAC Motors

1200 324T 6,692 SD 30.66 623 93 575 25.4 1

3600 286TS ECP84108T-5 5,480 SD 26.56 422 91.7 575 26.6 1
30 1800 286T ECP84104T-5 4,979 SD 27.93 480 93.6 575 28 1
1200 326T ECP84117T-5 8,709 SD 30.66 635 93 575 30.9 1
3600 324TS ECP84109T-5 7,498 SD 29.16 624 92.4 575 35 1
40 1800 324T ECP84110T-5 6,629 SD 30.66 635 94.5 575 37 1
1200 364T ECP84308T-5 10,662 SD 33.49 922 94.1 575 39.5 1
3600 326TS ECP84114T-5 7,821 SD 29.16 662 93 575 44 1
Farm Duty
Motors

50 1800 326T ECP84115T-5 7,783 SD 30.66 653 94.5 575 45 1

1200 365T ECP84312T-5 11,355 SD 33.49 924 94.1 575 49.3 1
(a) See notes on inside back flap.
■ Cast Iron Frame
All ratings meet the intent of IEEE-45 for weather protection, and are suitable for use in a 50°C ambient with a 1.0 service factor.
­42 Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: [email protected]
 Severe Duty Motors

Information
General
IEEE 841, Three Phase, TEFC, 575 Volts, Foot Mounted
NEMA Catalog List Mult. “C” Aprx. Full Load Full Load
Hp RPM Voltage Notes (a)
Frame Number Price Sym. Dim. Wt. (lb) Efficiency Amps
3600 364TS ECP84310T-5 11,558 SD 31.37 932 95 575 52 1

Single Phase
60 1800 364T ECP84314T-5 10,335 SD 33.49 937 95 575 54.4 1

Motors
1200 404T ECP84403T-5 14,718 SD 38.20 1275 95 575 55.2 1
3600 365TS ECP84313T-5 12,802 SD 31.37 998 95 575 64.5 1
75 1800 365T ECP84316T-5 12,019 SD 33.49 985 95.4 575 68.7 1
1200 405T ECP84404T-5 17,827 SD 38.32 1283 94.5 575 69.4 1
3600 405TS ECP84402T-5 15,341 SD 35.31 1287 95 575 88 1
100 1800 405T ECP84400T-5 16,043 SD 38.20 1304 95.4 575 89.6 1

Industrial Motors
General Purpose
1200 444T ECP84409T-5 19,609 SD 44.75 1885 95 575 92 1
444TS ECP84412T-5 17,941 SD 40.98 1799 95.4 575 109 1
3600
444TS ECP84412T-5E 17,941 SD 40.88 1740 95.4 575 109 1, 56
125 444T ECP84410T-5 18,198 SD 44.75 1915 95.8 575 111 1
1800
444T ECP84410T-5E 18,198 SD 44.62 1802 95.8 575 111 1, 56
1200 445T ECP84411T-5 22,257 SD 44.75 2000 95.4 575 114 1
3600 445TS ECP84413T-5 20,617 SD 40.98 2062 96.2 575 131 1

Severe Duty
445T ECP84406T-5 21,521 SD 44.75 1886 96.2 575 132 1

Motors
1800
150 445T ECP84406T-5E 21,521 SD 44.62 1879 96.2 575 132 1, 56
447T ECP844156TR-5 25,964 SD 48.24 2595 95.8 575 136 1, 5
1200
447T ECP849156TR-5 25,964 SD 48.24 2000 95.8 575 136 1, 5, 99
3600 447TS ECP84416T-5 27,256 SD 44.48 2182 96.2 575 177 1
447T ECP84407T-5 25,892 SD 48.24 2606 96.2 575 178 1
447T ECP84407TR-5 27,119 SD 48.24 2618 96.2 575 178 1, 5
200 1800
447T ECP84907T-5 25,892 SD 48.24 2676 96.2 575 178 1, 99

Large AC
Motors
447T ECP84907TR-5 27,119 SD 48.24 2676 96.2 575 178 1, 5, 99
1200 449T ECP844206TR-5 34,092 SD 53.24 3100 95.8 575 180 1, 5
449TS ECP844252T-5 43,915 SD 49.48 2784 96.2 575 212 1
3600
449TS ECP849252T-5 43,915 SD 49.48 2595 96.2 575 212 1, 99
449T ECP84408T-5 33,052 SD 53.24 2932 96.2 575 220 1
250

Washdown Duty
449T ECP84408TR-5 34,246 SD 53.24 2732 96.2 575 220 1, 5
1800
449T ECP84908T-5 33,052 SD 53.24 2941 96.2 575 220 1, 99

Motors
449T ECP84908TR-5 34,246 SD 53.24 2677 96.2 575 220 1, 5, 99
C-Face, Foot Mounted
1 1800 143TC CECP83581T-5 1,190 SD 13.38 71 87.5 575 1.2 1
2 1800 145TC CECP83587T-5 1,262 SD 13.38 80 88.5 575 2.3 1
3 1800 182TC CECP83661T-5 1,644 SD 16.69 111 89.5 575 3.3 1

Explosion Proof
5 1800 184TC CECP83665T-5 1,653 SD 16.69 131 89.5 575 5.3 1

Motors
7 1/2 1800 213TC CECP83770T-5 2,094 SD 20.23 211 91.7 575 7.6 1
10 1800 215TC CECP83774T-5 2,531 SD 20.23 231 91.7 575 9.8 1
15 1800 254TC CECP82333T-5 3,465 SD 25.28 309 92.4 575 14.1 1
20 1800 256TC CECP82334T-5 3,666 SD 25.28 357 93 575 19 1
25 1800 284TC CECP84103T-5 5,145 SD 27.93 444 93.6 575 23 1
30 1800 286TC CECP84104T-5 5,892 SD 27.93 487 93.6 575 28 1

Pump Motors
40 1800 324TC CECP84110T-5 7,637 SD 30.66 670 94.5 575 36.8 1
50 1800 326TC CECP84115T-5 8,790 SD 30.66 663 94.5 575 45 1
(a) See notes on inside back flap.
■ Cast Iron Frame
Red Catalog Number indicates NEW Product.
All ratings meet the intent of IEEE-45 for weather protection, and are suitable for use in a 50°C ambient with a 1.0 service factor.
HVAC Motors
Farm Duty
Motors

­43
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: [email protected]
 Severe Duty Motors
Information
General

661XL / IEEE 841, 5 thru 75 Hp NEMA 184T thru 365T IP56

Three Phase,
TEFC, 460 Volts, Applications: Petroleum, chemical and other industries with belt driven heat
exchangers requiring premium efficient motors designed to API 661 standards of
Foot Mounted
Single Phase

40,000 hours bearing life.

Motors

Features: Meets and/or exceeds all the requirements of IEEE Std. 841-2009 with
the exception of Mobilith Grease which is required for best performance of the
Roller Bearing design. Standard features include vertical lifting provisions for shaft
up and shaft down mounting, cast iron construction, Inpro Seals on both end of
Industrial Motors
General Purpose

the motor, Positive Lubrication System, NEMA Premium efficiency, Stainless Steel
nameplates, Corrosion resistant epoxy finish, Class F insulation with a Class B
temperature Rise, 1.15 service factor and 5 year warranty. Final test and vibration
results provided with motor. Motors are marked for Div.2/Zone 2, Class I locations
and are designed to meet 200° C @ 1.0 Service Factor. Inverter Ready design with
speed range and Inverter T. Code nameplate information, see chart on page 51 for
specific motor information.
Severe Duty
Motors

NEMA Catalog List Mult. “C” Aprx. Full Load Full Load
Hp RPM Voltage Notes (a)
Frame Number Price Sym. Dim. Wt. (lb) Efficiency Amps
5 1800 184T ECP63665T-4 1,570 SD 15.93 128 89.5 460 6.6 1
7 1/2 1800 213T ECP63770TR-4 2,248 SD 19.49 195 91.7 460 9.5 1, 5
10 1800 215T ECP63774TR-4 2,611 SD 19.49 231 91.7 460 12.2 1, 5
15 1800 254T ECP62333TR-4 3,372 SD 24.88 314 92.4 460 17.6 1, 5
Large AC
Motors

20 1800 256T ECP62334TR-4 3,617 SD 24.88 761 93 460 23.1 1, 5

25 1800 284T ECP64103TR-4 4,676 SD 28.01 461 93.6 460 30.5 1, 5
30 1800 286T ECP64104TR-4 5,426 SD 28.01 487 93.6 460 35 1, 5
40 1800 324T ECP64110TR-4 7,198 SD 30.76 636 94.1 460 46 1, 5
50 1800 326T ECP64115TR-4 8,354 SD 30.76 687 94.5 460 57 1, 5
Washdown Duty

60 1800 364T ECP64314TR-4 10,960 SD 33.48 936 95 460 68 1, 5

75 1800 365T ECP64316TR-4 12,644 SD 33.48 976 95.4 460 85.9 1, 5
Motors

(a) See notes on inside back.

■ Cast Iron Frame

All ratings meet the intent of IEEE-45 for weather protection, and are suitable for use in a 50°C ambient with a 1.0 service factor.
Explosion Proof
Motors
Pump Motors
HVAC Motors
Farm Duty
Motors

­44 Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: [email protected]