USER’S MANUAL

Note: Following the principles of sustainable development, we may modify

machines when necessary and will not notify again. It all depends on the actual product.
 Contents

1. About Your Treadmill .....................................................................................1

2. Safety Tips .......................................................................................................2

3. Installation Instructions ................................................................................... 4

4. Instruction For Use ...........................................................................................7

5. Routine Maintenance ......................................................................................10

 1. About Your Treadmill
Product name: Folding ElectricTreadmill Motorized Running Machine

Specifications and Parts List

Specifications
No. Parameters Description
1 Input Power Voltage 110V(50/60Hz)
2 Motor Power 1.5HP
3 Speed 0.5-7.5 MPH

Packing list
No. Name units Qty
1 Main Frame set 1
2 Accessory Bag set 1
3 Base Cover set 1
Accessory bag list
NO. Name QTY NO. Name QTY
1 Screw M8*22 2 6 Plum knob(M10*20) 1
2 Screw M8*20 2 7 Safety key 1
3 Inner hexagon wrench 5mm 1 8 Silicon oil 1
4 Inner hexagon wrench 6mm 1 9 User manual 1
5 Combination wrench 1 10 MP3 cable 1

1
 2. Safety Tips
Notice: Please read the instructions carefully before use.
 Do not use or store the treadmill outdoors, or in areas of high humidity or extreme temperature
changes. Never drop or insert any object into any opening.

 Please wear suitable clothes and sneakers before exercise. Do not exercise on the treadmill barefoot.

 High power plug must be grounded, electric outlet should have a dedicated circuit, do not share
with other electrical equipment.
 Keep children away from the machine to avoid accidents.
 Avoid too long time and overload operation, otherwise will cause motor and controller damaged, and
will accelerate the deterioration of bearing, running belt and running board. Should maintain machine
on a regular basis.

 Keep machine away from dust to avoid strong static.

 Please unplug the treadmill from the wall outlet when not in use.
 Please maintain good ventilation when running.
 Please clamp safety key on your clothing to make sure the machine stops at emergency
condition.

 If you feel not very well when using this machine, please stop and consult a doctor.
 Silicone oil must be kept away from children after use.
 If the power cord is damaged, please contact our qualified maintenance personnel for service rather
than disassemble it at your own discretion.

! WARNING

 Don't use the machine in the status of the shell break in or break off (the internal structure exposed)
or under the condition of welding-parts may fall off to avoid accident or possible injury.

 Don't jump up and down in the process of movement to avoid accidental falls resulting in possible
injuries.

 Don't keep machine in or near moist space such as the bathroom.

 Don’t place machine in direct sunlight, or high temperature places such as near a stove or a heating
appliance to avoid leakage or fire damage.

2
 Don't use the treadmill if the power cord is damaged or the power plug pin is loose to avoid
electric shock, short circuit or fire.

 Don't damage or bent by force or reverse the power cord. Don’t place heavy objects on machine,
don't clamp the power line.
----Otherwise will cause fire or get an electric shock.
 Don't use machine for more than 2 people at the same time, and don't get close to the machine
when it is in use.
---- Or it may be an accident or injury due to falls.
 People who can’t express their consciousness or can’t operate the machine by themselves
cannot use the treadmill.
----May occur accident or injury.
 Avoid drinking water or pouring water when operation.
---- May cause electric shock and fire. Forbidden!
 People who seldom do exercise shouldn't suddenly do intense exercise.
 After eating or when feel tired, do not use machine.
---- May lead damage to your health.
 This product is suitable for family use, does not apply to schools, gymnasium and so on. ----
There is the danger of injury.
 Don’t use when hard objects are in pants pockets.
----May cause accident or injury.
 Don’t use when the power plug is on the needle, garbage, or water.
----May cause electric shock, short circuit, or fire. Do not use with wet hands!
 When not in use, pull out the power plug from the socket.
----The dust and moisture can age the insulation, and result in leakage fire.
 This appliance is not intended for use by person (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the appliance by a person responsible for
their safety.

 Children should be supervised to ensure that they do not play with the appliance.

3
 ! Ground Protection System!
 This product must be grounded. If the machine is dysfunctional, grounding will provide a good
channel for electric current, in order to reduce the electric shock risk.
 This product is equipped with power plug with grounding conductor and plug. Completely
insert the plug to standard socket.

 Improper connection of the equipment's grounding conductor can result in the risk of electric
shock. Check with a qualified electrician or service person if you are in doubt as to
whether the outlet is properly grounded.

 Please use the socket which has the same shape with the grounding plug. Don’t use plug adapter.

3. Installation Instructions
When installing, simple fix all screws first, then tighten the screws when the installation of
frame is done.
NO. Name QTY

1 Complete Machine 1PC

2 6mm inner hexagon wrench 1PC

3 5mm inner hexagon wrench 1PC

Combination wrench
4 1PC

Safety key 1PC

5

Silicon oil 1PC

6

MP3 cable 1PC

7

4PCS
8 Screw M8*22

Screw M8*20 2PCS

9

10 Plum knob(M10*20) 1PC

11 User’s manual 1PC

4
1. Place the machine flat on the ground. Lift the columns and console upright in the direction
shown by the arrows in the picture below.

2. Use 5mm hexagon wrench and provided screws(M8*22) to secure the treadmill base (use one
M8*22 screw for each side). Then screw in the plum knob(M10*20) provided in the accessory bag.

M8*22

Plum knob
M8*22

3.Hold the left and right columns upright, then using a 6mm hexagon wrench, screw in the M8*20
screws to secure the console frame to the upright columns. Be sure to tighten any screws installed in
previous steps. Be careful not to pinch the cable that goes through the upright columns.

M8*20

4.Use the combination wrench to remove the two preinstalled screws M5*14(one on each side).
Then screw in to secure the side covers onto the upright column.

M5*14
5
5.Put the safety key on the yellow circle on the console (as shown below). Press the start button to
turn on the treadmill. (Notice: The treadmill only starts when the safety key is attached to the yellow
circle on the console.)

The safety key is in red

color. Please find it in the
accessory bag.

NOTE: after you have finished putting the treadmill together, make sure that all screws are
installed in their appropriate place according to the previous steps. Please be sure all parts are
properly locked in and secured by screws before plugging in electricity.

Incline Adjustment Instruction

Picture: 1 Picture: 2 Picture: 3

Folding Instructions
Folding: When the treadmill is not in use, you can lift the running deck and then twist the knob to
lock it in an upright position, as shown in the picture below.

Picture A: Fold the treadmill Picture B: Unfold the treadmill

6
Unfolding: To lower the running deck, please hold the running deck while removing the plum
knob. When the plum knob is fully removed, please lower the running deck slowly. Put the
running deck on the floor, then install the plum knob back(Picture B). Please keep children away
from treadmill to avoid injuries.

4. Instruction For Use

How to Use the Treadmill

1. Insert the power plug into a proper outlet and turn on the red switch located at the base of the
treadmill(1). When the light is on, you will hear a beep sound and the treadmill display screen will
light up.

1
2. Please keep the safety key away from children when the treadmill is not in use. Please put the
silicon oil bottle in a place where children cannot reach. If the silicon oil gets into the eyes or is
ingested, please flush with running water and consult a doctor immediately.
3. Safety key Introduction
The treadmill can only start when the safety key is put on the yellow circle on the treadmill console.
Clip the safety key onto your clothes when using the treadmill to prevent accidents. Put the safety
key back on the yellow circle when the treadmill is not in use.

1. Console Basics
Keyboard Instructions

1. Start/Pause Button & Stop Button：

When the power is on, press the start button and the screen will display “0.5 MPH”, and the
treadmill will start. When you are running on the treadmill and press pause button, the treadmill will
stop while the data on the screen will not be cleared. Pressing start button again will re-start
the treadmill and the data keeps accumulating based on previous values. When you are running on
the treadmill, press the stop button, all of the data on the screen will be cleared and the
treadmill will gradually come to a complete stop. Quick buttons located on the handle grips can
also be used to start or stop the treadmill.

2. Program Button
When the treadmill is in standby mode, pressing the program key multiple times can cycle the
options from manual mode to different automatic programs (P1-P12). The default speed while using
manual mode is 0.5 MPH, the highest speed is 7.5 MPH.

7
3. Mode Button
When the treadmill is in standby mode, press the mode key to cycle through 3 different ways to
countdown your running: time, distance and calories.
H-1: Time Countdown Mode. The default countdown time is 15 minutes. The time value can be
set from 5:00-99:00
H-2: Distance Countdown Mode. The default distance is 1 mile. The distance value can be set
from 1-99 miles.
H-3: Calorie Countdown Mode. The default countdown starting point calorie value is 50
calories. The starting countdown calorie value can be set from 10-999 calories.

4. Speed ± Button
Use these buttons to adjust the speed of the treadmill in 0.1 mile increments. Press the ‘+’ key to
increase the speed by 0.1mile and ‘-’ to decrease the speed by 0.1mile. You can also adjust the speed
using the Speed Shortcut Buttons on the handle grips.

5.Volume ± Button
When connected to your mobile phone, press the ‘+’ to turn the volume up and press the ‘-’ to turn
the volume down.

6.AUX function
Connect your phone to the treadmill with the MP3 cable in the accessory bag. Play a song on your
phone, and you will hear the music coming through the audio speaker built in the treadmill.

Readout Display
1. Speed
The speed you are traveling in miles per hour.
2. Time
The workout time elapsed when the treadmill is on manual mode, or the workout time
remaining when the treadmill is on an automatic mode or a program.
3. Distance
Total distance traveled in miles since the beginning of the workout. A countdown of a
set distance displays when the treadmill is in automatic mode.
4. Calorie
Estimated calories burned is calculated by using a widely accepted equation, using body
weight and distance coverred.
5. Heart Rate
The measured heart rate when you place your hands on the heart rate monitors.

Treadmill Automatic Programs

The treadmill has pre-set programs installed. Each program is divided into 10 segments while you
are running. The time spent running during reach segment throughout the duration of the program is
evenly distributed. Users can adjust the overall duration of a segment by pressing the speed buttons.

8
 Time
Programs Set time / 10 = running time of each period

1 2 3 4 5 6 7 8 9 10
P1 SPEED 1.2 2.4 1.8 2.4 1.8 3.1 2.4 1.2 3.1 1.8
P2 SPEED 1.2 3.1 2.4 3.7 2.4 3.7 2.4 1.2 2.4 1.2
P3 SPEED 1.2 3.1 2.4 3.1 2.4 3.1 2.4 1.2 1.8 1.2
P4 SPEED 1.8 3.7 4.3 3.1 4.9 3.1 5.5 3.7 2.4 1.8
P5 SPEED 1.8 3.7 4.9 3.1 4.9 3.7 4.3 3.7 2.4 1.8
P6 SPEED 1.2 4.9 3.7 2.4 3.1 5.5 4.3 3.1 2.4 1.8
P7 SPEED 1.2 3.7 4.3 2.4 2.4 4.3 2.4 1.2 2.4 1.2
P8 SPEED 1.2 2.4 3.7 4.9 4.3 4.9 3.7 1.2 1.8 1.2
P9 SPEED 1.2 2.4 3.1 3.1 3.7 3.1 3.7 1.8 1.8 1.2
P10 SPEED 1.2 1.8 3.1 1.8 1.8 3.1 1.8 3.7 1.8 1.8
P11 SPEED 1.8 3.1 4.9 4.9 5.1 3.1 4.3 3.7 1.8 1.2
P12 SPEED 1.2 3.1 3.1 2.4 2.4 3.7 2.4 1.2 1.8 2.4

Troubleshooting
Error Code Description Solutions
Disrupted Electronic
Connection: The electronic connection between the console and lower
When turned on, controller is blocked. Check the wire that connects the console
the connection
E1 between the lower
to the lower controller, make sure the wire base is fully
plugged in. Replace the cable if it’s broken.
controller and the
console is abnormal.

*This is most likely a bad motor cable connection. Check to

make sure the cable is properly connected.
E2 No Motor Signal *If this doesn't resolve the issue, the motor might be damaged.
Check to see if it has visible damage or a burnt smell. If yes,
replace the motor.

Electric Current *Overloading the treadmill machine system through

prolonged use can lead to excessive electric current and the
Overload Prevention:
When the treadmill treadmill will stop for your safety.
is running, *A part might be stuck causing the motor to stop, adjust the
treadmill and restart it.
the controller
E5 detects the electric *The motor may need to be replaced, check if there is a liquid or
current is over burnt smell while the motor is running. If yes, replace it.
6A(unit to measure *The treadmill monitor may need to be replaced, check if it
electricity) for more has a burnt smel. If yes, replace the monitor.
than 3 seconds. *The power supply voltage may need to be changed, check the
power supply voltage if it does not match specifications adjust to
the correct voltage and test the treadmill again.

9
 Explosion Prevention: *The power supply voltage may be low. Check if the
power supply voltage is 50% lower than the normal voltage of
An abnormal
110V, if it is, adjust it back to 110V and test the treadmill again.
voltage level or
E6 motor issue has *The controller may need to be replaced. Check if the controller
caused the motor to has a burnt smell, if yes, replace the controller.
not work properly
*The motor cable or wire may need to be reconnected. Check
to see whether the motor cable and wire are connected.
Reconnect if one or both are not properly connected.

E7 No safety key Put the safety key back on the yellow circle on the console.

5. Routine Maintenance
Warning: Before cleaning or doing product maintenance, please ensure the treadmill power plug
is pulled out of the electric socket.
Cleaning: Thoroughly cleaning your treadmill will extend its usage life.
Remove dust periodically in order to keep the parts clean. Be sure to clean both sides of running
belt, this will reduce the accumulation of dust and dirt. Treadmill belts must be cleaned with a damp
soapy cloth. Do not use a dripping wet cloth. Please be sure to not wet the electrical components of
the treadmill including underneath the running belt to keep everything dry and functional. Please
clean the motor at least once a year.

Running Belt Lubricant

This electric treadmill’s running board and running belt have already been lubricated in the
manufacturing process. Friction between the running belt and running board heavily impacts how
long your treadmill will last and its performance, therefore regular application of the lubricant is
needed. Please check the board regularly to ensure it is properly lubricated. If the board’s surface is
damaged, please contact our customer service center. We recommend applying the lubricant
between the running belt and running board using the following schedule:

*Light user (uses treadmill less than 3 hours a week): Apply lubrication once a month
*Heavy user (uses treadmill more than 7 hours a week): Apply lubrication twice a month, at
the beginning of the month and halfway through the month.
1. For safety measures and to extend the life of your treadmill, it is recommended that if you use the
treadmill for 2 hours or more non-stop, to turn off the machine and let it rest for 10 minutes before
using again.
2. If the treadmill belt is too loose, you will experience skidding while running. If the belt is too
tight, it may reduce motor performance and increase friction between the roller and running belt
impacting your running experience. You can lift two sides of the running belt for 50-75mm when
the tightness is appropriate.

Running Belt Adjustment

In order to use your treadmill properly so it can function well, it is necessary for you to adjust the
running belt into the best position.

10
How to align the running belt
 Put the treadmill flat on the ground
 Make the treadmill run at a speed of about 3-5 MPH
 If the running belt is closer to the right, rotate the right adjusting bolt with a ½ turn
clockwise, then rotate the left adjusting bolt with a ½ turn counter-clockwise (Picture B)
 If the running belt is closer to the left, rotate the left adjusting bolt with a ½ turn clockwise,
then rotate the right adjusting bolt with a ½ turn counter-clockwise (Picture A).

Picture A Picture B

Applying the treadmill silicone oil

Step 1: Lift the running belt slightly
Step 2: Open the silicone oil bottle, squeeze the silicone oil on the sides of the running board, as
show in the following picture:

11