Scribd
Upload
3 views

CALIBRATION CERTIFICATE

This document is a calibration certificate for a dial type weighing scale belonging to KOM Medical Supply, detailing its calibration process and results. The scale was calibrated on March 31, 2025, with a resolution of 0.02 kg and a capacity of 100 kg, using standard test weights traceable to the National Metrology Laboratory. The preliminary evaluation indicates satisfactory condition, and the calibration results include repeatability and error of indication data.

Uploaded by

Morse Code
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
3 views

CALIBRATION CERTIFICATE

This document is a calibration certificate for a dial type weighing scale belonging to KOM Medical Supply, detailing its calibration process and results. The scale was calibrated on March 31, 2025, with a resolution of 0.02 kg and a capacity of 100 kg, using standard test weights traceable to the National Metrology Laboratory. The preliminary evaluation indicates satisfactory condition, and the calibration results include repeatability and error of indication data.

Uploaded by

Morse Code
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Republic of the Philippines

DEPARTMENT OF SCIENCE AND TECHNOLOGY


REGIONAL OFFICE NO. III
REGIONAL STANDARDS AND TESTING LABORATORY

CALIBRATION CERTIFICATE

Company Name : KOM Medical supply


Address : Binondo, Manila

Attention :Carmel Ann I. Nucum

Type of Job : Calibration Scale


Instrument Description : Dial Type Weighing Medical Depot
Manufacturer’s Name : MD/MEDX Date Received : 08 March 2025
Serial No. : 202404032118 Date Calibrated : 31 March 2025
Resolution : 0.02 kg Ambient Temperature : 21 °C
Range/Capacity : 100 kg Relative Humidity : 52%

CALIBRATION METHOD:

The calibration method is based on CM-613 "Calibration of Weighing Scales and Balances". The Standard Test
Weights SN MTR-CH-003 are traceable to the International System of Units (SI) as maintained by the following:
Name of Standard Traceability
Test Weights SNMTR-CH-003 National Metrology Laboratory (NML-ITDI), Phils.
Certificate No: R03-MET-2309-0819-007
PRELIMINARY EVALUATION:
Preliminary evaluation shows that the general condition and workmanship of the instrument are satisfactory.
CALIBRATION RESULTS:
I. Repeatability Test:
Load (kg) Standard Deviation(kg)
100.00 0.082

II. Error of Indication


Normal Value (kg) Error (kg) Uncertainly (kg)
0.00 0.00 0.000
20.00 -0.02 0.017
40.00 -0.04 0.020
60.00 -0.06 0.024
80.00 -0.08 0.28
100.00 -0.10 0.033

Calibrated by:

You might also like