0% found this document useful (0 votes)
2 views40 pages

3 Mechanical_Report

The document outlines a project saved between June 9 and June 25, 2023, using product version 2022 R1. It includes detailed information on the model's geometry, materials, coordinate systems, and various analysis settings for static structural, modal, and harmonic response analyses. Additionally, it provides specifications for unit systems, geometry imports, and properties of different body groups within the model.
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
2 views40 pages

3 Mechanical_Report

The document outlines a project saved between June 9 and June 25, 2023, using product version 2022 R1. It includes detailed information on the model's geometry, materials, coordinate systems, and various analysis settings for static structural, modal, and harmonic response analyses. Additionally, it provides specifications for unit systems, geometry imports, and properties of different body groups within the model.
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 40

Project*

First Saved Friday, June 9, 2023


Last Saved Sunday, June 25, 2023
Product Version 2022 R1
Save Project Before Solution No
Save Project After Solution No
Contents
 Units

 Model (A4, B4, C4)


o Geometry Imports
 Geometry Import (A3, B3, C3)
o Geometry
 Body Groups
 Parts
 Parts
 Parts
 Parts
o Materials
o Coordinate Systems
o Remote Points
 Remote Point
o Connections
 Contacts
 Contact Regions
o Mesh
o Static Structural (A5)
 Analysis Settings
 Loads
 Solution (A6)
 Solution Information
 Results
o Modal (B5)
 Pre-Stress (Static Structural)
 Analysis Settings
 Solution (B6)
 Solution Information
 Results
o Harmonic Response (C5)
 Modal (Modal)
 Analysis Settings
 Remote Force
 Solution (C6)
 Solution Information
 Result Charts
o Solution Combination
 Results

 Material Data
o Structural Steel
o Gray Cast Iron

Units
TABLE 1
Unit System Metric (mm, kg, N, s, mV, mA) Degrees rad/s Celsius
Angle Degrees
Rotational Velocity rad/s
Temperature Celsius

Model (A4, B4, C4)


TABLE 2
Model (A4, B4, C4) > Geometry Imports
Geometry
Object Name
Imports
State Solved

TABLE 3
Model (A4, B4, C4) > Geometry Imports > Geometry Import (A3, B3, C3)
Object
Geometry Import (A3, B3, C3)
Name
State Solved
Definition
Source C:\AQWA_PRACTICE\homework_3\bracket_1b_full_modal_harmonic_sweep_files\dp0\SYS\DM\SYS.scdoc
Type SpaceClaim
Basic Geometry Options
Solid
Yes
Bodies
Surface
Yes
Bodies
Line Bodies Yes
Parameters Independent
Parameter
Key
Attributes Yes
Attribute
Key
Named
Yes
Selections
Named
Selection
Key
Material
Yes
Properties
Advanced Geometry Options
Use
Associativit Yes
y
Coordinate
Yes
Systems
Coordinate
System Key
Reader
Mode
Saves No
Updated
File
Use
Yes
Instances
Smart CAD
Yes
Update
Compare
Parts On No
Update
Compare
Parts Tight
Tolerance
Analysis
3-D
Type
Mixed
Import None
Resolution
Import
Facet Source
Quality
Clean
Bodies On No
Import
Stitch
Surfaces None
On Import
Stitch
0.0000001
Tolerance
Decompose
Disjoint Yes
Geometry
Enclosure
and
Yes
Symmetry
Processing

Geometry
TABLE 4
Model (A4, B4, C4) > Geometry
Object
Geometry
Name
State Fully Defined
Definition
Source C:\AQWA_PRACTICE\homework_3\bracket_1c_full_modal_harmonic_files\dp0\SYS\DM\SYS.scdoc
Type SpaceClaim
Length Unit Meters
Element
Program Controlled
Control
Display
Body Color
Style
Bounding Box
Length X 131.9 mm
Length Y 138.99 mm
Length Z 175.44 mm
Properties
Volume 5.9843e+005 mm³
Mass 4.5066 kg
Scale
Factor 1.
Value
Statistics
Bodies 16
Active
16
Bodies
Nodes 279729
Elements 76807
Mesh Metric Element Quality
Min 4.7543e-002
Max 0.99998
Average 0.8336
Standard
0.13926
Deviation
Update Options
Assign
Default No
Material
Basic Geometry Options
Solid
Yes
Bodies
Surface
Yes
Bodies
Line Bodies Yes
Parameters Independent
Parameter
Key
Attributes Yes
Attribute
Key
Named
Yes
Selections
Named
Selection
Key
Material Yes
Properties
Advanced Geometry Options
Use
Associativit Yes
y
Coordinate
Yes
Systems
Coordinate
System Key
Reader
Mode
Saves No
Updated
File
Use
Yes
Instances
Smart CAD
Yes
Update
Compare
Parts On No
Update
Analysis
3-D
Type
Mixed
Import None
Resolution
Import
Facet Source
Quality
Clean
Bodies On No
Import
Stitch
Surfaces None
On Import
Decompose
Disjoint Yes
Geometry
Enclosure
and
Yes
Symmetry
Processing

TABLE 5
Model (A4, B4, C4) > Geometry > Body Groups
Object Name First ring Inner body Sleeve MainBody
State Meshed
Graphics Properties
Visible Yes
Definition
Suppressed No
Assignment Structural Steel Gray Cast Iron
Coordinate System Default Coordinate System
Bounding Box
Length X 52.64 mm 45. mm 131.9 mm
Length Y 90. mm 82.5 mm 19.954 mm 138.99 mm
Length Z 90. mm 82.5 mm 20. mm 175.44 mm
Properties
2.3948e+005
Volume 53488 mm³ 11576 mm³ 2.9388e+005 mm³
mm³
Mass 0.41988 kg 1.8799 kg 9.0873e-002 kg 2.1159 kg
Centroid X 2.6021e-015 mm -0.39913 mm 12.5 mm 2.9247 mm
Centroid Y 1.8125e-015 mm 2.7276 mm -4.2385 mm -17.851 mm
Centroid Z 7.8063e-015 mm 2.8898e-010 mm 2.9525e-008 mm 8.5329 mm
Moment of Inertia Ip1 778.51 kg·mm² 1686.4 kg·mm² 5.5852 kg·mm² 9265.3 kg·mm²
Moment of Inertia Ip2 486.44 kg·mm² 1310.3 kg·mm² 18.091 kg·mm² 9994.4 kg·mm²
Moment of Inertia Ip3 485.9 kg·mm² 1252.7 kg·mm² 18.11 kg·mm² 2312.9 kg·mm²
Statistics
Nodes 93300 126878 39320 20231
Elements 19200 38354 8400 10853
Mesh Metric Element Quality
Min 0.80149 0.12158 0.88475 4.7543e-002
Max 0.81321 0.99998 0.98896 0.99819
Average 0.80743 0.84975 0.94838 0.73402
Standard Deviation 4.9258e-003 0.16522 2.8077e-002 0.13371
CAD Attributes
PartTolerance: 0.00000001
Color:175.143.175
Color:159.175.143
Color:143.143.175
Color:175.159.143

TABLE 6
Model (A4, B4, C4) > Geometry > First ring > Parts
First
Object Name First ring1 First ring11 First ring111
ring11
State Meshed
Graphics Properties
Visible Yes
Transparency 1
Definition
Suppressed No
Stiffness Behavior Flexible
Coordinate System Default Coordinate System
Reference Temperature By Environment
Treatment None
Material
Assignment Structural Steel
Nonlinear Effects Yes
Thermal Strain Effects Yes
Bounding Box
Length X 26.32 mm
Length Y 90. mm
Length Z 45. mm
Properties
Volume 13372 mm³
Mass 0.10497 kg
Centroid X -13.16 mm 13.16 mm
Centroid Y -3.3048e-016 mm 0. mm 7.8696e-015 mm -2.8917e-016 mm
Centroid Z -27.418 mm 27.418 mm -27.418 mm 27.418 mm
Moment of Inertia Ip1 115.72 kg·mm²
Moment of Inertia Ip2 24.521 kg·mm²
Moment of Inertia Ip3 103.3 kg·mm²
Statistics
Nodes 24083
Elements 4800
Mesh Metric Element Quality
Min 0.80149
Max 0.81321
Average 0.80743
Standard Deviation 4.9262e-003

TABLE 7
Model (A4, B4, C4) > Geometry > Inner body > Parts
Inner Inner Inner Inner
Object Name
body1 body11 body11 body111
State Meshed
Graphics Properties
Visible Yes
Transparency 1
Definition
Suppressed No
Stiffness Behavior Flexible
Coordinate System Default Coordinate System
Reference Temperature By Environment
Treatment None
Material
Assignment Structural Steel
Nonlinear Effects Yes
Thermal Strain Effects Yes
Bounding Box
Length X 26.32 mm
Length Y 82.5 mm
Length Z 41.25 mm
Properties
Volume 61188 mm³ 58553 mm³
Mass 0.48033 kg 0.45964 kg
Centroid X -13.374 mm 13.16 mm
Centroid Y 2.5806 mm 2.8812 mm
Centroid Z -18.242 mm 18.242 mm -18.867 mm 18.867 mm
Moment of Inertia Ip1 262.82 kg·mm² 256.94 kg·mm²
Moment of Inertia Ip2 85.465 kg·mm² 79.991 kg·mm²
Moment of Inertia Ip3 231.97 kg·mm² 229.81 kg·mm²
Statistics
Nodes 12992 13141 53762 54030
Elements 7298 7408 11792 11856
Mesh Metric Element Quality
Min 0.16511 0.12158 0.55421 0.60649
Max 0.99987 0.9984 0.99957 0.99998
Average 0.70089 0.70141 0.94373 0.94059
Standard Deviation 0.16274 0.16353 7.0525e-002 7.6967e-002

TABLE 8
Model (A4, B4, C4) > Geometry > Sleeve > Parts
Object Name Sleeve1 Sleeve11 Sleeve11 Sleeve111
State Meshed
Graphics Properties
Visible Yes
Transparency 1
Definition
Suppressed No
Stiffness Behavior Flexible
Coordinate System Default Coordinate System
Reference Temperature By Environment
Treatment None
Material
Assignment Structural Steel
Nonlinear Effects Yes
Thermal Strain Effects Yes
Bounding Box
Length X 10. mm 35. mm
Length Y 19.954 mm
Length Z 10. mm
Properties
Volume 1286.2 mm³ 4501.9 mm³
Mass 1.0097e-002 kg 3.534e-002 kg
Centroid X -5. mm 17.5 mm
Centroid Y -4.2385 mm
Centroid Z -4.9289 mm 4.9289 mm -4.9289 mm 4.9289 mm
Moment of Inertia Ip1 0.37527 kg·mm² 1.3135 kg·mm²
Moment of Inertia Ip2 0.14692 kg·mm² 3.8153 kg·mm²
Moment of Inertia Ip3 0.39603 kg·mm² 4.6872 kg·mm²
Statistics
Nodes 5121 15615
Elements 1000 3200
Mesh Metric Element Quality
Min 0.88475 0.89178
Max 0.98237 0.98896
Average 0.94226 0.95029
Standard Deviation 2.8477e-002 2.7682e-002

TABLE 9
Model (A4, B4, C4) > Geometry > MainBody > Parts
Object Name MainBody1 MainBody11 MainBody11 MainBody111
State Meshed
Graphics Properties
Visible Yes
Transparency 1
Definition
Suppressed No
Stiffness Behavior Flexible
Coordinate System Default Coordinate System
Reference Temperature By Environment
Treatment None
Material
Assignment Gray Cast Iron
Nonlinear Effects Yes
Thermal Strain Effects Yes
Bounding Box
Length X 65.957 mm
Length Y 126.23 mm 125. mm 126.23 mm 125. mm
Length Z 107.17 mm 106.66 mm 107.17 mm 106.66 mm
Properties
Volume 73471 mm³ 73470 mm³
Mass 0.52899 kg
Centroid X -19.409 mm -20.783 mm 22.834 mm 29.057 mm
Centroid Y -6.3726 mm -13.8 mm -12.714 mm -38.518 mm
Centroid Z -47.145 mm 54.246 mm -56.878 mm 83.91 mm
298.32
Moment of Inertia Ip1 567.87 kg·mm² 229.08 kg·mm² 0. kg·mm²
kg·mm²
78.358
Moment of Inertia Ip2 247.42 kg·mm² 73.296 kg·mm² 62.753 kg·mm²
kg·mm²
223.48
Moment of Inertia Ip3 680.73 kg·mm² 182.3 kg·mm² 0. kg·mm²
kg·mm²
Statistics
Nodes 5295 5460 5213 5161
Elements 2715 2813 2689 2636
Mesh Metric Element Quality
Min 4.7543e-002 4.7604e-002 4.7971e-002 4.7747e-002
Max 0.99782 0.99478 0.99819 0.99365
Average 0.73074 0.73584 0.7352 0.73426
Standard Deviation 0.13482 0.13342 0.13424 0.13233

TABLE 10
Model (A4, B4, C4) > Materials
Object Name Materials
State Fully Defined
Statistics
Materials 2
Material
0
Assignments

Coordinate Systems
TABLE 11
Model (A4, B4, C4) > Coordinate Systems > Coordinate System
Global Coordinate
Object Name
System
State Fully Defined
Definition
Type Cartesian
Coordinate System ID 0.
Origin
Origin X 0. mm
Origin Y 0. mm
Origin Z 0. mm
Directional Vectors
X Axis Data [ 1. 0. 0. ]
Y Axis Data [ 0. 1. 0. ]
Z Axis Data [ 0. 0. 1. ]

Remote Points
TABLE 12
Model (A4, B4, C4) > Remote Points
Remote
Object Name
Points
State Fully Defined

TABLE 13
Model (A4, B4, C4) > Remote Points > Remote Point
Object Name Remote Point
State Fully Defined
Scope
Scoping Method Geometry Selection
Geometry 2 Faces
Coordinate System Global Coordinate System
X Coordinate 500. mm
Y Coordinate 0. mm
Z Coordinate 0. mm
Location Defined
Definition
Suppressed No
Behavior Deformable
Pinball Region All
DOF Selection Program Controlled
Pilot Node APDL
Name

Connections
TABLE 14
Model (A4, B4, C4) > Connections
Object Name Connections
State Fully Defined
Auto Detection
Generate Automatic Connection On Refresh Yes
Transparency
Enabled Yes

TABLE 15
Model (A4, B4, C4) > Connections > Contacts
Object Name Contacts
State Fully Defined
Definition
Connection Type Contact
Scope
Scoping Method Geometry Selection
Geometry All Bodies
Auto Detection
Tolerance Type Slider
Tolerance Slider 0.
Tolerance Value 0.6495 mm
Use Range No
Face/Face Yes
Face-Face Angle
75. °
Tolerance
Face Overlap Tolerance Off
Cylindrical Faces Include
Face/Edge No
Edge/Edge No
Priority Include All
Group By Bodies
Search Across Bodies
Statistics
Connections 16
Active Connections 16

TABLE 16
Model (A4, B4, C4) > Connections > Contacts > Contact Regions
Contac Contac
Contac Contact Contact
Object Contact t Contact t Contact Contact Contact Contact
t Region Region
Name Region 2 Region Region 4 Region Region 6 Region 7 Region 9 Region 10
Region 8 11
3 5
State Fully Defined
Scope
Scoping
Geometry Selection
Method
Contact 1 Face 3 Faces
Target 1 Face 3 Faces
Contact Inner
First ring1 First ring11 First ring111
Bodies body1
Target Inner Inner Inner Inner
MainBody1 MainBody11 MainBody1 MainBody11 MainBody11 MainBody111 Sleeve1
Bodies body1 body11 body11 body111
Protected No
Definition
Type Bonded
Scope
Automatic
Mode
Behavior Program Controlled
Trim
Program Controlled
Contact
Trim
0.6495 mm
Tolerance
Suppressed No
Advanced
Formulation Program Controlled
Small
Program Controlled
Sliding
Detection
Program Controlled
Method
Penetration
Program Controlled
Tolerance
Elastic Slip
Program Controlled
Tolerance
Normal
Program Controlled
Stiffness
Update
Program Controlled
Stiffness
Pinball
Program Controlled
Region
Geometric Modification
Contact
Geometry None
Correction
Target
Geometry None
Correction

TABLE 17
Model (A4, B4, C4) > Connections > Contacts > Contact Regions
Contact Contact Contact Contact Contact
Object Name
Region 12 Region 13 Region 14 Region 15 Region 16
State Fully Defined
Scope
Scoping Method Geometry Selection
Contact 1 Face 3 Faces 1 Face 2 Faces
Target 1 Face 3 Faces 1 Face 2 Faces
Contact Bodies Inner body1 Inner body11 Inner body111
Target Bodies Sleeve11 Sleeve111 Sleeve11 Sleeve111
Protected No
Definition
Type Bonded
Scope Mode Automatic
Behavior Program Controlled
Trim Contact Program Controlled
Trim Tolerance 0.6495 mm
Suppressed No
Advanced
Formulation Program Controlled
Small Sliding Program Controlled
Detection Method Program Controlled
Penetration Tolerance Program Controlled
Elastic Slip Tolerance Program Controlled
Normal Stiffness Program Controlled
Update Stiffness Program Controlled
Pinball Region Program Controlled
Geometric Modification
Contact Geometry
None
Correction
Target Geometry
None
Correction
Mesh
TABLE 18
Model (A4, B4, C4) > Mesh
Object Name Mesh
State Solved
Display
Display Style Use Geometry Setting
Defaults
Physics Preference Mechanical
Element Order Quadratic
Element Size Default
Sizing
Use Adaptive Sizing Yes
Resolution 5
Mesh Defeaturing Yes
Defeature Size Default
Transition Fast
Span Angle Center Coarse
Initial Size Seed Assembly
Bounding Box Diagonal 259.8 mm
Average Surface Area 730.94 mm²
Minimum Edge Length 2.0068 mm
Quality
Check Mesh Quality Yes, Errors
Error Limits Aggressive Mechanical
Target Element Quality Default (5.e-002)
Smoothing Medium
Mesh Metric Element Quality
Min 4.7543e-002
Max 0.99998
Average 0.8336
Standard Deviation 0.13926
Inflation
Use Automatic Inflation None
Inflation Option Smooth Transition
Transition Ratio 0.272
Maximum Layers 5
Growth Rate 1.2
Inflation Algorithm Pre
View Advanced Options No
Advanced
Number of CPUs for Parallel Part Meshing Program Controlled
Straight Sided Elements No
Rigid Body Behavior Dimensionally Reduced
Triangle Surface Mesher Program Controlled
Topology Checking Yes
Pinch Tolerance Please Define
Generate Pinch on Refresh No
Statistics
Nodes 279729
Elements 76807

FIGURE 1
Model (A4, B4, C4) > Mesh > Figure

Static Structural (A5)


TABLE 19
Model (A4, B4, C4) > Analysis
Static Structural
Object Name
(A5)
State Solved
Definition
Physics Type Structural
Analysis Type Static Structural
Solver Target Mechanical APDL
Options
Environment Temperature 22. °C
Generate Input Only No

TABLE 20
Model (A4, B4, C4) > Static Structural (A5) > Analysis Settings
Object Name Analysis Settings
State Fully Defined
Restart Analysis
Restart Type Program Controlled
Status Done
Step Controls
Number Of
2.
Steps
Current Step
2.
Number
Step End
2. s
Time
Auto Time
Program Controlled
Stepping
Solver Controls
Solver Type Program Controlled
Weak Springs Off
Solver Pivot
Program Controlled
Checking
Large
Off
Deflection
Inertia Relief Off
Quasi-Static
Off
Solution
Rotordynamics Controls
Coriolis Effect Off
Restart Controls
Generate
Program Controlled
Restart Points
Retain Files
After Full Yes
Solve
Combine
Program Controlled
Restart Files
Nonlinear Controls
Newton-
Raphson Program Controlled
Option
Force
Program Controlled
Convergence
Moment
Program Controlled
Convergence
Displacement
Program Controlled
Convergence
Rotation
Program Controlled
Convergence
Line Search Program Controlled
Stabilization Program Controlled
Advanced
Inverse
No
Option
Contact Split
Off
(DMP)
Output Controls
Stress Yes
Surface
No
Stress
Back Stress No
Strain Yes
Contact Data Yes
Nonlinear
No
Data
Nodal Forces No
Volume and
Yes
Energy
Euler Angles Yes
General
Miscellaneou No
s
Contact
Miscellaneou No
s
Store Results
All Time Points
At
Result File
Program Controlled
Compression
Analysis Data Management
Solver Files
C:\AQWA_PRACTICE\homework_3\bracket_1c_full_modal_harmonic_files\dp0\SYS\MECH\
Directory
Future
Prestressed analysis
Analysis
Scratch
Solver Files
Directory
Save MAPDL
No
db
Contact
Program Controlled
Summary
Delete
Unneeded Yes
Files
Nonlinear
No
Solution
Solver Units Active System
Solver Unit
nmm
System

TABLE 21
Model (A4, B4, C4) > Static Structural (A5) > Analysis Settings
Step-Specific "Step Controls"
Step Step End Time
1 1. s
2 2. s
TABLE 22
Model (A4, B4, C4) > Static Structural (A5) > Loads
Fixed Frictionless
Object Name Remote Force
Support Support
State Fully Defined
Scope
Scoping Method Remote Point Geometry Selection
Remote Points Remote Point
Coordinate System Global Coordinate System
X Coordinate 500. mm
Y Coordinate 0. mm
Z Coordinate 0. mm
Location Defined
Geometry 4 Faces
Definition
Type Remote Force Fixed Support Frictionless Support
Define By Components
X Component Tabular Data
Y Component Tabular Data
Z Component 0. N (ramped)
Suppressed No
Behavior Deformable
Tabular Data
Independent Variable Time
Advanced
Pinball Region All

FIGURE 2
Model (A4, B4, C4) > Static Structural (A5) > Remote Force

TABLE 23
Model (A4, B4, C4) > Static Structural (A5) > Remote Force
Steps Time [s] X [N] Y [N] Z [N]
0. 0. = 0.
1 0.
1. -5000. 0.
2 2. 0. -5000. = 0.
FIGURE 3
Model (A4, B4, C4) > Static Structural (A5) > Remote Force > Figure

Solution (A6)
TABLE 24
Model (A4, B4, C4) > Static Structural (A5) > Solution
Solution
Object Name
(A6)
State Solved
Adaptive Mesh Refinement
Max Refinement Loops 5.
Refinement Depth 3.
Information
Status Done
MAPDL Elapsed Time 59. s
MAPDL Memory Used 2.418 GB
MAPDL Result File Size 129.69 MB
Post Processing
Beam Section Results No
On Demand Stress/Strain No

TABLE 25
Model (A4, B4, C4) > Static Structural (A5) > Solution (A6) > Solution Information
Solution
Object Name
Information
State Solved
Solution Information
Solution Output Solver Output
Newton-Raphson Residuals 0
Identify Element Violations 0
Update Interval 2.5 s
Display Points All
FE Connection Visibility
Activate Visibility Yes
Display All FE Connectors
Draw Connections Attached To All Nodes
Line Color Connection Type
Visible on Results No
Line Thickness Single
Display Type Lines

TABLE 26
Model (A4, B4, C4) > Static Structural (A5) > Solution (A6) > Results
Total
Object Name Equivalent Stress
Deformation
State Solved
Scope
Scoping Method Geometry Selection
Geometry All Bodies
Definition
Total
Type Equivalent (von-Mises) Stress
Deformation
By Time
Display Time Last
Calculate Time History Yes
Identifier
Suppressed No
Results
Minimum 0. mm 5.7863e-002 MPa
Maximum 0.142 mm 1765.1 MPa
Average 2.5504e-002 mm 67.703 MPa
Minimum Occurs On MainBody1 MainBody11
Maximum Occurs On Sleeve11 Inner body111
Minimum Value Over Time
Minimum 0. mm 4.9337e-003 MPa
Maximum 0. mm 5.7863e-002 MPa
Maximum Value Over Time
Minimum 5.2246e-003 mm 25.12 MPa
Maximum 0.142 mm 1765.1 MPa
Information
Time 2. s
Load Step 2
Substep 1
Iteration Number 2
Integration Point Results
Display Option Averaged
Average Across Bodies No
FIGURE 4
Model (A4, B4, C4) > Static Structural (A5) > Solution (A6) > Total Deformation

TABLE 27
Model (A4, B4, C4) > Static Structural (A5) > Solution (A6) > Total Deformation
Time [s] Minimum [mm] Maximum [mm] Average [mm]
1. 5.2246e-003 3.5265e-003
0.
2. 0.142 2.5504e-002

FIGURE 5
Model (A4, B4, C4) > Static Structural (A5) > Solution (A6) > Equivalent Stress

TABLE 28
Model (A4, B4, C4) > Static Structural (A5) > Solution (A6) > Equivalent Stress
Time [s] Minimum [MPa] Maximum [MPa] Average [MPa]
1. 4.9337e-003 25.12 2.4215
2. 5.7863e-002 1765.1 67.703

Modal (B5)
TABLE 29
Model (A4, B4, C4) > Analysis
Object Name Modal (B5)
State Solved
Definition
Physics Type Structural
Analysis Type Modal
Solver Target Mechanical APDL
Options
Generate Input Only No

TABLE 30
Model (A4, B4, C4) > Modal (B5) > Initial Condition
Pre-Stress (Static
Object Name
Structural)
State Fully Defined
Definition
Pre-Stress Environment Static Structural
Pre-Stress Define By Program Controlled
Reported Loadstep Last
Reported Substep Last
Reported Time End Time
Contact Status Use True Status
Newton-Raphson Option Program Controlled

TABLE 31
Model (A4, B4, C4) > Modal (B5) > Analysis Settings
Object Name Analysis Settings
State Fully Defined
Options
Max Modes to
12
Find
Limit Search to
No
Range
On Demand
No
Expansion
Spin Softening Program Controlled
Solver Controls
Damped No
Solver Type Program Controlled
Rotordynamics Controls
Coriolis Effect Off
Campbell
Off
Diagram
Output Controls
Stress Yes
Surface Stress No
Back Stress No
Strain Yes
Contact Data No
Nodal Forces Constrained Nodes
Volume and No
Energy
Euler Angles No
Calculate
Yes
Reactions
Store Modal
Program Controlled
Results
General
No
Miscellaneous
Result File
Program Controlled
Compression
Analysis Data Management
Solver Files C:\AQWA_PRACTICE\homework_3\bracket_1c_full_modal_harmonic_files\dp0\SYS-
Directory 5\MECH\
Future Analysis MSUP Analyses
Scratch Solver
Files Directory
Save MAPDL
Yes
db
Contact
Program Controlled
Summary
Delete
Yes
Unneeded Files
Solver Units Active System
Solver Unit
nmm
System

Solution (B6)
TABLE 32
Model (A4, B4, C4) > Modal (B5) > Solution
Solution
Object Name
(B6)
State Solved
Adaptive Mesh Refinement
Max Refinement Loops 1.
Refinement Depth 2.
Information
Status Done
MAPDL Elapsed Time 9 m 13 s
MAPDL Memory Used 32.786 GB
MAPDL Result File
525.19 MB
Size
Post Processing
Beam Section Results No

The following bar chart indicates the frequency at each calculated mode.
FIGURE 6
Model (A4, B4, C4) > Modal (B5) > Solution (B6)

TABLE 33
Model (A4, B4, C4) > Modal (B5) > Solution (B6)
Mode Frequency [Hz]
1. 2440.
2. 2917.3
3. 4307.6
4. 5984.3
5. 7613.8
6. 7625.1
7. 7825.9
8. 7860.8
9. 8174.6
10. 8948.5
11. 9741.8
12. 11501

TABLE 34
Model (A4, B4, C4) > Modal (B5) > Solution (B6) > Solution Information
Solution
Object Name
Information
State Solved
Solution Information
Solution Output Solver Output
Newton-Raphson Residuals 0
Identify Element Violations 0
Update Interval 2.5 s
Display Points All
FE Connection Visibility
Activate Visibility Yes
Display All FE Connectors
Draw Connections Attached To All Nodes
Line Color Connection Type
Visible on Results No
Line Thickness Single
Display Type Lines

TABLE 35
Model (A4, B4, C4) > Modal (B5) > Solution (B6) > Results
Total Total Total Total Total Total Total Total Total Total
ct
Deformatio Deformatio Deformatio Deformatio Deformatio Deformatio Deformatio Deformatio Deformatio Deformatio D
e
n n2 n3 n4 n5 n6 n7 n8 n9 n 10
e Solved
Scope
g
Geometry Selection
d
ry All Bodies
Definition
e Total Deformation
e 1. 2. 3. 4. 5. 6. 7. 8. 9. 10.
er
d No
Results
m 0. mm
m 17.188 mm 32.251 mm 49.2 mm 55.531 mm 258.84 mm 257.07 mm 211.8 mm 205.49 mm 30.75 mm 24.764 mm 8
0.95251
e 15.264 mm 14.682 mm 10.431 mm 14.098 mm 0.9094 mm 3.8146 mm 5.0338 mm 11.914 mm 14.993 mm 8
mm
m
MainBody1
n
m Inner MainBody1 MainBody111 MainBody1 MainBody11 MainBody1 Sleeve11 M
n body11
Information
cy 2440. Hz 2917.3 Hz 4307.6 Hz 5984.3 Hz 7613.8 Hz 7625.1 Hz 7825.9 Hz 7860.8 Hz 8174.6 Hz 8948.5 Hz 9

TABLE 36
Model (A4, B4, C4) > Modal (B5) > Solution (B6) > Total Deformation
Mode Frequency [Hz]
1. 2440.
2. 2917.3
3. 4307.6
4. 5984.3
5. 7613.8
6. 7625.1
7. 7825.9
8. 7860.8
9. 8174.6
10. 8948.5
11. 9741.8
12. 11501
TABLE 37
Model (A4, B4, C4) > Modal (B5) > Solution (B6) > Total Deformation 2
Mode Frequency [Hz]
1. 2440.
2. 2917.3
3. 4307.6
4. 5984.3
5. 7613.8
6. 7625.1
7. 7825.9
8. 7860.8
9. 8174.6
10. 8948.5
11. 9741.8
12. 11501

TABLE 38
Model (A4, B4, C4) > Modal (B5) > Solution (B6) > Total Deformation 3
Mode Frequency [Hz]
1. 2440.
2. 2917.3
3. 4307.6
4. 5984.3
5. 7613.8
6. 7625.1
7. 7825.9
8. 7860.8
9. 8174.6
10. 8948.5
11. 9741.8
12. 11501

TABLE 39
Model (A4, B4, C4) > Modal (B5) > Solution (B6) > Total Deformation 4
Mode Frequency [Hz]
1. 2440.
2. 2917.3
3. 4307.6
4. 5984.3
5. 7613.8
6. 7625.1
7. 7825.9
8. 7860.8
9. 8174.6
10. 8948.5
11. 9741.8
12. 11501

TABLE 40
Model (A4, B4, C4) > Modal (B5) > Solution (B6) > Total Deformation 5
Mode Frequency [Hz]
1. 2440.
2. 2917.3
3. 4307.6
4. 5984.3
5. 7613.8
6. 7625.1
7. 7825.9
8. 7860.8
9. 8174.6
10. 8948.5
11. 9741.8
12. 11501

TABLE 41
Model (A4, B4, C4) > Modal (B5) > Solution (B6) > Total Deformation 6
Mode Frequency [Hz]
1. 2440.
2. 2917.3
3. 4307.6
4. 5984.3
5. 7613.8
6. 7625.1
7. 7825.9
8. 7860.8
9. 8174.6
10. 8948.5
11. 9741.8
12. 11501

TABLE 42
Model (A4, B4, C4) > Modal (B5) > Solution (B6) > Total Deformation 7
Mode Frequency [Hz]
1. 2440.
2. 2917.3
3. 4307.6
4. 5984.3
5. 7613.8
6. 7625.1
7. 7825.9
8. 7860.8
9. 8174.6
10. 8948.5
11. 9741.8
12. 11501

TABLE 43
Model (A4, B4, C4) > Modal (B5) > Solution (B6) > Total Deformation 8
Mode Frequency [Hz]
1. 2440.
2. 2917.3
3. 4307.6
4. 5984.3
5. 7613.8
6. 7625.1
7. 7825.9
8. 7860.8
9. 8174.6
10. 8948.5
11. 9741.8
12. 11501

TABLE 44
Model (A4, B4, C4) > Modal (B5) > Solution (B6) > Total Deformation 9
Mode Frequency [Hz]
1. 2440.
2. 2917.3
3. 4307.6
4. 5984.3
5. 7613.8
6. 7625.1
7. 7825.9
8. 7860.8
9. 8174.6
10. 8948.5
11. 9741.8
12. 11501

TABLE 45
Model (A4, B4, C4) > Modal (B5) > Solution (B6) > Total Deformation 10
Mode Frequency [Hz]
1. 2440.
2. 2917.3
3. 4307.6
4. 5984.3
5. 7613.8
6. 7625.1
7. 7825.9
8. 7860.8
9. 8174.6
10. 8948.5
11. 9741.8
12. 11501

TABLE 46
Model (A4, B4, C4) > Modal (B5) > Solution (B6) > Total Deformation 11
Mode Frequency [Hz]
1. 2440.
2. 2917.3
3. 4307.6
4. 5984.3
5. 7613.8
6. 7625.1
7. 7825.9
8. 7860.8
9. 8174.6
10. 8948.5
11. 9741.8
12. 11501

TABLE 47
Model (A4, B4, C4) > Modal (B5) > Solution (B6) > Results
Total Deformation
Object Name
12
State Solved
Scope
Scoping Method Geometry Selection
Geometry All Bodies
Definition
Type Total Deformation
Mode 12.
Identifier
Suppressed No
Results
Minimum 0. mm
Maximum 191.28 mm
Average 3.6002 mm
Minimum Occurs On MainBody1
Maximum Occurs On MainBody1
Information
Frequency 11501 Hz

TABLE 48
Model (A4, B4, C4) > Modal (B5) > Solution (B6) > Total Deformation 12
Mode Frequency [Hz]
1. 2440.
2. 2917.3
3. 4307.6
4. 5984.3
5. 7613.8
6. 7625.1
7. 7825.9
8. 7860.8
9. 8174.6
10. 8948.5
11. 9741.8
12. 11501

Harmonic Response (C5)


TABLE 49
Model (A4, B4, C4) > Analysis
Harmonic Response
Object Name
(C5)
State Solved
Definition
Physics Type Structural
Analysis Type Harmonic Response
Solver Target Mechanical APDL
Options
Generate Input Only No

TABLE 50
Model (A4, B4, C4) > Harmonic Response (C5) > Initial Condition
Object Name Modal (Modal)
State Fully Defined
Definition
Modal Environment Modal
Pre-Stress Environment Static Structural

TABLE 51
Model (A4, B4, C4) > Harmonic Response (C5) > Analysis Settings
Object Name Analysis Settings
State Fully Defined
Step Controls
Multiple RPMs No
Options
Frequency
Linear
Spacing
Range Minimum 2000. Hz
Range
1.75e+005 Hz
Maximum
Solution
100
Intervals
User Defined
Off
Frequencies
Solution Method Mode Superposition
Include Residual
No
Vector
Cluster Results No
On Demand
No
Expansion
Store Results At
Yes
All Frequencies
Rotordynamics Controls
Coriolis Effect Off
Output Controls
Stress Yes
Surface Stress No
Back Stress No
Strain Yes
Contact Data Yes
Nodal Forces No
Volume and
Yes
Energy
Euler Angles Yes
Calculate
Yes
Reactions
General
No
Miscellaneous
Expand Results
Program Controlled
From
-- Expansion Modal Solution
Result File
Program Controlled
Compression
Damping Controls
Eqv. Damping
Ratio From No
Modal
Damping Define
Damping Ratio
By
Damping Ratio 0.
Stiffness
Coefficient Direct Input
Define By
Stiffness
0.
Coefficient
Mass Coefficient 0.
Analysis Data Management
Solver Files C:\AQWA_PRACTICE\homework_3\bracket_1c_full_modal_harmonic_files\dp0\SYS-
Directory 7\MECH\
Future Analysis None
Scratch Solver
Files Directory
Save MAPDL db No
Contact
Program Controlled
Summary
Delete
Yes
Unneeded Files
Solver Units Active System
Solver Unit
nmm
System

TABLE 52
Model (A4, B4, C4) > Harmonic Response (C5) > Loads
Object Name Remote Force
State Fully Defined
Scope
Scoping Method Remote Point
Remote Points Remote Point
Coordinate System Global Coordinate System
X Coordinate 500. mm
Y Coordinate 0. mm
Z Coordinate 0. mm
Location Defined
Definition
Type Remote Force
Define By Components
X Component Tabular Data
Y Component Tabular Data
Z Component 0. N
X Phase Angle 0. °
Y Phase Angle 0. °
Z Phase Angle 0. °
Suppressed No
Behavior Deformable
Advanced
Pinball Region All

FIGURE 7
Model (A4, B4, C4) > Harmonic Response (C5) > Remote Force
TABLE 53
Model (A4, B4, C4) > Harmonic Response (C5) > Remote Force
Frequency X Component Y Component Z Component X Phase Y Phase Z Phase
[Hz] [N] [N] [N] Angle [°] Angle [°] Angle [°]
0. 0. = 0. 0. 0. 0.
0.
1. -1. 0.
= 0. = 0. = 0.
2. 0. -1. = 0.

FIGURE 8
Model (A4, B4, C4) > Harmonic Response (C5) > Remote Force > Figure

Solution (C6)
TABLE 54
Model (A4, B4, C4) > Harmonic Response (C5) > Solution
Solution
Object Name
(C6)
State Solved
Information
Status Done
MAPDL Elapsed Time 14 m 55 s
MAPDL Memory Used 1.332 GB
MAPDL Result File
5.7939 GB
Size
Post Processing
Beam Section Results No

FIGURE 9
Model (A4, B4, C4) > Harmonic Response (C5) > Solution (C6)

TABLE 55
Model (A4, B4, C4) > Harmonic Response (C5) > Solution (C6) > Solution Information
Solution
Object Name
Information
State Solved
Solution Information
Solution Output Solver Output
Newton-Raphson Residuals 0
Identify Element Violations 0
Update Interval 2.5 s
Display Points All
FE Connection Visibility
Activate Visibility Yes
Display All FE Connectors
Draw Connections Attached To All Nodes
Line Color Connection Type
Visible on Results No
Line Thickness Single
Display Type Lines

TABLE 56
Model (A4, B4, C4) > Harmonic Response (C5) > Solution (C6) > Result Charts
Frequency Frequency Response Frequency Response
Object Name
Response 2 4
State Solved
Scope
Scoping Method Geometry Selection
Geometry 14 Bodies
Spatial Resolution Use Maximum
Definition
Type Directional Deformation
Orientation X Axis Y Axis Z Axis
Coordinate System Global Coordinate System
Suppressed No
Options
Frequency Range Use Parent
Minimum Frequency 2000. Hz
Maximum Frequency 1.75e+005 Hz
Display Bode
Chart Viewing Style Log Y
Results
Maximum Amplitude 6.6514e-005 mm 6.2269e-005 mm 3.3027e-005 mm
Frequency 7190. Hz 8920. Hz
Phase Angle 180. °
Real -6.6514e-005 mm -6.2269e-005 mm -3.3027e-005 mm
Imaginary 0. mm

FIGURE 10
Model (A4, B4, C4) > Harmonic Response (C5) > Solution (C6) > Frequency Response

FIGURE 11
Model (A4, B4, C4) > Harmonic Response (C5) > Solution (C6) > Frequency Response 2
FIGURE 12
Model (A4, B4, C4) > Harmonic Response (C5) > Solution (C6) > Frequency Response 4

Solution Combination
Model (A4, B4, C4) > Solution Combination
Environment
Coefficient Time
Name
1 1
Static Structural
0 2

TABLE 57
Model (A4, B4, C4) > Solution Combination > Results
Total
Object Name Equivalent Stress
Deformation
State Solved
Scope
Scoping Method Geometry Selection
Geometry All Bodies
Definition
Total
Type Equivalent (von-Mises) Stress
Deformation
By Combination
Combination Number Last
Suppressed No
Results
Minimum 0. mm 5.4067e-002 MPa
Maximum 0.11164 mm 1384.4 MPa
Average 1.8806e-002 mm 53.683 MPa
Minimum Occurs On MainBody1 MainBody111
Maximum Occurs On Sleeve11 Inner body111
Integration Point Results
Display Option Averaged
Average Across Bodies No
Material Data
Structural Steel
TABLE 58
Structural Steel > Constants
Density 7.85e-006 kg mm^-3
Coefficient of Thermal Expansion 1.2e-005 C^-1
Specific Heat 4.34e+005 mJ kg^-1 C^-1
Thermal Conductivity 6.05e-002 W mm^-1 C^-1
Resistivity 1.7e-004 ohm mm

TABLE 59
Structural Steel > Color
Gree
Red Blue
n
132 139 179

TABLE 60
Structural Steel > Compressive Ultimate Strength
Compressive Ultimate Strength MPa
0

TABLE 61
Structural Steel > Compressive Yield Strength
Compressive Yield Strength MPa
250

TABLE 62
Structural Steel > Tensile Yield Strength
Tensile Yield Strength MPa
250

TABLE 63
Structural Steel > Tensile Ultimate Strength
Tensile Ultimate Strength MPa
460

TABLE 64
Structural Steel > Isotropic Secant Coefficient of Thermal Expansion
Zero-Thermal-Strain Reference Temperature C
22

TABLE 65
Structural Steel > S-N Curve
Alternating Stress MPa Cycles Mean Stress MPa
3999 10 0
2827 20 0
1896 50 0
1413 100 0
1069 200 0
441 2000 0
262 10000 0
214 20000 0
138 1.e+005 0
114 2.e+005 0
86.2 1.e+006 0

TABLE 66
Structural Steel > Strain-Life Parameters
Strength Strength Ductility Ductility Cyclic Strength Cyclic Strain
Coefficient MPa Exponent Coefficient Exponent Coefficient MPa Hardening Exponent
920 -0.106 0.213 -0.47 1000 0.2

TABLE 67
Structural Steel > Isotropic Elasticity
Young's Modulus MPa Poisson's Ratio Bulk Modulus MPa Shear Modulus MPa Temperature C
2.e+005 0.3 1.6667e+005 76923

TABLE 68
Structural Steel > Isotropic Relative Permeability
Relative Permeability
10000

Gray Cast Iron


TABLE 69
Gray Cast Iron > Constants
Density 7.2e-006 kg mm^-3
Coefficient of Thermal Expansion 1.1e-005 C^-1
Specific Heat 4.47e+005 mJ kg^-1 C^-1
Thermal Conductivity 5.2e-002 W mm^-1 C^-1
Resistivity 9.6e-005 ohm mm

TABLE 70
Gray Cast Iron > Color
Gree
Red Blue
n
161 161 161

TABLE 71
Gray Cast Iron > Compressive Ultimate Strength
Compressive Ultimate Strength MPa
820
TABLE 72
Gray Cast Iron > Compressive Yield Strength
Compressive Yield Strength MPa
0

TABLE 73
Gray Cast Iron > Tensile Yield Strength
Tensile Yield Strength MPa
0

TABLE 74
Gray Cast Iron > Tensile Ultimate Strength
Tensile Ultimate Strength MPa
240

TABLE 75
Gray Cast Iron > Isotropic Secant Coefficient of Thermal Expansion
Zero-Thermal-Strain Reference Temperature C
22

TABLE 76
Gray Cast Iron > Isotropic Elasticity
Young's Modulus MPa Poisson's Ratio Bulk Modulus MPa Shear Modulus MPa Temperature C
1.1e+005 0.28 83333 42969

TABLE 77
Gray Cast Iron > Isotropic Relative Permeability
Relative Permeability
10000

You might also like