Scribd
Upload
44 views2 pages

Product Data Sheet M8060 ASTM 20140601

The document provides a product data sheet for Sumitomo Polyethylene HDPE M8060, detailing its applications, characteristics, and typical processing conditions. It includes typical properties such as melt index, density, tensile strength, and compliance with food contact regulations. Additionally, it covers storage, handling, disposal, and environmental considerations, along with manufacturer information and office locations.

Uploaded by

Dola Ezzet
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
44 views2 pages

Product Data Sheet M8060 ASTM 20140601

The document provides a product data sheet for Sumitomo Polyethylene HDPE M8060, detailing its applications, characteristics, and typical processing conditions. It includes typical properties such as melt index, density, tensile strength, and compliance with food contact regulations. Additionally, it covers storage, handling, disposal, and environmental considerations, along with manufacturer information and office locations.

Uploaded by

Dola Ezzet
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Product Data Sheet

SUMITOMO POLYETHYLENE HDPE


M8060
High Density, Injection Molding

Applications For technical parts with moderate ESCR requirements, cartridges,


storage containers, stacking crates, pallets and closures.
Characteristics High stiffness and good processability.
Typical Processing Conditions Extrusion temperature : 160 − 220 °C

Typical Properties

Physical Value Unit Method


Melt Index 190 °C, 2.16 kg 8 g/10min ASTM D1238
Density 0.960 g/cm3 ASTM D792-A
Mechanical Value Unit Method
at Yield 29 MPa ASTM D638
Tensile Strength
at Break 16 MPa ASTM D638
Flexural Modulus 1430 MPa ASTM D790
Izod Impact, Notched 23 °C 3 kJ/m 2 ASTM D256
Shore Hardness D 68 ASTM D2240
Thermal Value Unit Method
Vicat Softening Temperature 10 N 127 °C ASTM D1525
Other Value Unit Method
ESCR, Igepal 10 vol.% solution F50 5 h ASTM D1693

The values shown are typical values measured on the product and are not to be considered as guaranteed specifications; actual test results may vary.
Test specimen preparation conditions : as per ASTM D4976

Page 1 of 2 – Incomplete without disclaimer page Revision 20170401


Manufacturer
M8060 is manufactured in Saudi Arabia by Rabigh Refining & Petrochemical Co. (Petro Rabigh).
Petro Rabigh is an ISO 9001, ISO 14001 and OHSAS 18001 certified company.

Food Contact Application


Unmodified M8060 complies with the requirements of :
 US FDA Regulation 21 CFR 177.1520 and its amendments
 Regulation (EC) 1935/2004/EC (Framework), EU Commission Regulation 10/2011 (PIM), Commission Regulation
(EC) No. 2023/2006 (GMP) and their respective amendments
Please contact your nearest SCA representative for more information.

Restriction of Hazardous Substances


The substances regulated under EU Directive 2011/65/EC and its amendment on RoHS in electrical and electronic
equipment, are not used in the manufacturing process of M8060 and are therefore not expected to be present.

Storage and Handling


M8060 is supplied in 25 kg bags or in bulk containers depending on packaging options available for different
markets. It is advisable to store in a well ventilated storage facility, protected from rain, direct exposure to
sunlight, temperature and dust.
Moisture may accumulate inside the packaging if there is a significant fluctuation in ambient temperature and high
relative humidity. If this occurs, customer is strongly advised to dry the resin prior to use. Direct exposure to
sunlight and excessive ambient temperature may affect the properties, appearance and odor characteristic of the
resin.
It is recommended to process M8060 within six months upon receipt.
Please refer to the Safety Data Sheet (SDS) for information regarding industrial health and safety issues.

Disposal and the Environment


SCA prioritizes environmental management in all our operations in responsibility and respect towards the
community and the environment.
Unmodified M8060 is readily recyclable, both for reuse via reprocessing and for energy reclamation through
incineration. If disposed in landfills, our products, which are inert materials, do not pose pollution risks since they
do not generate gaseous or liquid emissions.

Office Locations
SUMITOMO CHEMICAL ASIA PTE LTD
150 Beach Road, #17-07 Gateway West, SINGAPORE 189720
Phone +65 6303 5188 Fax +65 6298 9621 www.sumitomo-chem.com.sg
SUMIKA PLASTICS AND CHEMICALS TRADING (SHANGHAI) CO., LTD.
Unit 46-07 Grand Gateway II, No.3 Hongqiao Road, Xu Hui District, Shanghai, CHINA 200030
Phone +86 21 6448 2255 Fax +86 21 6407 7365
SUMIKA PLASTICS AND CHEMICALS TRADING (SHANGHAI) CO., LTD., GUANGZHOU BRANCH
Room 6404, Office Building, CITIC Plaza, No.233, North Tianhe Road, Guangzhou City, CHINA 510613
Phone +86 20 3877 3577 Fax +86 20 3877 3511
SUMITOMO CHEMICAL ASIA PTE LTD
Vietnam Representative Office, 7th Floor, Unit 701-3, Me Linh Point Tower, 2 Ngo Duc Ke Street, Dist. 01, Ho Chi Minh City, VIETNAM
Phone +84 8 3520 2767 Fax +84 8 3520 2911
SCA SOUTH ASIA PETROCHEMICALS PRIVATE LIMITED
Private Office No. 218, DBS Business Center, FF, World Trade Tower, Barakhamba Lane, Connaught Place, New Delhi 110001, INDIA
Phone +91 11 4050 9218 Fax +91 11 2341 4740
SUMITOMO CHEMICAL EUROPE S.A./N.V.
Woluwelaan, 57, B-1830 Machelen, BELGIUM
Phone +32 2 251 0650 Fax +32 2 251 2991 www.sumitomochemicaleurope.eu
SUMITOMO CHEMICAL EUROPE N.V.
Turkey Liaison Office, Barbaros Mah. Cigdem Sok. No:1, Agaoglu My Office K:10, D:44-45, 34746 Bati Atasehir, Istanbul, TURKEY
Phone +90 216 680 3334 Fax +90 216 680 1012

Disclaimer
All information contained in this document is provided in good faith and its sole purpose is to provide information regarding SCA’s polymer products. This product catalogue is provided on an “as is” basis. SCA
makes no representation, warranty, express or implied and assumes no liability as to the accuracy or completeness of any of the information contained in this product catalogue. The values shown are purely
values measured on the product and are not to be considered as guaranteed specifications. Any information on this product catalogue should not be considered as a recommendation. Customer is responsible
to ensure that SCA materials, whether used alone or mix with other materials, are suitable for the intended application. SCA expressly disclaims for any and all liability, including direct and indirect loss,
consequential loss or damages based on or relating to the use or errors of and omissions of such information in this product catalogue. Information contained herein is NOT intended to announce product
availability anywhere in the world. Please contact your nearest SCA representative for more detailed information.

Page 2 of 2 Revision 20170401

You might also like