Scribd
Upload
1 views

Slides Set 7

The document outlines various configurations for setting up a DHCP server on routers, including single and multiple network configurations. It provides step-by-step commands for configuring IP addresses, DHCP pools, excluded addresses, and IP helper addresses. Additionally, it includes examples of routers acting as DHCP servers in different network scenarios, including remote sites.

Uploaded by

Shamim Ahmad
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
1 views

Slides Set 7

The document outlines various configurations for setting up a DHCP server on routers, including single and multiple network configurations. It provides step-by-step commands for configuring IP addresses, DHCP pools, excluded addresses, and IP helper addresses. Additionally, it includes examples of routers acting as DHCP servers in different network scenarios, including remote sites.

Uploaded by

Shamim Ahmad
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 20

DHCP

ALL POSSIBLE METHODS


# 1 Router act as DHCP Server

fa0/0 10.0.0.1
Configuration
 Router(config)#int fa 0/0

 Router(config-if)#ip add 10.0.0.1 255.0.0.0

 Router(config-if)#no sh

 Router(config-if)#exit

 Router(config)#ip dhcp pool arsalan

 Router(dhcp-config)#network 10.0.0.0 255.0.0.0

 Router(dhcp-config)#default-router 10.0.0.1

 Router(dhcp-config)#dns-server 8.8.8.8

 Router(dhcp-config)#exit

 Router(config)#ip dhcp excluded-address 10.0.0.1 10.0.0.9


Output
# 2 Router act as DHCP Server for both Networks

fa0/0 10.0.0.1 fa1/0 20.0.0.1


Configuration

 Router(config)#ip dhcp pool pool1


 Router(config)#int fa 0/0  Router(dhcp-config)#network 10.0.0.0 255.0.0.0
 Router(config-if)#ip add 10.0.0.1 255.0.0.0  Router(dhcp-config)#default-router 10.0.0.1
 Router(config-if)#no sh  Router(dhcp-config)#dns-server 8.8.8.8
 Router(config-if)#exit  Router(dhcp-config)#exit
 Router(config)#ip dhcp excluded-address 10.0.0.1 10.0.0.10

 Router(config)#int fa 1/0  Router(config)#ip dhcp pool pool2


 Router(config-if)#ip add 20.0.0.1 255.0.0.0  Router(dhcp-config)#network 20.0.0.0 255.0.0.0
 Router(config-if)#no sh  Router(dhcp-config)#default-router 20.0.0.1
 Router(config-if)#exit  Router(dhcp-config)#dns-server 8.8.8.8
 Router(dhcp-config)#exit
 Router(config)#ip dhcp excluded-address 20.0.0.1 20.0.0.10
Output
# 3 DHCP Server

fa0/0 10.0.0.1

10.0.0.2
Configuration
Router(config)#int fa 0/0
Router(config-if)#ip add 10.0.0.1 255.0.0.0
Router(config-if)#no sh
Router(config-if)#exit
Output
# 4 DHCP Server in Network 1
fa1/0 20.0.0.1
fa0/0 10.0.0.1 Ip helper-address 10.0.0.2

10.0.0.2
Configuration

 Router(config)#int fa 0/0

 Router(config-if)#ip add 10.0.0.1 255.0.0.0

 Router(config-if)#no sh

 Router(config-if)#exit

 Router(config)#int fa 1/0

 Router(config-if)#ip add 20.0.0.1 255.0.0.0

 Router(config-if)#ip helper-address 10.0.0.2

 Router(config-if)#no sh

 Router(config-if)#exit
C
O
N
F
I
G
U
R
A
T
I
O
N
#5 DHCP Server in Remote Site

fa1/0 30.0.0.1 fa1/0 30.0.0.2

fa0/0 10.0.0.1 fa0/0 20.0.0.1

Ip helper-address 30.0.0.10 Ip helper-address 30.0.0.10

IP 30.0.0.10
DG Any Router
 Router2(config)#int fa 0/0

Configuration  Router2(config-if)#ip add 20.0.0.1 255.0.0.0

 Router2(config-if)#no sh
 Router(config)#int fa 0/0
 Router2(config)#int fa 1/0
 Router(config-if)#ip add 10.0.0.1 255.0.0.0
 Router2(config-if)#ip add 30.0.0.2 255.0.0.0
 Router(config-if)#no sh
 Router2(config-if)#ip helper-address 30.0.0.10
 Router(config)#int fa 1/0
 Router2(config-if)#no sh
 Router(config-if)#ip add 30.0.0.1 255.0.0.0
 Router2(config)#router ospf 1
 Router(config-if)#ip helper-address 30.0.0.10
 Router2(config-router)#network 30.0.0.0 0.255.255.255 area 0
 Router(config-if)#no sh
 Router2(config-router)#network 20.0.0.0 0.255.255.255 area 0
 Router(config)#router ospf 1
 Router2(config-router)#exit
 Router(config-router)#network 10.0.0.0 0.255.255.255 area 0

 Router(config-router)#network 30.0.0.0 0.255.255.255 area 0

 Router(config-router)#exit
DHCP
Configuration
Router3 as Remote DHCP

fa1/0 30.0.0.1 fa1/0 30.0.0.2

fa0/0 20.0.0.1
fa0/0 10.0.0.1
Ip helper-address 30.0.0.10 Ip helper-address 30.0.0.10

IP 30.0.0.10
 Router2(config)#int fa 0/0

Configuration  Router2(config-if)#ip add 20.0.0.1 255.0.0.0

 Router2(config-if)#no sh
 Router(config)#int fa 0/0
 Router2(config)#int fa 1/0
 Router(config-if)#ip add 10.0.0.1 255.0.0.0
 Router2(config-if)#ip add 30.0.0.2 255.0.0.0
 Router(config-if)#no sh
 Router2(config-if)#ip helper-address 30.0.0.10
 Router(config)#int fa 1/0
 Router2(config-if)#no sh
 Router(config-if)#ip add 30.0.0.1 255.0.0.0
 Router2(config)#router ospf 1
 Router(config-if)#ip helper-address 30.0.0.10
 Router2(config-router)#network 30.0.0.0 0.255.255.255 area 0
 Router(config-if)#no sh
 Router2(config-router)#network 20.0.0.0 0.255.255.255 area 0
 Router(config)#router ospf 1
 Router2(config-router)#exit
 Router(config-router)#network 10.0.0.0 0.255.255.255 area 0

 Router(config-router)#network 30.0.0.0 0.255.255.255 area 0

 Router(config-router)#exit
Configuration Router3(config)#router ospf 1
Router3(config-router)#network 30.0.0.0 0.255.255.255 area 0
Router3(config-router)#exit
Router(config)#ip dhcp pool pool1
Router(dhcp-config)#network 10.0.0.0 255.0.0.0
Router(dhcp-config)#default-router 10.0.0.1
Router(dhcp-config)#dns-server 8.8.8.8
Router(dhcp-config)#exit
Router(config)#ip dhcp excluded-address 10.0.0.1 10.0.0.10

Router(config)#ip dhcp pool pool2


Router(dhcp-config)#network 20.0.0.0 255.0.0.0
Router(dhcp-config)#default-router 20.0.0.1
Router(dhcp-config)#dns-server 8.8.8.8
Router(dhcp-config)#exit
Router(config)#ip dhcp excluded-address 20.0.0.1 20.0.0.10
Output

You might also like