2.

7 PLANT LAYOUT
Plant layout refers to the physical arrangement of production facilities. It is the configuration of
departments, work centres and equipment in the conversion process. It is a floor plan of the
physical facilities, which are used in production.
According to Moore “Plant layout is a plan of an optimum arrangement of facilities including
personnel, operating equipment, storage space, material handling equipment and all other
supporting services along with the design of best structure to contain all these facilities”.

2.7.1 Objectives of Plant Layout

The primary goal of the plant layout is to maximise the profit by arrangement of all the plant
facilities to the best advantage of total manufacturing of the product.
The objectives of plant layout are:
1. Streamline the flow of materials through the plant.
2. Facilitate the manufacturing process.
3. Maintain high turnover of in-process inventory.
4. Minimise materials handling and cost.
5. Effective utilisation of men, equipment and space.
6. Make effective utilisation of cubic space.
7. Flexibility of manufacturing operations and arrangements.
8. Provide for employee convenience, safety and comfort.
9. Minimize investment in equipment.
10. Minimize overall production time.
11. Maintain flexibility of arrangement and operation.
12. Facilitate the organizational structure.

.7.2 Principles of Plant Layout

1. Principle of integration: A good layout is one that integrates men, materials, machines
and supporting services and others in order to get the optimum utilisation of resources and
maximum effectiveness.
2. Principle of minimum distance: This principle is concerned with the minimum travel
(or movement) of man and materials. The facilities should be arranged such that, the total
distance travelled by the men and materials should be minimum and as far as possible straight
line movement should be preferred.
3. Principle of cubic space utilisation: The good layout is one that utilise both horizontal
and vertical space. It is not only enough if only the floor space is utilised optimally but the third
dimension, i.e., the height is also to be utilised effectively.
4. Principle of flow: A good layout is one that makes the materials to move in forward
direction towards the completion stage, i.e., there should not be any backtracking.
5. Principle of maximum flexibility: The good layout is one that can be altered without
much cost and time, i.e., future requirements should be taken into account while designing the
present layout.
6. Principle of safety, security and satisfaction: A good layout is one that gives due
consideration to workers safety and satisfaction and safeguards the plant and machinery against
fire, theft, etc.
7. Principle of minimum handling: A good layout is one that reduces the material handling
to the minimum.
 2.8 CLASSIFICATION OF LAYOUT
Layouts can be classified into the following five categories:
1. Process layout
2. Product layout
3. Combination layout
4. Fixed position layout
5. Group layout

2.8.1 Process Layout

Process layout is recommended for batch production. All machines performing similar type of
operations are grouped at one location in the process layout e.g., all lathes, milling machines, etc.
are grouped in the shop will be clustered in like groups.
Thus, in process layout the arrangement of facilities are grouped together according to their
functions. A typical process layout is shown in Fig. 2.5. The flow paths of material through the
facilities from one functional area to another vary from product to product. Usually the paths are
long and there will be possibility of backtracking.
Process layout is normally used when the production volume is not sufficient to justify a
product layout. Typically, job shops employ process layouts due to the variety of products
manufactured and their low production volumes.

Fig. 2.5 Process layout

Advantages
 1. In process layout machines are better utilized and fewer machines are required.
2. Flexibility of equipment and personnel is possible in process layout.
3. Lower investment on account of comparatively less number of machines and lower cost
of general purpose machines.
4. Higher utilization of production facilities.
5. A high degree of flexibility with regards to work distribution to machineries and workers.
6. The diversity of tasks and variety of job makes the job challenging and interesting.
7. Supervisors will become highly knowledgeable about the functions under their department.
Limitations
1. Backtracking and long movements may occur in the handling of materials thus, reducing
material handling efficiency.
2. Material handling cannot be mechanised which adds to cost.
3. Process time is prolonged which reduce the inventory turnover and increases the in-
process inventory.
4. Lowered productivity due to number of set-ups.
5. Throughput (time gap between in and out in the process) time is longer.
6. Space and capital are tied up by work-in-process.

2.8.2 Product Layout

In this type of layout, machines and auxiliary services are located according to the processing
sequence of the product. If the volume of production of one or more products is large, the
facilities can be arranged to achieve efficient flow of materials and lower cost per unit. Special
purpose machines are used which perform the required function quickly and reliably.
The product layout is selected when the volume of production of a product is high such that
a separate production line to manufacture it can be justified. In a strict product layout, machines
are not shared by different products. Therefore, the production volume must be sufficient to
achieve satisfactory utilisation of the equipment. A typical product layout is shown in Fig. 2.6.

Fig. 2.6 Product layout

Advantages
1. The flow of product will be smooth and logical in flow lines.
2. In-process inventory is less.
3. Throughput time is less.
4. Minimum material handling cost.
5. Simplified production, planning and control systems are possible.
6. Less space is occupied by work transit and for temporary storage.
7. Reduced material handling cost due to mechanised handling systems and straight flow.
8. Perfect line balancing which eliminates bottlenecks and idle capacity.
9. Manufacturing cycle is short due to uninterrupted flow of materials.
10. Small amount of work-in-process inventory.
11. Unskilled workers can learn and manage the production.
Limitations
1. A breakdown of one machine in a product line may cause stoppages of machines in the
downstream of the line.
2. A change in product design may require major alterations in the layout.
3. The line output is decided by the bottleneck machine.
4. Comparatively high investment in equipments is required.
5. Lack of flexibility. A change in product may require the facility modification.

2.8.3 Combination Layout

A combination of process and product layouts combines the advantages of both types of layouts.
A combination layout is possible where an item is being made in different types and sizes. Here
machinery is arranged in a process layout but the process grouping is then arranged in a sequence
to manufacture various types and sizes of products. It is to be noted that the sequence of
operations remains same with the variety of products and sizes. Figure 2.7 shows a combination
type of layout for manufacturing different sized gears.

Fig. 2.7 Combination layout for making different types and sizes of gears

2.8.4 Fixed Position Layout

This is also called the project type of layout. In this type of layout, the material, or major
components remain in a fixed location and tools, machinery, men and other materials are brought
to this location. This type of layout is suitable when one or a few pieces of identical heavy
products are to be manufactured and when the assembly consists of large number of heavy parts,
the cost of transportation of these parts is very high.

Advantages
The major advantages of this type of layout are:
1. Helps in job enlargement and upgrades the skills of the operators.
2. The workers identify themselves with a product in which they take interest and pride in
doing the job.
3. Greater flexibility with this type of layout.
4. Layout capital investment is lower.
2.8.5 Group Layout (or Cellular Layout)
There is a trend now to bring an element of flexibility into manufacturing system as regards
to variation in batch sizes and sequence of operations. A grouping of equipment for performing
a sequence of operations on family of similar components or products has become all the
important.
Group technology (GT) is the analysis and comparisons of items to group them into families
with similar characteristics. GT can be used to develop a hybrid between pure process layout and
pure flow line (product) layout. This technique is very useful for companies that produce variety
of parts in small batches to enable them to take advantage and economics of flow line layout.
The application of group technology involves two basic steps; first step is to determine
component families or groups. The second step in applying group technology is to arrange the
plants equipment used to process a particular family of components. This represents small plants
within the plants. The group technology reduces production planning time for jobs. It reduces the
set-up time.
Thus group layout is a combination of the product layout and process layout. It combines
the advantages of both layout systems. If there are m-machines and n-components, in a group
layout (Group-Technology Layout), the m-machines and n-components will be divided into distinct
number of machine-component cells (group) such that all the components assigned to a cell are
almost processed within that cell itself. Here, the objective is to minimize the intercell movements.
The basic aim of a group technology layout is to identify families of components that require
similar of satisfying all the requirements of the machines are grouped into cells. Each cell is
capable of satisfying all the requirements of the component family assigned to it.
The layout design process considers mostly a single objective while designing layouts. In
process layout, the objective is to minimize the total cost of materials handling. Because of the
nature of the layout, the cost of equipments will be the minimum in this type of layout. In product
layout, the cost of materials handling will be at the absolute minimum. But the cost of equipments
would not be at the minimum if the equipments are not fully utilized.
In-group technology layout, the objective is to minimize the sum of the cost of transportation
and the cost of equipments. So, this is called as multi-objective layout. A typical process layout
is shown in Fig. 2.9.
 Fig. 2.9 Group layout or Cellular layout

Advantages of Group Technology Layout

Group Technology layout can increase—
1. Component standardization and rationalization.
2. Reliability of estimates.
3. Effective machine operation and productivity.
4. Customer service.
It can decrease the—
1. Paper work and overall production time.
2. Work-in-progress and work movement.
3. Overall cost.
Limitations of Group Technology Layout
This type of layout may not be feasible for all situations. If the product mix is completely
dissimilar, then we may not have meaningful cell formation.

2.3 FACTORS INFLUENCING PLANT LOCATION/FACILITY LOCATION

Facility location is the process of determining a geographic site for a firm’s operations. Managers
of both service and manufacturing organizations must weigh many factors when assessing the
desirability of a particular site, including proximity to customers and suppliers, labour costs, and
transportation costs.
Location conditions are complex and each comprises a different Characteristic of a tangible
(i.e. Freight rates, production costs) and non-tangible (i.e. reliability, Frequency security, quality)
nature.
Location conditions are hard to measure. Tangible cost based factors such as wages and
products costs can be quantified precisely into what makes locations better to compare. On the
other hand non-tangible features, which refer to such characteristics as reliability, availability and
security, can only be measured along an ordinal or even nominal scale. Other non-tangible
features like the percentage of employees that are unionized can be measured as well. To sum
this up non-tangible features are very important for business location decisions.
It is appropriate to divide the factors, which influence the plant location or facility location
on the basis of the nature of the organisation as
1. General locational factors, which include controllable and uncontrollable factors for all
type of organisations.
2. Specific locational factors specifically required for manufacturing and service
organisations.
Location factors can be further divided into two categories:
Dominant factors are those derived from competitive priorities (cost, quality, time, and
flexibility) and have a particularly strong impact on sales or costs. Secondary factors also are
important, but management may downplay or even ignore some of them if other factors are more
important.
2.3.1 General Locational Factors
Following are the general factors required for location of plant in case of all types of organisations.
CONTROLLABLE FACTORS
1. Proximity to markets
2. Supply of materials
3. Transportation facilities
4. Infrastructure availability
5. Labour and wages
Fig. 2.1 Factors influencing plant location.
 6. External economies
7. Capital
UNCONTROLLABLE FACTORS
8. Government policy
9. Climate conditions
10. Supporting industries and services
11. Community and labour attitudes
12. Community Infrastructure
CONTROLLABLE FACTORS
1. Proximity to markets: Every company is expected to serve its customers by providing
goods and services at the time needed and at reasonable price organizations may choose to locate
facilities close to the market or away from the market depending upon the product. When the
buyers for the product are concentrated, it is advisable to locate the facilities close to the market.
Locating nearer to the market is preferred if
• The products are delicate and susceptible to spoilage.
• After sales services are promptly required very often.
• Transportation cost is high and increase the cost significantly.
• Shelf life of the product is low.
Nearness to the market ensures a consistent supply of goods to customers and reduces the
cost of transportation.
2. Supply of raw material: It is essential for the organization to get raw material in right
qualities and time in order to have an uninterrupted production. This factor becomes very
important if the materials are perishable and cost of transportation is very high.
General guidelines suggested by Yaseen regarding effects of raw materials on plant location
are:
• When a single raw material is used without loss of weight, locate the plant at the raw
material source, at the market or at any point in between.
• When weight loosing raw material is demanded, locate the plant at the raw material
source.
• When raw material is universally available, locate close to the market area.
• If the raw materials are processed from variety of locations, the plant may be situated
so as to minimize total transportation costs.
Nearness to raw material is important in case of industries such as sugar, cement, jute and
cotton textiles.
3. Transportation facilities: Speedy transport facilities ensure timely supply of raw
materials to the company and finished goods to the customers. The transport facility is a
prerequisite for
the location of the plant. There are five basic modes of physical transportation, air, road, rail,
water and pipeline. Goods that are mainly intended for exports demand a location near to the port
or large airport. The choice of transport method and hence the location will depend on relative
costs, convenience, and suitability. Thus transportation cost to value added is one of the criteria
for plant location.
4. Infrastructure availability: The basic infrastructure facilities like power, water and
waste disposal, etc., become the prominent factors in deciding the location. Certain types of
industries are power hungry e.g., aluminum and steel and they should be located close to the
power station or location where uninterrupted power supply is assured throughout the year. The
non-availability of power may become a survival problem for such industries. Process industries
like paper, chemical, cement, etc., require continuous. Supply of water in large amount and good
quality, and mineral content of water becomes an important factor. A waste disposal facility for
process industries is an important factor, which influences the plant location.
5. Labour and wages: The problem of securing adequate number of labour and with skills
specific is a factor to be considered both at territorial as well as at community level during plant
location. Importing labour is usually costly and involve administrative problem. The history of
labour relations in a prospective community is to be studied. Prospective community is to be
studied. Productivity of labour is also an important factor to be considered. Prevailing wage
pattern, cost of living and industrial relation and bargaining power of the unions’ forms in
important considerations.
6. External economies of scale: External economies of scale can be described as
urbanization and locational economies of scale. It refers to advantages of a company by setting
up operations in a large city while the second one refers to the “settling down” among other
companies of related Industries. In the case of urbanization economies, firms derive from locating
in larger cities rather than in smaller ones in a search of having access to a large pool of labour,
transport facilities, and as well to increase their markets for selling their products and have
access to a much wider range of business services.
Location economies of scale in the manufacturing sector have evolved over time and have
mainly increased competition due to production facilities and lower production costs as a result
of lower transportation and logistical costs. This led to manufacturing districts where many
companies of related industries are located more or less in the same area. As large corporations
have realized that inventories and warehouses have become a major cost factor, they have tried
reducing inventory costs by launching “Just in Time” production system (the so called Kanban
System). This high efficient production system was one main factor in the Japanese car industry
for being so successful. Just in time ensures to get spare parts from suppliers within just a few
hours after ordering. To fulfill these criteria corporations have to be located in the same area
increasing their market and service for large corporations.
7. Capital: By looking at capital as a location condition, it is important to distinguish the
physiology of fixed capital in buildings and equipment from financial capital. Fixed capital costs
as building and construction costs vary from region to region. But on the other hand buildings can
also be rented and existing plants can be expanded. Financial capital is highly mobile and does
not very much influence decisions. For example, large Multinational Corporations such as Coca-
 Cola operate in many different countries and can raise capital where interest rates are lowest
and conditions are most suitable.
Capital becomes a main factor when it comes to venture capital. In that case young, fast growing
(or not) high tech firms are concerned which usually have not many fixed assets. These firms
particularly need access to financial capital and also skilled educated employees.
UNCONTROLLABLE FACTORS
8. Government policy: The policies of the state governments and local bodies concerning labour
laws, building codes, safety, etc., are the factors that demand attention.
In order to have a balanced regional growth of industries, both central and state governments in
our country offer the package of incentives to entrepreneurs in particular locations. The
incentive package may be in the form of exemption from a safes tax and excise duties for a
specific period, soft loan from financial institutions, subsidy in electricity charges and investment
subsidy. Some of these incentives may tempt to locate the plant to avail these facilities offered.
9. Climatic conditions: The geology of the area needs to be considered together with
climatic conditions (humidity, temperature). Climates greatly influence human efficiency and
behaviour. Some industries require specific climatic conditions e.g., textile mill will require humidity.
10. Supporting industries and services: Now a day the manufacturing organisation will
not make all the components and parts by itself and it subcontracts the work to vendors. So, the
source of supply of component parts will be the one of the factors that influences the location.
The various services like communications, banking services professional consultancy services and
other civil amenities services will play a vital role in selection of a location.
11. Community and labour attitudes: Community attitude towards their work and towards the
prospective industries can make or mar the industry. Community attitudes towards supporting trade
union activities are important criteria. Facility location in specific location is not desirable even though
all factors are favouring because of labour attitude towards management, which brings very often
the strikes and lockouts.
12. Community infrastructure and amenity: All manufacturing activities require access to a
community infrastructure, most notably economic overhead capital, such as roads, railways, port
facilities, power lines and service facilities and social overhead capital like schools, universities and
hospitals.
These factors are also needed to be considered by location decisions as infrastructure is
enormously expensive to build and for most manufacturing activities the existing stock of
infrastructure provides physical restrictions on location possibilities.