1314 Quick Start Guide
1314 Quick Start Guide
Hardware
This diagram shows the necessary physical connections to be established before
operating the Model 1314 PC Programming Station.
Serial cable
or USB cable
CAN Gateway
or
1309 Interface Box
Curtis device
CavortaOrder 4/13/04 10:21 AM Page 4
Interface cables
A CAN Gateway communication interface is required to communicate with MC-2
devices. All other Curtis controllers require the 1309 communication interface. You
must also attach the appropriate cable from the interface box to the Curtis device
(Molex, RJ11 or Conxall).
Getting Updates over the Internet
The "Check for Updates" command on the Help menu provides an easy way
to get the latest version of 1314 PC Programming Station using your active
Internet connection.
To check for updates:
1. Connect to the Internet
2. In Model 1314 PC PS, select "Check for Updates" from the Help menu.
3. The update is downloaded and installed automatically.
Troubleshooting
If you have problems while running the PC Programming Station,
please try the following:
• Verify proper connection of the PC, the interface cable and controller.
• Make sure the controller has power.
• Do not switch to another windows program while data is sent/received
• Close other windows programs before operating the Model 1314 PC
Programming Station.
If the problem persists, refer to the Model 1314 help or contact your Curtis representative.