PRODUCTS- 230V

HIGH FREQUENCY SOLAR INVERTER

MODEL PV18-2012 PREM PV18-3624 PREM PV18-4024 PREM PV18-6248 PREM

PV1800 PREM Series Nominal Battery System Voltage 12VDC 24VDC 24VDC 48VDC

INVERTER OUTPUT
2-6.2KW | Dual output | WiFi | Bluetooth Rated Power (Main+Second Load) 2000VA/2000W 3600VA/3600W 4000VA/4000W 6200VA/6200W

PV1800 PREM is a multi-function inverter/charger, combining functions of Battery Mode (Main+Second Load) 2000VA/1600W 3000VA/3000W 3500VA/3500W 5500VA/5500W
inverter, MPPT solar charger and battery charger to offer uninterruptible power
support in portable size. PV1800 PREM Series can run without battery. Surge Power 3200W 6000W 7000W 11000W
The Maximum PV array open circuit voltage can reach 400V/450V. which Can
Waveform Pure sine wave
help customers make full use of solar energy.
AC Voltage Regulation (Batt.Mode) 230VAC±5%(Setting)

Inverter Efficiency(Peak) 90~93%

Transfer Time 10ms (UPS / VDE4105) / 20ms (APL)

■ Pure sine wave output
■ Smart LCD setting (Working modes, Charge Current, Charge Voltage, etc). AC INPUT

■ Built-in MPPT solar charge controller Voltage 230VAC±5%

■ Combining solar system, AC utility, and battery power source to supply
continuous power Selectable Voltage Range 170~280VAC(UPS) / 90~280VAC(APL) / 184~253VAC(VED4105)

■ Overload, short circuit and Deep discharge protection Frequency Range 50Hz / 60Hz(Auto sensing)
■ Cold start function
BATTERY
■ Support USB, RS485, CAN monitoring function
■ WIFI remote monitoring (Built in wifi and bluetooth module and antenna) Normal voltage 12VDC 24VDC 24VDC 48VDC

■ PV/ AC activation function Floating Charge Voltage 13.7VDC 27.4VDC 27.4VDC 54.8VDC
■ BMS communication function (CAN Port)
Overcharge Protection 15VDC 30VDC 30VDC 60VDC
■ Dual output for smart load management
SOLAR CHARGER & AC CHARGER

Back panel description Maximum PV Array Open Circuit Voltage 400VDC 400VDC 450VDC 450VDC

Maximum PV Input Current 16A 18A 18A 28A

2KW

1 2 3 4 8 9 10 11
Charging Algorithm 3-Step (Flooded Battery, AGM / GEL / LEAD Battery), 4-Step (Li)

1. AC Input Maximum PV Array Power 2000W 4000W 4000W 6000W

2. Main Load
PV Array MPPT Voltage Range(Typ.) 30~320VDC 60~360VDC
3. Second Load
4. PV Input Maximum Solar Charge Current 80A 100A 100A 100A
7 6 5
5. ON/OFF Switch
Maximum AC Charge Current 80A 60A 60A 100A
6. DC Input
3.6-6.2KW
7. Ground Maximum Charge Current 80A 100A 100A 100A
8. WiFi and Bluetooth antenna
1 2 3 4 8 9 10 11

MECHANICAL SPECIFICATIONS
9. USB Port
10. RS-485/CAN Communication port Machine Dimension (W*H*D)(mm) 290*367*111 318*454*122.5
11. Dry contact
Package Dimension (W*H*D)(mm) 446*394*187 544.5*410*200
7 6 5
N.W (kg) 6 7.8 8.0 9.0

Solar system connection G.W (kg) 7.2 9.3 9.5 10.2

OTHER

PV input Humidity 5% to 95% Relative humidity (Non-condensing)

Solar Panel Fridge Lighting Fans Operating Temperature -10°C~50°C

Main Load Storage Temperature -15°C~60°C

AC Input

Communication Interface USB/WIFI/Bluetooth/RS-485/CAN

Utility
BAT input
Warranty 2years
Second Load

Anti-dust Kit none yes yes yes

TV Air conditioner Washing machine

Battery Inverter CERTIFICATION & STANDARDS

Generator

Built-in WiFi Bluetooth CE-EMC+LVD (EN6100-6-3, EN6100-6-1+EN IEC62109-1, EN IEC62109-2)

*The technical specifications of this document are subject to change without any notice