Communications Systems | LBB 4402/00 Audio Expander

LBB 4402/00 Audio Expander

www.boschsecurity.com

u Four audio inputs – two selectable mic/line and two

line inputs

u Four line audio outputs

u Eight supervised control inputs and five control

outputs

u Audio processing functions

u Redundant network connection

The audio expander inserts external audio into the The eight control inputs are freely programmable for
system and extracts audio from the system. This unit system actions, and priorities can be assigned to these
has control inputs and outputs for external interfacing. inputs. Each control input has the ability to monitor
It can route its audio inputs permanently or the attached line for open and short-circuits. Five
conditionally to any of the zones or to other audio control outputs are freely programmable for faults and
outputs. The routing conditions are configured using call-related actions.
the configuration software. The audio output can be The audio expander supports redundant network
programmed to get its signal from any of the audio cabling. The network can be either single branch or
inputs. The equipment can be used freestanding redundant loop. The unit is powered from the network
(tabletop) or in a 19" rack. controller via the network cable. The expander is self-
monitoring and continuously reports its status to the
Functions network controller.
The audio expander has four transformer isolated Controls and Indicators
analog audio inputs. Two of these are selectable • Two x 16-character LCD status display
between microphone and line. The other two inputs • Rotary/push control for menu control and headphone
are fixed line inputs. The expander has four volume
transformer isolated analog audio line outputs. It has Interconnections
built-in digital audio processing capable of three • Two system network connections
parametric and two shelving equalizer sections for all • Eight control inputs
audio in and outputs. They also have a selectable 20 • Two mic/line inputs
kHz monitoring signal. The 2 x 16-character display • Two line inputs
and the rotary control enable local status enquiries. • Four line outputs
The display shows the VU-meter reading when audio • Five control outputs
monitoring mode is active. Audio can also be • Headphone output
monitored by using a headphone.
2 | LBB 4402/00 Audio Expander

Certifications and approvals Technical specifications

Safety acc. to IEC 60065 / EN 60065 Electrical

Immunity acc. to EN 55103‑2 Power consumption 9 W (DC)

Emissions acc. to EN 55103-1 / FCC-47 part 15B Performance

Emergency acc. to EN 60849 / EN 54‑16 / Frequency response 20 Hz to 20 kHz (-3 dB)

ISO 7240‑16
Line inputs 2x
Maritime acc. to IEC 60945
Connectors 3-pin XLR and 2 cinch (for each line)

Region Certification S/N >87 dBA at maximum level

Europe CE CMRR >40 dB

CPD Input range +6 dBV to +18 dBV (XLR)

-6 dBV to +6 dBV (cinch)
Poland CNBOP
Mic / line inputs 2x
Installation/configuration notes
Connector 3-pin XLR and 2 cinch (for each line)

Nominal Input Level -57 dBV

S/N >62 dBA with 25 dB headroom

6
1 A/D D/A 4 CMRR >55 dB at 100 Hz

Input Impedance 1360 ohm

7 Phantom supply 12 V ±1 V at 15 mA
2 I O 5
Input range -7 dB to 8 dB ref nominal input level

Line outputs 4x

Connectors XLR and 2 cinch (for each line)

3 8
Output Impedance <100 ohm

S/N >89 dBA at maximum level

Crosstalk <-85 dB

1 Audio inputs Signal range -12 dBV to +18 dBV (XLR)

-24 dBV to +6 dBV (cinch)
2 Control inputs
Distortion at 1 kHz <0.05%
3 Plastic optical fiber network
Control inputs 8x
4 Audio outputs
Connectors Removable screw terminals
5 Control outputs
Operation Closing contact (with supervision)
6 Display and control
Control outputs 5x
7 Network processor and DSP
Connectors Removable screw terminals
8 Network redundancy switching
Mechanical
Parts included
Dimensions (H x W x D)
Quantit Component
y for tabletop, with feet 92 x 440 x 400 mm
(3.6 x 17.3 x 15.7 in)
1 LBB 4402/00 Audio Expander
for 19” rack, with brackets 88 x 483 x 400 mm
1 Set of mounting brackets for 19” rack (3.5 x 19 x 15.7 in)
1 Set of feet in front of brackets 40 mm (1.6 in)
1 Set of connectors behind brackets 360 mm (14.2 in)
 3 | LBB 4402/00 Audio Expander

Weight 7 kg (15.4 lbs)

Mounting Tabletop, 19”-rack

Color Charcoal (PH 10736) with silver

Environmental

Operating temperature -5 °C to +55 °C (23 °F to 131 °F)

Storage temperature -20 °C to +70 °C (-4 °F to 158 °F)

Humidity 15% to 90%

Air pressure 600 to 1100 hPa

Ordering information

LBB 4402/00 Audio Expander

Inserts external audio into the system and extracts
audio from the system.
Order number LBB4402/00

Represented by:

Americas: Europe, Middle East, Africa: Asia-Pacific: China: America Latina:

Bosch Security Systems, Inc. Bosch Security Systems B.V. Robert Bosch (SEA) Pte Ltd, Security Bosch (Shanghai) Security Systems Ltd. Robert Bosch Ltda Security Systems Division
12000 Portland Avenue South P.O. Box 80002 Systems 201 Building, No. 333 Fuquan Road Via Anhanguera, Km 98
Burnsville MN 55337, USA 5617 BA Eindhoven, The Netherlands 11 Bishan Street 21 North IBP CEP 13065-900
Phone: +1-800-392-3497 Phone: + 31 40 2577 284 Singapore 573943 Changning District, Shanghai Campinas, Sao Paulo, Brazil
Fax: +1-800-955-6831 Fax: +31 40 2577 330 Phone: +65 6571 2808 200335 China Phone: +55 19 2103 2860
[email protected] [email protected] Fax: +65 6571 2699 Phone +86 21 22181111 Fax: +55 19 2103 2862
www.boschsecurity.com www.boschsecurity.com [email protected] Fax: +86 21 22182398 [email protected]
www.boschsecurity.asia www.boschsecurity.com.cn www.boschsecurity.com

© Bosch Security Systems 2012 | Data subject to change without notice

1872981515 | en, V5, 24. Nov 2012