HARDINGE

WORKHOLDING
Collet Chuck Systems

800-843-8801
www.Hardinge.com 1
 WHY BUY A
HARDINGE FLEXC
QUICK CHANGE
COLLET SYSTEM?
• 10X the grip range of
standard collets +/-.020"
• 2X as accurate (.0004 TIR)
• Up to 19X faster changeover
compared to standard
collets or 3 jaw chucks
• LIFETIME guarantee on
collet vulcanization
• Fully interchangeable
with competitor models
(42mm & 65mm)
• TRUE PARALLEL GRIPPING

2
3
STYLE D – PULL-BACK WITH THRU-HOLE

42mm* Style D Spindle Mount:

Pull-back style with thru-hole
Spindle Style Part Number D1 - Diameter D - Diameter L1 - Length L - Length Price
A2-5 V42 5D00300 4.016" (102) 5.512" (140) .846" (21.5) 3.543" (90) $1795
A2-6 V42 6D00400 4.016" (102) 6.496" (165) .846" (21.5) 3.543" (90) $1795
140mm V42 140D01700 4.016" (102) 5.906" (150) .846" (21.5) 3.543" (90) $1795
* Limited to machine capacity. (millimeters in parentheses)

65mm* Style D Spindle Mount

Pull-back style with thru-hole
Spindle Style Part Number D1 - Diameter D - Diameter L1 - Length L - Length Price
A2-5 V65 5D00500 4.736" (120.3) 6.102" (155) 1.043" (26.5) 3.740" (95) $1990
A2-6 V65 6D00600 4.736" (120.3) 6.496" (165) 1.043" (26.5) 3.740" (95) $1990
A2-8 V65 8D00700 4.736" (120.3) 8.268" (210) 1.043" (26.5) 3.858" (98) $1990
140mm V65 140D01900 4.736" (120.3) 6.299" (160) 1.043" (26.5) 3.937" (100) $1990
* Limited to machine capacity. Additional lengths available. (millimeters in parentheses)

L
L1

why you should choose FlexC® pull back chucks

MAIN SPINDLE APPLICATIONS BETTER PART FINISH D1 D
• Used on main spindle • Collet chucks allow for
applications where the higher RPMs than
collet is pulled into the traditional 3-jaw chucks.
chuck sleeve to close 42 and 65mm systems
on your part. QUALITY ASSURANCE
• Manufactured and
ULTIMATE FLEXIBILITY
• Capable of accepting
assembled in the USA
with top grade materials
BAR WORK
Hardinge Quick Change and inspection processes.
Adapters. (see page 8)
ACCURACY IMPROVEMENTS
COMPACT DESIGN • .0002”TIR on the closing
• Compact design allows angle of the chuck.
for optimal tool
clearances and maximum 10X THE GRIP RANGE
machining workspace. • Grip range of
+/- .020” allowing
for part size variation.

4
 STYLE A – PULL-BACK DESIGN WITH A DEAD-LENGTH® WORKSTOP

BAR SLUG WORK

V42 5A01006
42mm* Style A Spindle Mount: (M12 X 1.75)
Pull-back style with removable dead-length work stop Dead Stop V65 6A01206
Spindle Style Part Number D - Diameter D - Diameter L - Length
1 1
L - Length Price Included (M12 X 1.75)
A2-5 V42 5A01000 4.016" (102) 5.512" (140) .610" (15.5) 4.764" (121) $2500 V80 6A06407
A2-6 V42 6A01100 4.016" (102) 6.496" (165) .610" (15.5) 4.764" (121) $2500 (1” - 20)
140mm V42 140A01600 4.016" (102) 5.906" (150) .610" (15.5) 4.961" (126) $2500
* Limited to machine capacity. (millimeters in parentheses)

L
L1

D1 D

65mm* Style A Spindle Mount:

Pull-back style with removable dead-length work stop
Spindle Style Part Number D1 - Diameter D - Diameter L1 - Length L - Length Price 42 and 65mm systems
A2-5 V65 5A01200 4.736" (120.3) 6.102" (155) .728" (18.5) 5.118" (130) $2700
A2-6 V65 6A01300 4.736" (120.3) 6.496" (165) .728" (18.5) 5.118" (130) $2700
A2-8 V65 8A01400 4.736" (120.3) 8.268" (210) .728" (18.5) 5.315" (135) $2700
140mm V65 140A02300 4.736" (120.3) 6.299" (160) .728" (18.5) 5.248" (133) $2700
170mm V65 170A01800 4.736" (120.3) 6.299" (160) .728" (18.5) 5.118" (130) $2700
* Limited to machine capacity. Additional lengths available. (millimeters in parentheses)

Work stop wrench V65-6DL05810

(65mm) is included with the 80mm
spindle mount assembly to remove
or install the work stop.

L
L1

80mm* Style A Spindle Mount:

Pull-back style with removable dead-length work stop
Spindle Style Part Number D1 - Diameter D - Diameter L1 - Length L - Length Price D1 D

A2-5 V80 5A06600 5.750" (146.1) 7.700" (195.6) 2.000" (50.8) 5.174" (131.4) $2900
A2-6 V80 6A06400 5.750" (146.1) 7.700" (195.6) 2.000" (50.8) 5.174" (131.4) $2900
A2-8 V80 8A06500 5.750" (146.1) 8.000" (203.2) 2.000" (50.8) 5.174" (131.4) $2900
* Limited to machine capacity. (millimeters in parentheses) 80mm systems

5
STYLE DL – PUSH-TO-CLOSE DESIGN WITH A DEAD-LENGTH® WORKSTOP

BAR SLUG WORK

42mm* Style DL Spindle Mount:
Push-to-Close with work stop
Spindle Style Part Number D1 - Dia. D - Dia. L1 - Length L - Length Price V42 5DL05406
A2-5 (1) V42 5DL05400 — 5.315" (135) — 4.724" (120) $2990 (M12 X 1.75)
A2-6 (2) V42 6DL05500 5.315" (135) 6.299" (160) 2.953" (75) 4.724" (120) $2990 Dead Stop V65 6DL05836
140mm (2) V42 140DL04400 5.315" (135) 5.906 (150) 3.944 (100) 4.724" (120) $2990 Included (1” - 20 assembly)
* Limited to machine capacity. (millimeters in parentheses) V80 6DL06213
(1” - 20 assembly)

Work stop wrench V42-5DL05410

(42mm) is included with the spindle
mount assembly to remove or install
the work stop. L

65mm* Style DL Low Profile Spindle Mount:

Push-to-Close with work stop D

Spindle Style Part Number D - Dia.

1
D - Dia. L - Length
1
L - Length Price
A2-5 V65 5DL05740 5.404” (137.3) 6.299" (160) 1.448" (36.8) 4.845" (123) $3300
A2-6 V65 6DL05940 5.404” (137.3) 6.299" (160) 1.448" (36.8) 4.845" (123) $3300
A2-8 V65 8DL06040 5.404” (137.3) 8.268" (210) 1.448" (36.8) 5.345" (135.8) $3300 Spindle Style 1
140mm V65 140DL02440 5.404” (137.3) 6.299" (160) 1.448" (36.8) 4.908" (124.6) $3300
* Limited to machine capacity. (millimeters in parentheses)

L
L1

D1 D
80mm* Style DL Spindle Mount:
Push-to-Close with work stop
Spindle Style Part Number D1 - Dia. D - Dia. L1 - Length L - Length Price
A2-5 V80 5DL06100 5.950" (151.2) 7.700" (195.6) 1.354" (34.4) 4.957" (125.9) $3600 Spindle Style 2
A2-6 V80 6DL06200 5.950" (151.2) 7.700" (195.6) 1.354" (34.4) 4.957" (125.9) $3600
A2-8 V80 8DL06300 5.950" (151.2) 8.250" (209.6) 1.354" (34.4) 5.207" (132.3) $3600
140mm V80 140DL06400 5.950” (151.2) 7.700” (195.6) 1.354” (34.4) 5.357” (136.1) $3600 L

* Limited to machine capacity. (millimeters in parentheses) L1

D1 D

65/80mm systems

6
 FLEXC® COLLETS

quality
Hardinge guarantees a collet head concentricity of .0002” (.005mm) TIR for round sizes after
the segments are joined in the vulcanization process. Hardinge test results from repeated
cycles of collet actuation assure long life of the Hardinge vulcanization process.

FlexC Changing Price

Capacity Wrench
42mm C 4200000-WREN $495
65mm C 65000-00-WREN $495
80mm C 80000-00-WREN $550

fast delivery
Hardinge stocks an extensive inventory of finished collets for all common
sizes. Semi-Finished inventory is also available allowing for decimal sized
collets to be delivered in 5 days or less.
Rated Round Price Hexagon Price Square Price
Capacity Smooth/ Smooth/ Smooth
Serrated Serrated
fractional 7
/32 to 15/8" 5
/ to 13/8" 5
/16 to 19/64"
42mm $242.25 16 $350 $350
metric 5 to 42mm 8 to 36 8 to 29
fractional ¼ to 29/16" 5
/16 to 21/8" 5
/16 to 113/16"
65mm $297 $425 $425
metric 5 to 65mm 8 to 56 8 to 46
fractional 15
/32 to 31/4" 15
/32 to 23/4" 15
/32 to 21/4"
80mm $414 $545 $545
metric 12 to 82.5mm 12 to 69.9 12 to 57.2

custom manufacturing
Hardinge’s custom engineering
department can design and manufacture
special FlexC collets for any application.
Sample applications include stepped holes,
special shapes, off-center and more.

emergency collets
Size / Pilot Hole Part Number Price Boring Ring Price
42mm 5mm Pilot C0420000000005
15mm Pilot C0420000000015 $231 C042000000RING $100
30mm Pilot C0420000000030
65mm 8mm Pilot C0650000000008
20mm Pilot C0650000000020 $287 C065000000RING $150
40mm Pilot C0650000000040
80mm 12mm Pilot C0800000000012
25mm Pilot C0800000000025 $400 C080000000RING $200
40mm Pilot C0800000000040
C080000000RING

7
NEW ULTIMATE QUICK CHANGE FLEXIBILITY
FlexC 65 Adapters are ideal for shops
looking for ultimate flexibility! Now in single setup
one setup a customer can use multiple
workholding options, eliminating costly
and time consuming changeovers! for CNC Lathes manual
In one setup you can use: collet block
• FlexC Quick Change Collets
• 5C Collets
• Sure-Grip Expanding Collets
• 5C Step Chucks & Closers

FlexC® collets
When accuracy, grip range and
grip strength is needed, FlexC
collets are a perfect option.
FlexC collets have .0002” TIR
and +/- .020” grip range.

Capacity Price
42mm $242
65mm $297
80mm $414

Standard sure-grip expanding adapters

You can now utilize Hardinge’s Sure-Grip expanding system in L
our FlexC 65 products! Hardinge® Sure-Grip® Expanding Collet
Systems offer solutions to difficult machining problems where ID
gripping is required. Sure-Grip collets have .015" expansion range
and .0002" TIR.
D
Part Number* Grip Range D - Diameter L - Length Price
V65 2001000 1/2" to 3/4" 4.891" (124.23) 2.087" (53.01) $600
V65 2501000 3/4" to 1" 4.891" (124.23) 2.483" (63.07) $625
V65 3001000 1" to 1 1/2" 4.891" (124.23) 2.947" (74.85) $650
V65 4001000 1 1/2" to 2 1/4" 5.25" (133.35) 3.536" (89.81) $675 Sure-Grip
V65 5001000 2 1/4" to 3" 5.25" (133.35) 4.274" (108.56) $700 Expanding Collet
V65 6001000 3" to 4" 5.25" (133.35) 4.337" (110.16) $725
* requires part number V65 5C01000 for use.

8
 5C collet adapter
Hardinge’s 5C Spindle tooling has been
an industry standard for over 100 years. L

Customers can now utilize their 5C L1

spindle tooling in our FlexC 65 system

for applications that are ideally suited
for these style collets. Ideal applications D1 D
include extended nose, small hole, special
shapes, Internal Gripping and more!

Item Part Number D1 D L1 L Price

Diameter Diameter Length Length
5C Collet V65 5C01010S 1.984" 4.891" 1.25" 2.5625" $1600 V65 5C01010
Adapter (50.39) (124.23) (31.75) (65.09)

Standard 5C Step Chucks & A2-3 Closers

Don’t limit your machine setup to the capacity of the FlexC 65. With
L
our 5C adapter, customers can now use Hardinge’s Step Chucks
and Closers allowing for part sizes of up to 6". Castings, moldings,
stampings and machined parts are held rigidly and accurately. Tubing
can be held without crushing or distorting. Accurate gripping, the same
as with collets, is yours when you use regular and extra depth capacity D

step chucks for holding larger diameters.

Item Part Number Step Chuck D - Diameter L - Length Price

Size
Regu- V65 235C2RD 2" 3.0625" (77.79) 3.0625" (77.79) $260
lar A2-3 5C Adapter
V65 235C3RD 3" 3.75" (95.25) 3.0625" (77.79) $280 with 4 Closer
Depth
V65 235C4RD 4" 4.75" (120.65) 3.0625" (77.79) $300
V65 235C5RD 5" 5.75" (146.05) 3.0625" (77.79) $350 L
V65 235C6RD 6" 6.75" (171.45) 3.0625" (77.79) $390

Item Part Number A2-3 D - Diameter L - Length Price

Closer Size
D
Extra V65 235C2ED 2" 3.625" (92.08) 3.8125" (96.84) $290
Depth V65 235C3ED 3" 4.25" (107.95) 3.8125" (96.84) $310
V65 235C4ED 4" 5.25" (133.35) 3.8125" (96.84) $330
V65 235C5ED 5" 6.25" (158.75) 3.8125" (96.84) $380
V65 235C6ED 6" 7.25" (184.15) 3.8125" (96.84) $420 A2-3 5C Adapter
with 4 ED Closer

9
FLEXC® ACCESSORIES

master collet & pads

FlexC Style-S Part Number Price "S" Pad* Round Round Hexagon Square Emergency Semi-Hard
Master Collets Smooth Serrated Smooth
C0650S16MASTER $275 S16 $59.50 $63 $73.50 $73.50 $53.50 $56.50
65mm C0650S20MASTER $297 S20 $79 $83 $102.50 $102.50 $74 $76
C0650S22MASTER $320 S22 $87 $91.50 $118 $118 $81 $84
C0800S26MASTER $414 S26 $97.50 $102 $130 $130 $90.50 $94.50
80mm C0800S30MASTER $437 S30 $131.50 $144.50 $163 $163 $125 $128

Part Number Price

S16, S20 and S26
B Clamp assy 7619 $7.20
B wrench 7637 $1.35
S22 and S30
C Clamp assy 7627 $7.60
C wrench 7639 $2.30

ejectors
Hardinge Spring Part Ejectors Long Stroke,Variable Speed Part Ejector FlexC Part Stops

Hardinge’s standard spring ejectors The Hardinge JL-Series Variable Speed Part A part stop is used to accurately
are used to push a part into the Ejector is used when maximum stroke and locate z-axis positioning of slug
parts catcher or conveyor when flexibility is needed. This part ejector has work within a collet. These easy
finished. These standard spring 4.4” of stroke and allows users to adjust the to install stops are adjustable for
ejectors have a limited amount of rate of speed at which the ejection rod will desired part length. The rigid
stroke and apply consistent force, push the part out, making sure the part is design of these part stops allows
regardless of part size. ejected exactly how you want every time! peace of mind knowing that your
part length will remain consistent
part to part.

Part Number Chuck Price Part Number Chuck Price Part Number Chuck Price
Model Model Model
1057000000042A 42A $250 Long Stroke, Variable Speed Solid Stops
105700000042DL 42DL $250 JL 000100065A 65A $1200 1049000000042A 42A $150
1057000000065A 65A $300 JL 000100065DL 65DL $1200 104900000042DL 42DL $150
327300000065DL 65DL $300 JL 000100080A 80A $1200 1049000000065A 65A $175
3273000000080A 80A $350 JL 000100080DL 80DL $1200 V65 6DL05836 65DL $175
327300000080DL 80DL $350 A= Pull back w/stop; DL= Dead length 3269000000080A 80A $200
A= Pull back w/stop; DL= Dead length 326900000080DL 80DL $200
Patent Pending
A= Pull back w/stop; DL= Dead length

10
 SAME-DAY SHIPPING
• Hardinge holds to a strict 95% same day ship
rate for all standard Workholding products.
Serving our customer requests quickly is our
goal.

• Hardinge stocks more than 15,000

Workholding SKUs in our in-house inventory.
We ship every day, all day, to serve our
customers.

CUSTOMER SUPPORT
• Our fully staffed team of experienced
customer service representatives will help
you from product identification to shipment.

• Accomplished Engineers, averaging over

20 years of service to the industry, making
that special application easy for you.

SHOPHARDINGE.COM

11
COLLET ADAPTATION CHUCKS

WHY WOULD I WANT TO USE

COLLETS ON MY JAW-CHUCK LATHE?

To Increase Productivity
over 3-Jaw Chucks
• Faster job changeover using collets:
—5C, 16C, 3J, 20C, 25C, S15, S20, S26, S30
• Higher spindle speeds for reduced cycle times

To Increase Capability over 3-Jaw Chucks

• More work envelope to machine longer workpieces
• Achieve higher precision
• Interchangeable Style “S” master pads accommodate
a wide range of workpiece sizes and configurations

To Increase Control over 3-Jaw Chucks

• Exact part length control
• Improved concentricity for optimum part roundness

Additionally, centrifugal force is not an issue with

Collet Adaptation Chucks. Your machine can
operate at the maximum rpm your tooling will
allow. Higher rpm means more pieces per hour and
higher profits. Review our brochure and select the
HCAC Collet Adaptation Chuck that best meets
your requirements.

Link-ups can be designed to fit your specific

machine. The same link-up can then be used for
the entire line of workholding elements including
internal Sure-Grip® Collet applications.

Custom-manufacturing available, please call

800-843-8801.

12
 PULL-BACK DESIGN

Collet Adaptation Chucks for CNC Lathes

L

Flange Nose

L
L2

Flange Nose Step

L2

Collet Adaptation Chucks Plain and Stepped - Dimensions

Spindle- Assembly Length Length Flange Step OD Nose Collet Thru
to-Collet Part Number Spindle L L2 OD OD Capacity Price
A2-5 5C-35 78010000000000 A2-5 3.500" 1.000" 5.250" — 3.250" 1.0625" $1015
(88.90) (25.40) (133.35) (82.55) (26.98)
A2-5 5C-50 78030000000000 A2-5 5.000" 1.000" 5.250" — 3.250" 1.0625" $1015
(127.00) (25.40) (133.35) (82.55) (26.98)
A2-5 16C-60 78170000000000 A2-5 6.000" 1.000" 5.250" — 3.250" 1.625" $1300
(152.40) (25.40) (133.35) (82.55) (41.27)
A2-5 3J-55 78110000000000 A2-5 5.500" 1.000" 5.250" — 3.250" 1.750" $1340
(139.70) (25.40) (133.35) (82.55) (44.45)
A2-6 5C-50 78050000000000 A2-6 5.000" 1.125" 6.500" 4.250" 3.250" 1.0625" $1230
(127.00) (28.57) (165.10) (107.95) (82.55) (26.98)
A2-6 5C-60 78070000000000 A2-6 6.000" 1.125" 6.500" 4.250" 3.250" 1.0625" $1195
(152.40) (28.57) (165.10) (107.95) (82.55) (26.98)
A2-6 16C-60 78190000000000 A2-6 6.000" 1.125" 6.500" 4.250" 3.250" 1.625" $1370
(152.40) (28.57) (165.10) (107.95) (82.55) (41.27)
A2-6 3J-60 78130000000000 A2-6 6.000" 1.125" 6.500" 4.250" 3.250" 1.750" $1410
(152.40) (28.57) (165.10) (107.95) (82.55) (44.45)
A2-8 16C 97Z0000904853M A2-8 6.500" 1.250" 8.250" 5.500" 3.250" 1.625" $1500
(165.10) (31.75) (209.55) (139.70) (82.55) (41.27)
A2-8 3J-60 78150000000000 A2-8 6.000" 1.250" 8.250" 5.500" 3.250" 1.750" $1700
(152.40) (31.75) (209.55) (139.70) (82.55) (44.45)
Note: A link-up adapter is required for these chucks. (Millimeters in Parentheses) * For sub-spindle application.

Collet and Collet Slot Spanners

Collet Slot Collet Spanner
Collet Spanner Price Replacement Finger Price
Style Part Number Set
5C 78990000000000 $28.00 7899000000FNGR $5.40
16C 7901000000003J $37.75 7901000000FNGR $5.40
3J 7901000000003J $37.75 7901000000FNGR $5.40

13
PULL-BACK DESIGN STYLE “S”

Collet Adaptation Chucks for CNC Lathes

Collets and pads sold separately

unless indicated otherwise.

Collet Adaptation Chucks Plain and Stepped - Dimensions

Spindle- Assembly Spindle Length L Length L2 Flange OD Nose OD Collet Thru- Price
to-Collet Part Number Capacity
A2-5 S15-55 78230000000000 A2-5 5.500" (139.70) 1.000" (25.40) 5.250" (133.35) 3.250" (82.55) 1.500" (38.10) $1880
A2-6 S20 78370000000200* A2-6 5.500" (139.70) 1.125" (28.57) 6.500" (165.10) 4.250" (107.95) 2.000" (50.80) $3230
A2-6 S26-65 97Z0000909619N* A2-6 6.500" (165.10) 1.125" (28.57) 6.500" (165.10) 5.250" (133.35) 2.625" (66.67) $3230
A2-6 S30 97Z0000907816N* A2-6 7.125" (180.98) 1.125" (28.57) 6.500" (165.10) 5.500" (139.70) 3.000" (76.20) $3450
A2-8 S26 78370000000300* A2-8 6.250" (158.75) 1.250" (31.75) 8.250" (209.55) 5.500" (139.70) 2.625" (66.67) $3610
A2-8 S30 97Z0000909352P* A2-8 7.125" (180.97) 1.250" (31.75) 8.250" (209.55) 5.500" (139.70) 3.000" (76.20) $3470
Note: Collet Chucks require a link-up. * Master collet included with collet adaptation chuck. Pads sold separately. (Millimeters in parentheses)

Collet Slot Spanners

Collet Collet Slot Spanner
Style Part Number Price
S15 79010000000S15 $67.25
S20 79010000000S20 $68.75
S26 79010000000S26 $75.25
S30 79010000000S30 $78.50

14
 SPINDLE-TO-SPINDLE

Collet Adaptation Chucks for CNC Lathes

A2-6 to A2-5 16C

A2-6 to A2-5 16C
Collets sold separately A2-8 to A2-5 16C

Spindle-to-Spindle Collet Adaptation Chucks – Dimensions

Spindle- Assembly Spindle Length L Length L2 Flange OD Nose OD Thru- Price
to Collet Part Number Capacity
A2-5 to A2-5 16C 78330000000000 A2-5 6.125" (155.57) — 5.250" (133.35) — 1.625" (41.27) $2240
A2-6 to A2-5 16C 79030000000000 A2-6 6.000" (152.40) 1.125" (28.57) 6.500" (165.10) 5.250" (133.35) 1.625" (41.27) $2560
A2-8 to A2-5 16C 97Z0000900546N A2-8 6.000" (152.40) 1.250" (31.75) 8.250" (209.55) 5.250" (133.35) 1.625" (41.27) $2860
Note: A link-up adapter is required for these chucks. (Millimeters in Parentheses)

Flange Nose
DEAD-LENGTH® DESIGN

Collets sold separately

Dead-Length Collet Adaptation Chuck – Lathe Collets

Assembly
Spindle-to-Collet Part Number Spindle OAL L Flange OD Nose OD Thru-Capacity Price
5C Standard 5C Collets
A5-5C-DL 780300000005HB A2-5 5.250" (133.35) 5.250" (133.35) 2.500" (63.50) 1.062" (26.97) $3580
A6-5C-DL 780500000005HB A2-6 5.750" (146.05) 6.500" (165.10) 2.500" (63.50) 1.062" (26.97) $3620
16C Standard 16C Collets
A6-16C-DL 781900000005HB A2-6 6.750" (171.45) 6.500" (165.10) 3.750" (95.25) 1.625" (41.27) $4000
A8-16C-DL 782100000005HB A2-8 6.750" (171.45) 8.250" (209.55) 3.750" (95.25) 1.625" (41.27) $4100
16C Small Body, Standard 16C Collets
A5-16C-DLS 781700000005HB A2-5 6.125" (155.58) 5.250" (133.35) 3.375" (85.73) 1.625" (41.27) $3890
3J Standard 3J Collets
A6-3J-DL 781300000005HB A2-6 6.187" (157.14) 6.500" (165.10) 3.750" (95.25) 1.750" (44.45) $4200
A8-3J-DL 781500000005HB A2-8 6.187" (157.14) 8.250" (209.55) 3.750" (95.25) 1.750" (44.45) $4300
3J Small Body, Standard 3J Collets
A5-3J-DLS 781100000005HB A2-5 5.562" (141.27) 5.250" (133.35) 3.750" (95.25) 1.750" (44.45) $4100
Note: Overall length (OAL) is for chuck assembly only. OAL may vary depending on spindle mount. (Millimeters in Parentheses)

15
 Traverse City,
Michigan
Xian,
China
Elgin, Elmira,
Illinois New York Wuhan,
Chongqing,
Bron, China
Krefeld, China
France Germany Jiaxing,
Shenyang, China
Leicester, Erkrath, China
England Germany Shanghai,
China

Hardinge Corporate
Berwyn,
Pennsylvania

Hyderabad,
India
Noisy-Le-Sec,
Guangzhou,
France
China
Nan Tou,
Taiwan
St. Gallen,
Switzerland

Hardinge Companies Worldwide

Hardinge is a leading international Americas Asia Europe

provider of advanced metal- Hardinge Corporate China Germany
cutting solutions. We provide a 1235 Westlakes Drive Hardinge Machine Hardinge GmbH
Suite 410 (Shanghai)Co. Ltd. Fichtenhain A 13c
full spectrum of highly reliable Berwyn, PA 19312 1388 East Kangqiao Road 47807 Krefeld
CNC turning, milling, and grinding Pudong , Shanghai 201319 P. 49 2151 49649 10
machines as well as technologically Hardinge P. 0086 21 3810 8686 E. [email protected]
One Hardinge Drive
advanced workholding accessories.
Elmira, NY 14903 Taiwan Switzerland
P. 800-843-8801 Hardinge Taiwan Preci- L. Kellenberger & Co. AG
The diverse products we offer E. [email protected] sion Machinery Limited Heiligkreuzstrasse 28
enable us to support a variety of www.hardinge.com 4 Tzu Chiang 3rd Road CH 9008 St. Gallen
Nan Tou City 540 Switzerland
market applications in industries Hardinge Taiwan P. 41 71 2429111
including aerospace, agricultural, 1524 Davis Road P. 886 49 2260 536 E. [email protected]
automotive, construction, consumer Elgin, IL 60123 E. [email protected]
products, defense, energy, medical, P. 800.843.880 United Kingdom
Jones & Shipman
technology, transportation and more. Hardinge Ltd.
Murray Field Road
We’ve developed a strong global Leicester LE3 1UW
P. 44 116 201 3000
presence with manufacturing
E. [email protected]
operations in North America,
Europe, and Asia. Hardinge applies
its engineering and applications
expertise to provide your company All prices and specifications are subject to change
with the right machine tool solution without notice. All marks indicated by ® and ™ are
trademarks of their respective owners. #2382N
and support every time. Litho in USA © Hardinge Inc. 2018 • May 2018

800-843-8801 • [email protected] • [email protected] • [email protected]

www.hardinge.com • www.shophardinge.com
16