I.

Professional core courses by-aicte

1 Mathematics for Civil Engineering
2 Engineering Mechanics and Solid Mechanics
2 Civil Engineering Materials, Testing & Evaluation
3 Building Planning and Computer-aided Civil Engineering Drawing
4 Concrete Technology
5 Fluid Mechanics
6 Transportation Engineering
7 Surveying and Geomatics
8 Geotechnical Engineering
9 Hydraulic Engineering
10 Structural Analysis
11 Construction Engineering & Management
12 Structural Design-I
13 Environmental Engineering
14 Engineering Economics, Estimation & Costing
15 Hydrology & Water Resources Engineering
16 Structural Design -II
17 Intelligent Transportation Systems
18 Sustainable and Green Construction
19 Robotics and Automation in Civil Engineering

II. Professional elective courses

A Structural Engineering
1. Structural Analysis-I &II
2. Advanced Structural Analysis
3. Structural Analysis by Matrix Methods
4. Structural Mechanics
5. Reliability Analysis of Structures
6. Engineering Risk & Uncertainty
7. Decision and Risk Analysis
8. Introduction to Finite Element analysis
9. Engineering Materials for Sustainability
10. Metal Structure Behavior- I &II
11. Masonry Structures
12. Reinforced Concrete
13. Advanced Concrete Technolog
14. Design of Concrete Structures-I &II
15. Prestressed Concrete
16. Design of Steel Structures
17. Bridge Engineering, I & II
18. Industrial Structures
19. Design of Structural Systems
20. Structural Dynamics
 21. Earthquake Engineering
22. Rehabilitation/Restoration of structures

B Construction Engineering & Management

1. Construction Productivity
2. Building Construction Practice
3. Formwork Engineering
4. Construction Cost Analysis
5. Sustainable Construction Methods
6. Construction Engineering Materials.
7. Contracts Management
8. Construction Equipment& Automation
9. Digitalized construction Lab
10. Construction Project Planning Systems.
11. Advanced Construction Techniques
12. Energy Efficient Buildings

C Geotechnical Engineering
1. Soil Mechanics-I & II
2. Foundation Engineering
3. Geotechnical Design
4. Structural Geology
5. Offshore Engineering
6. Rock Mechanics
7. Environmental Geo-technology
8. Ground Improvement Techniques
9. Soil Dynamics and Machine Foundation
10. Earth Retaining Structures
11. Tunnelling Engineering

D Geo Informatics
1. Total station and GPS surveying
2. Remote sensing
3. Satellite Image Processing
4. Cartography and GIS
5. Photogrammetry
6. Airborne and Terrestrial laser mapping
7. Hydrographic surveying

E Transportation Engineering
1. Pavement Materials
2. Pavement Design
3. Public Transportation Systems
4. Traffic Engineering and Management
5. Urban Transportation Planning.
6. Geometric Design of Highways
7. Airport Planning and Design
8. Railway Engineering
 9. Intelligent Transportation Systems
10. Highway Construction and Management
11. Port and Harbor Engineering
12. High Speed Rail Engineering
13. Transportation Economics
14. Infrastructure Planning and Design
15. Smart Cities

F Environment Engineering
1. Environmental Systems
2. Transport of Water and Wastewater
3. Environmental Laws and Policy
4. Physico-Chemical Processes for Water and Wastewater Treatment
5. Biological Processes for Contaminant Removal
6. Rural Water Supply and Onsite Sanitation Systems
7. Water and Air Quality Modelling
8. Solid and Hazardous Waste Management
9. Air and Noise Pollution Control Engineering
10. Environmental Impact Assessment and Life Cycle Analyses
11. Sustainable Engineering & Technology.
12. Climate change adaptation and Mitigation Participatory
13. Industrial Waste water Management
14. Environment Health and Safety
15. Ecological Engineering

G Hydrology & Water Resources Engineering

1.Water Quality and Management
2.Surface Hydrology
3.Environmental Fluid Mechanics
4.Water Resources Field Methods
5.Water Resource Management
6.Groundwater Engineering
7.Watershed Conservation and Management
8.Urban water Infrastructure
9. Integrated water resource management

H Environment Engineering
1. Environmental Systems
2. Transport of Water and Wastewater
3. Environmental Laws and Policy
4. Physico-Chemical Processes for Water and Wastewater Treatment
5. Biological Processes for Contaminant Removal
6. Rural Water Supply and Onsite Sanitation Systems
7. Water and Air Quality Modelling
8. Solid and Hazardous Waste Management
9. Air and Noise Pollution Control Engineering
10. Environmental Impact Assessment and Life Cycle Analyses
11. Sustainable Engineering & Technology.
 12. Climate change adaptation and Mitigation Participatory
13. Industrial Waste water Management
14. Environment Health and Safety
15. Ecological Engineering

I Hydrology & Water Resources Engineering

1.Water Quality and Management
2.Surface Hydrology
3.Environmental Fluid Mechanics
4.Water Resources Field Methods
5.Water Resource Management
6.Groundwater Engineering
7.Watershed Conservation and Management
8.Urban water Infrastructure
9. Integrated water resource management

J Hydraulics
1. Design of hydraulic structures/Irrigation Engineering
2. Pipeline Engineering
3. Open Channel flow
4. River Engineering
5. Hydraulic modelling
6. Basics of computational hydraulics
7. Transients in closed conduits
8. Urban Hydrology and Hydraulics
9. Groundwater

K Ocean Engineering
1.Ocean Wave Dynamics
2.Marine Geotechnical Engineering
3.Coastal Engineering
4.Off Shore structures
5.Port Harbor Engineering
6.Coastal Hazards and Mitigation
7.Coastal Zone Management and Remote Sensing
L Diversified Course
1. Steel Concrete Composite structures
2. Finance for Engineering
3. Earth and Rockfill Dams
4. Computational Fluid Dynamics
5. Rainwater harvesting
6. Transport and environment
7. Environment Quality Monitoring.
8. Evaluating Accessibility / Universal Design in Built Environments
III. Laboratory courses by-nits

Surveying & Geomatics Laboratory

1) Chain survey by perpendiculars offsets.
2) Chain survey by oblique offsets.
3) Open and closed traverse survey with chain prismatic compass.
4) Plane table survey by methods of radiation, intersection, resection.
5) Profile leveling with dumpy level, cross sections, reciprocal leveling,
contouring.
6) Surveying with Theodolite – vertical and horizontal angles.
7) Measuring distances and angles using total station.

Civil Engineering Materials, Testing and Evaluation Laboratory

Tests on steel
1) Tensile and Elongation
2) Proof Stress
3) Bend-rebend test
4) Nominal mass
Tests on Cement
1) Normal Consistency
2) Fineness
3) Initial and Final setting time
4) Specific Gravity
5) Soundness
6) Compressive Strength
Tests on bricks
1) Dimensional Tolerance
2) Compressive Strength
3) Water absorption
4) Efflorescence
Tests on fine aggregates
1) Fineness modulus and grain size distribution
2) Specific gravity
3) Water absorption
4) Bulking.
5) Bulk density
Tests on coarse aggregates
1) Specific gravity and water absorption of coarse aggregates
2) Sieve analysis of coarse aggregates
3) Aggregate Crushing Value
4) Aggregate Impact value
5) Specific Gravity

Civil Engineering Drawing Laboratory

1) Plan, elevation, side view of residential/office buildings
 2) Drawing of 2 bed room / 3 bed room houses (Single and two story), ground and
first floor plans, elevation and section for load bearing and framed structures.
3) Detailing of doors/windows
4) Drawing of several types of footing, bricks work, floor, staircase, masonry, arches
and lintels.
5) Types of steel roof trusses.
6) Project on establishments like building/post office/Hostel/Library/Hospital/
Auditorium etc.

Hydraulics Laboratory

1) Study of Bernoulli’s Theorem

2) Determination of co-efficient of orifice
3) Determination of metacentric height of vessels.
4) Flow measurement by venturimeter.
5) Flow measurement by orificemeter.
6) Study of force due to impact of jet.
7) Study of flow visualization apparatus.
8) Determination of viscosity.

Concrete Laboratory
1) Concrete Making Materials
2) Hydration of Cement
3) Quality test on cement
4) Aggregates
5) Fresh Concrete : workability of concrete(slump test, compacting factor test, veebee consistometer test)
6) Hardened concrete
7) Durability
8) Concrete Mix Design
9) Special Concrete

Geotechnical Engineering Laboratory

1) Determination of field density and dry density by core cutter method.
2) Determination of field density and dry density by sand replacement method.
3) Determination of specific gravity of soil solid.
4) Determination of liquid limit and plastic limit of clayey soil. Demonstration
of shrinkage limit test.
5) Determination of gradation of soil by dry sieve analysis.
6) Determination of gradation of soil by hydrometer analysis.
7) Determination of density index / relative density of soil.
8) Determination of optimum moisture content and maximum dry density of
soil by proctor compaction test.
9) Determination of CBR value of soil by California bearing ratio test.

Geo Science Laboratory

1) Introduction to Crystallography: Identification of Crystals
 2) Introduction of minerals and the study of physical properties: Identification
of Quartz and feldspars.
3) Identification of important ore deposits.
4) Identification of igneous rocks.
5) Identification of sedimentary rocks.
6) Identification of metamorphic rocks.
7) Structural geology – strike and dip, fold, fault and unconformity.
8) Study of geological maps.

Foundation Engineering Laboratory

Tests on soil
1) Determination of co-efficient of permeability by Constant head method.
2) Determination of co-efficient of permeability by Falling head method.
3) Determination of soil shear strength parameters by Direct shear Test.
4) Determination of soil shear strength parameters by Triaxial
compression test (UU test).
5) Determination of soil shear strength parameters by Unconfined
compression test.
6) Determination of Compression index by 1-D Consolidation test.
7) Standard Penetration Test.

Tests on soil:
1) Determination of mass per unit area.
2) Determination of thickness
3) Determination of Specific gravity
4) Puncture resistance test
5) Apparent Opening Size

Transportation Engineering Laboratory

Tests on Subgrade Soil:

1)California Bearing Ratio Test
Tests on Aggregates:
1) Aggregate Gradation
2) Aggregate Crushing Value Test
3) Aggregate Impact Test
4) Los Angeles Abrasion Test
5) Shape Test
6) Soundness Test
7) Stripping Test.

Tests on Bituminous Materials:

1) Penetration Test.
2) Ductility Test
3) Softening Point Test (Ring &Ball)
4) Viscosity Test (absolute & kinematic)
5) Specific Gravity Test for Bitumen
6) Flash and Fire Point Test
 7) Determination of solubility in trichloroethlene

Traffic Study:
1) Traffic volume study
2) Vehicle Occupancy Survey
Water Resources Engineering Laboratory
1) Experiment on evaluation and variation of flow in a fixed bed flume.
2) Determination of losses in pipe fittings.
3) Study of hydraulic jump in a fixed bed flume.
4) Rainfall – Runoff relationships using Rainfall Simulator.
5) Determination of Manning’s and Chezy’s coefficients of roughness.
6) Velocity of a river flow across a given section using River Surveyor.
7) Computation of critical flow condition in a fixed bed flume.

Computer Aided Design Laboratory

1) SAP2000 / STAAD.Pro
2) SCiBridge
3) Plaxis 3D
4) Abaqus
5) IIT PAVE
6) MX-Road
7) PTV vision traffic suit software
8) ANSYS CFX
9) ArcGIS
10) Sewer GEMS

Structural Engineering Laboratory

1) To conduct flexural test on RCC beam.
2) To conduct quasi-static test on beam-column joint.
3) To conduct flexural test on RC slab.
4) To demonstrate mode shapes of a multi-storied model building.
5) To conduct unidirectional shaking test on building model.
6) To determine proof stress, ultimate strength and ultimate strain for rebar

Environment Engineering Laboratory

Tests on Water
Dissolved, suspended, total volatile, inorganic etc. determination of Acidity
determination of Alkalinity, Hardness determination, Chloride determination,
Iron Concentration,Sulphate determination, Jar test to determine optimum
coagulant dose, pH value determination, Turbidity determination.

Tests on Sewage:
Dissolved oxygen determination, Biochemical Oxygen Demand
(BOD) test, Chemical Oxygen Demand (COD) of sewage sample.
consistometer test)
. LIST OF PRACTICALS

Sl. No. Shop Description

1. CARPENTRY Study of Different Carpentry Tools and Pattern Making of T-Joint
Pattern Making of a Wooden Handle
2. FOUNDRY Study of Different Foundry Tools and Furnaces
Making a Green Sand Mould of Half Bearing Block
Making Green Sand Mold and Casting of Bearing Block
Demonstration of Injection Molding process
3. WELDING Arc Welding of Butt Joint
Gas Welding of Butt Joint
Study of Other Welding/Joining Techniq
4. MACHINE Study of Lathe and Job Preparation on it – Lathe Job – 1 (step turning)
Lathe Job – 2 (Threading and Knurling)
Study of Milling Machine and Demonstration of Job Preparation on it
Study of Different Drilling and Boring machines and Preparation of a
job involving both operations
Study of Shaping and Planning Machine and preparation of a job
Study of Grinding Machines and Demonstration of Surface Grinding
5. FITTING Study of Various Fitting Hand Tools, Marking and Measuring Devices
Preparation of a die (Turn – 1)
Preparation of a die (Turn – 2)
6. SMITHY Study of Different Forming Tools and Power Presses
7. MACHINE Study of Lathe and Job Preparation on it – Lathe Job – 1 (step turning)
Lathe Job – 2 (Threading and Knurling)
Study of Milling Machine and Demonstration of Job Preparation on it
Study of Different Drilling and Boring machines and Preparation of a job
involving both operations
Study of Shaping and Planning Machine and preparation of a job
Study of Grinding Machines and Demonstration of Surface Grinding
8. FITTING Study of Various Fitting Hand Tools, Marking and Measuring Devices
Preparation of a die (Turn – 1)
Preparation of a die (Turn – 2)
9. SMITHY Study of Different Forming Tools and Power Presses

WASTE WATER MANAGEMENT

1. Determination of DO, BOD, COD.

2. Determination of Nitrite and Nitrate nitrogen.
3. Determination of Ammoniacal and Total Kjeldahl Nitrogen.
4. Determination of phosphorus (total and available).
5. Determination of SVI (including MLSS and MLVSS estimations).
6. Settling column test for secondary setting tank design

Highway and Traffic Engineering

 1. C.B.R. Test
2. Aggregate Crushing Test
3. Aggregate Impact Test
4. Los Angles Abrasion Test
5. Specific Gravity and Water Absorption Test on Aggregates
6. Shape Tests
7. Penetration Test
8. Ductility Test
9. Softening Point Test
10. Flash & Fire Test
11. Specific Gravity Tests on Bitumen
12. Marshall Stability Test

Soil Mechanics

1 Determination of Moisture Content

2 Grain Size Distribution Analysis
3 Hydrometer Analysis
4 Atterberg Limits (LL, PL, SL)
5 Compaction Test
6 Permeability Test
7 Unit Weight Determination
8 Specific Gravity
9 Unconfined Compression Test
10 Direct Shear Test
11 Vane Shear Test
12 Triaxial Test (demonstration)
13 Consolidation Test (demonstration)
14 Visual Classification Tests (demonstration).

FOUNDATION ENGINEERING

1 Methods of Boring
2 Standard Penetration Test
3 Dynamic Cone Penetration Test
4 Plate Load Test,
5 Triaxial Tests (UU, CU, CD)
6 Consolidation Tests and
7 Static Cone Penetration Test (demonstration)