Transformer Valves Product Summary

2025 Edition
 Company Introduction

Hengyang Perma Valves Co.,ltd is a professional transformer valves supplier in China. our
products including radiator butterfly valves, drain valves with sampler, sampling device,
transformer globe valves, transformer ball valves, transformer gate valves etc. We not only
supply our standard valves, but also we can provide customized service for various of our
valves .

PERMA VALVES considers product quality and customers' requirements as our highest
priority. We always strive to better serve our valued customers. We work hard in combining our
customer’s interests with our own. We respect and treasure employees' hard work and share
with them the value created by the whole team. We conform to the latest industry standards
and place emphasis on managerial, technical and technological innovation. We are looking
forward to working with more customers worldwide, creating value together.

PERMA VALVES mainly export valves to the countries in North America, South America,
Middle East, South East Asia, East Asia, mainly serve for transformer making industry,
transformer repair and maintenance projects, transformer refurbishment projects . we can
offer in time delivery for the various needs of our customers.the company name as well as the
brand name "Perma" was derived from our business aspiration that keep the satisfaction of
our users permanently, and rely on quality first mindset the valves we supply are permanent
reliable.

Our company not only make our own brand valves, we also make valves with clients' own
brands. We looking for cooperating with agents or distributors from all over the world for
marketing of our own brand.
 Content

1. Radiator Butterfly Valve Series

a. General introduction of 2 types of radiator butterfly valves (Page 1)
b. Different bolting assembly of radiator butterfly valves (Page 2)
c. Metal to metal seated radiator butterfly valves (Page 3~4)
d. Vacuum tight radiator butterfly valves (Page 5~6)
e. Welding type radiator butterfly valves (Page 7)
f. Die cast Aluminum radiator butterfly valves / Stainless Steel Die casting radiator butterfly valve (Page 8)
g. Customized butterfly valves and Radiator Butterfly Valves for High Corrosive Application (Page 9)

2. Ball Valves
a. Flange type ball valves (Page 10)
b. Thread type ball valves (Page 10)
c. welding type ball valves (Page 11)
d. 3 way ball valves (Page 11)

3. Gate Valves
a. Stainless steel gate valves (Flanged and thread type) (Page 12)
b. Copper alloy gate valves (Flanged and thread type) (Page 12)

4. Globe Valves
a. Stainless steel gate valves (Flanged and thread type) (Page 13)
b. Copper alloy gate valves (Flanged and thread type) (Page 13)

5. Drain Valves
a. DIN standard drain valves (Page 14)
b. Gate valve type (single flange with oil sampler) (Page 14)
c. Ball Valve type (Single flange) (Page 14)
d. ANSI standard drain valves (NPT thread ends, Single flange ends) (Page 15~17)
e. ANSI standard stainless steel drain valves (Single flange ends) (Page 17)

6. Oil sampling Device

a. NPT thread ends (Page 18)
b. With welding tube (Page 18)
c. with flange (Page 18)

7. Check Valves
a. Dual plate check valve (Page 19)
b. Single disc swing check valve (Page 19)

8. Rubber Seals (Page 20)

9. Order instruction

Catalogue Edition introduction

2017 Edition 2022 Edition 2025 Edition (Current Edition)

Radiator Butterfly Valve Series

General Introduction

Butterfly valves are widly used valves in oil immersed transformers and gas insulated transformers.
Due to their simple structure, easy installation, easy operation, small space occupation, and great cost
advantages, they are usually the first - choice valves for the radiator pipes of oil immersed transformers.
Common butterfly valves for transformer radiator pipes are divided into two types. One is a metal to metal
seated butterfly valve with a symmetrical mid- line structure and all-metal sealing. The other is a single-
eccentric structure butterfly valve with a rubber sealing ring installed on the butterfly plate. The two types of
butterfly valves have their own characteristics.

For the metal to metal seated butterfly valve, due to its symmetrical mid - line structure and the metal disc
of the butterfly plate, the resistance coefficient is small, and the transformer oil can pass through smoothly.
Since its passage is all - metal sealed, there is no need to worry about the aging problem of the rubber
sealing ring, and its service life can be as long as several decades. However, because its sealing method
is metal - to - metal sealing and it adopts a mid - line structure, it is difficult for this butterfly valve to achieve
zero leakage. There are relatively lenient maximum allowable leakage standards in the BS/EN50216 - 8
standard for reference.

The single - eccentric soft - seal butterfly valve, also known as the vacuum butterfly valve, can achieve
complete zero leakage and even vacuum sealing because there is an oil - resistant rubber sealing ring on
the butterfly plate. Its weakness is the problem of sealing failure caused by the aging of the rubber sealing
ring on the butterfly plate after many years. Our company has been continuously conducting research and
development and experiments, optimizing the structure and screening out high - performance seals through
strict tests such as hot transformer oil tests and UV aging tests on materials.

1
 Radiator Butterfly Valve Series

Different Bolting Assembly Method

Type: BA1. Hex. headed Screw install from both sides this type of
installation suitable for our full thread type bolting holes. When install
ation or disassembly the radiators,there will be no influnce on another
side of screw. it will be easy for both installation and disassembly. our
valve body thickness is about 35 ~ 40mm for 3"(80), it is a installation
method by Perma Valves.

Type:BA2. Full threaded bolts vs full thread bolting holes,when fast

-en the nut from one side another side nut shall be fixed to avoid rotat
ion of bolt. This type of installation suitable for thin valve body.

Type:BA3.Full threaded bolts vs through bolting hole,Same as BA2,

when fasten the nut from one side , another side nut shall be fixed to
he aviod rotation of bolts.

Type:BA4. This bolting hole is though type bolting hole with oval
counter sunk hole. the bolt is special made,with oval shaped bulge in
middle of the bolt. the advantage of this bolt is, when fasten the nut
from one side, the bolt will not rotate, and the nut on another side will
not losen.

Type:BA5. This bolting hole is though type bolting hole with round
concentric sunk hole, the sunk hole is biger than though bolting hole.
the bolt with round shaped bulge in middle, and with a tail on the end
of bolt.the tail with flat face on both side for wrench.This type of bolts
and bolting hole mainly install on the type of flange with threaded bolt
ing holes, and directly weld on transformer tank wall.

Type:BA6. This installation only available for ourdie casting version

radiator butterfly valve. Bolting hole is through type, the bolting area
valve body is thin,so there are romms for the nuts.this type of install-
-ation mainly suitable for the tank flange direct weld on transformer
tankwall, rather than through a tube.

Type: BA7. Hex. headed Screw install from tank side flange, this
type of installation suitable for our full thread type bolting holes.When
installation or disassembly the radiators,it is very convienent.However
when the radiators been installed, and fasten the nuts, the bolts may
rotate, in this case, a wrench to fix the hex head of bolt is necessary,
This type is easier for radiator installation when compare with BA-1.

2
Radiator Butterfly Valve Series

Metal Seated Butterfly Valve

Shapes of butterfly valves(Square, Round, X shape, Retangle)

Body Material: Carbon steel, Stainless Steel, Ductile Iron

Design and testing standard: BS/EN50216-8
Suitable temperature: -30~80℃ /120℃，-46~80℃ /120℃，-60~ 120℃
Locking: Option
Standard coating grade:C4, (C5,C5M, CX available on our Marine enviroment series )
Customize :Available

Options of shaft sealing (assembly inside of the valve, resistant to transformer hot oil shall be take into consideration)
NBR HNBR Suitable temperature -30/-45-~105℃ economical
Braided PTFE Packing -50~160℃ Good sealing property, be resistant to aging, economical
Viton -20~180℃
Fluorosilicon Rubber -60~250℃

Options of Flange gaskets (assembly between transformer tank flange and radiator flange, resistant to transformer hot
oil , and UV light resistance shall be take into consideration)

NBR/HNBRSuitable temperature -30/-45-~105℃ economical, disadvantage: Poor resistance to UV aging. Not

recomand to be Flange gaskets, except indoor installation where sunshine can not reach.
ACM Rubber: -30~105℃ resistant to UV aging, recomand
Viton -20~180℃
Fluorosilicon Rubber -60~250℃

Dimensions Table. for dimensions out of this table please contact Perma sales

Bolting Hole
Bolting
Dimensions OD PCD Thickness Gasket groove Bolting type None-tapped
Quantity Metric UNC
hole
DN25 1" Round Φ115 85 35 with/without TH/FT 4 M12 Φ14 1/2"UNC
DN40 1.5" Square 90*90 85 35 with/without TH/FT 4 M12 Φ14 1/2"UNC
DN50 2" Square 125*125 125 35 with/without TH/FT 4 M12 Φ14 1/2"UNC
DN50 2" Round Φ165 125 35 with/without TH/FT 4 M16 Φ18 5/8"-11UNC
DN80 3" Square 150*150 160 40/35 with/without TH/FT/AR/XP 4 M16 Φ18 5/8"-11UNC
DN80 3" Square 160*160 160 40/35 with/without TH/FT/AR/XP 4 M16 Φ18 5/8"-11UNC
DN80 3" Square 150*150 150 40/35 with/without TH/FT/AR/XP 4 M16 Φ18 5/8"-11UNC
DN80 3" Round Φ200 160 40/35 with/without TH/FT/AR/XP 4 or 8 M16 Φ18 5/8"-11UNC
DN80 3" X shape - 160 40/35 with/without FT 4 M16 Φ18 5/8"-11UNC
DN100 4" Square 170*170 180 40 with/without FT/AR/XP 4 M16 Φ18 5/8"-11UNC
DN100 4" Round Φ220 180 40 with/without FT/AR 8 M16 Φ18 5/8"-11UNC
DN125 5" Round Φ250 210 45 with/without FT/AR 8 M16 Φ18 5/8"-11UNC
DN125 5" Round Φ235 200 45 with/without FT/AR 8 M20 Φ23 3/4"-10UNC
DN150 6" Round Φ285 240 45 with/without FT/AR 8 M20 Φ23 3/4"-10UNC
DN175 7" Round Φ315 270 45 with/without FT/AR 8 M20 Φ23 3/4"-10UNC
DN200 8" Round Φ340 295 45 with/without FT/AR 8 M20 Φ23 3/4"-10UNC
DN250 10" Round Φ395 350 50 with/without FT/AR 12 M20 Φ23 3/4"-10UNC
DN300 12" Round Φ445 400 60 with/without FT/AR 12/16 M20 Φ23 3/4"-10UNC
DN350 14" Round Φ500 460 70 with/without FT 16 M20 Φ23 3/4"-10UNC

3
 Radiator Butterfly Valve Series

Metal to Metal Seated Radiator Butterfly Valve

Design Feature and advantages

Perma valves staff pay highly attention on the aging and anti-corrosive issues of transformer valves, when design the
radiator butterfly valves, we had done a lot of tests on different sealing materials, such as UV aging tests, Ozone aging
tests, most important hot transformer oil tests. when we design the metal to metal seated radiator butterfly valves, we
had take long service life as the most important target. Following are our basic design features which make sure long
term reliable service.

1. Shaft & disc Sealing

Shaft & disc sealing area is the joint of disc and forked shaft, it is a place where leakage easy happend. most of radiator
butterfly valve manufacturers use rubber as sealing material here. Our sealing material here is soft metal extrusion seal,
which aging problem will never happen here. Our disc material is chilled spring steel.

2. Stem Packing Design

Our Stem sealing design is rely on valve stuffing box, this sealing design is popular in high pressure general industrial
valves, it turn out to be a very reliable design. On one hand, by fastner the screwed gland ring, the sealing materials
been compressed tightly and form as vacuum tight sealing. on the other hand, the sealing materials can be replace in
case of aging, after many years of using. and besides, the sealing material can be braided PTFE packing, which is a
durable material with good sealing property. compare with the design shaft with O-ring grooves, our shaft seals can be
with higher compress rate and adjustable, replaceable features.

Thread Gland Ring

3. Multiple bolting hole design of choose
In order to suit different design of transformer tank and radiator flanges, we can supply butterfly valves with different
type of bolting holes.

A. Full threaded Bolting hole. (FT type) B. Through type Bolting hole (TH type)

C. Elliptical sunken anti-rotation bolting hole (AR type) D. Round sunken concentric bolting hole (XP type)

4
Radiator Butterfly Valve Series

Vacuum Tight Butterfly Valve

Shapes of butterfly valves(Square, Round, X shape, Retangle)

Body Material: Carbon steel, Stainless Steel, Aluminum, Brass, etc.

Testing : Vacuum test - 0.1Mpa, Air test 0.6Mpa
Suitable temperature: -30~80℃ /120℃，-46~80℃ /120℃，-60~ 120℃
Locking: Option
Standard coating grade:C4, (C5,C5M, CX available on our Marine enviroment series )
Customize :Available

Options of shaft sealing (assembly inside of the valve, resistant to transformer hot oil shall be take into consideration)
NBR HNBR Suitable temperature -30/-45-~105℃ economical
Braided PTFE Packing -50~160℃ Good sealing property, be resistant to aging, economical
Viton -20~180℃
Fluorosilicon Rubber -60~250℃

Options of Flange gaskets (assembly between transformer tank flange and radiator flange, resistant to transformer hot
oil , and UV light resistance shall be take into consideration)

NBR/HNBRSuitable temperature -30/-45-~105℃ economical, disadvantage: Poor resistance to UV aging. Not

recomand to be Flange gaskets, except indoor installation where sunshine can not reach.
ACM Rubber: -30~105℃ resistant to UV aging, recomand
Viton -20~180℃
Fluorosilicon Rubber -60~250℃

Options of disc sealing ring

NBR HNBR Suitable temperature -30/-45-~105℃
Viton -20~180℃,Fluorosilicon Rubber -60~250℃
Dimensions Table. for dimensions out of this table please contact Perma sales
Bolting Hole
Bolting
Dimensions OD PCD Thickness Gasket groove Bolting type None-tapped
Quantity Metric UNC
hole
DN25 1" Round Φ115 85 35 with/without TH/FT 4 M12 Φ14 1/2"UNC
DN40 1.5" Square 90*90 85 35 with/without TH/FT 4 M12 Φ14 1/2"UNC
DN50 2" Square 125*125 125 35 with/without TH/FT 4 M12 Φ14 1/2"UNC
DN50 2" Round Φ165 125 35 with/without TH/FT 4 M16 Φ18 5/8"-11UNC
DN80 3" Square 150*150 160 40/35 with/without TH/FT/AR/XP 4 M16 Φ18 5/8"-11UNC
DN80 3" Square 160*160 160 40/35 with/without TH/FT/AR/XP 4 M16 Φ18 5/8"-11UNC
DN80 3" Square 150*150 150 40/35 with/without TH/FT/AR/XP 4 M16 Φ18 5/8"-11UNC
DN80 3" Round Φ200 160 40/35 with/without TH/FT/AR/XP 4 or 8 M16 Φ18 5/8"-11UNC
DN80 3" X shape - 160 40/35 with/without FT 4 M16 Φ18 5/8"-11UNC
DN100 4" Square 170*170 180 40 with/without FT/AR/XP 4 M16 Φ18 5/8"-11UNC
DN100 4" Round Φ220 180 40 with/without FT/AR 8 M16 Φ18 5/8"-11UNC
DN125 5" Round Φ250 210 45 with/without FT/AR 8 M16 Φ18 5/8"-11UNC
DN125 5" Round Φ235 200 45 with/without FT/AR 8 M20 Φ23 3/4"-10UNC
DN150 6" Round Φ285 240 45 with/without FT/AR 8 M20 Φ23 3/4"-10UNC
DN175 7" Round Φ315 270 45 with/without FT/AR 8 M20 Φ23 3/4"-10UNC
DN200 8" Round Φ340 295 45 with/without FT/AR 8 M20 Φ23 3/4"-10UNC
DN250 10" Round Φ395 350 50 with/without FT/AR 12 M20 Φ23 3/4"-10UNC
DN300 12" Round Φ445 400 60 with/without FT/AR 12/16 M20 Φ23 3/4"-10UNC
DN350 14" Round Φ500 460 70 with/without FT 16 M20 Φ23 3/4"-10UNC

5
 Radiator Butterfly Valve Series

Vacuum tight Radiator Butterfly Valve

Design Feature and advantages

Vacuum tight radiator butterfly valve is very different from metal to metal seated radiator butterfly valves. the structure is
valve shaft and disc offset,that means the disc is located on onside of the shaft.and there is a rubber sealing ring on the
disc. this disc rubber sealing ring makes the valve disc sealing can be vacuum tight. due to rubber seals always have to
take aging issue into consideration, our design have take replaceable rubber sealing parts into consideration, so when
the rubber seals have aging problem after many years of using, users can replace the rubber seals on site. on one hand
it can be save cost for the user, on the other hand, replace the sealing parts is easier and time saving when compare
with replace new valves.

1. Replaceable Disc and disc sealing Ring

The disc is fixed with the shaft by allen screws
when the disc in full open position, the disc can
be dis-assembly by unfasten the allen screws.
then the disc can be pull out. the old disc seal
ring can be pick out by tools, then replace the
new sealing ring on the disc.

2. Stem Packing Design

Our Stem sealing design is rely on valve stuffing box, this sealing design is popular in high pressure general industrial
valves, it turn out to be a very reliable design. On one hand, by fastner the screwed gland ring, the sealing materials
been compressed tightly and form as vacuum tight sealing. on the other hand, the sealing materials can be replace in
case of aging, after many years of using. and besides, the sealing material can be braided PTFE packing, which is a
durable material with good sealing property. compare with the design shaft with O-ring grooves, our shaft seals can be
with higher compress rate and adjustable, replaceable features.

Thread Gland Ring

3. Multiple bolting hole design of choose
In order to suit different design of transformer tank and radiator flanges, we can supply butterfly valves with different
type of bolting holes.

A. Full threaded Bolting hole. (FT type) B. Through type Bolting hole (TH type)

C. Elliptical sunken anti-rotation bolting hole (AR type) D. Round sunken concentric bolting hole (XP type)

FT TH AR XP

6
 Radiator Butterfly Valve Series

Welding Type Radiator Butterfly Valve

Most of the time the radiator Butterfly Valve been installed between transformer tank flange and radiator flange,
and there are 2 rubber gaskets on both side of the radiator butterfly valve. Rubber gaskets have good sealing
property, but aging issue always a problem for transformer industry. the hot transformer oil, UV light (sunshine),
Ozone(trioxygen),rubber compress or other enviroment issues always cause aging of the rubber seals. Every time
when transformer need repare or need replace radiators, the valve shall be shut off. but if the rubber gasket between
transformer tank flange and the radiator butterfly valve have problem of leakage, it will be very difficult to replace due to
the transformer tank is full of transformer oil. Welding type radiator butterfly valve will avoid this problem. welding type
radiator butterfly valve is connected to transformer tank by a tube and sealed by welding. Perma valves supply welding
type radiator butterfly valves for both metal to metal seated and vacuum tight.

Metal to metal seated / Vacuum tight

Welding tube without supports Welding tube with supports

Body Material: Carbon steel, Stainless Steel,

Testing : Vacuum test - 0.1Mpa, Air test 0.6Mpa
Suitable temperature: -30~80℃ /120℃，-46~80℃ /120℃，-60~ 120℃
Locking: Option
Standard coating grade:C4, (C5,C5M, CX available on our Marine enviroment series )
Customize :Available， tube with supports or without.

Options of shaft sealing (assembly inside of the valve, resistant to transformer hot oil shall be take into consideration)
Braided PTFE Packing -50~160℃ Good sealing property, be resistant to aging, economical
Viton -20~180℃
Fluorosilicon Rubber -60~250℃
Welding type radiator butterfly valve required long service life,and maintanance free.when select stem packing material,
on one hand we should select the material with long service life, on the other hand the material have to be replaceable
and easy to replace.

Options of Flange gaskets ( for welding type radiator butterfly valve, the valve body is welding with transformer tank
with a tube, there is no flange gasket on inlet of radiator butterfly valve. there is only one gasket on butterfly valve
outlet which contact with radiator flange. the gasket have to be resistant to transformer hot oil , and UV light resistance
shall be take into consideration)

NBR/HNBR Suitable temperature -30/-45-~105℃ economical, disadvantage: Poor resistance to UV aging. Not
recomand to be Flange gaskets, except indoor installation where sunshine can not reach.
ACM Rubber: -30~105℃ resistant to UV aging, recomand
Viton -20~180℃
Fluorosilicon Rubber -60~250℃

Disc sealing Ring: For welding type radiator butterfly valve, the sealing ring shall be durable and replaceable, due to
the valve body weld together with transformer tank, the valve service life shall be equal to the transformer life circle.
when if the disc sealing ring aged after many years of using, the disc sealing ring shall be replace to gain new service
life.

Welding tube dimensions: 2", 3", 4", or other customized dimensions.

7
 Radiator Butterfly Valve Series

Die Casting Aluminum Radiator Butterfly Valve

the major parts of Aluminum radiator butterfly valves are die cast aluminum parts. which is very light, easy installation
and cost saving. Alumimum radiator butterfly valves belongs to vucuum tight.

1. Stem Packing Design

Perma Aluminum radiator butterfly valve stem sealing design with double seals, on the top there is a stuffing box, by
fastner the screwed gland ring, the sealing materials been compressed tightly and form as vacuum tight sealing. the
sealing materials can be replace in case of aging, after many years of using. on lower position, there are 2 O-rings on
shaft, which makes the shaft sealing more reliable.

Thread Gland Ring

Stainless Steel Casting form Radiator Butterfly Valve WN80, Vacuum tight

Material: Cast Stainless Steel Grade 304/316

DN80/3" PCD160
Thickness: 40mm
Bolting Hole diameter: 18mm
Installation type. BA6
Rubber seals: NBE/ ACM/VITON etc.

8
Radiator Butterfly Valve Series

Customzied Butterfly Valves

Perma Valves provide customized services for some of our products, in many transformer repair or refurbishment
projects, the valves need to replace. while the origina! manufacturer of the valve is no longger able to provide
thesame products, especially some transformers have already run for several decades, in this case, you can send
theinformation of the old valve to us, with the information like valve material, dimensions of flange, working temperat.
ure and enviroments. Our engineers will workout a solution and provide a drawing of new valve which can be repl.
ce the old valve, and our sales person will make quotation for the customized valve.Following photos are some ofthe
cases and examples.

Radiator Butterfly Valves for High Corrosive Application (C5, C5M)

Corrosive and aging issues are the most common problems for radiator butterfly valves. Perma pay great attention
to solve these problems, and most important is, we always seeking economic solutions. we provide the products with
reliable quality as well as competitive costs.
Whether in coastal areas or offshore regions, the corrosion of metal equipment by salt spray is inevitable. Therefore,
we have developed corrosion resistant butterfly valve products for the marine salt corrosion environment.We subject
the products to special treatments to enable them to remain stable in a salt spray environment for a long time. For the
treated products, different treatment methods can respectively pass the neutral salt spray test for 1000 to 1500 hours.
Normally when the products for marine enviroment, the first choice will be stainless steel and bronze. these materials
have good corrosion resistant property , but these materials also means higher costs . Perma developed corrosion
resistant radiator butterfly valves with steel valve body, and the valve body with Hot dip galvanized treatment or with
Dacromet treated, then the surface coated with fusion bonded polyurethane, and then add a salt spray resistant and
UV resistant Fluorocarbon paiting as top coating. with such treatment, the valve with very good corrosion resistant in
matine enviroment.

Hot Dip Galvanized thickness test HDG valve Before Painting

Coating corrosion resistant property compare vs Advantages and dis-advantages

Dacromet: Dacromet's main components usually include zinc flakes that form a protective layer, aluminum flakes
enhancing coating compactness and stability, chromate compounds acting as binders and corrosion inhibitors and
reacting with zinc and aluminum flakes, and organic components improving processing performance and flexibility.
advantage:good looking, good resistant in marine environement, good painting adhesion. can be done many layers.
4 layers dacromet treated steel parts salt spray test can be 1000+ hours. with extra painting, the salt spray test time
can be much longger, even double.
disadvantage: costs high.

Hot dip galvanized:

advantage: economy, Thickness 75~120 μm. good resistant in marine environement, 90μm HDG steel parts salt spray
test can be 1000+ hours, with extra painting, the salt spray test time can be much longger.
dis-advantage: not good looking, MOQ no less than 300 sets. thread bolting holes without HDG.

Fusion Bonded Ployurethane +Fluorocarbon Coating: UV (sunshine)resistant, protect dacromet layers or HDG

9
Ball Valve Series

Ball valves are widly used in oil filled transformers, it can be as drain valves, as well as radiator valves. there are
2 PTFE seats on both side of the valve ball, the seats are tightly contact with valve body and ball, form as reliable
sealing. It allows for a smooth and unrestricted flow of media through the valve. Since the valve's passage has a
consistent diameter with the pipeline in full - port designs, there is minimal resistance to the flow. Perma Valves supply
wide range of ball valves, specify by different connections, different structure. basicly we specify our ball valves based
on different connections. Most widly used is flange type, then thread ends and welding type.

Flanged Type Ball Valve

Flange type connection is most popular in industrial pipe connections, it is easy for installation and easy for
replacement and maintanance. Perma Flanged ball valves are divided into 1 piece valve body, 2 pieces valve body, 3
pieces valve body . 1 piece type valve body is normally reduce bore, 2 pieces and 3 pieces body normally full bore.

Body Material: Carbon steel, Stainless Steel, Brass, Bronze

Flange standard: EN1092, GOST 12815,ASME B16.5
Suitable temperature: -30~160℃，-46~160℃，-60~ 160℃
Locking: Option
Standard coating grade:C4
EN/DIN/GOST Sizes: DN15,DN20,DN25,DN40,DN50,DN80,DN100,DN150,DN200
ASME Sizes: 1/2", 3/4", 1", 1.1/2",2", 3", 4", 6", 8"
Customize :Available

Threaded Type Ball Valves

Thread type Ball valves are ball valves with NPT or BSPT/BSP/G thread on both sides, mainly female thread,
but male thread also available. Valve construction can be 1 piece body, 2 pieces body and 3 pieces body.

Body Material: Carbon steel, Stainless Steel, Brass, Bronze

Suitable temperature: -30~160℃，-46~160℃，-60~ 160℃
Locking: Option
Standard coating grade:C4 , stainless steel products without coating
EN/DIN/GOST Sizes: DN15,DN20,DN25,DN40,DN50,DN80
ASME Sizes: 1/2", 3/4", 1", 1.1/2",2", 3",
Customize :Available

10
Ball Valve Series

Welding type Valve

Welding type ball valves normally with welding tubes, can be BW welding or Socket welding. we usually chose 3 pieces
type as welding type ball valve.

Available materials: carbon steel, stainless steel

Availabel sizes: DN15,DN20,DN25,DN32,DN40,DN50,DN80
NPS:1/2",3/4",1",1.1/4",1.1/2",2",3"
Welding type: Butt welding, socket welding

3 Way Ball Valve

3 way ball valves are the valve with 3 connections, and 3 passages. the ball can be T port or L port, by control the
direction of ball, the fluid can be distribute according to seting status. 3 way ball valves also can be flange connection
and thread connection.

Flanged Type
Available materials: carbon steel, stainless steel
Availabel sizes: DN15,DN20,DN25,DN32,DN40,DN50,DN80,DN100,DN150,DN200
NPS:1/2",3/4",1",1.1/4",1.1/2",2",3",4",6",8"
Flange standard: ASME B16.5, EN 1092, GOST 12815/33295
Suitable Temperature: Carbon Steel: -30~160℃， Stainless Steel: -46~160℃，

Thread ConnectionType
Available materials: carbon steel, stainless steel
Availabel sizes: DN15,DN20,DN25,DN32,DN40,DN50,DN80,
NPS:1/2",3/4",1",1.1/4",1.1/2",2",3"
Thread Type: NPT thread, BSP/BSPT thread, G thread etc.
Suitable Temperature: Carbon Steel: -30~160℃， Stainless Steel: -46~160℃，

11
 Gate Valve Series

Stainless Steel Gate Valves & Carbon steel Gate Valve & Bronze Gate Valve

1. Thread ends Stainless steel Gate Valves & Carbon steel Gate Valves

2. Flange ends Stainless steel Gate Valves.

3. Thread ends Brass/bronze Gate Valves

4. Flanged ends Brass/ Bronze Gate Valves

Due to gate valve series with many different types, connections there are flange type and thread ends, Bonnet design
there are OS&Y type and inside screw type, there are thread connection bonnet and bolted bonnet, the materials of
valve also can be various. we do not display all details in this summary catalogue. in case of gate valves inquiry please
contact our sales staff.

12
 Globe Valve Series

Stainless Steel Globe Valve & Carbon Steel Globe Valve & Bronze Globe Valves

Globe valve is a popular choice when transformer designers select drain valves of transformer. Globe valve is the best
choice of drain valve due to it's special fluid passage structure. the fluid get into the valve from inlet, then move upward
through the valve seat then arrive the room of outlet,with this structure bubbles will be difficult to get into the transformer
tank during oil drain process. Perma Valves supply both thread ends globe valves and flange ends globe valves, we
can also customize welding type globe valve, which directly weld with transformer tank. some of the globe valves will be
show on our drain valves catalogue pages due to those are widely used as drain valve in transformer industry.

1. Thread Ends Stainless Steel Globe Valves & Bronze Globe Valves

2. Flanged Stainless steel Globe Valves & carbon steel Globe Valves

3. Bronze / Brass Globe Valves

Globe Valve locking device & position indicator

13
 Drain Valve Series

The oil drain valve of an oil - immersed transformer is a vital component for its maintenance and operation. It drains
the insulating oil during maintenance, repair or component replacement, enabling safe and efficient oil removal from
the transformer tank to support maintenance tasks. The best drain valve type is globe valve due to it's structure avoid
bubbles come into the transformer tank. while Ball valves and Gate Valves are also windly used as drain valve due to
the oil drain efficient is high. Following drain valves are most popular types in international market.

1. DIN 42568 standard Brass drain valve (with oil sampling nipple)

2. Stainless steel Gate valve type drain valve with oil sampler DN25

3. Ball Valve type Single flange drain valve

Available dimensions: NPS 1/2" ,1",1.1/2",2",3",4" DN15,DN25,DN40,DN50,DN80,DN100

Available materials: Carbon Steel, Stainless Steel
Locking device: with/without
Inlet: Flange ASME B16.5/ EN1092/GOST 33259

14
Drain Valve Series

1. NPT thread ends Drain valve with oil sampler 1" forged brass

Material: Forged brass

Connection fitting: Brass / Stainless Steel
End plug: Brass / Stainless Steel

2. NPT thread ends Drain valve with oil sampler 2" forged brass

Material: Forged brass

Connection fitting: Brass / Stainless Steel
End plug: Brass / Stainless Steel

3. Brass Drain Valve without oil sampler

15
 Drain Valve Series

Square flange Drain valve with oil sampler / without sampler

1. Oil sampler located on outlet (new version)

（Oil sampler body and valve body is integral）

2. Oil sampler located on bottom (old version) Valve body and oil sampler separately.

16
Drain valve Series

3. Stainless Steel Drain Valve 1" & 2" with oil sampler / without sampler

This stainless steel Drain valve is customized, mainly for 1" and 2"
Material can be 304 stainless steel, 316 stainless steel or 316L stainless steel. the valve flange and valve body is joint
together by high quality welding, and tested by vacuum. if the working enviroment is high corrosive area,the valve body
can be have further treatment, such as Dacromet treatment, with dacromet the stainless steel will have much better
resistant for high corrosive enviroment, such as marine enviroment. besides, the valve also can be with fusion bonded
fluorocarbon coating.

17
 Oil sampling Devices

There are multiple functions in the device, such as lubricate and washing, waste oil discharge, air
discharge and oil sampling. the application result shows that: this new type of full sealed transfo-
rmer oil sampling device has the advantages of flexible operation, easy to use, safe and reliable, it
radically solves the problem of full sealed transformer oil sampling difficultly in power system,and
greatly improves the work efficiency offull sealed tranasformer oil sampling.

1. NPT thread Oil samplers

Material: Forged Brass

Parts: Body, Trim, Cover, Seat, Chain
Sizes: 1/2" 3/8”
Application : as Oil sampling device ,
fixed with Globe drain valve Ball Drain
valve, Flange, or NPT female thread pipe.

2. Oil sampler with Welding tube

Oil sampling device with welding endWelding connector material: carbon steel/Stainless steelWelding ends: Socket
welding or butt weldingOil sampler Material: forged brassSampler sealing material: Viton,PTFE

3. Flange type oil sampler.

Oil sampling device with welding endWelding connector material: carbon steel/Stainless steelWelding ends: Socket
welding or butt weldingOil sampler Material: forged brassSampler sealing material: Viton,PTFE

18
Check valve Series

Check valve is a device make sure the transformer oil flow direction as it should be. it protect the oil pump and
the whole cooling pipe system. the check valve normally install on the outlet of oil pump of Forced oil circulation
transformer. there are two types of check valves, dual plate check valve and single disc swing check valve.

Dual Plate Check Valve

Material: Carbon Steel, Stainless Steel. Bronze

Connection: Wafer/ Flange
Customize: Available

Single Disc swing check Valve Flange type.

Single Disc swing check Valve Wafer type.

19
 Rubber seals Series

The rubber seals for oil-immersed transformers are essential components to ensure the normal
operation of transformers. They prevent the leakage of transformer oil, ensuring that the oil remains
within the oil tank to play its roles in cooling and insulating.They isolate the internal components
of the transformer from the outside world, preventing external dust, moisture and other impurities
from entering the transformer and affecting its performance and service life.

Material introduction
NBR/HNBR

Doubel line type Gasket Flat Gasket

NBR/HNBR have good performance in transformer oil, and can be work well with cold enviroment. However,
NBR rubber does not perform well in terms of heating aging resistance and UV aging resistance

ACM

Doubel line type Gasket Irregular-shaped Gasket

ACM have wonderful performance in transformer oil and have very good heating resistance and UV
light (sunshine) resistance.

Viton & Fluorosilicone

Viton and Fluorosilicone rubber seals both have wonderful performance in transformer oil and have
very good heating resistance and UV light (sunshine) resistance. however, normal type viton do not
suitable for low temperature, normal type shall be no less than -20℃ . Customized low temperature
type viton can be suitable for -30℃ . Fluorosilicone rubber suitable for -60℃ ~250℃ .

20