MILLING MACHINE OE-840VT

PRICE AND ACCESSORIES

$ 9000.00 + GST (9900.00 includes GST)

STANDARD ACCESSORIES:
• MT3 SPINDLE
• TABLE SIZE 210 x 840 mm
• VARIABLE SPEED
• 1.5 kw MOTOR
• DRO WITH 3 SCALES
• QUILL TRAVEL DRO
• RUBBER SHIELD ONTO REAR SADDLE
• ONE - SHOT OIL LUBRICATION
• CHIP TRAY
• RPM 50~3200
• HIGH-PRECISION SPINDLE BEARINGS
• CONTROL PANEL FOR/REV SWITCH, R.P.M. DISPLAY, E-STOP
• TAPPING FUNCTION
• DRAWBAR
• SPINDLE GUARD
• WORK LAMP
• METAL WIRE BRAIDED SPRING CLOTH SHEATH HOSE FOR
LUBRICATION DISTRIBUTION
• METRIC GRADUATIONS ON HAND WHEELS.
• 240 VOLT, SINGLE PHASE, AUSTRALIAN PLUG.
• STAND
SPECIFICATIONS OE-840VT

MODEL OE-840VT

DIGITAL READOUT OPTIONAL

TABLE SIZE (mm) 210 x 840

COLUMN TYPE Square

SPINDLE TAPER- VERTICAL MT3 (NT30 or MT4 optional

LONGITUDINAL TRAVEL (x axis mm) 530

CROSS TRAVEL ( y axis mm) 280

VERTICAL TRAVEL ( z axis mm) 520

TYPE OF SLIDES Dove Tail

RAM TRAVEL (mm) 120

SPINDLE TO TABLE 520

SPINDLE DIAMETER 44.5

SPINDLE TO COLUMN (max mm) 275

TILTING HEAD (left-right) ± 90°

DRILLING CAPACITY (mm) 30

END MILLING CAPACITY (mm) 20

FACE MILLING CAPACITY (mm) 80

POWERFEED-LONGITUDINAL (x axis) STANDARD (ALIGN)

POWERFEED- VERTICAL (Z axis) STANDARD (ALIGN)

TABLE T SLOT SIZE (inch/mm) 16mm (5/8")

WORK LOAD CAPCAITY (kg) 70

SPINDLE SPEEDS VERTICAL (no./rmp) 50~3200rpm

MOTOR POWER- VERTICAL SPINDLE (kw/hp) 1.5 kw

VOLTAGE / AMERAGE (v/amp) 240/10

NETT WEIGHT 520kg

GROSS WEIGHT (kg) 555kg

PACKAGING DIMENSIONS (LWH) 1030x775x1230

STAND PACKAGING DIMENSIONS (LWH) 885z695x870

 ALL PRICES INCLUDE GST
OE-840VT MILL COMES STANDARD WITH $9900.00
($9000.00 + GST)
DRILL CHUCKS & CLAMP KIT
PRECISION 13MM CHUCK WITH R8 ARBOUR $88.00
PRECISION 16MM CHUCK WITH R8 ARBOUR 110.00
58 PIECE CLAMP KIT $99.00
VISE
SWIVEL BASE MACHINE VISE 100MM $165.00
TAIWANESE HOMGE PRECISION ANGLE LOCK $385.00
MACHINE VISE WITH BASE 100MM
$198.00
ANGL SWIVEL BASE MACHINE VISE 125MM
TAIWANESE HOMGE PRECISION ANGLE LOCK $495.00
MACHINE VISE WITH SWIVEL BASE BASE 125MM
QKG100 TOOL MAKERS VISE $192.50
COLLET SETS
8 PIECE COLLET SET 0.008MM HIGH PRECISION, $181.50
INCLUDES MT3 COLLET CHUCK
18 PIECE ER 32 COLLET SET 0.008MM HIGH $184.80
PRECISION
MT3-ER32 COLLET CHUCK WITH C SPANNER $77.00
(If you need collet chuck for 18-piece collet set)
BORING SETS
MT3 10mm – 125mm boring head set with cutters. $187.00
All cutters come with indexable carbide inserts
(not cemented carbide). Includes MT3 arbor.
FACE MILL SETS
MILLING CUTTER SET –MT3 FACE MILL ARBOR, 63 $253.00
MM
90° FACE MILL, 12 MM AND 16 MM END MILLS
PLUS 10 INSERTS
MILLING CUTTER SET – INCLUDES MT3 FACE MILL $238.00
ARBOR, 80 MM
90° FACE MILL, 12 MM AND 16 MM END MILLS
PLUS 10 INSERTS
COOLANT
COOLANT PUMP KIT $330
5 LITERS OF COOLANT $66.00
1 LITER OF COOLANT $27.50

PARALLEL BAR SETS

14 pairs, Parallel bar set, 80mm L x 4mm wide. Various $132.00

heights 14, 16, 18, 20, 22, 24, 26, 28, 30, 32, 35, 40,
45, 50mm. comes in wooden case.
9 pairs, Parallel bar set, 100mm L x 4mm wide Various $110
heights 10,14,18,22,26,30,34,38,42
HSS END MILL SETS
5 X SLOT DRILLS, 6,10, 12, 16, 20mm + 5 X END $55.00
MILLS, 6,10, 12, 16, 20mm
11 X SLOT DRILLS, 3,4,5,6,8,10,12,14,16,18,20mm + $154.99
11 X END MILLS, 3,4,5,6,8,10,12,14,16,18,20mm
 CARBIDE ENDMILLS
CARBIDE ENDMILLS
1x4x50 HRC55 Coated Carbide Endmill 4 Flute $5.50
2x4x50 HRC55 Coated Carbide Endmill 4 Flute $5.50
3x4x50 HRC55 Coated Carbide Endmill 4 Flute $5.50
4x4x50 HRC55 Coated Carbide Endmill 4 Flute $5.50
4x4x100 HRC55 Coated Carbide Endmill 4 Flute $6.60
5x5x50 HRC55 Coated Carbide Endmill 4 Flute $7.70
6x6x50 HRC55 Coated Carbide Endmill 4 Flute $7.70
8x8x60 HRC55 Coated Carbide Endmill 4 Flute $13.20
1x4x50 HRC55 Coated Carbide Endmill 2 Flute $5.50
2x4x50 HRC55 Coated Carbide Endmill 2 Flute $5.50
3x4x50 HRC55 Coated Carbide Endmill 2 Flute $5.50
4x4x50 HRC55 Coated Carbide Endmill 2 Flute $5.50
4x4x100 HRC55 Coated Carbide Endmill 2 Flute $6.60
5x5x50 HRC55 Coated Carbide Endmill 2 Flute $7.70
6x6x50 HRC55 Coated Carbide Endmill 2 Flute $7.70
8x8x60 HRC55 Coated Carbide Endmill 2 Flute $13.20
10x10x75 HRC55 Coated Carbide Endmill 2 Flute $22.00
12x12x75 HRC55 Coated Carbide Endmill 2 Flute $33.00
CARBIDE ENDMILLS TO SUIT ALUMINIUM
1x4x50 HRC55 Uncoated Carbide Endmill 2 Flute $5.50
1.5x4x50 HRC55 Uncoated Carbide Endmill 2 Flute $5.50
2x4x50 HRC55 Uncoated Carbide Endmill 2 Flute $5.50
2.5x4x50 HRC55 Uncoated Carbide Endmill 2 Flute $5.50
3x3x50 HRC55 Uncoated Carbide Endmill 2 Flute $5.50
3x4x50 HRC55 Uncoated Carbide Endmill 2 Flute $5.50
4x4x50 HRC55 Uncoated Carbide Endmill 2 Flute $5.50
5x6x50 HRC55 Uncoated Carbide Endmill 2 Flute $7.70
6x6x50 HRC55 Uncoated Carbide Endmill 2 Flute $7.70
8x8x60 HRC55 Uncoated Carbide Endmill 2 Flute $13.20