elobau GmbH & Co. KG Tel.: +49 (0) 7561 970-0 elobau.com/en/?

p=2524
Zeppelinstr. 44 Fax: +49 (0) 7561 970-100 3/23/2025
88299 Leutkirch, Germany [email protected]

Compact Joystick J2 with Standard Handle

For applications that require finesse in adverse working conditions. With up to 3 micro push
button switches and space-saving bottom mounting. The compact standard handle has proven
its suitability for demanding, dusty environments. It is straight with a symmetrical design so
that it can be operated with either the left or the right hand.

When it comes to the floating position of the hydraulics, the joystick has detent points in the
end positions both for movement forwards and to the right in order to keep the standard handle
in the respective position.

Space-saving design
High reliability and long service life thanks to contactless Hall-effect and reed technology
Different output signals are possible: analogue, redundant, CAN bus connection (CANopen / SAE J1939) or with switching output
Protection class IP67, making it ideal for adverse conditions
Deflection ±20°
Available with various actuation types such as
no detent / detent
If required, back-printed and abrasion-resistant push button switches are selectable. Backlight and function light possible

Page 1/6
 elobau GmbH & Co. KG Tel.: +49 (0) 7561 970-0 elobau.com/en/?p=2524
Zeppelinstr. 44 Fax: +49 (0) 7561 970-100 3/23/2025
88299 Leutkirch, Germany [email protected]

Technical drawing

IMAGE 1/4: NEW OPTIONAL HANDLE 321G

Page 2/6
 elobau GmbH & Co. KG Tel.: +49 (0) 7561 970-0 elobau.com/en/?p=2524
Zeppelinstr. 44 Fax: +49 (0) 7561 970-100 3/23/2025
88299 Leutkirch, Germany [email protected]

IMAGE 2/4

Page 3/6
 elobau GmbH & Co. KG Tel.: +49 (0) 7561 970-0 elobau.com/en/?p=2524
Zeppelinstr. 44 Fax: +49 (0) 7561 970-100 3/23/2025
88299 Leutkirch, Germany [email protected]

IMAGE 3/4

IMAGE 4/4

Page 4/6
 elobau GmbH & Co. KG Tel.: +49 (0) 7561 970-0 elobau.com/en/?p=2524
Zeppelinstr. 44 Fax: +49 (0) 7561 970-100 3/23/2025
88299 Leutkirch, Germany [email protected]

Article characteristics

Attribute J2A6... J2CJ J2CO...

Polarity reversal protection yes

Output signal min. 0.5 V DC –

Output signal max. 4.5 V DC –

Output signal analogue –

Output signal - centre

2.5 V DC –
position/zero position

EMC immunity (Norm) DIN EN 13309, DIN EN ISO 14982, ISO 13766, DIN EN 12895

EMC emission (Norm) DIN EN 13309, DIN EN ISO 14982, ISO 13766, DIN EN 12895

Operating voltage min. 4.5 V DC 9 V DC

Operating voltage max. 5.5 V DC 36 V DC

Current consumption max. 15 mA 120 mA

Load resistance min. 20000 Ohm –

Short-circuit resistance to
yes
GND

Short-circuit resistance to
yes
supply

Technology Hall

Protocol – J1939 CANopen

Node ID / Source Address – 0x70 0x11

Transmitting cycle – 100 ms

Baud rate – 250 kBit/s

Bus terminating resistor – no

Max. lever load with

70 mm/250 N
specified lever length

Deflection ± 20 °

Actuation type multi axis

Service life, mechanical

1000000
(Cycles)

Protection class, electronic IP67 DIN EN 60529

Operating temperature min. -25 °C

Max. operating temperature 85 °C

Min. storage temperature -40 °C

Max. storage temperature 85 °C

Installation from below

Mounting type screwed from above

Page 5/6
 elobau GmbH & Co. KG Tel.: +49 (0) 7561 970-0 elobau.com/en/?p=2524
Zeppelinstr. 44 Fax: +49 (0) 7561 970-100 3/23/2025
88299 Leutkirch, Germany [email protected]

Article characteristics

Attribute J2A6... J2CJ J2CO...

Connector type Mini-Fit Jr.

Cable length 0.3 m

Page 6/6