AJ AK AL AM AN AO AP AQ

GENERAL NOTES
- All work is to comply with National Building
Regulations and Local Authority
AA AB AC AD AE AF AG AH AI -All dimensions are to be checked on site and on
drawings, any discepancies to be reported to the
Achitect is put in hand
-only figured dimensions are to be taken
-The Drawing is the Property of the Architect
-Copyright is reserved by them and the drawing is
issued in condition that it has not been copied,
reproduced,retained or disclosed to any un
authorized person either wholy or in parts without
the consent of the archirect
-All materials and workmanships are to be the best
of their respective kinds. Building Materials used in
this contract are to conform to Local authority
specifications
-All level are to be checked on site and on drawings
before work is put in hand, any discepancies to be
reported to the Architect
-All levels shown are finished floor levels
-All works are to be carried out with strict
0.300 0.300
2.016 1.036 4.877 4.877 4.877 accordance of the architect
-All foundation and reinforced concrete to be built in
0.300 0.300
2.732 3.068 2.000 2.207 1.568 2.725 strict accordance with the Structural Enginers
Drawings and details. Concrete suspended floors
and roof details are to be the structural engineers
Approval
-All water drainage are to be in accordance to the
specialist details
-Drainage systems are to comply with the national
South Elevation South Elevation
1 2 building regulations, and the requirement of the
1:100 1:100 local authority.
inspection eyes at all bents and juctions,
-Rodding eye to comply with the requirements
of the local authority,
-Soil conditions to be inspected by soil Engineer.
-All works to be in accordance with the Local
authority Building /construction code.
-Size, components, materials & finishes alternatives
may be used, where approved by the Architect.
AQ AP AO AN AM AL AK AJ -Wall thicknesses 150mm for unfinished wall and
180 for finished wall.

REV NOTES
DATE BY REVISION DETAILS

AI AH AG AF AE AD AC AB AA

ARCHITECT'S STAMP &

SIGNATURE:

CLIENT'S NAME:
SSEMBATYA RICHARD

PROJECT'S TITLE:
RESIDENTIAL APPARTMENTS

0.300
4.877 4.877 4.877 1.036 2.016
0.300
2.725 1.568 2.207
0.300
2.000 3.068 2.732
0.300 LOCATION
WAKISO DISTRICT, GARUGA

DRAWING TYPE:
WORKING DRAWINGS
DRAWINGS DESCRIPTION:
ELEVATIONS, ROOF PLAN,
SEPTIC TANK & SOAK PIT
North Elevation East Elevation
3 4
DETAILS, SCHEDULES

1:100 1:100 FILE REF: SCALE:

DATE:
1:100
06/18/24
DWG NO.

0002 DRAWN: SSEBULIME ISAAC

A002
0755662133/ 0764390571

GSPublisherVersion 0.0.100.100
 R S U V Z Y X W

W X Y Z
0.800 0.800
9.670

0.800

0.800
4.680 4.523 4.357
2.204 1.626 3.700
R GENERAL NOTES
- All work is to comply with National Building
Regulations and Local Authority
13.560 -All dimensions are to be checked on site and on
drawings, any discepancies to be reported to the
Achitect is put in hand
-only figured dimensions are to be taken
East Elevation North Elevation
2 3 S -The Drawing is the Property of the Architect
1:100 1:100 -Copyright is reserved by them and the drawing is
S

9.204
issued in condition that it has not been copied,
reproduced,retained or disclosed to any un
authorized person either wholy or in parts without
V U S R W X Y Z the consent of the archirect

13.560
-All materials and workmanships are to be the best
of their respective kinds. Building Materials used in
this contract are to conform to Local authority
U specifications
-All level are to be checked on site and on drawings
U before work is put in hand, any discepancies to be

0.800
reported to the Architect
-All levels shown are finished floor levels
3.700 1.626 2.204 -All works are to be carried out with strict
accordance of the architect
-All foundation and reinforced concrete to be built in

4.356
strict accordance with the Structural Enginers
4.357 4.523 4.680
V Drawings and details. Concrete suspended floors
and roof details are to be the structural engineers
West Elevation V

0.800
Approval
4 5
South Elevation -All water drainage are to be in accordance to the
1:100 1:100 specialist details
0.800 0.800
2.140 7.530 -Drainage systems are to comply with the national
building regulations, and the requirement of the
NORTH ELEVATION1 local authority.
6 Roof Plan W X Y Z inspection eyes at all bents and juctions,

W X Y Z
1:100 -Rodding eye to comply with the requirements
of the local authority,
-Soil conditions to be inspected by soil Engineer.
-All works to be in accordance with the Local
7.730
authority Building /construction code.
7.730
0.200 -Size, components, materials & finishes alternatives
0.200 3.700 0.200 1.226 2.004 0.200
may be used, where approved by the Architect.
ROOF DETAILS -Wall thicknesses 150mm for unfinished wall and
R R CEILING DETAILS
W X Y Z Roof Pitch 30o 180 for finished wall.
1.111
0.200

0.200
1.529

3.700 1.226 2.004 Mix 1:3 cem:sand mortar G-26roofing iron sheets nailes
W/C on to expanded metal lathering on 75x50mm rafters 100x50mm rafter 100x50mm
1.991

NOTES
on to 100x50 branderings struts and ties
at 600c/. on 150x75mm wall plate REV
3.701
2.000
3.688

KITCHEN
W2

DATE BY REVISION DETAILS

1.500

W1
4.680

4.280
4.480

BED ROOM D2
D2

1.293
1.651

3300

0.600 0.334 0.413

Roof plan
SHADE

D2

Ring bean to eng. details

S S ARCHITECT'S STAMP &
0.395

SITTING ROOM
1.500
W1

4.200
3.700 1.626 2.204 SIGNATURE:
3.139

DINNING SHADE
1.500

BED ROOM
D1

ROOM
0.368
SITTING

0.900
ROOM
13.760

13.760
13.760
0.548

0.200
D2
4.324
4.524
4.524

Ground Floor Main House

0
EAST ELEVATION1

WEST ELEVATION2

1.804
1.500

S-05 S-05
W1

1.417
0.600
1.417
D3

W3

W/C
0.580

SUBSTRUCTUAL DETAILS
U U
3.561
25mm sand screed 1:3 CLIENT'S NAME:
D3
1.422

1.717
0.600

W/C
1.717

SECTION 2 on 100mm floor slab 1:3:6

W3
D2

7 on DPM over 50mm blinding

on 150mm hard core SSEMBATYA RICHARD
1:100
1.007

D2 on well compacted murram, 1000mm plinth

on 200*650 1:3:6 strip foundation
2.587 0.200
1.500
4.356

4.356
4.556

antitermite, depth determined

W1

BED ROOM
on site to structural engineer's detail. PROJECT'S TITLE:
1.500
W1
2.587

BED ROOM
RESIDENTIAL APPARTMENTS
1.634

1.003

4.070

V V
LOCATION
0.200

0.200

0.200 3.060 0.200 4.070 0.200

7.730 WAKISO DISTRICT, GARUGA
7.730
DRAWING TYPE:
WORKING DRAWINGS
W X Y Z DRAWINGS DESCRIPTION:
ELEVATIONS, ROOF PLAN,
SEPTIC TANK & SOAK PIT
DETAILS, SCHEDULES

SOUTH ELEVATION1
FILE REF: SCALE: 1:100 DWG NO.

Ground Plan
1 0002
DATE: 06/18/24
A002
1:100 DRAWN: SSEBULIME ISAAC
0755662133/ 0764390571

GSPublisherVersion 0.0.100.100
 Site
Area
GENERAL NOTES
- All work is to comply with National Building
Regulations and Local Authority
-All dimensions are to be checked on site and on
Access drawings, any discepancies to be reported to the
Achitect is put in hand
Root -only figured dimensions are to be taken
-The Drawing is the Property of the Architect
-Copyright is reserved by them and the drawing is
issued in condition that it has not been copied,
reproduced,retained or disclosed to any un
authorized person either wholy or in parts without
the consent of the archirect
-All materials and workmanships are to be the best
of their respective kinds. Building Materials used in
this contract are to conform to Local authority
specifications
-All level are to be checked on site and on drawings
before work is put in hand, any discepancies to be
reported to the Architect
-All levels shown are finished floor levels
-All works are to be carried out with strict
accordance of the architect
-All foundation and reinforced concrete to be built in
Site Location
1 strict accordance with the Structural Enginers
Drawings and details. Concrete suspended floors
1:100 and roof details are to be the structural engineers
Approval
-All water drainage are to be in accordance to the
specialist details
-Drainage systems are to comply with the national
building regulations, and the requirement of the
local authority.
inspection eyes at all bents and juctions,
-Rodding eye to comply with the requirements
Boundery Wall
of the local authority,
23.600 -Soil conditions to be inspected by soil Engineer.
-All works to be in accordance with the Local
Septic Tank & Gate Details
3 authority Building /construction code.

1:100 -Size, components, materials & finishes alternatives

may be used, where approved by the Architect.
-Wall thicknesses 150mm for unfinished wall and
l
al
W

180 for finished wall.

ry
de

67
un

.3

NOTES
Bo

21

REV
DATE BY REVISION DETAILS
MH MH MH

Septic Tank

2.000
Boundery Wall
1.000

Existing
37.387

Soak Pit

MH
MH MH
MAIN ARCHITECT'S STAMP &
HOUSE SIGNATURE:
3.809
STORIED
BUILDING
3.179
19.774

MH

CLIENT'S NAME:
SSEMBATYA RICHARD
10.109

5 4
2 2.8
PROJECT'S TITLE:
65

3.992
4.4

36.942 RESIDENTIAL APPARTMENTS

39
6.9 Access Road LOCATION
Boundary Wall and Gate Details WAKISO DISTRICT, GARUGA

4
Site Plan 1:50 DRAWING TYPE:

2 1:100 WORKING DRAWINGS

DRAWINGS DESCRIPTION:
ELEVATIONS, ROOF PLAN,
SEPTIC TANK & SOAK PIT
DETAILS, SCHEDULES

FILE REF: SCALE: 1:100 DWG NO.

DATE: 06/18/24
0002 DRAWN: SSEBULIME ISAAC
A002
0755662133/ 0764390571

GSPublisherVersion 0.0.100.100
 AJ AK AL AM AN AO AP AJ AK AL AM AN AO AP
18.283 18.283
2.687
0.600
1.157 3.000 1.818 3.000 1.923 3.000 1.098
AQ 2.616
0.670
1.157 3.000 1.818 3.000 1.923 3.000 1.098
AQ
AA 0.600
AA AA 0.600
AA
2.687
W3
1.157 3.000 1.818 3.000 1.923 3.000 1.098 2.687
W3
1.157 3.000 1.818 3.000 1.923 3.000 1.098
GENERAL NOTES
- All work is to comply with National Building
0.300

0.300

0.300

0.300
AB 1.500 W1 W1 W1
AB AB 1.500 W1 W1 W1
AB
0.902

0.902

0.902

0.902
D2 4.577 4.577 4.577 D2 4.577 4.577 4.577 Regulations and Local Authority
0.300

0.300
-All dimensions are to be checked on site and on
3.032

3.032
1.500 1.500
0.902

0.902
D2 D2
drawings, any discepancies to be reported to the
1.831

1.831
AC AC AC AC Achitect is put in hand
6.401

5.801

5.801

5.801

5.801

5.801

6.401

6.401

5.801

5.801

5.801

5.801

5.801

6.401
6.101

6.101
11 10

9
0.736
11 10

9
0.736 -only figured dimensions are to be taken
-The Drawing is the Property of the Architect
12 12

13 8 13 8

7 7
3.068
3.068

3.068
3.068
14 14

-Copyright is reserved by them and the drawing is

19G x 0.300

19G x 0.300
20R x 0.150

20R x 0.150
15 6 15 6

16 5 16 5

issued in condition that it has not been copied,

17 4 17 4

3 3
W2 W2 W2 W2 W2 W2
18 18

AD AD AD AD

0.300

0.300
2 2
D1 D1 D1 D1 D1 D1
reproduced,retained or disclosed to any un
19 19

20 1 20 1
UP UP
DOWN DOWN

authorized person either wholy or in parts without

1.700

1.700
the consent of the archirect
AE AE AE AE
-All materials and workmanships are to be the best
AF
0.300
2.015
0.382 0.314
0.900 3.000 0.900
0.397
3.000
0.582
0.900
0.361
3.000 AF AF
0.300
2.015
0.382 0.314
0.900 3.000 0.900
0.397
3.000
0.582
0.900
0.361
3.000 AF of their respective kinds. Building Materials used in
0.300 0.736 0.300 0.300 0.736 0.300
0.300
1.499
0.736
4.577 4.577 4.577
0.300 0.300
1.499
0.736
4.577 4.577 4.577
0.300 this contract are to conform to Local authority
AG
2.015 5.177
18.283
4.957 4.497
AG AG
2.015 4.877
18.283
4.877 4.877
AG specifications
-All level are to be checked on site and on drawings
before work is put in hand, any discepancies to be
AH AH AH AH
reported to the Architect
-All levels shown are finished floor levels
-All works are to be carried out with strict
AI AI AI AI
accordance of the architect
AQ AQ -All foundation and reinforced concrete to be built in
strict accordance with the Structural Enginers
Drawings and details. Concrete suspended floors
AJ AK AL AM AN AO AP AJ AK AL AM AN AO AP and roof details are to be the structural engineers
Approval
G1 Plan G2 Plan
2 3 -All water drainage are to be in accordance to the
specialist details
1:100 1:100 -Drainage systems are to comply with the national
building regulations, and the requirement of the
local authority.
DOOR SCHEDULE
inspection eyes at all bents and juctions,
Type Mark Width Height Count Description -Rodding eye to comply with the requirements
0.800
14.930
0.800
D1 900 2400 09 Steel Casement Door with P.V.O of the local authority,
D2 700 2100 06 Steel Casement Hinged Casement Door -Soil conditions to be inspected by soil Engineer.
S-06

D3 900 2400 01 Steel Casement Hinged Door with Transom -All works to be in accordance with the Local

0.800

0.800
D4 900 2400 01 Steel Casement Hinged Door with Transom authority Building /construction code.
North Elevation D5 900 2400 01 Steel Casement Hinged Door with Transom -Size, components, materials & finishes alternatives
may be used, where approved by the Architect.
Total count 18
-Wall thicknesses 150mm for unfinished wall and
180 for finished wall.
S-07

AJ AK AL AM AN AO AP
NOTES
8.401

8.401
19.202 REV
0.919
0.300 0.300 0.300
18.283
0.300 0.300 AQ WINDOW SCHEDULE DATE BY REVISION DETAILS
AA AA
0.919 3.053 4.577 4.577 4.577

0.919 4.444 3.000 1.818 3.000 1.923 3.000 1.098

Type Mark Width Height Count Description
0.300

0.300

0.300

0.300

AB AB W1 3000 1800 09 AluminiumTriple Historic Window P.O.V

W1 W1 W1
3000 300
1.121

3.053 4.577 4.877 4.577 W2 09 Aluminium StoreFront Window

2.103

Aluminium StoreFront Window with Transom

W3 600 1200 02
ARCHITECT'S STAMP &
0.900
West Elevation

D4
W4 600 600 02
0.800

0.800
Aluminium InsdeOutside Historic Window

AC 2.015 0.736
AC W5 2000 1500 02 Aluminium Multi sash Window P.O.V SIGNATURE:
East Elevation
5.801

5.801

5.801

6.401

5.801

6.401

11 10

0.800 0.800
9
Total count 24
7.801

7.801

12
8 14.930
3.397

3.397

0.800 0.800
13
7
4.782

14.930
14
19G x 0.300
20R x 0.150

15 6

16 5

17 4

3
W2 W2 W2
18

AD 2
AD
0.800

0.800
0.300

19
D1 D1 D1
0.042

20 1
UP
0.900

DOWN

D5
1.700

1.700

1.700
14.901

14.901
0.900
0.600 0.4750.600 0.421 0.098

D3
0.758

AE AE
CLIENT'S NAME:
0.300

0.300

0.300

0.300
0.707

0.707

W4
0.300

0.300

AF AF
1.907

D2 D2 D2
SSEMBATYA RICHARD
2.300
0.900

0.900

W4
0.800 0.800 0.852
0.300

0.300

AG AG
8.401

8.401
PROJECT'S TITLE:
0.900
1.978

D4
6.800

6.200
0.575

AH AH
3.993

3.993

3.993

RESIDENTIAL APPARTMENTS
2.000

2.000

W5 W5

LOCATION
3.053
0.300 0.425
0.725
0.300

0.300

0.300

AI AI
0.081 0.314 0.393 0.582 0.361 0.235 0.300
AQ WAKISO DISTRICT, GARUGA
0.800

0.800

0.919 3.653 0.900 3.000 0.664 0.900 3.000 0.900 3.000

0.300 0.300 0.300 0.300 0.300
0.919 3.053 4.577 4.577 4.577
0.300

DRAWING TYPE:
0.919 3.653 14.330

19.202
0.800 0.800
AJ AK WORKING DRAWINGS
S-07

AL AM AN AO AP 14.930

Roof Plan
4 DRAWINGS DESCRIPTION:
ELEVATIONS, ROOF PLAN,

GFSouth Elevation 1:100 SEPTIC TANK & SOAK PIT

1
DETAILS, SCHEDULES
S-06

1:100 FILE REF: SCALE:

DATE:
1:100
06/18/24
DWG NO.

0002 DRAWN: SSEBULIME ISAAC

A002
0755662133/ 0764390571

GSPublisherVersion 0.0.100.100
 GENERAL NOTES
- All work is to comply with National Building
AI AH AG AF AE AD AC AB AA Regulations and Local Authority
-All dimensions are to be checked on site and on
drawings, any discepancies to be reported to the
Achitect is put in hand
-only figured dimensions are to be taken
-The Drawing is the Property of the Architect
-Copyright is reserved by them and the drawing is

2.800
issued in condition that it has not been copied,
reproduced,retained or disclosed to any un
authorized person either wholy or in parts without
the consent of the archirect
-All materials and workmanships are to be the best

1.400
of their respective kinds. Building Materials used in
this contract are to conform to Local authority

0.185
specifications
-All level are to be checked on site and on drawings
AF AE AD AC AB AA

1.415
before work is put in hand, any discepancies to be
reported to the Architect
ROOF DETAILS
-All levels shown are finished floor levels
CEILING DETAILS Roof Pitch 30o
-All works are to be carried out with strict

1.400
G-26roofing iron sheets nailes
0.300 0.300 Mix 1:3 cem:sand mortar on 75x50mm rafters 100x50mm rafter 100x50mm accordance of the architect
on to expanded metal lathering
2.725 1.568 2.207 2.000 3.068 2.732 struts and ties -All foundation and reinforced concrete to be built in

0.185
on to 100x50 branderings on 150x75mm wall plate
at 600c/. strict accordance with the Structural Enginers

1.315
Drawings and details. Concrete suspended floors
and roof details are to be the structural engineers

0.100
Approval

0.800
-All water drainage are to be in accordance to the
AI AH AG specialist details
-Drainage systems are to comply with the national
building regulations, and the requirement of the
local authority.

3.000
SUBSTRUCTUAL DETAILS inspection eyes at all bents and juctions,
SECTION 1
1 25mm sand screed 1:3
on 100mm floor slab 1:3:6
-Rodding eye to comply with the requirements
of the local authority,
1:100 on DPM over 50mm blinding -Soil conditions to be inspected by soil Engineer.

0.200
on well compacted murram, 1000mm plinth
antitermite, depth determined -All works to be in accordance with the Local
on site to structural engineer's detail. authority Building /construction code.
-Size, components, materials & finishes alternatives

2.700
may be used, where approved by the Architect.
-Wall thicknesses 150mm for unfinished wall and
180 for finished wall.

0.200 0.200 0.100

0.300 0.064
NOTES

0.200
REV
DATE BY REVISION DETAILS

1.800

2.500
2.251
0.300
0.300

0.809
2.725 1.568 2.207 2.000 3.068 2.732

0.200 0.100
ARCHITECT'S STAMP &
SIGNATURE:

SECTION 1 SUBSTRUCTUAL DETAILS

2 25mm sand screed 1:3

1:100 on 100mm floor slab 1:3:6

on DPM over 50mm blinding CLIENT'S NAME:
on 150mm hard core
on well compacted murram, 1000mm plinth SSEMBATYA RICHARD
on 200*650 1:3:6 strip foundation
antitermite, depth determined
on site to structural engineer's detail.
PROJECT'S TITLE:
RESIDENTIAL APPARTMENTS

LOCATION
WAKISO DISTRICT, GARUGA

DRAWING TYPE:
WORKING DRAWINGS
DRAWINGS DESCRIPTION:
ELEVATIONS, ROOF PLAN,
SEPTIC TANK & SOAK PIT
DETAILS, SCHEDULES

FILE REF: SCALE: 1:100 DWG NO.

DATE: 06/18/24
0002 DRAWN: SSEBULIME ISAAC
A002
0755662133/ 0764390571

GSPublisherVersion 0.0.100.100