6313129 - BISON RUBBER SEAL POT 750 ML RO / PL / EN

RUBBER SEAL
RUBBER-BASED COATING FOR WATERTIGHT SEALING, PROTECTING AND
REPAIRING
· Waterbased, solvent-free, VOC-free, non-toxic

CERTIFICATES & STANDARDS

Certificates
Products and systems for the protection
and repair of concrete structures. Surface
protection systems for concrete. (EN 1504-2)

Liquid-applied water impermeable products

for use beneath ceramic tiling bonded with
adhesives. (EN 14891)

Polymer modified bituminous thick coatings for

waterproofing. (EN 15814)

Products and systems for the protection

and repair of concrete structures. Surface
protection systems for concrete (EN 1504-2).

PRODUCT DESCRIPTION Liquid-applied water impermeable products

Rubber-based coating for watertight sealing, protecting and for use beneath ceramic tiling bonded with
repairing. Superior universal quality, suitable for virtually all adhesives (EN 14891).
surfaces. Suitable internally and externally, from waterproofing
bathrooms to gutter repair, from protecting garden wood to
waterproofing connections. Use Rubber Seal Textile Tape in
combination with Rubber Seal to bridge tears, cracks and Standards
seams, and to facilitate layer thickness build-up. Windows and doors - Air permeability:
FIELD OF APPLICATION completely airtight.
Suitable for sealing, protecting and repairing virtually all Windows and doors – Watertightness:
materials, such as wood, concrete, stone, metal, zinc, bitumen, completely watertight.
EPDM (test first), PVC, etc. Even good adhesion to PP/
PE. Suitable for indoor and outdoor applications, such as Thermal performance of buildings - Air
bathrooms, roofs, cellars, walls and gardens. For waterproofing permeability of building components and
shower basins, floor seams, gutters, pipe conduits, window building elements: completely airtight
frame and skylight joints, ground level items, etc. Also suitable Flexible sheets for waterproofing.
as anti-slip underlayer, metal and wood protection (for example, Bitumen, plastic and rubber sheets for roof
garden poles) and coating. waterproofing. Method of artificial ageing by
long term exposure to the combination of UV
PROPERTIES
radiation, elevated temperature and water.
· For sealing, protecting and repairing
· 100 % waterproof Watertight covering kits for wet room floors
· Permanently elastic 750 % and or walls.
· Easy to apply (by brush) (Leadership in Energy and Environmental
· Bonds to almost all materials. Design): IEQ CREDIT 4.2: Low-emitting
· Protection against corrosion and erosion materials paints and coatings. Product type:
· All-weather and UV resistant waterproofing sealers.
· Salt and chemical resistant
· Paintable (test first)
· Durable quality: durability of minimum 20 years (tested
conform EN 1297)

Our advice is based on extensive research and practical experience. However, in view of the large variety of materials and the conditions under which our products
are applied, we assume no responsibility for the results obtained and/or any damage caused by the use of the product. Nevertheless, our Service Department is
always at your disposal for any advice needed.
Bison International B.V. - P.O. Box 160 - NL 4460 AD Goes www.bison.net 1
20241202
6313129 - BISON RUBBER SEAL POT 750 ML RO / PL / EN

RUBBER SEAL
RUBBER-BASED COATING FOR WATERTIGHT SEALING, PROTECTING AND
REPAIRING
PREPARATION STORAGE CONDITIONS
Working Conditions: Do not apply at temperatures below +5 °C. Properly sealed packages should be stored in a dry, cool,
May be exposed to (rain)water after 12 hours. frostproof location at temperatures between +5 °C and +25 °C.
Preliminary Surface Treatment: Surfaces must be dry, clean and Shelf life: At least 18 months in unopened package. Opened
free of dust and grease. Sand them if necessary. packaging reduces the shelf life.
Tools: Brush, roller or squeegee.

APPLICATION
Coverage: Usage: 1.5-2.5 L/m2.
Directions for use:
Before use, stir well manually until a homogeneous colour is
obtained. Surfaces must be dry, clean and free of dust and
grease. Sand them if necessary. Apply using a brush, roller or
rubber squeegee (min. 2 layers), with a waiting time of approx.
10 min. between the layers. Tip: use BISON Rubber Seal Textile
Tape in combination with BISON Rubber Seal to bridge tears,
cracks and seams, and to facilitate layer thickness build-up.
Apply Rubber Seal Textile Tape immediately after applying the
first layer, press well and immediately cover with the second
layer. Rubber Seal is dust-free dry after approx. 3 hours, may
be charged with (rain) water after 12 hours and is fully cured
after 48 hours, depending on the amount applied and ambient
circumstances. Minimum layer thickness: 2 mm. Usage: 1.5-2.5
L/m2
Stains/residue: Immediately remove wet residue with water.
Dried residue can only be removed mechanically.
Advice: Minimum layer thickness: 2 mm.
Points of attention: Do not apply at temperatures below +5 °C.
May be charged with (rain) water after 12 hours. If a joint
sealant is used in combination with Rubber Seal®, we strongly
recommend to use a neutral silicone sealant, for example a
Silicone Sealant Construction, to prevent discoloration of the
sealant.

TECHNICAL SPECIFICATIONS
Chemical base: Modified Bitumen
Chemicals resistance: Very good
Colour: Black
Drying/Curing time 48 hours
approx.*:
Elasticity: Very good
Maximum application 160 °C
temperature:
Minimum temperature -20 °C
resistance:
Moisture resistance: Very good
Solid matter approx.: 60 %
UV resistance: Very good
Viscosity: Thick liquid

* Curing time may vary depending on a.o. surface, product

quantity used, humidity level and ambient temperature.

Our advice is based on extensive research and practical experience. However, in view of the large variety of materials and the conditions under which our products
are applied, we assume no responsibility for the results obtained and/or any damage caused by the use of the product. Nevertheless, our Service Department is
always at your disposal for any advice needed.
Bison International B.V. - P.O. Box 160 - NL 4460 AD Goes www.bison.net 2
20241202