0% found this document useful (0 votes)
18 views1 page

Checklist_Compressor

This document is a checklist for inspecting an air compressor, detailing various criteria that need to be evaluated for safety and functionality. Each item requires a 'Yes' or 'No' response, along with remarks if necessary. The checklist also includes sections for inspection and review signatures.

Uploaded by

Joanes Nyaoro
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
18 views1 page

Checklist_Compressor

This document is a checklist for inspecting an air compressor, detailing various criteria that need to be evaluated for safety and functionality. Each item requires a 'Yes' or 'No' response, along with remarks if necessary. The checklist also includes sections for inspection and review signatures.

Uploaded by

Joanes Nyaoro
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Checklist for Equipment Inspection

Project Name: Project Code:


Checklist No. ………… Date:
Make: Model:
IMS Hired Contractor

Equipment Name & Number: AIR COMPRESSOR


Note: Please write Yes or No in the given box and if some comments write in remarks column.
SN. Description Yes/No Remarks
1. Physical condition of compressor tank should be good #
and certified by TPI.
2. Piston should be in good condition. #
3. Motor should be in good and working condition. #
4. Inspection date and due date should be clearly #
marked.
5. Pressure gauge should be in working state and free #
from defects.
6. Safety valve should be calibrated at regular interval. #
7. Any other valve should be free from defects and in #
working condition.
8. Rotating part should be covered with fixed guard. #
9. All joints should be properly tighten. #
10. Compressor should be grounded as per IS 3043:1987. #
11. Power cable should be free from defects and #
connection taken through industrial plug.
12. Whip arrestor is in good condition. #

FIT PARTIALLY FIT UNFIT


Inspected By Reviewed By
Name: Name:
Signature with date: Signature with date:

You might also like