CSE500

EXAMS
1- What is the key benefit of working in a network?
A. Sharing Information and resources
B. It's cheap
C. Security
2- What are the three main types of topology?
A. LAN, WAN and MAN
B. Bus, Ring and Star
C. LAN, Ring and Star
3- What does LAN stand for?
A. Logical Analogue Network
B. Local Access Network
C. Local Area Network
4- What does LAN stand for?
A. Logical Analogue Network
B. Local Access Network
C. Local Area Network
5- A connection that provides a dedicated link between two
devices is called:
a) Point-to-Point
b) Multipoint
c) Topology
d) Protocol
6- The geometric arrangement of devices on the network is
called:
a) Topology
b) Protocols
c) Network
d) Medium
7- A topology in which every node has a dedicated point to point
link to all nodes (devices) within the network is called:
a) Mesh
b) Star
c) Bus
d) Ring
8- Which of the following topology uses a central hub?
a) Star
b) Bus
c) Mesh
d) Ring
9- A communication pathway that sends data from one point to
another is called:
a) Node
b) Link
c) Medium
d) Topology
10- The star topology is less expensive than
a) Ring
b) Mesh
c) Bus
d) Hybrid
11- OSI Reference model stands for:
a) Online Systems interconnection
b) Open Systems Internet
c) Open Systems Interconnection
d) Online Systems Interconnection
12- The OSI model is composed of how many layers?
a) 5
b) 6
c) 7
d) 8
13- Which layer is not present in the OSI reference model?
a) Physical Layer
b) Application Layer
c) Transport layer
d) Internet layer
14- Each IP packet must contain:
a) Only Source address
b) Only Destination address
c) Source and Destination address
d) Source or Destination address
15- What is a standalone computer?
a) A computer that is not connected to a network
b) A computer that is being used as a server
c) A computer that does not have any peripherals attached to it
d) A computer that is used by only one person
16- Hub is a
a) Broadcast device
b) Unicast device
c) Multicast device
d) None of the above
17- Switch is a
a) Broadcast device
b) Unicast device
c) Multicast device
d) None of the above
18- The device that can operate in place of a hub is a:
a) Switch
b) Bridge
c) Router
d) Gateway
19- A device that forwards data packet from one network to
another is called a
a) Bridge
b) Router
c) Hub
d) Gateway
20- MAC address is of
a) 24 bits
b) 36 bits
c) 42 bits
d) 48 bits
1- The physical layer is concerned with
a) bit-by-bit delivery
b) process to process delivery
c) application to application delivery
d) port to port delivery
2- Which transmission media provides the highest transmission
speed in a network?
a) coaxial cable
b) twisted pair cable
c) optical fiber
d) electrical cable
3- The physical layer provides
a) mechanical specifications of electrical connectors and cables
b) electrical specification of transmission line signal level
c) specification for IR over optical fiber
d) all of the mentioned
4- The physical layer is responsible for
a) line coding
b) channel coding
c) modulation
d) all of the mentioned
5- The physical layer translates logical communication requests
from the ………... into hardware specific operations
a) data link layer
b) network layer
c) transport layer
d) application layer
6- Wireless transmission of signals can be done via
a) radio waves
b) microwaves
c) infrared
d) all of the mentioned
7- The data link layer takes the packets from ……. and
encapsulates them into frames for transmission.
a) network layer
b) physical layer
c) transport layer
d) application layer
8- Which sub-layer of the data link layer performs data link
functions that depend upon the type of medium?
a) logical link control sublayer
b) media access control sublayer
c) network interface control sublayer
d) error control sublayer
9- Which of this is not a wired media?
a) Fiber optical cable
b) Coaxial cable
c) Wireless LAN
d) Copper wire
10- UTP is commonly used in
a) DSL
b) FTTP
c) HTTP
d) None of the mentioned
11- Fiber optics possess following properties
a) Immune electromagnetic interference
b) Very less signal attenuation
c) Very hard to tap
d) All of the mentioned
12- MAC address is of
a) 24 bits
b) 36 bits
c) 42 bits
d) 48 bits
13- With respect to physical media, STP cables stands for
a) Shielded Twisted Pair Cable
b) Spanning Tree Protocol Cable
c) Static Transport Protocol Cable
d) Shielded Two Power Cable
14- What is the max length of the Shielded twisted pair cable?
a) 100 ft
b) 200 ft
c) 100 m
d) 200 m
15- Which connector does the STP cable use?
a) BNC
b) RJ-11
c) RJ-45
d) RJ-69
1- When a collision is detected in a network using CSMA/CD
a. The frame is immediately resent
b. A jam signal is sent by the station
c. The back-off value is set to 0
d. The back-off value is decremented
2- In Carrier Sense Multiple Access/Collision Detection
(CSMA/CD), the sending station must Detect
a) collision
b) signal
c) sense
d) station
3- For Carrier Sense Multiple Access/Collision Detection
(CSMA/CD), we need a restriction on the
a. collision size
b. signal size
c. frame size
d. station size
4- Which sublayer of the data link layer performs data link
functions that depend upon the type of medium?
a) logical link control sublayer
b) media access control sublayer
c) network interface control sublayer
d) error control sublayer
5- …….. in the data link layer separates a message from one
source to a destination, or from other messages going from
other sources to other destinations
a. Digitizing
b. Controlling
c. Framing
d. none of the above
6- …….. uses thick coaxial cable
a. 10Base5
b. 10Base2
c.10Base-T
d. 10Base-F
e. A. 10Base5
7- The Carrier Sense Multiple Access (CSMA) method was
developed to increase the
a. Collision
b. Performance
c. Transmission
d. Station
8- ……. uses thin coaxial cable
a. 10Base5
b. 10Base2
c. 10Base-T
d. 10Base-F
9- What is NIC? Select the best answer.
a. A network interface card (NIC) is a device that allows a
computer to communicate with another device.
b. A network interface card (NIC) is a central device that divides
a network connection among several devices.
c. A network interface card (NIC) is a networking device that
connects all of the devices on the network to transport data to
another device
10- TCP/IP model does not have layer but OSI model have
this layer.
a. A) presentation layer
b. B) application layer
C) both session layer and presentation layer
d. D) session layer
11- The packet of information at the application layer is
called:
a. a) Packet
b. b) Message
c) Segment
d. d) Frame
12- What is the full form of NIC?
a. Network ID card
b. b. Network interface card
c. c. National interface card
d. d. New interface card
13- In Carrier Sense Multiple Access (CSMA), if the station
senses the medium before trying to use it then the chance of
collision can be
a. Increased
b. Reduced
c. Highlighted
d. Both b and c
14- How many types of cables are there?
a. 5
b. 4
c. 3
d. 2
15- What is the full form of CSMA?
a. Carrier senses marginal access
b. Carrier system multiple access
c. Carrier sense multiple access
d. Carrier sense mostly access
16- The data link layer consists of how many sublayers?
a. 2
b. 3
c. 4
d. 5
17- OSI consists of how many layers?
a. 8
b. 6
c. 7
d. 5
1- The Carrier Sense Multiple Access/Collision Detection
(CSMA/CD) is used to avoid the
a. errors
b. multiple access
c. point to point access
d. collision
2- Carrier Sense Multiple Access (CSMA) is based on the
medium called:
a. Listen before talk
b. Listen before sending
c. Sense before transmit
d. Sense before Collision
3- ……. uses four twisted-pair cables that connect each
station to a common hub.
a. 10Base5
b. 10Base2
c. 10Base-T
d. 10Base-F
4- ……. uses fiber-optic cable
a. 10Base5
b. 10Base2
c. 10Base-T
d. 10Base-F
5- Fast Ethernet has a data rate of Mbps.
a. 10
b. 100
c. 1000
d. 10000
6- The most used LAN technology is
a. Standard
b. Fast Ethernet
c. Gigabit Ethernet
d. Ten-Gigabit Ethernet
7- …… uses two pairs of twisted-pair cable.
a. 100Base-TX
b. 100Base-FX
c. 100Base-T4
d. none of the above
8- All the modern laptops use ….. types of NIC.
a. Wireless NIC
b. Wired NIC
9- In Carrier Sense Multiple Access/Collision Detection
(CSMA/CD), to continue the transmission process we use
a. loop
b. station
c. signal
d. navigation
10- What is the size of MAC Address?
a. 16bits
b. 32bits
c. 48bits
d. 64-bits
11- …… uses two fiber-optic cables.
a. 100Base-TX
b. 100Base-FX
c. 100Base-T4
d. none of the above
12- …… uses four pairs of voice-grade, or higher,
twisted-pair cable.
a. 100Base-TX
b. 100Base-FX
c. 100Base-T4
d. none of the above
13- Gigabit Ethernet has a data rate of Mbps
a. 10
b. 100
C. 1000
d. 10000
14- Gigabit Ethernet access methods include mode.
a. half-duplex
b. full-duplex
c. both (a) and (b)
d. neither (a) nor (b)
15- Automatic repeat request error management
mechanism is provided by
a) logical link control sublayer
b) media access control sublayer
c) network interface control sublayer
d) application access control sublayer
 16- The lower sub layer of the data link layer is
responsible for
a. multiple access
b. point to point access
c. error detection
d. flow control
17- High speed Ethernet works on
a) coaxial cable
b) twisted pair cable
c) optical fiber
d) unshielded twisted pair cable
1- Which type of topology is best suited for large businesses
networks?
a. Ring
b. Local area
c. Hierarchical
d. Star
2- Which one is an email relating to protocol?
a) BOOTP
b) DHCP
c) SMTP
d) FTP
3- The router needs …….. address to forward the data
a) IP address
b) MAC address
c) Both a and b
d) None of the above
4- The bandwidth supported by the copper media ranges between
…..
a) 10Mbps-10Gbps
b) 10Mbps-100Gbps
c) 10Mbps-50Gbps
 d) None of the above
5- The copper cable uses …… signal
a) Electromagnetic
b) Light signal
c) Both a and b
d) None of the above
6- The traditional Ethernets speeds up to
a) 10 Mbps
b) 20 Mbps
c) 30 Mbps
d) 40 Mbps
7- The application layer in protocol data unit called as
a) Data
b) Segment
c) Packet
d) Frame
8- The switch needs ….. address to forward the data
a) IP address
b) MAC address
c) Both a and b
d) None of the above
9- The MAC addresses are of ….. bits
a) 8
b) 16
c) 32
d) 48
10- The IP addresses are of …… bits
a) 8
b) 16
c) 32
d) 48
11- What are the disadvantages of optical fiber?
a) Expensive over short distance
b) Requires highly skilled installers
c) Adding additional nodes is difficult
d) All of the above
12- What are the advantages of optical fiber?
a) It has greater capacity
b) Small size and lightweight
c) It has lower attenuation problem
d) All of the above
13- The IP addresses are represented in …… format
a) Binary
b) Decimal
c) Hexadecimal
d) None of the above
14- The MAC addresses are represented in ……. format
a) Binary
b) Decimal
c) Hexadecimal
d) None of the above
15- The fiber optic cables require a light source with
a) Injection laser diode
b) Light-emitting diode
c) Injection laser or light-emitting diode
d) None of the above
16- How many layers are there in TCP/IP models are there?
a) Four
b) Five
c) Three
d) Four
17- …….. Is used to regenerate the signal
a) HUB
b) Repeater
c) Bridge
d) None of the above
18- In an OSI model architecture, the packets will be created
in …….. layer
a) Physical layer
b) Datalink layer
c) Network layer
d) Transport layer
19- Which one is a type of one-to-one communication?
a) Unicast
b) Multicast
c) Broadcast
d) All of the above
20- The fast Ethernet speeds up to
a) 10 Mbps
b) 20 Mbps
c) 50 Mbps
d) 100 Mbps
21- The OSI model supports ……… service
a) Only connectionless
b) Only connection-oriented
c) Both a and b
d) None of the above
22- The design issues of the data link layer are
a) It provides services to the network layer
b) It does the operation like framing
c) It also checks the error control and flow control
d) All of the above
23- In which of the following switching methods, the message
is divided into small packets?
a. Message switching
b. Packet switching
c. Virtual switching
d. None of the these
1- Which type of topology is best suited for large businesses
networks?
a. Ring
b. Local area
c. Hierarchical
d. Star
2- In which of the following switching methods, the message
is divided into small packets?
a. Message switching
b. Packet switching
c. Virtual switching
d. None of the these
3- Which of the following layers does the HTTP protocol
work on?
a. Physical layer
b. Data-link layer
c. Application layer
d. None of the these
4- The correct order of corresponding OS1 layers is?
a. Presentation Session, Network, Physical, Transport, Data
link
b. Network, Physical, Data link, Application, Presentation
Session
c. Application, Presentation, Session, Transport, Network,
Data link
 d. Network, Presentation, Physical, Presentation Session,
Transport
5- Which of the following methods is used to broadcast two
packets on the medium at a time?
a. Collision
b. Synchronous
c. Asynchronous
d. None of the above
6- Which of the following switch methods creates a
dedicated physical connection between two more
computers?
a. Message switching
b. Packet switching
c. Circuit switching
d. None of the these
7- Which of the following protocols is the Transport Layer
protocol?
a. UDP
b. TCPP c.
c. IP
d. All of the these
8- Which network is suitable for a building?
a.WAN
b. LAN
C. MAN
d. PAN
9- What is the full form of OSI?
a) optical service implementation
b) open service Internet
c) open system interconnection
d) operating system interface
10- Which one of the following is not a function of
network layer?
a) IP Addressind
b) error control
c) routing
d) inter-networking
11- Which of this is not a network end user device?
a) Switch
b) PC
c) Smartphones
d) Servers
12- Which of the following devices is not a networking
device?
a. Hub
b. Switch
c. Bridge
d. None of the these
13- What is the full form of NIC?
a. Network ID card
b. Network interface card
c. National interface card
d. New interface card
14- Which of the following protocols are used in the
Application layer?
a. TCP
b. UDP
c. HTTP
d. ARP
15- The star topology is less expensive than
a. Ring
b. Mesh
c. Bus
 d. Hybrid
16- The protocol data unit (PDU) for the Data Link
Layer is
a. Segment
b. Packet
c. Message
d. Frame
17- Which layer's primary duty is to transmit individual
bits from one node to another?
a. Physical Layer
b. Data-Link Layer
c. Network Layer
d. Transport Layer
18- Which of the following protocols is used to assign an
IP address to a device on a network?
A) DNS
B) DHCP
C) NAT
D) FTP
19- …….. is used to regenerate the signal
a. HUB
b. Repeater
c. Bridge
d. None of the above
20- Which of the following is used to connect two LANs
together over a long distance?
A) Switch
B) Hub
C) Router
D) Bridge
21- Bridge is used in …… layer
a. Session layer
b. Data link layer
c. Application layer
d. Presentation layer
22- DNS is the abbreviation of
a. Dynamic Name System
b. Dynamic Network System
c. Domain Name System
d. Domain Network Service
23- Router operates in which layer of OSI Reference
Model?
A. Layer 1 (Physical Layer)
B. Layer 3 (Network Layer)
C. Layer 4 (Transport Layer)
D. Layer 7 (Application Layer)
24- Each IP packet must contain
A. Only Source address
B. Only Destination address
C. Source and Destination address
D. Source or Destination address
25- Which one of the following devices is used to connect
LAN to the whole world?
a. Repeater
b. Gateway
c. Bridge
d. Hub
1- How many bits are there in the Ethernet address?
a. 64 bits
b. 48 bits
c. 32 bits
d. 16 bits
2- Which type of topology is best suited for large businesses
networks?
a. Ring
b. Local area
c. Hierarchical
d. Star
3- Why IP Protocol is considered as unreliable?
a. A packet may be lost
b. Packets may arrive out of order
c. Duplicate packets may be generated
d. All of the above
4- In which of the following switching methods, the message
is divided into small packets?
a. Message switching
b. Packet switching
c. Virtual switching
d. None of the these
5- Which of following provides reliable communication?
a. TCP
b. IP
c. UDP
d. All of the above
6- The physical layer is concerned with
a) bit-by-bit delivery
b) process to process delivery
c) application to application delivery
d) port to port delivery
7- Repeater operates in which layer of the OSI model?
a. Physical layer
b. Data link layer
c. Network layer
d. Transport layer
8- Which transmission media provides the highest
transmission speed in a network?
a) coaxial cable
b) twisted pair cable
c) optical fiber
d) electrical cable
9- Routing tables of fa router keeps track of
a. MAC Address Assignments
b. Port Assignments to network devices
c. Distribute IP address to network devices
d. Routes to use for forwarding data to its destination
10- Which of this is not a guided media cable?
a) Fiber optical cable
b) Coaxial cable
c) Wireless LAN
d) Copper wire
11- The meaning of Straight-through Cable is
a. Four wire pairs connect to the same pin on each end
b. The cable Which Directly connects Computer to Computer
c. Four wire pairs not twisted with each other
d. The cable which is not twisted
12- UTP is commonly used in
a. DSL home access connection
b) FTTP
c) HTTP
d) None of the mentioned
13- A client of the DNS (Domain Name System)
application is called
a. DNS server
b. DNS Name
c. DNS resolver
d. DNS inquirer
14- Fiber optics possess following properties
a) Immune electromagnetic interference
b) Very less signal attenuation
c) Very hard to tap
d) All of the mentioned
15- Which mode of coaxial cable represents the cable
bandwidth by a single stream of data during transmission
of any data/information?
a. Baseband mode
b. Broadband mode
c. Passband mode
d. None of the above
16- Which of the following protocols is the connection-
less protocol?
a. UDP
b. TCP
c. IP
d. All of the these
17- What is the maximum length of the STP wire?
a. 20 ft
b. 50 ft
c. 50 meters
d. 100 meters
18- Which factors are responsible in determining the
reliability of a network?
a. Number of users & type of transmission media
b. Accuracy, Robustness, Failure rate & Establishment time
c. Hardware & Software
d. All of the above
19- How many pins does RJ-45 contain?
a. Two
b. Four
c. Eight
d. Ten
20- The performance of any network totally depends on.
a. Transit time
b. Response time
c. Both a & b
d. None of the above
21- Name the protocol used for remote terminal
connection service?
a. RARP
b. UDP
c. FTP
d. TELNET
22- Which kind of communication mode has a provision
of sharing channel capacity in addition to the
transmission and reception of data at a simultaneous
level?
a. Simplex
b. Half-duplex
c. Full-duplex
d. None of the above
23- Assume that source S and destination Dare
connected through two intermediate routers labeled R.
Determine how many times each packet has to visit the
network layer and the data link layer during a
transmission from S to D
a. Network layer - 4 times and Data link layer - 4 times
b. Network layer - 4 times and Data link layer - 3 times
c. Network layer - 4 times and Data link layer - 6 times
 d. Network layer-2 times and Data link layer - 6 times

24- What kind of transmission medium is most

appropriate to carry data in a computer network that
exposed to electrical interferences?
a) Unshielded twisted pair
b) Optical fiber
c) Coaxial cable
d) Microwave
25- How many types of cables are there?
a. 5
b. 4
c. 3
d. 2
26- Which sublayer of the data link layer performs data
link functions that depend upon the type of medium?
a) logical link control sublayer
b) media access control sublayer
c) network interface control sublayer
d) error control sublayer
27- Peer-To-Peer network has …… dedicated servers
a. 1
b. 2
c. 3
d. None
28- The data link layer takes the packets from ……..
and encapsulates them into frames for transmission.
a) network layer
b) physical layer
 c) transport layer
d) application layer
29- Does the client/server network back up the data?
a. Yes
b. No
30- The physical layer provides
a) mechanical specifications of electrical connectors and
cables
b) electrical specification of transmission line signal level
c) specification for IR over optical fiber
d) all of the mentioned
31- In a ring topology, data flows in a …… manner.
a. Anti clockwise
b. Clockwise
32- In the communication process the physical layer
provides
a) start and stop the dialogue
b) flow control
c) start bit signaling
d) error correction
33- What is OSI?
a. Open secure Intercommunication
b. Open system Intercommunication
c. Open shift Intercommunication
d. Open swing Intercommunication
34- In Simplex mode, communication is …… with data
flowing in only one direction.
a) Unidirectional
b) Bidirectional
35- An …… twisted pair is commonly used in
telecommunications.
a) Unshielded twisted pair
b) Shielded twisted pair
36- Which of the following are the data link layer
protocols?
a. Ethernet
b. Token ring
c. FDDI
d. PPP
e. All of the above
37- Which address is used to identify the actual device?
a. MAC address
b. IP address
38- Which type of topology is best suited for large
businesses networks?
a. Ring
b. Local area
c. Hierarchical
d. Star
39- Which of the following layers does the HTTP
protocol work on?
a. Physical layer
b. Data-link layer
c. Application layer
d. None of the these
40- The correct order of corresponding OSI layers is?
a. Presentation, Session, Network, Physical, Transport, Data
link
b. Network, Physical, Data link, Application, Presentation,
Session
 c. Application, Presentation, Session, Transport, Network,
Data link
d. Network, Presentation, Physical, Presentation, Session,
Transport
41- Which of the following methods is used to broadcast
two packets on the medium at a time?
a. Collision
b. Synchronous
c. Asynchronous
d. None of the above
42- Which of the following switch methods creates a
dedicated physical connection for more computers?
a. Message switching
b. Packet switching
c. Circuit switching
d. None of the these
43- Which of the following protocols is the Transport
Layer protocol?
a. UDP
b. TCPP
C. IP
46- Which of this is not a network, end user device?
a) Switch
b) PC
c) Smartphones
d) Servers
47- What is the full form of NIC?
a. Network ID card
b. Network interface card
c. National interface card
d. New interface card
48- Which of the following devices is not a networking
device?
a. Hub
b. Switch
c. Bridge
d. None of the these
49- Which one of the following devices is used to connect
LAN to the whole world?
a. Repeater
b. Gateway
c. Bridge
d. Hub
50- The protocol data unit (PDU) for the Data Link Layer is
a. Segment
b. Packet
c. Message
d. Frame
1- The transfer of information over a distance without the
use of electrical conductors is through
a) Computer
b) Coaxial cable
c) Fiber optics
d) Wireless transmission
2- From the selection below, identify the disadvantage of
using optical fiber technology.
a) Fiber optic transmitters and receivers are still relatively
expensive compared to electrical interfaces.
b) Fiber optic networks operate at high speeds up into the
gigabits with large carrying capacity.
c)Fiber optic cables costs much less to maintain.
d)Fiber optics are immune to electromagnetic interference.
3- The bundles of 2 or more fiber cables are protected by the
cable's outer covering, called
a) Core
b) Cladding
c) Jacket
d) Sheath
4- Thin glass center of the fiber where the light travels is
a) Core
b) Cladding
c) Jacket
d) Sheath
5- The direction of propagation in an unguided transmission
medium depends on the direction in which the signal was
emitted and any obstacles the signal may encounter while
propagating. TRUE or FALSE?
a) TRUE
b) FALSE
6- Which of the following TRUE?
a) The information on the conductor are more secured than
optical fiber.
b) Fiber optic cables sometimes produce sparks since they do
have leakage current.
c) There are no radiated magnetic fields around optical fibers,
the electromagnetic fields are confined within the fiber.
d) There is no loss of data when fiber optic cable is bent.
7- This cable consists of two copper wires where each wire is
separately encapsulated in polyvinyl chloride insulation.
a) Shielded twisted-pair
b) Unshielded twisted-pair
c) Coaxial cable
d)Fiber optics
8- The data transfer rate of any co-axial cable usually occurs
or lies
a. between TP and fiber optic cables
b. between STP and UTP cables
c. both a & b
d. none of the above
9- When is a straight-through cable used in a network?
a) when connecting a host to a switch
b) when connecting a router to another router
c) when connecting a host to a router
d) when connecting a host to another host
10- What is indicated by the 100 in the 100BASE-T
standard?
a) meters
b) megabits per second
c) twists per meter
d) feet
11- With respect to physical media, STP cables stands
for
a) Shielded Twisted Pair Cable
b) Spanning Tree Protocol Cable
c) Static Transport Protocol Cable
d) Shielded Two Power Cable
12- Which of the communication modes support twoway
traffic but in only once direction of a time?
a) Simplex
b) Half-duplex
c) Three-quarter's duplex
d) Full duplex
13- The loss in signal power as light travels down the
fiber is called
a) Attenuation
b) Propagation
c) Scattering
d) Interruption
14- Coaxial cable consists of concentric copper
conductors.
a) 1
b)2
c) 3
d) 4
15- Which of the following tasks is not done by data link
layer?
a) framing
b) error control
c) flow control
d) channel coding
16- Which sublayer of the data link layer performs data
link functions that depend upon the type of medium?
a) logical link control sublayer
b) media access control sublayer
c) network interface control sublayer
d) error control sublayer
17- Header of a frame generally contains
a) synchronization bytes
b) addresses
c) frame identifier
d) all of the mentioned
18- Automatic repeat request error management
mechanism is provided by
a) logical link control sublayer
b) media access control sublayer
c) network interface control sublayer
d) application access control sublayer

19- When 2 or more bits in a data unit has been changed

during the transmission, the error is called
a) random error
b) burst error
c) inverted error
d) double error
20- What is the max length of the Shielded twisted pair
cable?
a) 100 ft
b) 200 ft
c) 100 m
d) 200 m
21- What is the max data transfer rate of STP cables?
a) 10 Mbps
b) 100 Mbps
c) 1000 Mbps
d) 10000 Mbps
22- Which connector does the STP cable use?
a) BNC
b) RJ-11
c) RJ-45
d) RJ-69
23- What is the central device in star topology?
a) STP server
b) Hub/switch
c) PDC
d) Router
24- What is the max data transfer rate for optical fiber
cable?
a) 10 Mbps
b) 100 Mbps
c) 1000 Mbps
d) 10000 Mbps
25- For a 10Mbps Ethernet link, if the length of the
packet is 32bits, the transmission delay is (in
microseconds)
a) 3.2
b) 32
c) 0.32
d) 320
26- The time required to examine the packet's header
and determine where to direct the packet is part of
a) Processing delay
b) Queuing delay
c) Transmission delay
d) Propagation delay
27- Propagation delay depends on
a) Packet length
b) Transmission rate
c) Distance between the routers
d) Speed of the CPU
28- In a network, If P is the only packet being
transmitted and there was no earlier transmission, which
of the following delays could be zero?
a) Propagation delay
b) Queuing delay
c) Transmission delay
d) Processing delay
29- High speed ethernet works on
a) coaxial cable
b) twisted pair cable
c) optical fiber
d) unshielded twisted pair cable
30- Ethernet frame consist of:
a) MAC address
b) IP address
c) Default mask
d) Network address
31- MAC address is of
a) 24 bits
b) 36 bits
c) 42 bits
d) 48 bits
32- High speed ethernet works on
a) coaxial cable
b) twisted pair cable
c) optical fiber
d) unshielded twisted pair cable.
33- Which of the following layers is an addition to OSI
model when compared with TCP IP model
a) Application layer
b) Presentation layer
c) Session layer
d) Session and Presentation layer
34- Application layer is implemented in
a) End system
b) NIC
c) Ethernet
d) Packet transport
35- Delimiting and synchronization of data exchange is
provided by
a) Application layer
b) Session layer
c) Transport layer
d) Link layer
36- UTP is popular in LAN dueto it's
a) flexibility
b) low cost
c) ease of insulation
d) all of the mentioned