https://displaycalibrations.com/files/CalMAN_MobileForge_Quick_Start_Guide.

pdf

Setup Guide
SpectraCal MobileForge
Pattern Generator App

Rev. 1.7
 CalMAN Setup Guide: SpectraCal MobileForge

Introduction
MobileForge is a free pattern generator app for iOS, Android™, and Fire TV
devices. MobileForge generates accurate test patterns automatically on your
mobile device, controlled by CalMAN™ display calibration software.
MobileForge provides free, accurate test patterns to those using CalMAN
software for display measurement and calibration.

MobileForge enables accurate, reliable screen measurements to test how

accurately your mobile device displays photos, videos and other digital
content. Use MobileForge with CalMAN ColorMatch, SpectraCal’s free testing
and analysis software, to test your tablet or smartphone’s conformance to
industry standards, with over a hundred different X-Rite/Pantone
ColorChecker test colors, representative of naturally occurring colors such
as foliage and skin tones.

The MobileForge test patterns can also be controlled by CalMAN to test or

calibrate the HDMI input of an external TV or video monitor. When
MobileForge is installed on a Fire TV device or on an iOS or Android™ device
with HDMI output (either directly, through a plug adapter, or by screen
mirroring to a streaming media device such as Apple TV or Chromecast), the
MobileForge test patterns can be routed to a display’s HDMI input.

Note: For external screen patterns, SpectraCal currently recommends using

MobileForge with an Amazon Fire TV device or with an iOS mobile device mirrored
to an Apple TV.

CalMAN Supported Software

 CalMAN ColorMatch (free)

 CalMAN Home Enthusiast
 CalMAN Studio
 CalMAN Video Pro
 CalMAN Ultimate

CalMAN Required Software Version

 Version 5.4.2 or newer for full range PC levels (0-255) (mobile device
screen patterns)
 Version 5.5.0 or newer for SMPTE video levels (16-235) (external video
screen patterns)

2
 CalMAN Setup Guide: SpectraCal MobileForge

iOS Device Required Version

 Version 7.0 or newer*

*See Device Limitations section, at the end of this document.

Android Device Required Version

 Version 4.0.3 or newer*

*See Device Limitations section, at the end of this document.

MobileForge Control Connection

 Wireless IP (Wi-Fi)

MobileForge Installation and Operation

Click one of the following links to jump to the desired section in this
document.

MobileForge Installation – iOS

MobileForge Installation - Fire TV

MobileForge Installation – Android

CalMAN Connection to MobileForge

Apple TV Connection

Fire TV Connection

Chromecast Connection

Measuring and Calibrating Screens

Optimize Pattern Delay Time

Device Limitations

3
 CalMAN Setup Guide: SpectraCal MobileForge

MobileForge Installation - iOS

Top

MobileForge for iOS

To set up MobileForge to automatically produce test patterns on an iOS
mobile device:

1. In the App Store, search for “MobileForge.”

2. On the MobileForge for CalMAN app, select Get and Install the app.
3. Tap the new MobileForge icon on the mobile device menu screen to open
the app.
4. The MobileForge screen (Figure 1) will say “Waiting to connect to
CalMAN…” and will display the mobile device IP address.
5. To connect CalMAN to control the MobileForge Pattern Generator, go to
the CalMAN Connection to MobileForge section, on page 7 below.

Figure 1. MobileForge opening screen.

4
 CalMAN Setup Guide: SpectraCal MobileForge

MobileForge Installation - Fire TV

Top

MobileForge for Fire TV

To set up MobileForge to automatically produce test patterns from a Fire TV
box or Fire TV stick:

1. From the Fire TV Home screen, select Search, then type “MobileForge.”
2. Select and Install the MobileForge app.
3. From the main menu, select Apps, then select the new MobileForge icon
to open the app.
4. The MobileForge screen (Figure 1) will say “Waiting to connect to
CalMAN…” and will display the Fire TV IP address.
5. To connect CalMAN to control the MobileForge Pattern Generator, go to
the CalMAN Connection to MobileForge section, on page 7 below.

5
 CalMAN Setup Guide: SpectraCal MobileForge

MobileForge Installation - Android

Top

MobileForge for Android

To set up MobileForge to automatically produce test patterns on an Android
mobile device:

Note: Android device compatibility will vary depending on mobile device and
adapter.

1. In the Play Store, search for “MobileForge.”

2. Select and Install the MobileForge app.
3. On the Applications page, tap the new MobileForge icon to open the app.
4. The MobileForge screen (Figure 1) will say “Waiting to connect to
CalMAN…” and will display the mobile device IP address.
5. To connect CalMAN to control the MobileForge Pattern Generator, go to
the CalMAN Connection to MobileForge section, on page 7 below.

6
 CalMAN Setup Guide: SpectraCal MobileForge

CalMAN Connection to MobileForge

Top

To connect CalMAN to control the MobileForge Pattern Generator:

1. Connect the CalMAN computer to the same local network to which the
mobile device is connected. The first three sections of IP addresses on the
same local network will be the same (e.g. 192.168.10.113 and
192.168.10.105).
2. In CalMAN, on the Source Settings tab, under Find Source (Figure 2),
select “SpectraCal – MobileForge Pattern Generator (Ethernet @2150).”

Figure 2. CalMAN Find Source dialog.

3. Select the mobile device listing with the IP address that you noted on the
MobileForge opening screen (Figure 1). If there is no device listed with
that expected IP address, enter the expected MobileForge address in the
IP Address box.
4. Click Connect on the Find Source dialog.
5. On the Source Settings tab (Figure 3), under Window Size, select the
desired test pattern window type and size.

7
 CalMAN Setup Guide: SpectraCal MobileForge

Figure 3. CalMAN Source Settings tab.

8
 CalMAN Setup Guide: SpectraCal MobileForge

Apple TV Connection
Top

The 2nd generation or later Apple TV can be used to accurately transfer

grayscale and color test patterns from an Apple mobile device to a TV to be
calibrated, using AirPlay Mirroring.

Note: The AppleTV must be set to YCbCr mode before screen-sharing patterns from
MobileForge. On the Apple TV menu, go to Settings > Audio & Video > HDMI
Output > YCbCr.

To connect your iOS device to an Apple TV:

1. Connect your iOS device to the same Wi-Fi network as your Apple TV to
which you want to AirPlay Mirror.
2. On your iOS device, swipe up from the bottom of the screen to open
Control Center.
3. In Control Center, tap AirPlay Mirroring, then select your Apple TV from
the list.
The diagram in Figure 4, below, illustrates the device connections between
the CalMAN computer and the display to be calibrated.

Figure 4. Device configuration for mirroring test patterns from MobileForge

running on an iOS mobile device to an Apple TV device.

9
 CalMAN Setup Guide: SpectraCal MobileForge

Fire TV Connection
Top

With MobileForge installed on a Fire TV Stick or on a Fire TV Box (see

MobileForge Installation - Fire TV), the MobileForge test patterns can be fed
directly to an HDMI input of a TV or monitor.

The diagram in Figure 5, below, illustrates the device connections between

the CalMAN computer and the display to be calibrated.

Figure 5. Device configuration for displaying test patterns from MobileForge

running on a Fire TV device.

10
 CalMAN Setup Guide: SpectraCal MobileForge

Chromecast Connection
Top

You can cast your Android screen (running Android 4.4.2 or higher) to a
Google Chromecast, Chromecast Ultra, or TV with built-in Chromecast.

Caution: Casting test patterns from an Android screen to a Chromecast converts

grayscale levels accurately, but does not provide bit-accurate color patterns.

Most other Android devices, such as the Nexus player and HDMI adapters seem to
convert all test patterns accurately.

1. Connect the Chromecast device to the desired TV HDMI input.

1. Turn off "Power Saving Mode" on your Android device. Power Saving
Mode can limit the processing power of your device, which might affect
the performance of the Cast Screen feature.
2. Connect your Android device to the same Wi-Fi network as your
Chromecast or TV with built-in Chromecast.
3. Open the Google Home app.
4. In the top-left corner of the app's Home screen, tap Menu > Cast Screen /
audio > Cast Screen / audio.
5. Select your Chromecast or TV with built-in Chromecast.
The diagram in Figure 6, below, illustrates the device connections between
the CalMAN computer and the display to be calibrated.

Figure 6. Device configuration for mirroring test patterns from MobileForge

running on an Android mobile device to a Chromecast device or to a TV with built-
in Chromecast.

11
 CalMAN Setup Guide: SpectraCal MobileForge

Measuring and Calibrating Screens

Top

Measure a Mobile Device Screen

When the MobileForge test patterns are being used to measure the screen of
the mobile device on which MobileForge is installed:

1. Select “PC (0-255)” under CalMAN Settings > Workflow Basic Options >
Luminance Levels.
2. Uncheck the “Expand Video To PC Levels” option on the CalMAN Source
Settings tab.

Measure/Calibrate an External TV or Monitor Screen

When the MobileForge test patterns are routed through an HDMI output to
test or calibrate the HDMI input of an external TV or video monitor:

1. Select “Video (16-235)” under CalMAN Settings > Workflow Basic Options
> Luminance Levels.
2. Check the “Expand Video To PC Levels” option on the CalMAN Source
Settings tab.
Note: When using the Apple TV to mirror MobileForge test patterns to an external
TV or video monitor, set the Apple TV’s HDMI output to YCbCr. On your Apple TV
menu, go to Settings > Audio & Video > HDMI Output > YCbCr

12
 CalMAN Setup Guide: SpectraCal MobileForge

Optimize Pattern Delay Time

Top

Different mobile devices may have different delay times when switching test
patterns. To optimize CalMAN to take a measurement as quickly as possible
after switching to a new test pattern, without taking a measurement before
the test pattern image is stable, do the following:

1. Connect CalMAN to control the MobileForge Pattern Generator, as

outlined above.
2. Position your color meter to make screen measurements at the center of
the test pattern.
3. On the CalMAN Source Settings tab, click the Optimize button, toward the
bottom of the panel.
4. Wait for the Optimize process to complete and display an updated
pattern Delay time.

13
 CalMAN Setup Guide: SpectraCal MobileForge

Device Limitations
Top

Apple iPhone 4
The iPhone 4, when used with a video output adapter, supports only video
output, not still images. While the iPhone 4 does support MobileForge for
measuring the iPhone 4 screen, it does not produce test patterns to an
external video screen.

The iPhone 4s, however, does output still images through a video output
adapter and does support MobileForge for measuring or calibrating an
external video screen.

Apple Lightning to HDMI Adapter

The Apple lightning to HDMI adapter converts grayscale levels accurately, but
does not provide bit-accurate colors.

Samsung Galaxy S6/S6 Edge

The Galaxy S6/Edge has no provision for a physical video output connection.
The S6 does support streaming to a Google Chromecast device to stream
MobileForge test patterns to an HDMI input on an external video screen.

Smart TV Streaming Apps

When MobileForge test patterns are streamed directly into the streaming
app on a smart TV, the test patterns bypass the display’s physical video
inputs. Thus, the display’s HDMI video inputs cannot be calibrated with
MobileForge test patterns sent directly to the smart TV’s built-in streaming
app.

Also, the smart TV may or may not have calibration controls for the display’s
streaming app input.

14
 CalMAN Setup Guide: SpectraCal MobileForge

About / Contact
About Portrait Displays
Portrait Displays, Inc., since 1993, is a leading application software provider
(ASP) for PC, smartphone, and tablet displays. The Portrait Displays team now
includes SpectraCal, the world’s leading provider of video display calibration
software. The combined companies offer value-added, feature-rich solutions
to both OEM display manufacturers and end users seeking improved accuracy
and manageability of their displays.

Portrait Displays, an Intel Capital Portfolio company, is a private corporation

with headquarters in Pleasanton, California, USA with representatives in
Europe, Taiwan, China, Japan, and Korea.

Contact Us

Submit a Technical Support Request:

http://calman.spectracal.com/techsupport.html

spectracal.com
[email protected]
+1-925-227-2700

Portrait Displays, Inc.

6663 Owens Drive
Pleasanton, CA 94588 USA

portrait.com

15