PC1250-8 HYDRAULIC EXCAVATOR

SPECIFICATIONS
ENGINE DRIVES AND BRAKES

Model.............................................................Komatsu SAA6D170E-5 Steering control ....................................................2 levers with pedals

Type ................................. Common rail direct injection, water-cooled, Drive method ............................................................. Fully hydrostatic
cooled EGR, turbocharged, after-cooled diesel Travel motor................................... Axial piston motor, in-shoe design
Engine power Reduction system ..................................... Planetary double reduction
at rated engine speed ...................................................... 1.800 rpm Max. drawbar pull ................................................... 686 kN/70.000 kgf
ISO 14396............................................................. 515 kW / 691 HP Gradeability .................................................................................. 70%
ISO 9249 (net engine power)................................ 502 kW / 673 HP Max. travel speeds
No. of cylinders.................................................................................. 6 Lo / Hi ........................................................................ 2,1 / 3,2 km/h
Bore × stroke ................................................................ 170 × 170 mm Service brake ................................................................Hydraulic lock
Displacement.......................................................................... 23,15 ltr
Fan drive type....................................................................... Hydraulic
UNDERCARRIAGE

Construction ..................................................................... H-leg frame

with box section track-frames
HYDRAULIC SYSTEM Track assembly
Type .............................................................................. Fully sealed
Type ............................................... Open-centre load-sensing system Shoes (each side) ........................................................................ 48
Number of selectable working modes ............................................... 2 Tension.............................................................................. Hydraulic
Main pump........................................... Variable capacity piston pump Rollers
Pumps for .....................Boom, arm, bucket, swing, and travel circuits Track rollers (each side)................................................................. 8
Maximum pump flow: Carrier rollers (each side) .............................................................. 3
Travel ........................................................................ 2 × 494 ltr/min
Swing .............................................................................. 600 ltr/min
Sub-pump for control circuit .............................................. Gear pump COOLANT AND LUBRICANT
Hydraulic motors: CAPACITY (REFILLING)
Travel ...............................2 × axial piston motor with parking brake
Fuel tank................................................................................. 1.360 ltr
Swing .....................2 × axial piston motor with swing holding brake
Radiator ..................................................................................... 142 ltr
Relief valve settings .............................................. Implement circuits
Engine oil..................................................................................... 86 ltr
Implement circuits .......................................................... 320 kg/cm²
Swing drive ......................................................................... 2 × 24,3 ltr
Travel circuit ................................................................... 350 kg/cm²
Hydraulic tank............................................................................ 670 ltr
Swing circuit................................................................... 275 kg/cm²
Final drive (each side) ................................................................. 21 ltr
Pilot circuit........................................................................ 30 kg/cm²
PTO case ................................................................................. 13,5 ltr
Hydraulic cylinders (no. of cylinders – bore × stroke):
Backhoe
Boom ........................................................ 2 – 225 mm × 2.390 mm
Arm ........................................................... 1 – 250 mm × 2.435 mm
SWING SYSTEM
Bucket PC1250-8...................................... 2 – 160 mm × 1.825 mm
Bucket PC1250SP-8 ................................. 2 – 160 mm × 1.950 mm Type ............................................................................ Hydraulic motor
Loading shovel Swing reduction ............................................................Planetary gear
Boom ........................................................ 2 – 225 mm × 1.960 mm Swing circle lubrication ................................................ Grease-bathed
Arm ........................................................... 2 – 185 mm × 1.765 mm Swing lock ..................................................................... Oil disc brake
Bucket ....................................................... 2 – 200 mm × 1.700 mm Swing speed ............................................................................ 5,5 rpm
Bottom dump ............................................... 2 – 160 mm × 435 mm

ENVIRONMENT

OPERATING WEIGHT (APPR.) Vibration levels (EN 12096:1997)*

Hand/arm ..............................≤ 2,5 m/s² (uncertainty K = 0,41 m/s²)
Operating weight, including boom, arm, bucket, operator, lubricant, Body......................................≤ 0,5 m/s² (uncertainty K = 0,20 m/s²)
coolant, full fuel tank and the standard equipment. * for the purpose of risk assessment under directive 2002/44/EC,
PC1250SP-8: + full length roller guard please refer to ISO/TR 25398:2006.

BACKHOE LOADING SHOVEL

PC1250-8 PC1250SP-8 PC1250SP-8

Work equipment 9,1 m boom / 3,4 m arm / 5,0 m³ bucket (SAE) 7,8 m boom / 3,4 m arm / 6,7 m³ bucket (SAE) 5,3 m boom / 3,8 m arm / 6,5 m³ bucket (SAE)

Double grouser shoes Operating weight Ground pressure Operating weight Ground pressure Operating weight Ground pressure
700 mm 106.500 kg 1,39 kg/cm² 110.700 kg 1,44 kg/cm² 110.900 kg 1,45 kg/cm²
12 1.000 mm 108.810 kg 0,99 kg/cm² – – – –
 HYDRAULIC EXCAVATOR
PC1250-8

TRANSPORT DIMENSIONS
Work equipment assembly weight UPPER STRUCTURE
PC1250-8 25,3 ton
6.420
PC1250SP-8 27,7 ton

BOOM

3.130
Width 3.490 mm
Weight 36,4 ton
Weight Dimension
PC1250-8 11,2 ton 9.475 × 2.894 × 1.474 mm
PC1250SP-8 11,1 ton 8.170 × 3.095 × 1.474 mm

UNDERCARRIAGE
ARM 1.222
6.425
1.585

Weight Dimension
PC1250-8 5,9 ton 4.895 × 1.626 × 890 mm Weight 30 ton
Heavy Duty version 6,2 ton 4.895 × 1.626 × 890 mm (2 × 15 ton)
PC1250SP-8 6,4 ton 4.914 × 1.683 × 890 mm Weight 30,9 ton
(with full length track roller guard) (2 × 15,45 ton)

BUCKET
OTHERS
Weight 18,4 ton

885
3.470
Weight Dimension
1.960
PC1250-8 4,3 ton 2.700 × 2.100 × 2.050 mm
Heavy Duty version 5,5 ton 2.580 × 2.276 × 2.250 mm 1.830 1.915
PC1250SP-8 6,3 ton 2.527 × 2.420 × 2.520 mm 100

ARM CYLINDER
Weight 18,0 ton

Length 3.950 mm 2.850

Weight 1,5 ton 600

400
845 620
BOOM CYLINDERS 3.155

Length 3.810 mm
Specifications including 9.100 mm boom, 3.400 mm arm, 5,0 m³
Weight 2,4 ton (2 × 1,2 ton) bucket, 700 mm double grouser shoes

13
 PC1250-8 HYDRAULIC EXCAVATOR

MACHINE DIMENSIONS
BACKHOE

B 5.355
4.810 2.240
(R=4.870) 3.470
A

5.180
4.120
4.075
3.925

990
1.790
700

50
4.995 3.900
6.425 4.600
4.965

MACHINE DIMENSIONS PC1250-8 PC1250SP-8

Boom 9,1 m 7,8 m
Arm 3,4 m 4,5 m 5,7 m 3,4 m
A Overall height 6.040 mm 6.460 mm 6.990 mm 6.265 mm
B Overall length 16.020 mm 16.050 mm 15.840 mm 14.790 mm

BUCKET AND ARM FORCE PC1250-8 PC1250SP-8

Boom 9,1 m 7,8 m
Arm 3,4 m 4,5 m 5,7 m 3,4 m
Bucket digging force (SAE) 422 kN/43.000 kgf 422 kN/43.000 kgf 343 kN/35.000 kgf 502 kN/51.200 kgf
Arm crowd force (SAE) 392 kN/40.000 kgf 327 kN/33.300 kgf 281 kN/28.700 kgf 395 kN/40.300 kgf
Bucket digging force (ISO) 479 kN/48.800 kgf 479 kN/48.800 kgf 389 kN/39.700 kgf 570 kN/58.100 kgf
Arm crowd force (ISO) 412 kN/42.000 kgf 337 kN/34.400 kgf 286 kN/29.200 kgf 412 kN/42.000 kgf

MAX. BUCKET CAPACITY AND WEIGHT

PC1250-8 / 9,1 m MONO BOOM
Arm length 3,4 m 4,5 m 5,7 m
Material weight up to 1,2 t/m³ 8,36 m³ 6.200 kg 7,03 m³ 5.550 kg 4,91 m³ 4.475 kg
Material weight up to 1,5 t/m³ 7,10 m³ 5.575 kg 5,98 m³ 5.025 kg 4,18 m³ 4.125 kg
Material weight up to 1,8 t/m³ 6,17 m³ 5.125 kg 5,20 m³ 4.625 kg 3,63 m³ 3.850 kg

PC1250SP-8 / 7,8 m MONO BOOM

Arm length 3,4 m – –
Material weight up to 1,2 t/m³ 9,93 m³ 8.075 kg
Material weight up to 1,5 t/m³ 8,43 m³ 7.350 kg
Material weight up to 1,8 t/m³ 7,32 m³ 6.800 kg

Max. capacity and weight have been calculated according to EN474-5:2006+A1:2009.

Please consult with your distributor for the correct selection of buckets and attachments to suit the application.
14
 HYDRAULIC EXCAVATOR
PC1250-8

LOADING SHOVEL

B 5.355
4.810 2.240
(R=4.870) 3.470

5.180
A

4.120
4.075
3.925

990
1.790
700
50
4.995 3.900
6.425 4.600
4.965

MACHINE DIMENSIONS WITH 6,5 m³ BOTTOM DUMP BUCKET

A Overall height 6.200 mm
B Overall length 10.940 mm

BUCKET AND ARM FORCE

Bucket digging force (ISO) 579 kN/59.000 kgf
Arm crowd force (ISO) 608 kN/62.000 kgf

BUCKET SELECTION
Bucket type Bottom dump
Bucket capacity (heaped) (ISO 7451) 6,5 m³
Bucket width (incl. side shrouds) 2.700 mm
Bucket weight 9.730 kg
No. of teeth 6
General purpose
Recommended uses
digging and loading

15
 PC1250-8 HYDRAULIC EXCAVATOR

WORKING RANGE
BACKHOE H
14
13
12
11
10
9
8
7
A
6
5
B 4
3
2
1
0
18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
-1
-2
-3
D -4
C E -5
-6
-7
-8
-9
-10
-11
-12
2,44 m
G
F

ARM LENGTH 3,4 m 4,5 m 5,7 m 3,4 m

PC1250-8 PC1250SP-8
(9,1 m boom) (7,8 m boom)
A Max. digging height 13.400 mm 13.490 mm 13.910 mm 13.000 mm
B Max. dumping height 8.680 mm 9.000 mm 9.440 mm 8.450 mm
C Max. digging depth 9.350 mm 10.440 mm 11.590 mm 7.900 mm
D Max. vertical wall digging depth 7.610 mm 8.490 mm 9.480 mm 5.025 mm
E Max. digging depth of cut for 2,44 m level 9.220 mm 10.340 mm 11.500 mm 7.745 mm
F Max. digging reach 15.350 mm 16.340 mm 17.450 mm 14.070 mm
G Max. digging reach at ground level 15.000 mm 16.000 mm 17.130 mm 13.670 mm
H Min. swing radius 7.965 mm 7.990 mm 8.150 mm 6.415 mm

16
 HYDRAULIC EXCAVATOR
PC1250-8

LOADING SHOVEL

13
12
11
10
9
8
7
A
6
5
B
4
3
2
1
0
13 12 11 10 9 8 7 6 5 4 3 2 1 0
-1
C -2
-3
-4
-5
F G
E
D

ARM LENGTH 3,8 m

PC1250SP-8
(5,3 m boom / 6,5 m³ bottom dump bucket)
A Max. cutting height 12.330 mm
B Max. dumping height 8.700 mm
C Max. digging depth 3.650 mm
D Max. digging reach 11.400 mm
E Max. digging reach at ground level 10.900 mm
F Level crowding distance 4.480 mm
G Min. crowd distance 6.130 mm

17
 PC1250-8 HYDRAULIC EXCAVATOR

LIFTING CAPACITY
A PC1250-8 A – Reach from swing centre

B – Bucket hook height

Boom: 9,1 m
Arm: 3,4 m
C – Lifting capacity
Bucket capacity: 5,0 m³
Bucket weight: 4.400 kg
– Rating over front
Track shoes: 700 mm
– Rating over side
B
C
– Rating at maximum reach

A 12,2 m 10,7 m 9,1 m 7,6 m 6,1 m 4,6 m

Arm length
B

Heavy Lift: ON 9,1 m kg *15.200 *15.200 *18.000 *18.000

6,1 m kg *15.950 13.200 *20.050 17.400 *22.950 *22.950 *27.900 *27.900
3,0 m kg 15.650 11.850 16.400 12.500 20.850 16.100 27.000 20.850 *34.950 27.650
0,0 m kg 16.250 12.300 19.950 15.200 24.200 18.200 34.400 26.100
-3,0 m kg 19.950 15.250 20.000 15.250 25.600 19.550 34.600 26.300 *43.850 38.400 *39.250 *39.250
3,4 m -6,1 m kg *23.500 *23.500 *25.400 *25.400 *32.550 *32.550

Heavy Lift: OFF 9,1 m kg *15.200 *15.200 *15.500 *15.500

6,1 m kg *15.850 13.200 *17.300 *17.300 *19.950 *19.950 *24.400 *24.400
3,0 m kg 15.650 11.850 16.400 12.500 *19.800 16.100 *23.900 20.850 *30.550 27.650
0,0 m kg 16.250 12.300 19.950 15.200 24.200 18.200 *32.650 26.100
-3,0 m kg *19.600 15.250 *19.650 15.250 *24.750 19.550 *30.750 26.300 *38.350 *38.350 *39.250 *39.250
3,4 m
-6,1 m kg *20.150 *20.150 *21.900 *21.900 *28.150 *28.150

A PC1250-8 A – Reach from swing centre

B – Bucket hook height

Boom: 9,1 m
Arm: 4,5 m
C – Lifting capacity
Bucket capacity: 4,0 m³
Bucket weight: 3.800 kg
– Rating over front
Track shoes: 700 mm
– Rating over side
B
C
– Rating at maximum reach

A 12,2 m 10,7 m 9,1 m 7,6 m 6,1 m 4,6 m

Arm length
B

Heavy Lift: ON 9,1 m kg *9.300 *9.300

6,1 m kg *9.650 *9.650 *16.650 13.700 *18.150 18.000 *20.550 *20.550
3,0 m kg *10.950 10.200 16.650 12.750 21.200 16.400 *25.600 21.300 *32.350 28.500
0,0 m kg *13.650 10.400 15.850 11.950 19.900 15.150 24.550 18.500 34.450 26.100 *29.300 *29.300
-3,0 m kg 16.400 12.400 19.550 14.800 25.100 19.050 34.000 25.700 *46.350 37.500 *31.900 *31.900
4,5 m -6,1 m kg *21.750 18.700 *23.650 20.000 *28.850 25.200 *38.200 *38.200 *48.900 *48.900

Heavy Lift: OFF 9,1 m kg *9.300 *9.300

6,1 m kg *9.650 *9.650 *14.250 13.700 *15.600 *15.600 *17.850 *17.850
3,0 m kg *10.950 10.200 *16.050 12.750 *18.500 16.400 *22.250 21.300 *28.250 *28.250
0,0 m kg *13.650 10.400 15.850 11.950 19.900 15.150 *24.200 18.500 *31.950 26.100 *29.300 *29.300
-3,0 m kg 16.400 12.400 19.550 14.800 25.100 19.050 *31.650 25.700 *40.550 37.500 *31.900 *31.900
4,5 m
-6,1 m kg *18.650 18.650 *20.300 20.000 *24.800 24.800 *33.200 *33.200 *42.600 *42.600

* Load is limited by hydraulic capacity rather than tipping.

Ratings are based on SAE Standard No. J10567.
Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.

18
 HYDRAULIC EXCAVATOR
PC1250-8

A PC1250-8 A – Reach from swing centre

B – Bucket hook height

Boom: 9,1 m
Arm: 5,7 m
C – Lifting capacity
Bucket capacity: 3,4 m³
Bucket weight: 3.600 kg
– Rating over front
Track shoes: 700 mm
– Rating over side
B
C
– Rating at maximum reach

A 13,7 m 12,2 m 10,7 m 9,1 m 7,6 m 6,1 m

Arm length
B

Heavy Lift: ON 9,1 m kg *5.900 *5.900

6,1 m kg *6.050 *6.050 *11.050 10.950 *14.950 14.350
3,0 m kg *6.800 *6.800 13.550 10.250 17.050 13.100 *19.800 16.900 *23.450 22.050 *29.300 *29.300 *39.750 *39.750
0,0 m kg *8.400 *8.400 12.850 9.600 15.950 12.050 20.100 15.300 25.900 19.800 34.800 26.450 *31.200 *31.200
-3,0 m kg *11.500 10.150 15.500 11.600 19.300 14.600 24.850 18.800 33.600 25.300 *47.600 36.800
5,7 m -6,1 m kg 18.600 14.100 19.750 15.000 25.200 19.150 *33.250 25.850 *42.350 37.850

Heavy Lift: OFF 9,1 m kg *5.900 *5.900

6,1 m kg *6.050 *6.050 *11.050 10.950 *12.700 *12.700
3,0 m kg *6.800 *6.800 *13.350 10.250 *14.850 13.100 *17.050 16.900 *20.300 *20.300 *25.550 *25.550 *34.850 *34.850
0,0 m kg *8.400 *8.400 12.850 9.600 15.950 12.050 *19.700 15.300 *24.000 19.800 *30.600 26.450 *31.200 *31.200
-3,0 m kg *11.500 10.150 15.500 11.600 19.300 14.600 24.850 18.800 *31.900 25.300 *41.650 36.600
5,7 m
-6,1 m kg *16.550 14.100 *18.050 15.000 *22.950 19.150 *28.850 25.850 *36.900 *36.900

A PC1250SP-8 A – Reach from swing centre

B – Bucket hook height

Boom: 7,8 m
Arm: 3,4 m
C – Lifting capacity
Bucket capacity: 6,7 m³
Bucket weight: 6.300 kg
– Rating over front
Track shoes: 700 mm
– Rating over side
B
C
– Rating at maximum reach

A 12,2 m 10,7 m 9,1 m 7,6 m 6,1 m 4,6 m

Arm length
B

Heavy Lift: ON 9,1 m kg *11.700 *11.700 *17.050 *17.050

6,1 m kg *12.250 *12.250 *16.300 16.100 *24.350 22.600 *28.750 *28.750 *36.350 *36.350
3,0 m kg *14.600 13.700 20.150 15.300 26.950 20.750 *33.850 27.000 *47.450 41.150
0,0 m kg 19.300 14.550 19.400 14.600 25.600 19.450 31.750 23.500 *48.750 38.650
-3,0 m kg *23.900 19.550 *23.950 19.550 *30.750 24.850 *41.450 39.250 *52.450 *52.450
3,4 m -6,1 m kg

Heavy Lift: OFF 9,1 m kg *11.700 *11.700 *17.050 *17.050

6,1 m kg *12.250 *12.250 *16.300 16.100 *21.150 *21.150 *25.150 *25.150 *32.100 *32.100
3,0 m kg *14.600 13.700 20.150 15.300 *24.450 20.750 *29.450 27.000 *41.750 41.150
0,0 m kg 19.300 14.550 19.400 14.600 25.600 19.450 *29.900 23.500 *42.750 38.650
-3,0 m kg *20.500 19.550 *20.550 19.550 *26.450 24.850 *36.100 *36.100 *45.800 *45.800
3,4 m
-6,1 m kg

* Load is limited by hydraulic capacity rather than tipping.

Ratings are based on SAE Standard No. J10567.
Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.

19