0% found this document useful (0 votes)
112 views1 page

Igate GW240-H

The document outlines the configuration settings for WAN, LAN, and wireless interfaces, including options for IPv4/IPv6, encapsulation types, VLAN settings, and firewall status. It provides details on PPPoE connection settings, including username and password, as well as IP options such as static and dynamic IP addresses. Additionally, it mentions NAT and IGMP proxy settings for network management.

Uploaded by

xuân long mai
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
112 views1 page

Igate GW240-H

The document outlines the configuration settings for WAN, LAN, and wireless interfaces, including options for IPv4/IPv6, encapsulation types, VLAN settings, and firewall status. It provides details on PPPoE connection settings, including username and password, as well as IP options such as static and dynamic IP addresses. Additionally, it mentions NAT and IGMP proxy settings for network management.

Uploaded by

xuân long mai
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Language:

Access
Status Quick Setup Interface Setup Advanced Setup Maintenance
Management
WAN
WAN LAN Wireless 2.4GHz Wireless 5GHz Wireless Mesh Security

CRE

IPv4/IPv6

Status : Activated Deactivated

IP Version : IPv4 IPv4/IPv6 IPv6

Encapsulation

ISP : Dynamic IP Address

Static IP Address

PPPoE

Bridge Mode

802.1q

802.1q : Tag Untag

VLAN ID : 11 (range: 0~4095)

802.1p : Remark 0 (range: 0~7)

MVLan Options

Multi VLan : -1 (range: -1~4095, -1 means no multi vlan)

Firewall

Firewall : Enable

PPPoE

Username : dqu0135fttx

Password : ●●●●●●●●

Bridge Interface : Activated Deactivated

Connection Setting

Connection : Always On (Recommended)

Connect Manually

IP Options
IP Common Options

Default Route : Yes No

IPv4 Options

Get IP Address : Static Dynamic

Static IP Address : 0.0.0.0

IP Subnet Mask : 0.0.0.0

Gateway : 0.0.0.0

NAT : Enable

TCP MTU Option : TCP MTU(default:1492) 1492 bytes

IGMP Proxy : Enable Disabled

You might also like