3D papercraft DIY - POKEMON CUBONE

TEMPLATES & ASSEMBLING INSTRUCTIONS

Model size is 32x27x27cm

 CONTENT

Chapter 1. Preparing For Assembly - pages 1.1-1.3

Chapter 2. Assembly Process - pages 2.1-2.8

Chapter 3. Templates WITH-NO-FILL - pages 3.1-3.13

Chapter 4. COLORED Templates - pages 4.1-4.10

 Chapter 1

Preparing For Assembly

 EQUIPMENT YOU NEED

A4
B&W A4
Letter

Eleven sheets of a paper for the

COLORED templates version, or
A4 / A31 Printer
fifteen sheets of a paper
B&W or color
for the version of templates WITH-
for printing templates
NO-FILL, for printing on the color
paper

Scissors Two ballpoint pens with

for cutting parts different colors for
(or Stationery knife together punching of two types
with a metal ruler) folding lines, (or just one
ballpoint pen with no ink)

Glue Tweezers, we recommend

for attaching parts 2 Ruler for folding using tweezers
to glue a small details

1
To make the extra large size product, you can print out the templates on A3 paper, using a scaling for pages.
But, in this case, we recommend using paper 240-360 g/m2
2
We recommend to use a non-water based glue to prevent deformation of the surfaces by moisture

Page 1.1
 LINE TYPES & SYMBOLS GUIDE

- cut line of the details - folding "mountain" line - folding "valley" line

like "valley" fold

when viewed from
the outward of the model

like "mountain" fold

when viewed from
the outward of the model

ID-number of the detail2

214

B25
213
21
2

22
4 8 210
30 22
31
This letter indicates the
A10
89

3
22
216

color according to the

216

40
Basic Color Scheme,
21

41
please see pages 1.3

ID of the edge1, need to attach

to the edge with same ID

1
Due the "COLORED" version of templates has no "ID of the edge" markers, please see the Chapter"Templates
WITH-NO-FILL" for matching IDs. But please keep in mind that the "WITH-NO-FILL" templates displays are mirrored,
unlike the "COLORED" templates.
2
In the colored version of the templates, the ID-numbers are located on one of the flaps of the part.

Page 1.2
 BASIC COLOR SCHEME

Color A

Color B

Color D

Color F

Color E

Color C

Color B

Color A

Color A

Color A Color B Color C Color D Color E Color F

Page 1.3
 Chapter 2

Assembly Process
 ASSEMBLY PROCESS

Step 01. Attach PARTS B26, B27 and A40 Step 02. Attach PARTS A8 and A41

Step 03. Attach PARTS A39 and A43 Step 04. Attach PARTS A34 and A51

Step 05. Attach PARTS A53 and E4 Step 06. Attach PARTS A12 and E2

Page 2.1
 ASSEMBLY PROCESS

Step 07. Attach PARTS A13 and A54 Step 08. Attach PARTS D3, E3, F2, D4, D5

Step 09. Attach PARTS B8 and A37 Step 10. Attach PARTS D2, E1, F1, D6, D1

Step 11. Attach PARTS B7 and A45 Step 12. Attach PARTS A11 and A42

Page 2.2
 ASSEMBLY PROCESS

Step 13. Attach PARTS A46 and A52 Step 14. Attach PARTS A35, A48 and A3

Step 15. Attach PARTS A10, A56 and A57 Step 16. Attach PARTS A21, A22 and A25

Step 17. Attach PARTS A15, A17 and A24 Step 18. Attach PARTS A5 and A6

Page 2.3
 ASSEMBLY PROCESS

Step 19. Attach PARTS A28 and A29 Step 20. Attach PARTS A4 and A7

Step 21. Attach PARTS A27 and A30 Step 22. Attach PARTS A36 and A47

Step 23. Attach PARTS A20 and A31 Step 24. Attach PARTS A23, A32 and A55

Page 2.4
 ASSEMBLY PROCESS

Step 25. Attach PARTS A1 and A33 Step 26. Attach PARTS A26, A50 and A44

Step 27. Attach PARTS A2, A19 and A14 Step 28. Attach PARTS A38 and A49

Step 29. Attach PARTS B18, B19 and B20 Step 30. Attach PARTS B21 and B24

Page 2.5
 ASSEMBLY PROCESS

Step 31. Attach PARTS B22 and B23 Step 32. Attach PARTS A9, B5 and B10

Step 33. Attach PARTS B14 and B17 Step 34. Attach PARTS B6 and B11

Step 35. Attach PARTS B12, B13 and B25 Step 36. Attach B28, B29, B30, B31, B32, B33

Page 2.6
 ASSEMBLY PROCESS

Step 37. Attach B2, B4, B39, B40, B41, B42 Step 38. Attach PARTS B9 and B46

Step 39. Attach PARTS B3 and B47 Step 40. Attach PARTS B36 and B38

Step 41. Attach PARTS B37 and B1 Step 42. Attach PARTS C1 and C3

Page 2.7
 ASSEMBLY PROCESS

Step 43. Attach PARTS C2 and C4 Step 44. Attach PARTS B45 and B48

Step 45. Attach PARTS B43 and B44 Step 46. Attach PARTS B34 and B35

Step 48. Attach PARTS A16 and A18

Step 47. Attach PARTS B15 and B16 and the model is fully assembled

Page 2.8
 Chapter 3
Templates WITH-NO-FILL

For printing on color paper

NOTE: The printed side will be the inner side of the model