Scribd
Upload
60 views

606M2 Accelerometer

The Model 606M2 is a triaxial seat pad accelerometer designed for measuring whole body vibration according to ISO standards. It features a removable triaxial IEPE accelerometer sensor with 100mV/g output sensitivity for low frequency measurements down to 0.5Hz. The accelerometer has a measurement resolution of less than 0.4mg, ±50g dynamic range, and connects with a 10ft cable terminating in three BNC connectors.

Uploaded by

yogesh_gaidhane3743
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
60 views

606M2 Accelerometer

The Model 606M2 is a triaxial seat pad accelerometer designed for measuring whole body vibration according to ISO standards. It features a removable triaxial IEPE accelerometer sensor with 100mV/g output sensitivity for low frequency measurements down to 0.5Hz. The accelerometer has a measurement resolution of less than 0.4mg, ±50g dynamic range, and connects with a 10ft cable terminating in three BNC connectors.

Uploaded by

yogesh_gaidhane3743
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Model 606M2 Accelerometer

Seat Pad Accelerometer Removable IEPE Accelerometer Whole Body Vibration 100mV/g Output ISO 10326-1 Configuration
The Model 606M2 is an IEPE triaxial seat pad accelerometer designed specially for characterizing whole body vibration in accordance with ISO 2631-1 and ISO 8041. The seat pad incorporates a removable triaxial IEPE accelerometer with 100mV/g output sensitivity. The model 606M2 is designed for low frequency measurements with a measurement resolution of <0.4mg. A detachable 10ft cable is includes with three BNC connectors for simple interface. FEATURES

dimensions

Three Independent Circuits IEPE Interface 50g Dynamic Range High Over-Range Protection 0.5-1000Hz Frequency Response Stable Temperature Response

APPLICATIONS

Whole Body Vibration Study Vibration/Shock Monitoring Helicopter Flight Testing Heavy Equipment Testing Biodynamic Study

Model 606M2 Rev.B 32 Journey Ste. 150 Aliso Viejo, CA 92656

www.meas-spec.com 949-716-5377

12/22/2011 t&[email protected]

Model 606M2 Accelerometer


performance specifications
All values are typical at +24C, 100Hz and 4mA excitation unless otherwise stated. Measurement Specialties reserves the right to update and change these specifications without notice. Standard product parameters are described in PSC-1003 for Plug & Play AC Accelerometers. Parameters DYNAMIC Range (g) Sensitivity (mV/g) Frequency Response (Hz) Natural Frequency (Hz) Non-Linearity (%FSO) Transverse Sensitivity (%) Shock Limit (g) ELECTRICAL Compliance Voltage (Vdc) Excitation Current (mA) Bias Voltage (Vdc) Output Impedance () Full Scale Output Voltage (V) Residual Noise (g RMS) Discharge Time Constant (sec) ENVIRONMENTAL Temperature Response (%) Operating Temperature (C) Storage Temperature (C) Humidity PHYSICAL Case Material (Seat Pad) Case Material (Accelerometer) Sensing Element Case Material Electrical Connector Weight (grams) Calibration supplied: Optional accessories:

Notes 50 100 0.5-1000 >25000 1 <5 5000 18 to 30 2 to 10 8 to 12 <100 5 0.0004 0.8 to 1.2 <0.17%/C -20 to +85 -20 to +85 Hermetically Sealed Nitrile Rubber Titanium Ceramic (shear mode) Titanium 3x BNC Connectors 350 NIST Traceable Amplitude Calibration from 1Hz to 100Hz 4-Channel PE & IEPE Signal Conditioner 10% 5%

Room Temperature Broadband 1Hz to 10kHz

CS-LFREQ-0010 161A

The information in this sheet has been carefully reviewed and is believed to be accurate; however, no responsibility is assumed for inaccuracies. Furthermore, this information does not convey to the purchaser of such devices any license under the patent rights to the manufacturer. Measurement Specialties, Inc. reserves the right to make changes without further notice to any product herein. Measurement Specialties, Inc. makes no warranty, representation or guarantee regarding the suitability of its product for any particular purpose, nor does Measurement Specialties, Inc. assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability, including without limitation consequential or incidental damages. Typical parameters can and do vary in different applications. All operating parameters must be validated for each customer application by customers technical experts. Measurement Specialties, Inc. does not convey any license under its patent rights nor the rights of others.

ordering info
PART NUMBERING 606M2 Model Number

Model 606M2 Rev B 32 Journey Ste. 150 Aliso Viejo, CA 92656

www.meas-spec.com 949-716-5377

12/22/2011 t&[email protected]

You might also like