Edmo Jacks Page 1 of 5

Hydraulic Jacks - comply with AS/NZ2693

Any application for a heavy duty safe jacking device can be, and is, met by EDMOTM range of jacks. As with
the tyre presses, the jacks can be operated by one person, being extremely easy to manoeuvre. EDMOTM
JACKS cover the complete requirement for heavy Earthmover vehicles, Dozers, Loaders and indeed any
where there is a need for a heavy duty safe jacking device, and have also been very popular overseas. All the
jacks have safety shut off valves, which prevent the jack from collapsing in the event of an accident. The jack
is entirely operated from the handle and therefore there is no need for the operator to be under the load when
jacking. (This is a requirement of Australian Standard No.2693). The only source of power required for the
jacks, which range in capacity from 25 to 250 tonnes, is a 100 to 120 PSI air supply. EDMOTM jacks can also
be made to order or customised to meet specific purpose requirements.

LIFT'n'LOCK a combined hydraulic jack and stand - (patented). The unit

is a one piece machine, operated in the same manner as a conventional
EDMOTM Jack. When the desired height is reached a mechanical locking
arrangement locks the jack in the desired position preventing accidental
retraction.

The LIFT'n'LOCK Jack/Stand can be manufactured to specific dimensions and has is adjustable in increments
of 35mm. LIFT'n'LOCK complies with both Australian Standards Vehicle Jacks AS/NZ 2693 and Vehicle
Support Stands AS2538.

See pages below for more technical information about, the EDMOTM range of Jacks.

While all Jacks come with Dollies as stated, we supply as an optional extra
a SWIVEL DOLLIE which will accommodate up to a 10 degree angle
with 360 degree rotation. The circular grooved top is hardened to enable
grip. These dollies will fit directly into the top of the EDMO jacks or
Extension Dollies.

http://www.edmo.com.au/jacks.html 1/19/2008
Edmo Jacks Page 2 of 5

The EDMOTIVATOR a recently developed addition to the EDMO Jack: see Other Products.

EDMO Jack Specifications

A: Closed Height with Cap Dollie

B: Raised Height with Cap Dollie
C: Raised 2nd Stage & Cap Dollie
D: Raised Height with Standard Extn
(Supplied with Jack & Cap Dollie)
E: Overall Dimension
F: Front of Base to Axle Dimension
G: Base Width
H: Axle Width
J: Overall Height at Handle

Note: * Height includes flat or dished cap dollie.

Only one extension dollie should be used in any operation along with a flat or dished cap dollie.

SINGLE STAGE JACKS - STANDARD MODEL SPECIFICATIONS

MODEL: EDMO DM5

TYPE: SINGLE STAGE POWER UP & DOWN
CAPACITY(SWL): 50,000 kgs
CLOSED HEIGHT*: 422mm
EXTENDED HEIGHT*: 599mm
STANDARD EXTENSION: 150mm SUPPLIED WITH JACK
OPTIONAL EXTENSIONS: 200mm
OPTIONAL SWIVEL DOLLIE: 10° Angle Around 360°

MODEL: EDMO DM7

TYPE: SINGLE STAGE POWER UP & DOWN
CAPACITY(SWL): 75,000 kgs
CLOSED HEIGHT*: 420mm
EXTENDED HEIGHT*: 600mm
STANDARD EXTENSION: 150mm SUPPLIED WITH JACK
OPTIONAL EXTENSIONS: 200mm
OPTIONAL SWIVEL DOLLIE: 10° Angle Around 360°

http://www.edmo.com.au/jacks.html 1/19/2008
Edmo Jacks Page 3 of 5

MODEL: EDMO DM10

TYPE: SINGLE STAGE POWER UP & DOWN
CAPACITY(SWL): 100,000 kgs
CLOSED HEIGHT*: 637mm
EXTENDED HEIGHT*: 1018mm
STANDARD EXTENSION: 250mm SUPPLIED WITH JACK
OPTIONAL EXTENSIONS: 200mm, 300mm, 450mm
OPTIONAL SWIVEL DOLLIE: 10° Angle Around 360°

MODEL: EDMO DM15

TYPE: SINGLE STAGE POWER UP & DOWN
CAPACITY(SWL): 150,000 kgs
CLOSED HEIGHT*: 647mm
EXTENDED HEIGHT*: 1015mm
STANDARD EXTENSION: 250mmSUPPLIED WITH JACK
OPTIONAL EXTENSIONS: 200mm, 300mm, 450mm
OPTIONAL SWIVEL DOLLIE: 10° Angle Around 360°

EDMO DMA200
MODEL:
SINGLE STAGE POWER UP & DOWN
TYPE:
CAPACITY(SWL):
200,000 kgs
CLOSED HEIGHT*:
651mm
EXTENDED HEIGHT*:
1018mm
STANDARD EXTENSION:
250mm SUPPLIED WITH JACK
OPTIONAL EXTENSIONS:
200mm, 300mm, 450mm
OPTIONAL SWIVEL DOLLIE:
10° Angle Around 360°

TELESCOPIC JACKS- STANDARD MODEL SPECIFICATIONS

MODEL:
TYPE: EDMO LPDT55/25
TELESCOPIC STAGE POWER UP &
CAPACITY(SWL): DOWN
CLOSED HEIGHT*: 55,000 kgs 1ST Stage, 25,000 kgs 2nd Stage
EXTENDED HEIGHT* 1st
EXTENDED HEIGHT* 2 nd 250mm
STANDARD EXTENSION: 378mm
OPTIONAL EXTENSIONS: 490mm
OPTIONAL SWIVEL DOLLIE: 200mm SUPPLIED WITH JACK
300mm

http://www.edmo.com.au/jacks.html 1/19/2008
Edmo Jacks Page 4 of 5
10° Angle Around 360°

MODEL: EDMO MPDT100/50

TYPE: TELESCOPIC STAGE POWER UP &
DOWN
CAPACITY(SWL): 100,000 kgs 1ST Stage, 50,000 kgs 2nd
Stage
CLOSED HEIGHT*: 615mm
EXTENDED HEIGHT* 1st 956mm
EXTENDED HEIGHT* 2 nd 1299mm
STANDARD EXTENSION: 200mm SUPPLIED WITH JACK
OPTIONAL EXTENSIONS: 250mm, 300mm, 450mm
OPTIONAL SWIVEL DOLLIE: 10° Angle Around 360°

MODEL: EDMO TPDT150/75

TYPE: TELESCOPIC STAGE POWER UP &
DOWN
CAPACITY(SWL): 150,000 kgs 1ST Stage, 75,000 kgs 2nd
Stage
CLOSED HEIGHT*: 615mm
EXTENDED HEIGHT* 1st 956mm
EXTENDED HEIGHT* 2 nd 1299mm
STANDARD EXTENSION: 200mm SUPPLIED WITH JACK
OPTIONAL EXTENSIONS: 250mm, 300mm
OPTIONAL SWIVEL DOLLIE: 10° Angle Around 360°

MODEL: EDMO PDT200/100

TYPE: TELESCOPIC STAGE POWER UP &
DOWN
CAPACITY(SWL): 200,000 kgs 1ST Stage, 100,000 kgs 2nd
Stage
CLOSED HEIGHT*: 746mm
EXTENDED HEIGHT* 1st 1181mm
EXTENDED HEIGHT* 2 nd 1635mm
STANDARD EXTENSION: NIL SUPPLIED WITH JACK
OPTIONAL EXTENSIONS: 150mm
OPTIONAL SWIVEL DOLLIE: 10° Angle Around 360°

LIFT'N'LOCKS- STANDARD MODEL SPECIFICATIONS

http://www.edmo.com.au/jacks.html 1/19/2008
Edmo Jacks Page 5 of 5

EDMO LL10
MODEL:
COMBINED JACK & LOCKING STAND
TYPE: LIFT'N'LOCK
POWER UP & DOWN
CAPACITY(SWL):
100,000 kgs
CLOSED HEIGHT*:
727mm
EXTENDED HEIGHT*:
1158mm
STANDARD EXTENSION:
NIL SUPPLIED WITH JACK
OPTIONAL EXTENSIONS:
150mm, 200mm, 300mm,

EDMO LL5
MODEL:
COMBINED JACK & LOCKING STAND
TYPE: LIFT'N'LOCK
POWER UP & DOWN
CAPACITY(SWL):
50,000 kgs
CLOSED HEIGHT*:
435mm
EXTENDED HEIGHT*:
655mm
STANDARD EXTENSION:
NIL SUPPLIED WITH JACK
OPTIONAL EXTENSIONS:
150mm, 200mm, 300mm, 450mm

http://www.edmo.com.au/jacks.html 1/19/2008