Scribd
Upload
8 views

LINDAPTER Type LR

LINDAPTER Type LR

Uploaded by

razvan65
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
8 views

LINDAPTER Type LR

LINDAPTER Type LR

Uploaded by

razvan65
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

18 | Girder Clamps by Lindapter ®

Type LR
A versatile, self-adjusting clamp
designed to suit a range of flange
thicknesses.

Saddle
GIRDER CLAMPS

Nose

Slot

Leg

Clip Tail
RAIL FIXINGS

Y X
LIFTING POINTS

Z
HOLLO-BOLT

Note 1: When installing, ensure the straight (not tapered) leg of the saddle is in contact with the flange.
Note 2: Y, X and T will vary depending on the thickness of V.

• Clamping ranges from 3mm - 24mm (size M24).


• For parallel and tapered flanges up to 15°.
• The leg of the saddle prevents the clamp from rotating.
• The tail spans slotted clearance holes.
FLOOR FIXINGS

Packings are available to increase the clamping range, see page 20.
Location plate / end plate details can be found on page 21.

Material: Malleable iron, zinc plated / hot dip galvanised.

Safe Working Loads (FOS 5:1) Dimensions


SUPPORT FIXINGS

Product Bolt 8.8 Tensile Slip Tightening Clamping Range Y X T Width


Code Z / 1 Bolt / 2 Bolts Torque* V with Saddle
kN kN Nm mm mm mm mm mm

LR10 M10 1.5 - 20 3 - 10 21 - 24 24 - 26 21 - 24 33


LR12 M12 5.8 0.7 69 3 - 12 26 - 29 25 - 31 25 - 29 39
LR16 M16 7.3 1.5 147 3 - 16 30 - 35 34 - 37 30 - 36 46
DECKING FIXINGS

LR20 M20 14.7 3.0 285 3 - 20 42 - 49 46 - 51 41 - 48 57


LR24 M24 19.7 4.5 491 3 - 24 47 - 57 52 - 58 44 - 54 76
* Torque figures based on bolts / setscrews in an unlubricated condition. For further information on lubricated fasteners see page 70.

For Characteristic Resistances when designing a connection to Eurocode 3, please refer to DoP No.006 on the website www.Lindapter.com/About/CE

®
+44 (0) 1274 521444 www.Lindapter.com © Lindapter International 2018

You might also like