ASTM Volume 01.

04, January 2017

A1-00(2010) Standard Specification for Carbon Steel Tee Rails

A2-02(2014) Standard Specification for Carbon Steel Girder Rails of Plain, Grooved, and Guard Types

A3-01(2012) Standard Specification for Steel Joint Bars, Low, Medium, and High Carbon (Non-Heat-Treated)

A6/A6M-16a Standard Specification for General Requirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet Piling

A20/A20M-15 Standard Specification for General Requirements for Steel Plates for Pressure Vessels

A36/A36M-14 Standard Specification for Carbon Structural Steel

A49-12 Standard Specification for Heat-Treated Carbon Steel Joint Bars, Microalloyed Joint Bars, and Forged Carbon Steel Compromise Joint Bars

A65-07(2013) Standard Specification for Steel Track Spikes

A66-07(2013) Standard Specification for Steel Screw Spikes

A67-00(2016) Standard Specification for Steel Tie Plates, Low-Carbon and High-Carbon-Hot-Worked

A131/A131M-14 Standard Specification for Structural Steel for Ships

A183-14 Standard Specification for Carbon Steel Track Bolts and Nuts

A184/A184M-06(2011) Standard Specification for Welded Deformed Steel Bar Mats for Concrete Reinforcement

A203/A203M-12 Standard Specification for Pressure Vessel Plates, Alloy Steel, Nickel

A204/A204M-12 Standard Specification for Pressure Vessel Plates, Alloy Steel, Molybdenum

A225/A225M-12 Standard Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Vanadium-Nickel

A242/A242M-13 Standard Specification for High-Strength Low-Alloy Structural Steel

A263-12 Standard Specification for Stainless Chromium Steel-Clad Plate

A264-12 Standard Specification for Stainless Chromium-Nickel Steel-Clad Plate

A265-12 Standard Specification for Nickel and Nickel-Base Alloy-Clad Steel Plate

A283/A283M-13 Standard Specification for Low and Intermediate Tensile Strength Carbon Steel Plates

A285/A285M-12 Standard Specification for Pressure Vessel Plates, Carbon Steel, Low- and Intermediate-Tensile Strength

A299/A299M-09(2014) Standard Specification for Pressure Vessel Plates, Carbon Steel, Manganese-Silicon

A302/A302M-12 Standard Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Molybdenum and Manganese-Molybdenum-Nickel

A328/A328M-13a Standard Specification for Steel Sheet Piling

A353/A353M-09(2014) Standard Specification for Pressure Vessel Plates, Alloy Steel, Double-Normalized and Tempered 9% Nickel

A370-16 Standard Test Methods and Definitions for Mechanical Testing of Steel Products

A387/A387M-11 Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum

A416/A416M-16 Standard Specification for Low-Relaxation, Seven-Wire Steel Strand for Prestressed Concrete

A421/A421M-15 Standard Specification for Stress-Relieved Steel Wire for Prestressed Concrete

A435/A435M-90(2012) Standard Specification for Straight-Beam Ultrasonic Examination of Steel Plates

A455/A455M-12a Standard Specification for Pressure Vessel Plates, Carbon Steel, High-Strength Manganese

A514/A514M-14 Standard Specification for High-Yield-Strength, Quenched and Tempered Alloy Steel Plate, Suitable for Welding

A515/A515M-10(2015) Standard Specification for Pressure Vessel Plates, Carbon Steel, for Intermediate- and Higher-Temperature Service

A516/A516M-10(2015) Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate- and Lower-Temperature Service

A517/A517M-10(2015) Standard Specification for Pressure Vessel Plates, Alloy Steel, High-Strength, Quenched and Tempered

A529/A529M-14 Standard Specification for High-Strength Carbon-Manganese Steel of Structural Quality

A537/A537M-13 Standard Specification for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel

A542/A542M-13 Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched-and-Tempered, Chromium-Molybdenum, and Chromium-
Molybdenum-Vanadium

A543/A543M-09(2014) Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered Nickel-Chromium-Molybdenum

A553/A553M-14 Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered 7, 8, and 9 % Nickel

A562/A562M-10(2015) Standard Specification for Pressure Vessel Plates, Carbon Steel, Manganese-Titanium for Glass or Diffused Metallic Coatings

A572/A572M-15 Standard Specification for High-Strength Low-Alloy Columbium-Vanadium Structural Steel

A573/A573M-13 Standard Specification for Structural Carbon Steel Plates of Improved Toughness

A577/A577M-90(2012) Standard Specification for Ultrasonic Angle-Beam Examination of Steel Plates

A578/A578M-07(2012) Standard Specification for Straight-Beam Ultrasonic Examination of Rolled Steel Plates for Special Applications

A588/A588M-15 Standard Specification for High-Strength Low-Alloy Structural Steel, up to 50 ksi [345 MPa] Minimum Yield Point, with Atmospheric
Corrosion Resistance

A612/A612M-12 Standard Specification for Pressure Vessel Plates, Carbon Steel, High Strength, for Moderate and Lower Temperature Service

A615/A615M-16 Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement

A633/A633M-13 Standard Specification for Normalized High-Strength Low-Alloy Structural Steel Plates

A645/A645M-10(2016) Standard Specification for Pressure Vessel Plates, 5 % and 51 2 % Nickel Alloy Steels, Specially Heat Treated

A648-12 Standard Specification for Steel Wire, Hard-Drawn for Prestressed Concrete Pipe

A656/A656M-13 Standard Specification for Hot-Rolled Structural Steel, High-Strength Low-Alloy Plate with Improved Formability

A662/A662M-12 Standard Specification for Pressure Vessel Plates, Carbon-Manganese-Silicon Steel, for Moderate and Lower Temperature Service

A673/A673M-07(2012) Standard Specification for Sampling Procedure for Impact Testing of Structural Steel

A690/A690M-13a Standard Specification for High-Strength Low-Alloy Nickel, Copper, Phosphorus Steel H-Piles and Sheet Piling with Atmospheric
Corrosion Resistance for Use in Marine Environments

A704/A704M-06(2011) Standard Specification for Welded Steel Plain Bar or Rod Mats for Concrete Reinforcement

A706/A706M-16 Standard Specification for Deformed and Plain Low-Alloy Steel Bars for Concrete Reinforcement

A709/A709M-16a Standard Specification for Structural Steel for Bridges

A710/A710M-02(2013) Standard Specification for Precipitation–Strengthened Low-Carbon Nickel-Copper-Chromium-Molybdenum-Columbium Alloy

A722/A722M-15 Standard Specification for High-Strength Steel Bars for Prestressed Concrete

A724/A724M-09(2013) Standard Specification for Pressure Vessel Plates, Carbon-Manganese-Silicon Steel, Quenched and Tempered, for Welded Pressure
Vessels

A734/A734M-12 Standard Specification for Pressure Vessel Plates, Alloy Steel and High-Strength Low-Alloy Steel, Quenched-and-Tempered

A735/A735M-12 Standard Specification for Pressure Vessel Plates, Low-Carbon Manganese-Molybdenum-Columbium Alloy Steel, for Moderate and Lower
Temperature Service

A736/A736M-12 Standard Specification for Pressure Vessel Plates, Low-Carbon Age-Hardening Nickel-Copper-Chromium-Molybdenum-Columbium Alloy
Steel

A737/A737M-09(2013) Standard Specification for Pressure Vessel Plates, High-Strength, Low-Alloy Steel

A738/A738M-12a Standard Specification for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel, for Moderate and Lower Temperature
Service

A751-14a Standard Test Methods, Practices, and Terminology for Chemical Analysis of Steel Products

A759-10(2016) Standard Specification for Carbon Steel Crane Rails

A767/A767M-16 Standard Specification for Zinc-Coated (Galvanized) Steel Bars for Concrete Reinforcement

A769/A769M-05(2010) Standard Specification for Carbon and High-Strength Electric Resistance Forge-Welded Steel Structural Shapes

A770/A770M-03(2012)e1 Standard Specification for Through-Thickness Tension Testing of Steel Plates for Special Applications
A775/A775M-16 Standard Specification for Epoxy-Coated Steel Reinforcing Bars

A779/A779M-16 Standard Specification for Steel Strand, Seven-Wire, Uncoated, Compacted for Prestressed Concrete

A786/A786M-15 Standard Specification for Hot-Rolled Carbon, Low-Alloy, High-Strength Low-Alloy, and Alloy Steel Floor Plates

A820/A820M-16 Standard Specification for Steel Fibers for Fiber-Reinforced Concrete

A821/A821M-15 Standard Specification for Steel Wire, Hard-Drawn for Prestressed Concrete Tanks

A827/A827M-14 Standard Specification for Plates, Carbon Steel, for Forging and Similar Applications

A829/A829M-14 Standard Specification for Alloy Structural Steel Plates

A830/A830M-14 Standard Specification for Plates, Carbon Steel, Structural Quality, Furnished to Chemical Composition Requirements

A832/A832M-10(2015)e1 Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum-Vanadium

A841/A841M-13 Standard Specification for Steel Plates for Pressure Vessels, Produced by Thermo-Mechanical Control Process (TMCP)

A844/A844M-09(2015) Standard Specification for Steel Plates, 9 % Nickel Alloy, for Pressure Vessels, Produced by the Direct-Quenching Process

A857/A857M-07(2013) Standard Specification for Steel Sheet Piling, Cold Formed, Light Gage

A871/A871M-14 Standard Specification for High-Strength Low-Alloy Structural Steel Plate With Atmospheric Corrosion Resistance

A881/A881M-16 Standard Specification for Steel Wire, Indented, Low-Relaxation for Prestressed Concrete

A882/A882M-04a(2010) Standard Specification for Filled Epoxy-Coated Seven-Wire Prestressing Steel Strand

A884/A884M-14 Standard Specification for Epoxy-Coated Steel Wire and Welded Wire Reinforcement

A886/A886M-12 Standard Specification for Steel Strand, Indented, Seven-Wire Stress-Relieved for Prestressed Concrete

A898/A898M-07(2012) Standard Specification for Straight Beam Ultrasonic Examination of Rolled Steel Structural Shapes

A910/A910M-12 Standard Specification for Uncoated, Weldless, 2-Wire and 3-Wire Steel Strand for Prestressed Concrete

A911/A911M-15 Standard Specification for Low-Relaxation Steel Bars for Prestressed Concrete Railroad Ties

A913/A913M-15 Standard Specification for High-Strength Low-Alloy Steel Shapes of Structural Quality, Produced by Quenching and Self-Tempering Process
(QST)

A934/A934M-16 Standard Specification for Epoxy-Coated Prefabricated Steel Reinforcing Bars

A941-15 Standard Terminology Relating to Steel, Stainless Steel, Related Alloys, and Ferroalloys

A944-10(2015) Standard Test Method for Comparing Bond Strength of Steel Reinforcing Bars to Concrete Using Beam-End Specimens

A945/A945M-16 Standard Specification for High-Strength Low-Alloy Structural Steel Plate with Low Carbon and Restricted Sulfur for Improved Weldability,
Formability, and Toughness

A950/A950M-11(2015) Standard Specification for Fusion-Bonded Epoxy-Coated Structural Steel H-Piles and Sheet Piling

A951/A951M-16 Standard Specification for Steel Wire for Masonry Joint Reinforcement

A955/A955M-16a Standard Specification for Deformed and Plain Stainless-Steel Bars for Concrete Reinforcement

A970/A970M-16 Standard Specification for Headed Steel Bars for Concrete Reinforcement

A981/A981M-11(2016) Standard Test Method for Evaluating Bond Strength for 0.600-in. [15.24-mm] Diameter Steel Prestressing Strand, Grade 270 [1860],
Uncoated, Used in Prestressed Ground Anchors

A992/A992M-11(2015) Standard Specification for Structural Steel Shapes

A996/A996M-16 Standard Specification for Rail-Steel and Axle-Steel Deformed Bars for Concrete Reinforcement

A1017/A1017M-11(2015) Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum-Tungsten

A1022/A1022M-16b Standard Specification for Deformed and Plain Stainless Steel Wire and Welded Wire for Concrete Reinforcement

A1032-15 Standard Test Method for Hydrogen Embrittlement Resistance for Steel Wire Hard-Drawn Used for Prestressed Concrete Pipe

A1034/A1034M-10a(2015) Standard Test Methods for Testing Mechanical Splices for Steel Reinforcing Bars

A1035/A1035M-16b Standard Specification for Deformed and Plain, Low-Carbon, Chromium, Steel Bars for Concrete Reinforcement

A1043/A1043M-14 Standard Specification for Structural Steel with Low Yield to Tensile Ratio for Use in Buildings

A1044/A1044M-16a Standard Specification for Steel Stud Assemblies for Shear Reinforcement of Concrete

A1055/A1055M-10e1 Standard Specification for Zinc and Epoxy Dual-Coated Steel Reinforcing Bars
 A1058-14 Standard Test Methods for Mechanical Testing of Steel Products—Metric

A1060/A1060M-16b Standard Specification for Zinc-Coated (Galvanized) Steel Welded Wire Reinforcement, Plain and Deformed, for Concrete

A1061/A1061M-16 Standard Test Methods for Testing Multi-Wire Steel Prestressing Strand

A1064/A1064M-16b Standard Specification for Carbon-Steel Wire and Welded Wire Reinforcement, Plain and Deformed, for Concrete

A1066/A1066M-11(2015)e1 Standard Specification for High-Strength Low-Alloy Structural Steel Plate Produced by Thermo-Mechanical Controlled Process
(TMCP)

A1077/A1077M-14 Standard Specification for Structural Steel with Improved Yield Strength at High Temperature for Use in Buildings

A1078/A1078M-12e1 Standard Specification for Epoxy-Coated Steel Dowels for Concrete Pavement

A1081/A1081M-15 Standard Test Method for Evaluating Bond of Seven-Wire Steel Prestressing Strand

A1094/A1094M-16 Standard Specification for Continuous Hot-Dip Galvanized Steel Bars for Concrete Reinforcement

A1096/A1096M-15 Standard Test Method for Evaluating Bond of Individual Steel Wire, Indented or Plain, for Concrete Reinforcement

D3963/D3963M-15 Standard Specification for Fabrication and Jobsite Handling of Epoxy-Coated Steel Reinforcing Bars

More Information

ORDERING OPTIONS

Print or NOW get Online Access to this Volume

View Contents

- 2017
Standards: 125
Pages: 848

- 2016
Standards: 125
Pages: 868

All

Search topic, title, author, A53

GO

Home Contact

About ASTM Policies

Site Map Cookies

Support Copyright/Permissions

Reading Room

Copyright © 1996 - 2017 ASTM. All Rights Reserved. ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA, 19428-2959 USA