Scribd
Upload
47 views2 pages

E - Series King Pearl Expandable Polystyrene

The King Pearl® Expandable Polystyrene E series is composed of 93-96% polystyrene and 4-7% pentane, offering high strength and environmental friendliness without harmful additives. It meets EU REACH and ROHS standards and has various specifications for different applications, including molding properties and physical characteristics. The document provides detailed information on aging time, molding conditions, and physical properties such as density, strength, and water absorption.

Uploaded by

Luis Alberto Galvan Guillermo
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
47 views2 pages

E - Series King Pearl Expandable Polystyrene

The King Pearl® Expandable Polystyrene E series is composed of 93-96% polystyrene and 4-7% pentane, offering high strength and environmental friendliness without harmful additives. It meets EU REACH and ROHS standards and has various specifications for different applications, including molding properties and physical characteristics. The document provides detailed information on aging time, molding conditions, and physical properties such as density, strength, and water absorption.

Uploaded by

Luis Alberto Galvan Guillermo
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

King Pearl® Expandable Polystyrene

E series Technical Data Sheet (TDS)


1. Composition of E series
Expandable Polystyrene (EPS) is suspension polymerized from styrene monomer, further more
dipped with blowing agent, molecular formula: (C8H8) n,
Content of Polystyrene: (CAS NO 9003-53-6) 93 - 96%
Content of Pentane: (CAS NO 109-66-0) 4 - 7%
2. Characteristics of E series
E series is a standard grade with wide application, high strength, pretty surface, and environmental
friendly; no added of additives included such as toluene, dimethlybenzene, ethylbenzene, and does
not contain prohibited substances; it also meet standards of EU REACH and ROHS.
Specification and Application:
Properties Unit E- MS E- SA E- SB E- S

Average Granule mm 1.2 - 1.8 0.9 - 1.4 0.7 - 1.1 0.5 - 0.9

Pentane Content % ≧ 4.0 ≧ 4.0 ≧ 4.0 ≧ 4.0


Moisture Content % ≦ 1.0 ≦ 1.0 ≦ 1.0 ≦ 1.0
Residual Monomer % ≦ 0.5 ≦ 0.5 ≦ 0.5 ≦ 0.5
Sieve Analysis Efficiency % ≧ 90 ≧ 90 ≧ 90 ≧ 90
Expandability - 70 - 85 60 - 70 50 - 65 33 - 50

*The density available depends on the type and equipment of pre expansion
3. Aging Time:
(Aging time will be different due to different density, different temperature, and different humidity.)
If the aging time is too long, it is hard to get a good confusion during molding and when pentane
content is less than 4%. If aging time is too short, it will result a longer cooling time, bad for the
improvement of production efficiency. Thus, aging time shall be adjusted according to the expansion
density required and aging temperature.
4. Molding Property (different machines vary processing conditions)
following is the molding processing conditions for reference
Grade Unit E- MS E- SA E- SB E- S
Molding Density g/L 14.3 15.0 16.6 20
Final Product - Box
Measurement m/m 490*320*170
Major Steam Pressure bar 4.0~7.0 4.0~7.0 4.0~7.0 4.0~7.0
Steam pressure used after
bar 2.5~4.0 2.5~4.0 2.5~4.0 2.5~4.0
decompression
Cross heating of fixed side bar 0.5~1.0 0.5~1.0 0.5~1.0 0.5~1.0
Crossing heating of moving
bar 0.5~1.0 0.5~1.0 0.5~1.0 0.5~1.0
side
Bilateral Heating bar 0.5~1.0 0.5~1.0 0.5~1.0 0.5~1.0
Water Cooling sec ≤5 ≤5 ≤5 ≤5
Vacuum Cooling sec 30~50 30~50 20~40 20~30
Cycle Time sec ≤120 ≤120 ≤100 ≤90
Block Machine Brand & Type - KURTZ K1214

5. Physical Properties
Property Test Method Unit E-MS E-SA E-SB E-S
Apparent Density GB/T6343-2009 Kg/M³ 13~18 13~20 13~30 15~50
Compression strength
GB/T8813-2008 KPa 80~210 80~260 70~300 80~500
(deformation 10%)
Bending strength GB/T8812-2007 KPa 80~250 80~300 80~350 80~700
Tensile strength GB/T9641-88 KPa 80~250 80~300 80~400 80~750
Thermal deformation ℃ 85~100
Coefficient of thermal
expansion
℃ (5~7)*10

Dimensional stability
≦0.35 ≦0.35 ≦0.35 ≦0.5
(70±2 ℃, 48hr) GB/T8811-2008 %

Thermal conductivity
≦0.036 ≦0.036 ≦0.035 ≦0.035
coefficient ( ≦ ) (20℃) GB/T10294-2008 W/M.K

Water vapor permeability QB/T2411-2008 ng/Pa.m.s ≦5.0 ≦5.0 ≦5.0 ≦5.0


Water absorption (≦) 3 day GB/T8810-2005 % ≦1.0 ≦1.0 ≦1.0 ≦1.5
Water absorption (≦) 7 day GB/T8810-2005 % ≦1.1 ≦1.1 ≦1.1 ≦1.8
Water absorption (≦) 28 day GB/T8810-2005 % ≦2.3 ≦2.3 ≦2.3 ≦2.0

Above information is based on our current knowledge, for other issues which are not mentioned
herein, welcome to discuss with us and improve.

(For any test reports, please email us at [email protected])


(For more information, please check our website: www.loyalgroup.com or speak to our
sales representatives)

*The copyright of above data belongs to Loyal Group, 2017*

You might also like