Scribd
Upload
70 views

Method Statement for Stone Pitching

The method statement outlines the process for stone pitching, starting with excavation and slope trimming. It includes protective measures for the excavated area, installation of weepholes and dowel bars, and the construction of stone pitching with specific dimensions and mortar specifications. The document emphasizes the importance of following the specified drawing and proper material usage.

Uploaded by

Aizat Sera Suwandi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
70 views

Method Statement for Stone Pitching

The method statement outlines the process for stone pitching, starting with excavation and slope trimming. It includes protective measures for the excavated area, installation of weepholes and dowel bars, and the construction of stone pitching with specific dimensions and mortar specifications. The document emphasizes the importance of following the specified drawing and proper material usage.

Uploaded by

Aizat Sera Suwandi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

METHOD STATEMENT FOR STONE PITCHING

1. Excavate and trim slope using machinery or manual.


2. Protect excavated area with PE sheets end of the day and lay temporary pipe culvert to prevent blockage
during rainfall. The excavation works shall be as specified in the drawing.
3. Lay 50mm thk wet mortar.
4. Install weephole 75mm dia. PVC at 2m c/c grid together with ± 25mm aggregate wrapped with non-
woven geotextile.
5. Install dowelbar T12 at 1m grid, 1m length with 700mm embedment.
6. Import and compact rock, construct average 230mm thick stone pitching comprising of block stone 6”
x 9” at slope surface pointed with jointed in cement and sand (1:3) mortar.

You might also like