DT1131-C

TUNNELING DRILL
TECHNICAL SPECIFICATION

Sandvik DT1131-C is a 3-boom electro-hydraulic jumbo KEY FEATURES

for fast and accurate drilling in tunneling and cavern Coverage area 183 m² (18 210 x 10 920 mm)
excavation. The hydraulic controlled drilling system with Hydraulic rock drill 1 x RD520
added automatic functions and optional instrumentation Drill feed 1 x TF500-18’
level enable productive and high quality excavation. Boom 1 x SB150
Control system THC561, hydraulic
Sandvik RD520 rock drills deliver superior performance Hole length Up to 6 180 mm
with high consumable life. Sandvik SB150 universal Turning radius 11 860 mm
booms have a large optimum shaped coverage and full 2 950 mm / 3 860 mm (TC11)
automatic parallelism. In addition to face drilling the unit Tramming / drilling width
3 050 mm / 3 860 mm (TC12)
can also be used for cross-cutting and bolt hole drilling. 4 140 mm / 4 140 mm (TC11)
Tramming / drilling height
4 230 mm / 4 230 mm (TC12)
An optional utility boom for bolting and utility works is Tramming length 17 780 mm (with TF500-18’)
available. The powerful 4-wheel-drive wheel steered 40 000 kg (without utility boom)
Total weight
carrier ensures rapid and safe tramming with good depending on options
balance. 44 000 kg (with utility boom)
Total weight
depending on options

1. SANDVIK DT1131-C - TUNNELING DRILL

HYDRAULIC ROCK DRILL CONTROL SYSTEM
Type of rock drill RD520 (TS2-235) Type of control system THC561, hydraulic (5-1020)
Percussion power 20 kW Direct control
Percussion pressure Max. 220 bar Manual boom control Fully proportional
Percussion rate 74 Hz Hydraulic parallelism

Stabilizer Hydraulic Drilling control Feed / percussion control

Rotation speed Max. 280 rpm (with OMS125) Automatic cycle Stop and return automatics
Rotation torque 625 Nm (with OMS125)
Hole size (drifting) 43 - 64 mm ELECTRIC SYSTEM
Hole size (cut hole) 76 - 127 mm Standard voltage 380 - 690 V (± 10%)
T38 - H35 - R32 Total input power 200 kW
Recommended rod
T38 - R39 - R35 Main switch MSE3
Shank adapter T38 (male) IP classification Specification TS2-132
Weight 225 kg Starting method Star-delta starter 380 - 690 V
Length 1 010 mm Automatic cable reel TCR6EHD
Cable reel control (in / out) Operator station
BOOM Front lights
12 x 50 W LED (24V)
Type of boom SB150 (TS2-267) (combined working and driving)

Parallel coverage 159 m² Rear lights

4 x 50 W LED (24 V)
Parallelism Hydraulic (combined working and driving)

Boom extension 3 200 mm Rear brake / park lights 2 x Red LED

Feed extension 1 650 mm
Boom weight, net 3 300 kg AIR AND WATER SYSTEM
Roll-over angle 358° Flushing of holes By water
Water pump type WBP3
FEED Water pump capacity 215 l/min

Feed Total Hole Rod Net Water pump inlet pressure 2 - 7 bar (Min.)
Feed
force length length length weight Flushing water pressure 10 - 15 bar
type
(Max.) (mm) (mm) (mm) (kg) Shank lubrication device SLU-3 (air / oil mist)
TF500-12’ 25 kN 5 330 3 440 3 700 500 Air compressor CTN10, 1 m³/min (7 bar)
TF500-14’ 25 kN 5 940 4 050 4 305 530 Oil consumption 180 - 250 g/h
TF500-16’ 25 kN 6 550 4 660 4 915 560 Air consumption 250 - 350 l/min
TF500-18’ 25 kN 7 160 5 270 5 525 590
TF500-20’ 25 kN 7 770 5 880 6 135 620 OPERATOR’S SAFETY CABIN
TF500-21’ 25 kN 8 075 6 180 6 440 640 Safety cabin FOPS (ISO 3449)
Seated tramming
Operation
UTILITY BOOM (OPTIONAL) Standing drilling
Type of utility boom SUB5A (TS2-308) According to EN791
Boom extension 2 x 3 000 mm Sound pressure level Operator station: 80 dB(A)
Boom weight,net 2 675 kg Emitted: 128 dB(A)

Max allowed load 510 kg Floor Water-washable

Max allowed load with safety canopy 400 kg Air conditioning EU6/7 filtering capacity
Cabin heating During tramming and drilling
HYDRAULIC SYSTEM Electricity outlets 1 x 12 V
Powerpack HPP555 (3 x 55 kW) Stairs and indoors lights LED lights
Percussion pump 110 cc (variable)
Rotation pump 60 cc (variable)
HVAC pump
26 cc (gear)
(Heating, Ventilation and A/C)
Filtration size (pressure / return) 20 µ / 10 µ
Oil tank volume 470 liters
Tank filling Electric pump
Cooler for hydraulic oil OW30 oil-to-water (2 x 30 kW)

2. SANDVIK DT1131-C - TUNNELING DRILL

CARRIER OPTIONAL ITEMS
Type of carrier TC11
Greasing systems
Rear oscillation ± 8° Automatic system Lincoln (for carrier, boom,rod
Ground clearance 400 mm handler and utility boom)
Manual system Specification 5-2110
Diesel engine MB OM904LA, 110 kW, Tier 3, Stage IIIA
Transmission Hydrodynamic, Spicer T20 000
Electric system
Axles Dana Spicer 37R (front) / 213 (rear) *Voltage option 1 000 V (50 Hz)
Tires 14.00-24 28RL Electric cables Specification TS2-121
Spooling device for cable reel For voltages 690 - 1 000 V
Service brakes Hydraulically operated wet disc brakes
Ground fault and overcurrent unit VYK
Parking / emergency brakes SAHR type, fail safe wet disc brakes Electricity outlet in front carrier 1 x 400 V or 1 x Main voltage
Fuel tank 150 liters Remote control for reel(s) At rear machine
Amber flashing light LED (24 V)
15 km/h (Horizontal)
Tramming speed
3.5 km/h (14%=1:7=8°) Air and water system
Gradeability / sideways tilt Max. 15° / 5° Flushing flow supervision
*Air compressor CT28 (2.8 m³/min at 7 bar)
Carrier stabilization TJ60 (front), TJ75 (rear)
Air mist flushing External air / water supply (incl. IP5
Hand throttle Standard air cleaner)
Centralized greasing points Carrier Additional air capacity CT28 compressor, 2 x 80 liters
receiver (incl. IP5 air cleaner).
Handheld fire extinguisher 1 x 7.7 kg Type ABC
External air connection IP5 air cleaner
Tramming alarm Standard Water hose reel THR5E with water hose
Colour scheme Sandvik standard 45 mm (1 ¾”), 60 m
2 x Operator’s manual Operator’s safety cabin
2 x Maintenance manual Reduced tramming speed 3rd gear lockout
Documentation 2 x Technical manual (in English only)
2 x Parts manual (in English only) Fire suppression system
1 x Toolman CD Additional fire extinguisher 7.7 kg (type ABC)
Manual system Ansul (8 nozzles)
Automatic system Ansul (8 nozzles)
OPTIONAL ITEMS

Rock drill
Carrier
*Type of rock drill HLX5 instead of RD520
*High speed carrier TC12, incl. MB OM906LA, 170 kW,
Power extractor For RD520 or HLX5
Tier 3, Stage IIIA, with Spicer
Feed T32 000 transmission
*Feed length 12’, 14’, 16’, 20’, 21’ *High speed carrier TC12, incl.QSB6.7, 164 kW,
*Telescopic feed TFX6/12, TFX8/14, TFX10/16 Tier 4i, Stage IIIB, with Spicer
Rod retainer SCR with TF feed (incl. safety wire) T32 000 transmission and front
TRR1 with TFX feed (incl. safety wire) axles 43R.
Two rods system TRS (incl. SCR for 10-12 ft extension Exhaust catalyzer For Tier 3 engines
rods) *Tires Foam filled tires
Start-up drilling tools For 45 -51 mm holes Fast filling system For fuel or complete
Casing drilling set For 90 mm (3 ½”) or 115 mm (4 ½”) Rod rack on carrier side 12 to 21 ft rods
pipes Tramming camera Rear and side
Wheel chocks and holders 2 pieces
Utility boom
Safety canopy FOPS approved
Sliding FOPS safety canopy Extra items
Spot lights 2 x 17 W LED Spare rock drill RD520 or HLX5
Rod racks For 4 pcs of 10 or 12 ft rods Spare wheel assembly Standard or foam filled tires
RX expansion bolt installation kit D30 mm or D41 mm Special tools for rock drill Field kit or complete set
Tunnel laser set
Hydraulic system Documentation Extra manuals
Utility boom pump 60cc (gear) Extended warranty One year additional
*Filling pump for hydraulic oil Manual Package: Country specific EUR package
*Biodegradable oils Shell Naturelle HFE46/68 options
Cooler for hydraulic oil OA30 oil-to-air (2 x 30 kW) Package: Anti-freezing Block heater for engine, heater for
Vacuum pump For hydraulic oil hydraulic oil, water circuit flushing
with air, antifreeze adding in water
Control system
circuit.
Constant speed drilling Replaces feed / percussion control
Access detector system Mandatory in Europe (TS2-211) *) replaces standard feature
Drilling instrument TCAD+ with iSURE I-II design and
reporting
TMS DDSS3 for TF feed
Additional display Additional display for TCAD+ (2 pcs)

Cleaning system
Low pressure system with reel Up to 15 bar (TS2-343)
High pressure system with reel Up to 180 bar (TS2-343)

3. SANDVIK DT1131-C - TUNNELING DRILL

 10 920

400

TS2-223:02/ENG/METRIC © Sandvik Mining and Rock Technology 2017 SANDVIK is a registered trademark owned by Sandvik Intellectual Property AB in Sweden and other countries.
2 950
3 860
All dimensions in mm
17 050
18 210

TF500-12’ TF500-14’ TF500-16’ TF500-18’ TF500-20’ TF500-21’

Feed length 5 330 mm 5 940 mm 6 550 mm 7 160 mm 7 770 mm 8 075 mm
Overall length 15 850 mm 16 740 mm 17 340 mm 17 780 mm 18 540 mm 18 740 mm

H Height (H)

TC11carrier 4 140 mm
DT1131

TC12 carrier 4 230 mm

H 3 060

1 390

3 825 4 200
Overall length

All dimensions in mm

11 860

6 000
All dimensions in mm

Sandvik Mining and Rock Technology reserves the right to make changes to the information on this data sheet without prior notification to users.
Please contact a Sandvik representative for clarification on specifications and options.

SANDVIK.COM

4. SANDVIK DT1131-C - TUNNELING DRILL